forked from Minki/linux
6ca2aeb27b
CHV has a programmable CSC unit on the pipe B sprites. Program the unit appropriately for BT.601 limited range YCbCr to full range RGB color conversion. This matches the programming we currently do for sprites on the other pipes and on other platforms. It seems the CSC only works when the input data is YCbCr. For RGB pixel formats it doesn't matter what we program into the CSC registers. Doesn't make much sense to me especially since the register names give the impression that RGB input data would also work. But that's how it behaves here. In the review discussions there's been some nice math to explain the values obtained here. First about the YCbCr->RGB matrix: "I had the RGB->YCbCr matrix, inverted it and the values came out. But they should match the wikipedia article. Also keep in mind that the coefficients are in .12 in fixed point format, hence we need a 1<<12 factor. So let's try it: Kb=.114 Kr=.299 (1<<12) * 255/219 ~= 4769 -(1<<12) * 255/112*(1-Kb)*Kb/(1-Kb-Kr) ~= -1605 -(1<<12) * 255/112*(1-Kr)*Kr/(1-Kb-Kr) ~= -3330 (1<<12) * 255/112*(1-Kr) ~= 6537 (1<<12) * 255/112*(1-Kb) ~= 8263 "Looks like the same values to me." And then about the limits used for clamping: "> where did you get these min/max? "The hardware apparently deals in 10bit values, so we need to multiply everything by 4 when we start with the 8bit min/max values. Y = [16:235] * 4 = [64:940] CbCr = ([16:240] - 128) * 4 = [-112:112] * 4 = [-448:448] "The -128 being the -0.5 bias that the hardware already applied before the data entered the CSC unit." Raw data is also supplied in 10bpc in the registers. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by Rodrigo Vivi <rodrigo.vivi@intel.com> [danvet: Copypaste explanations&math from the review discussion.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
1723 lines
47 KiB
C
1723 lines
47 KiB
C
/*
|
|
* Copyright © 2011 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
*
|
|
* New plane/sprite handling.
|
|
*
|
|
* The older chips had a separate interface for programming plane related
|
|
* registers; newer ones are much simpler and we can use the new DRM plane
|
|
* support.
|
|
*/
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_fourcc.h>
|
|
#include <drm/drm_rect.h>
|
|
#include "intel_drv.h"
|
|
#include <drm/i915_drm.h>
|
|
#include "i915_drv.h"
|
|
|
|
static bool
|
|
format_is_yuv(uint32_t format)
|
|
{
|
|
switch (format) {
|
|
case DRM_FORMAT_YUYV:
|
|
case DRM_FORMAT_UYVY:
|
|
case DRM_FORMAT_VYUY:
|
|
case DRM_FORMAT_YVYU:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int usecs_to_scanlines(const struct drm_display_mode *mode, int usecs)
|
|
{
|
|
/* paranoia */
|
|
if (!mode->crtc_htotal)
|
|
return 1;
|
|
|
|
return DIV_ROUND_UP(usecs * mode->crtc_clock, 1000 * mode->crtc_htotal);
|
|
}
|
|
|
|
static bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl_count)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
const struct drm_display_mode *mode = &crtc->config.adjusted_mode;
|
|
enum pipe pipe = crtc->pipe;
|
|
long timeout = msecs_to_jiffies_timeout(1);
|
|
int scanline, min, max, vblank_start;
|
|
wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
|
|
DEFINE_WAIT(wait);
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&crtc->base.mutex));
|
|
|
|
vblank_start = mode->crtc_vblank_start;
|
|
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
|
|
vblank_start = DIV_ROUND_UP(vblank_start, 2);
|
|
|
|
/* FIXME needs to be calibrated sensibly */
|
|
min = vblank_start - usecs_to_scanlines(mode, 100);
|
|
max = vblank_start - 1;
|
|
|
|
if (min <= 0 || max <= 0)
|
|
return false;
|
|
|
|
if (WARN_ON(drm_vblank_get(dev, pipe)))
|
|
return false;
|
|
|
|
local_irq_disable();
|
|
|
|
trace_i915_pipe_update_start(crtc, min, max);
|
|
|
|
for (;;) {
|
|
/*
|
|
* prepare_to_wait() has a memory barrier, which guarantees
|
|
* other CPUs can see the task state update by the time we
|
|
* read the scanline.
|
|
*/
|
|
prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
|
|
|
|
scanline = intel_get_crtc_scanline(crtc);
|
|
if (scanline < min || scanline > max)
|
|
break;
|
|
|
|
if (timeout <= 0) {
|
|
DRM_ERROR("Potential atomic update failure on pipe %c\n",
|
|
pipe_name(crtc->pipe));
|
|
break;
|
|
}
|
|
|
|
local_irq_enable();
|
|
|
|
timeout = schedule_timeout(timeout);
|
|
|
|
local_irq_disable();
|
|
}
|
|
|
|
finish_wait(wq, &wait);
|
|
|
|
drm_vblank_put(dev, pipe);
|
|
|
|
*start_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
|
|
|
|
trace_i915_pipe_update_vblank_evaded(crtc, min, max, *start_vbl_count);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
enum pipe pipe = crtc->pipe;
|
|
u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
|
|
|
|
trace_i915_pipe_update_end(crtc, end_vbl_count);
|
|
|
|
local_irq_enable();
|
|
|
|
if (start_vbl_count != end_vbl_count)
|
|
DRM_ERROR("Atomic update failure on pipe %c (start=%u end=%u)\n",
|
|
pipe_name(pipe), start_vbl_count, end_vbl_count);
|
|
}
|
|
|
|
static void intel_update_primary_plane(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
|
|
int reg = DSPCNTR(crtc->plane);
|
|
|
|
if (crtc->primary_enabled)
|
|
I915_WRITE(reg, I915_READ(reg) | DISPLAY_PLANE_ENABLE);
|
|
else
|
|
I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE);
|
|
}
|
|
|
|
static void
|
|
skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
|
|
unsigned int crtc_w, unsigned int crtc_h,
|
|
uint32_t x, uint32_t y,
|
|
uint32_t src_w, uint32_t src_h)
|
|
{
|
|
struct drm_device *dev = drm_plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
|
|
const int pipe = intel_plane->pipe;
|
|
const int plane = intel_plane->plane + 1;
|
|
u32 plane_ctl, stride;
|
|
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
|
|
|
|
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
|
|
|
|
/* Mask out pixel format bits in case we change it */
|
|
plane_ctl &= ~PLANE_CTL_FORMAT_MASK;
|
|
plane_ctl &= ~PLANE_CTL_ORDER_RGBX;
|
|
plane_ctl &= ~PLANE_CTL_YUV422_ORDER_MASK;
|
|
plane_ctl &= ~PLANE_CTL_TILED_MASK;
|
|
plane_ctl &= ~PLANE_CTL_ALPHA_MASK;
|
|
plane_ctl &= ~PLANE_CTL_ROTATE_MASK;
|
|
|
|
/* Trickle feed has to be enabled */
|
|
plane_ctl &= ~PLANE_CTL_TRICKLE_FEED_DISABLE;
|
|
|
|
switch (fb->pixel_format) {
|
|
case DRM_FORMAT_RGB565:
|
|
plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
|
|
break;
|
|
case DRM_FORMAT_XBGR8888:
|
|
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
|
|
break;
|
|
case DRM_FORMAT_XRGB8888:
|
|
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
|
|
break;
|
|
/*
|
|
* XXX: For ARBG/ABGR formats we default to expecting scanout buffers
|
|
* to be already pre-multiplied. We need to add a knob (or a different
|
|
* DRM_FORMAT) for user-space to configure that.
|
|
*/
|
|
case DRM_FORMAT_ABGR8888:
|
|
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 |
|
|
PLANE_CTL_ORDER_RGBX |
|
|
PLANE_CTL_ALPHA_SW_PREMULTIPLY;
|
|
break;
|
|
case DRM_FORMAT_ARGB8888:
|
|
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 |
|
|
PLANE_CTL_ALPHA_SW_PREMULTIPLY;
|
|
break;
|
|
case DRM_FORMAT_YUYV:
|
|
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
|
|
break;
|
|
case DRM_FORMAT_YVYU:
|
|
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
|
|
break;
|
|
case DRM_FORMAT_UYVY:
|
|
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
|
|
break;
|
|
case DRM_FORMAT_VYUY:
|
|
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
switch (obj->tiling_mode) {
|
|
case I915_TILING_NONE:
|
|
stride = fb->pitches[0] >> 6;
|
|
break;
|
|
case I915_TILING_X:
|
|
plane_ctl |= PLANE_CTL_TILED_X;
|
|
stride = fb->pitches[0] >> 9;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
if (intel_plane->rotation == BIT(DRM_ROTATE_180))
|
|
plane_ctl |= PLANE_CTL_ROTATE_180;
|
|
|
|
plane_ctl |= PLANE_CTL_ENABLE;
|
|
plane_ctl |= PLANE_CTL_PIPE_CSC_ENABLE;
|
|
|
|
intel_update_sprite_watermarks(drm_plane, crtc, src_w, src_h,
|
|
pixel_size, true,
|
|
src_w != crtc_w || src_h != crtc_h);
|
|
|
|
/* Sizes are 0 based */
|
|
src_w--;
|
|
src_h--;
|
|
crtc_w--;
|
|
crtc_h--;
|
|
|
|
I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
|
|
I915_WRITE(PLANE_STRIDE(pipe, plane), stride);
|
|
I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
|
|
I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
|
|
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
|
|
I915_WRITE(PLANE_SURF(pipe, plane), i915_gem_obj_ggtt_offset(obj));
|
|
POSTING_READ(PLANE_SURF(pipe, plane));
|
|
}
|
|
|
|
static void
|
|
skl_disable_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = drm_plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
|
|
const int pipe = intel_plane->pipe;
|
|
const int plane = intel_plane->plane + 1;
|
|
|
|
I915_WRITE(PLANE_CTL(pipe, plane),
|
|
I915_READ(PLANE_CTL(pipe, plane)) & ~PLANE_CTL_ENABLE);
|
|
|
|
/* Activate double buffered register update */
|
|
I915_WRITE(PLANE_CTL(pipe, plane), 0);
|
|
POSTING_READ(PLANE_CTL(pipe, plane));
|
|
|
|
intel_update_sprite_watermarks(drm_plane, crtc, 0, 0, 0, false, false);
|
|
}
|
|
|
|
static int
|
|
skl_update_colorkey(struct drm_plane *drm_plane,
|
|
struct drm_intel_sprite_colorkey *key)
|
|
{
|
|
struct drm_device *dev = drm_plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
|
|
const int pipe = intel_plane->pipe;
|
|
const int plane = intel_plane->plane;
|
|
u32 plane_ctl;
|
|
|
|
I915_WRITE(PLANE_KEYVAL(pipe, plane), key->min_value);
|
|
I915_WRITE(PLANE_KEYMAX(pipe, plane), key->max_value);
|
|
I915_WRITE(PLANE_KEYMSK(pipe, plane), key->channel_mask);
|
|
|
|
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
|
|
plane_ctl &= ~PLANE_CTL_KEY_ENABLE_MASK;
|
|
if (key->flags & I915_SET_COLORKEY_DESTINATION)
|
|
plane_ctl |= PLANE_CTL_KEY_ENABLE_DESTINATION;
|
|
else if (key->flags & I915_SET_COLORKEY_SOURCE)
|
|
plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;
|
|
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
|
|
|
|
POSTING_READ(PLANE_CTL(pipe, plane));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
skl_get_colorkey(struct drm_plane *drm_plane,
|
|
struct drm_intel_sprite_colorkey *key)
|
|
{
|
|
struct drm_device *dev = drm_plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
|
|
const int pipe = intel_plane->pipe;
|
|
const int plane = intel_plane->plane;
|
|
u32 plane_ctl;
|
|
|
|
key->min_value = I915_READ(PLANE_KEYVAL(pipe, plane));
|
|
key->max_value = I915_READ(PLANE_KEYMAX(pipe, plane));
|
|
key->channel_mask = I915_READ(PLANE_KEYMSK(pipe, plane));
|
|
|
|
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
|
|
|
|
switch (plane_ctl & PLANE_CTL_KEY_ENABLE_MASK) {
|
|
case PLANE_CTL_KEY_ENABLE_DESTINATION:
|
|
key->flags = I915_SET_COLORKEY_DESTINATION;
|
|
break;
|
|
case PLANE_CTL_KEY_ENABLE_SOURCE:
|
|
key->flags = I915_SET_COLORKEY_SOURCE;
|
|
break;
|
|
default:
|
|
key->flags = I915_SET_COLORKEY_NONE;
|
|
}
|
|
}
|
|
|
|
static void
|
|
chv_update_csc(struct intel_plane *intel_plane, uint32_t format)
|
|
{
|
|
struct drm_i915_private *dev_priv = intel_plane->base.dev->dev_private;
|
|
int plane = intel_plane->plane;
|
|
|
|
/* Seems RGB data bypasses the CSC always */
|
|
if (!format_is_yuv(format))
|
|
return;
|
|
|
|
/*
|
|
* BT.601 limited range YCbCr -> full range RGB
|
|
*
|
|
* |r| | 6537 4769 0| |cr |
|
|
* |g| = |-3330 4769 -1605| x |y-64|
|
|
* |b| | 0 4769 8263| |cb |
|
|
*
|
|
* Cb and Cr apparently come in as signed already, so no
|
|
* need for any offset. For Y we need to remove the offset.
|
|
*/
|
|
I915_WRITE(SPCSCYGOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(-64));
|
|
I915_WRITE(SPCSCCBOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0));
|
|
I915_WRITE(SPCSCCROFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0));
|
|
|
|
I915_WRITE(SPCSCC01(plane), SPCSC_C1(4769) | SPCSC_C0(6537));
|
|
I915_WRITE(SPCSCC23(plane), SPCSC_C1(-3330) | SPCSC_C0(0));
|
|
I915_WRITE(SPCSCC45(plane), SPCSC_C1(-1605) | SPCSC_C0(4769));
|
|
I915_WRITE(SPCSCC67(plane), SPCSC_C1(4769) | SPCSC_C0(0));
|
|
I915_WRITE(SPCSCC8(plane), SPCSC_C0(8263));
|
|
|
|
I915_WRITE(SPCSCYGICLAMP(plane), SPCSC_IMAX(940) | SPCSC_IMIN(64));
|
|
I915_WRITE(SPCSCCBICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
|
|
I915_WRITE(SPCSCCRICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
|
|
|
|
I915_WRITE(SPCSCYGOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
|
|
I915_WRITE(SPCSCCBOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
|
|
I915_WRITE(SPCSCCROCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
|
|
}
|
|
|
|
static void
|
|
vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
|
|
unsigned int crtc_w, unsigned int crtc_h,
|
|
uint32_t x, uint32_t y,
|
|
uint32_t src_w, uint32_t src_h)
|
|
{
|
|
struct drm_device *dev = dplane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(dplane);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_plane->pipe;
|
|
int plane = intel_plane->plane;
|
|
u32 sprctl;
|
|
unsigned long sprsurf_offset, linear_offset;
|
|
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
|
|
u32 start_vbl_count;
|
|
bool atomic_update;
|
|
|
|
sprctl = I915_READ(SPCNTR(pipe, plane));
|
|
|
|
/* Mask out pixel format bits in case we change it */
|
|
sprctl &= ~SP_PIXFORMAT_MASK;
|
|
sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
|
|
sprctl &= ~SP_TILED;
|
|
sprctl &= ~SP_ROTATE_180;
|
|
|
|
switch (fb->pixel_format) {
|
|
case DRM_FORMAT_YUYV:
|
|
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YUYV;
|
|
break;
|
|
case DRM_FORMAT_YVYU:
|
|
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YVYU;
|
|
break;
|
|
case DRM_FORMAT_UYVY:
|
|
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_UYVY;
|
|
break;
|
|
case DRM_FORMAT_VYUY:
|
|
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_VYUY;
|
|
break;
|
|
case DRM_FORMAT_RGB565:
|
|
sprctl |= SP_FORMAT_BGR565;
|
|
break;
|
|
case DRM_FORMAT_XRGB8888:
|
|
sprctl |= SP_FORMAT_BGRX8888;
|
|
break;
|
|
case DRM_FORMAT_ARGB8888:
|
|
sprctl |= SP_FORMAT_BGRA8888;
|
|
break;
|
|
case DRM_FORMAT_XBGR2101010:
|
|
sprctl |= SP_FORMAT_RGBX1010102;
|
|
break;
|
|
case DRM_FORMAT_ABGR2101010:
|
|
sprctl |= SP_FORMAT_RGBA1010102;
|
|
break;
|
|
case DRM_FORMAT_XBGR8888:
|
|
sprctl |= SP_FORMAT_RGBX8888;
|
|
break;
|
|
case DRM_FORMAT_ABGR8888:
|
|
sprctl |= SP_FORMAT_RGBA8888;
|
|
break;
|
|
default:
|
|
/*
|
|
* If we get here one of the upper layers failed to filter
|
|
* out the unsupported plane formats
|
|
*/
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Enable gamma to match primary/cursor plane behaviour.
|
|
* FIXME should be user controllable via propertiesa.
|
|
*/
|
|
sprctl |= SP_GAMMA_ENABLE;
|
|
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
sprctl |= SP_TILED;
|
|
|
|
sprctl |= SP_ENABLE;
|
|
|
|
intel_update_sprite_watermarks(dplane, crtc, src_w, src_h,
|
|
pixel_size, true,
|
|
src_w != crtc_w || src_h != crtc_h);
|
|
|
|
/* Sizes are 0 based */
|
|
src_w--;
|
|
src_h--;
|
|
crtc_w--;
|
|
crtc_h--;
|
|
|
|
linear_offset = y * fb->pitches[0] + x * pixel_size;
|
|
sprsurf_offset = intel_gen4_compute_page_offset(&x, &y,
|
|
obj->tiling_mode,
|
|
pixel_size,
|
|
fb->pitches[0]);
|
|
linear_offset -= sprsurf_offset;
|
|
|
|
if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
|
|
sprctl |= SP_ROTATE_180;
|
|
|
|
x += src_w;
|
|
y += src_h;
|
|
linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
|
|
}
|
|
|
|
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
|
|
|
|
intel_update_primary_plane(intel_crtc);
|
|
|
|
if (IS_CHERRYVIEW(dev) && pipe == PIPE_B)
|
|
chv_update_csc(intel_plane, fb->pixel_format);
|
|
|
|
I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
|
|
I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
|
|
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
I915_WRITE(SPTILEOFF(pipe, plane), (y << 16) | x);
|
|
else
|
|
I915_WRITE(SPLINOFF(pipe, plane), linear_offset);
|
|
|
|
I915_WRITE(SPCONSTALPHA(pipe, plane), 0);
|
|
|
|
I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w);
|
|
I915_WRITE(SPCNTR(pipe, plane), sprctl);
|
|
I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) +
|
|
sprsurf_offset);
|
|
|
|
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
|
|
|
|
if (atomic_update)
|
|
intel_pipe_update_end(intel_crtc, start_vbl_count);
|
|
}
|
|
|
|
static void
|
|
vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = dplane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(dplane);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_plane->pipe;
|
|
int plane = intel_plane->plane;
|
|
u32 start_vbl_count;
|
|
bool atomic_update;
|
|
|
|
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
|
|
|
|
intel_update_primary_plane(intel_crtc);
|
|
|
|
I915_WRITE(SPCNTR(pipe, plane), I915_READ(SPCNTR(pipe, plane)) &
|
|
~SP_ENABLE);
|
|
/* Activate double buffered register update */
|
|
I915_WRITE(SPSURF(pipe, plane), 0);
|
|
|
|
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
|
|
|
|
if (atomic_update)
|
|
intel_pipe_update_end(intel_crtc, start_vbl_count);
|
|
|
|
intel_update_sprite_watermarks(dplane, crtc, 0, 0, 0, false, false);
|
|
}
|
|
|
|
static int
|
|
vlv_update_colorkey(struct drm_plane *dplane,
|
|
struct drm_intel_sprite_colorkey *key)
|
|
{
|
|
struct drm_device *dev = dplane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(dplane);
|
|
int pipe = intel_plane->pipe;
|
|
int plane = intel_plane->plane;
|
|
u32 sprctl;
|
|
|
|
if (key->flags & I915_SET_COLORKEY_DESTINATION)
|
|
return -EINVAL;
|
|
|
|
I915_WRITE(SPKEYMINVAL(pipe, plane), key->min_value);
|
|
I915_WRITE(SPKEYMAXVAL(pipe, plane), key->max_value);
|
|
I915_WRITE(SPKEYMSK(pipe, plane), key->channel_mask);
|
|
|
|
sprctl = I915_READ(SPCNTR(pipe, plane));
|
|
sprctl &= ~SP_SOURCE_KEY;
|
|
if (key->flags & I915_SET_COLORKEY_SOURCE)
|
|
sprctl |= SP_SOURCE_KEY;
|
|
I915_WRITE(SPCNTR(pipe, plane), sprctl);
|
|
|
|
POSTING_READ(SPKEYMSK(pipe, plane));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
vlv_get_colorkey(struct drm_plane *dplane,
|
|
struct drm_intel_sprite_colorkey *key)
|
|
{
|
|
struct drm_device *dev = dplane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(dplane);
|
|
int pipe = intel_plane->pipe;
|
|
int plane = intel_plane->plane;
|
|
u32 sprctl;
|
|
|
|
key->min_value = I915_READ(SPKEYMINVAL(pipe, plane));
|
|
key->max_value = I915_READ(SPKEYMAXVAL(pipe, plane));
|
|
key->channel_mask = I915_READ(SPKEYMSK(pipe, plane));
|
|
|
|
sprctl = I915_READ(SPCNTR(pipe, plane));
|
|
if (sprctl & SP_SOURCE_KEY)
|
|
key->flags = I915_SET_COLORKEY_SOURCE;
|
|
else
|
|
key->flags = I915_SET_COLORKEY_NONE;
|
|
}
|
|
|
|
static void
|
|
ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
|
|
unsigned int crtc_w, unsigned int crtc_h,
|
|
uint32_t x, uint32_t y,
|
|
uint32_t src_w, uint32_t src_h)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_plane->pipe;
|
|
u32 sprctl, sprscale = 0;
|
|
unsigned long sprsurf_offset, linear_offset;
|
|
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
|
|
u32 start_vbl_count;
|
|
bool atomic_update;
|
|
|
|
sprctl = I915_READ(SPRCTL(pipe));
|
|
|
|
/* Mask out pixel format bits in case we change it */
|
|
sprctl &= ~SPRITE_PIXFORMAT_MASK;
|
|
sprctl &= ~SPRITE_RGB_ORDER_RGBX;
|
|
sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
|
|
sprctl &= ~SPRITE_TILED;
|
|
sprctl &= ~SPRITE_ROTATE_180;
|
|
|
|
switch (fb->pixel_format) {
|
|
case DRM_FORMAT_XBGR8888:
|
|
sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX;
|
|
break;
|
|
case DRM_FORMAT_XRGB8888:
|
|
sprctl |= SPRITE_FORMAT_RGBX888;
|
|
break;
|
|
case DRM_FORMAT_YUYV:
|
|
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YUYV;
|
|
break;
|
|
case DRM_FORMAT_YVYU:
|
|
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YVYU;
|
|
break;
|
|
case DRM_FORMAT_UYVY:
|
|
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_UYVY;
|
|
break;
|
|
case DRM_FORMAT_VYUY:
|
|
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_VYUY;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
/*
|
|
* Enable gamma to match primary/cursor plane behaviour.
|
|
* FIXME should be user controllable via propertiesa.
|
|
*/
|
|
sprctl |= SPRITE_GAMMA_ENABLE;
|
|
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
sprctl |= SPRITE_TILED;
|
|
|
|
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
|
|
sprctl &= ~SPRITE_TRICKLE_FEED_DISABLE;
|
|
else
|
|
sprctl |= SPRITE_TRICKLE_FEED_DISABLE;
|
|
|
|
sprctl |= SPRITE_ENABLE;
|
|
|
|
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
|
|
sprctl |= SPRITE_PIPE_CSC_ENABLE;
|
|
|
|
intel_update_sprite_watermarks(plane, crtc, src_w, src_h, pixel_size,
|
|
true,
|
|
src_w != crtc_w || src_h != crtc_h);
|
|
|
|
/* Sizes are 0 based */
|
|
src_w--;
|
|
src_h--;
|
|
crtc_w--;
|
|
crtc_h--;
|
|
|
|
if (crtc_w != src_w || crtc_h != src_h)
|
|
sprscale = SPRITE_SCALE_ENABLE | (src_w << 16) | src_h;
|
|
|
|
linear_offset = y * fb->pitches[0] + x * pixel_size;
|
|
sprsurf_offset =
|
|
intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
|
|
pixel_size, fb->pitches[0]);
|
|
linear_offset -= sprsurf_offset;
|
|
|
|
if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
|
|
sprctl |= SPRITE_ROTATE_180;
|
|
|
|
/* HSW and BDW does this automagically in hardware */
|
|
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
|
|
x += src_w;
|
|
y += src_h;
|
|
linear_offset += src_h * fb->pitches[0] +
|
|
src_w * pixel_size;
|
|
}
|
|
}
|
|
|
|
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
|
|
|
|
intel_update_primary_plane(intel_crtc);
|
|
|
|
I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
|
|
I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
|
|
|
|
/* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
|
|
* register */
|
|
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
|
|
I915_WRITE(SPROFFSET(pipe), (y << 16) | x);
|
|
else if (obj->tiling_mode != I915_TILING_NONE)
|
|
I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
|
|
else
|
|
I915_WRITE(SPRLINOFF(pipe), linear_offset);
|
|
|
|
I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
|
|
if (intel_plane->can_scale)
|
|
I915_WRITE(SPRSCALE(pipe), sprscale);
|
|
I915_WRITE(SPRCTL(pipe), sprctl);
|
|
I915_WRITE(SPRSURF(pipe),
|
|
i915_gem_obj_ggtt_offset(obj) + sprsurf_offset);
|
|
|
|
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
|
|
|
|
if (atomic_update)
|
|
intel_pipe_update_end(intel_crtc, start_vbl_count);
|
|
}
|
|
|
|
static void
|
|
ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_plane->pipe;
|
|
u32 start_vbl_count;
|
|
bool atomic_update;
|
|
|
|
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
|
|
|
|
intel_update_primary_plane(intel_crtc);
|
|
|
|
I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE);
|
|
/* Can't leave the scaler enabled... */
|
|
if (intel_plane->can_scale)
|
|
I915_WRITE(SPRSCALE(pipe), 0);
|
|
/* Activate double buffered register update */
|
|
I915_WRITE(SPRSURF(pipe), 0);
|
|
|
|
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
|
|
|
|
if (atomic_update)
|
|
intel_pipe_update_end(intel_crtc, start_vbl_count);
|
|
|
|
/*
|
|
* Avoid underruns when disabling the sprite.
|
|
* FIXME remove once watermark updates are done properly.
|
|
*/
|
|
intel_wait_for_vblank(dev, pipe);
|
|
|
|
intel_update_sprite_watermarks(plane, crtc, 0, 0, 0, false, false);
|
|
}
|
|
|
|
static int
|
|
ivb_update_colorkey(struct drm_plane *plane,
|
|
struct drm_intel_sprite_colorkey *key)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane;
|
|
u32 sprctl;
|
|
int ret = 0;
|
|
|
|
intel_plane = to_intel_plane(plane);
|
|
|
|
I915_WRITE(SPRKEYVAL(intel_plane->pipe), key->min_value);
|
|
I915_WRITE(SPRKEYMAX(intel_plane->pipe), key->max_value);
|
|
I915_WRITE(SPRKEYMSK(intel_plane->pipe), key->channel_mask);
|
|
|
|
sprctl = I915_READ(SPRCTL(intel_plane->pipe));
|
|
sprctl &= ~(SPRITE_SOURCE_KEY | SPRITE_DEST_KEY);
|
|
if (key->flags & I915_SET_COLORKEY_DESTINATION)
|
|
sprctl |= SPRITE_DEST_KEY;
|
|
else if (key->flags & I915_SET_COLORKEY_SOURCE)
|
|
sprctl |= SPRITE_SOURCE_KEY;
|
|
I915_WRITE(SPRCTL(intel_plane->pipe), sprctl);
|
|
|
|
POSTING_READ(SPRKEYMSK(intel_plane->pipe));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ivb_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane;
|
|
u32 sprctl;
|
|
|
|
intel_plane = to_intel_plane(plane);
|
|
|
|
key->min_value = I915_READ(SPRKEYVAL(intel_plane->pipe));
|
|
key->max_value = I915_READ(SPRKEYMAX(intel_plane->pipe));
|
|
key->channel_mask = I915_READ(SPRKEYMSK(intel_plane->pipe));
|
|
key->flags = 0;
|
|
|
|
sprctl = I915_READ(SPRCTL(intel_plane->pipe));
|
|
|
|
if (sprctl & SPRITE_DEST_KEY)
|
|
key->flags = I915_SET_COLORKEY_DESTINATION;
|
|
else if (sprctl & SPRITE_SOURCE_KEY)
|
|
key->flags = I915_SET_COLORKEY_SOURCE;
|
|
else
|
|
key->flags = I915_SET_COLORKEY_NONE;
|
|
}
|
|
|
|
static void
|
|
ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
|
|
unsigned int crtc_w, unsigned int crtc_h,
|
|
uint32_t x, uint32_t y,
|
|
uint32_t src_w, uint32_t src_h)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_plane->pipe;
|
|
unsigned long dvssurf_offset, linear_offset;
|
|
u32 dvscntr, dvsscale;
|
|
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
|
|
u32 start_vbl_count;
|
|
bool atomic_update;
|
|
|
|
dvscntr = I915_READ(DVSCNTR(pipe));
|
|
|
|
/* Mask out pixel format bits in case we change it */
|
|
dvscntr &= ~DVS_PIXFORMAT_MASK;
|
|
dvscntr &= ~DVS_RGB_ORDER_XBGR;
|
|
dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
|
|
dvscntr &= ~DVS_TILED;
|
|
dvscntr &= ~DVS_ROTATE_180;
|
|
|
|
switch (fb->pixel_format) {
|
|
case DRM_FORMAT_XBGR8888:
|
|
dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR;
|
|
break;
|
|
case DRM_FORMAT_XRGB8888:
|
|
dvscntr |= DVS_FORMAT_RGBX888;
|
|
break;
|
|
case DRM_FORMAT_YUYV:
|
|
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YUYV;
|
|
break;
|
|
case DRM_FORMAT_YVYU:
|
|
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YVYU;
|
|
break;
|
|
case DRM_FORMAT_UYVY:
|
|
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_UYVY;
|
|
break;
|
|
case DRM_FORMAT_VYUY:
|
|
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_VYUY;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
/*
|
|
* Enable gamma to match primary/cursor plane behaviour.
|
|
* FIXME should be user controllable via propertiesa.
|
|
*/
|
|
dvscntr |= DVS_GAMMA_ENABLE;
|
|
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
dvscntr |= DVS_TILED;
|
|
|
|
if (IS_GEN6(dev))
|
|
dvscntr |= DVS_TRICKLE_FEED_DISABLE; /* must disable */
|
|
dvscntr |= DVS_ENABLE;
|
|
|
|
intel_update_sprite_watermarks(plane, crtc, src_w, src_h,
|
|
pixel_size, true,
|
|
src_w != crtc_w || src_h != crtc_h);
|
|
|
|
/* Sizes are 0 based */
|
|
src_w--;
|
|
src_h--;
|
|
crtc_w--;
|
|
crtc_h--;
|
|
|
|
dvsscale = 0;
|
|
if (crtc_w != src_w || crtc_h != src_h)
|
|
dvsscale = DVS_SCALE_ENABLE | (src_w << 16) | src_h;
|
|
|
|
linear_offset = y * fb->pitches[0] + x * pixel_size;
|
|
dvssurf_offset =
|
|
intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
|
|
pixel_size, fb->pitches[0]);
|
|
linear_offset -= dvssurf_offset;
|
|
|
|
if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
|
|
dvscntr |= DVS_ROTATE_180;
|
|
|
|
x += src_w;
|
|
y += src_h;
|
|
linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
|
|
}
|
|
|
|
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
|
|
|
|
intel_update_primary_plane(intel_crtc);
|
|
|
|
I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
|
|
I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
|
|
|
|
if (obj->tiling_mode != I915_TILING_NONE)
|
|
I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x);
|
|
else
|
|
I915_WRITE(DVSLINOFF(pipe), linear_offset);
|
|
|
|
I915_WRITE(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
|
|
I915_WRITE(DVSSCALE(pipe), dvsscale);
|
|
I915_WRITE(DVSCNTR(pipe), dvscntr);
|
|
I915_WRITE(DVSSURF(pipe),
|
|
i915_gem_obj_ggtt_offset(obj) + dvssurf_offset);
|
|
|
|
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
|
|
|
|
if (atomic_update)
|
|
intel_pipe_update_end(intel_crtc, start_vbl_count);
|
|
}
|
|
|
|
static void
|
|
ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int pipe = intel_plane->pipe;
|
|
u32 start_vbl_count;
|
|
bool atomic_update;
|
|
|
|
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
|
|
|
|
intel_update_primary_plane(intel_crtc);
|
|
|
|
I915_WRITE(DVSCNTR(pipe), I915_READ(DVSCNTR(pipe)) & ~DVS_ENABLE);
|
|
/* Disable the scaler */
|
|
I915_WRITE(DVSSCALE(pipe), 0);
|
|
/* Flush double buffered register updates */
|
|
I915_WRITE(DVSSURF(pipe), 0);
|
|
|
|
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
|
|
|
|
if (atomic_update)
|
|
intel_pipe_update_end(intel_crtc, start_vbl_count);
|
|
|
|
/*
|
|
* Avoid underruns when disabling the sprite.
|
|
* FIXME remove once watermark updates are done properly.
|
|
*/
|
|
intel_wait_for_vblank(dev, pipe);
|
|
|
|
intel_update_sprite_watermarks(plane, crtc, 0, 0, 0, false, false);
|
|
}
|
|
|
|
static void
|
|
intel_post_enable_primary(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
/*
|
|
* BDW signals flip done immediately if the plane
|
|
* is disabled, even if the plane enable is already
|
|
* armed to occur at the next vblank :(
|
|
*/
|
|
if (IS_BROADWELL(dev))
|
|
intel_wait_for_vblank(dev, intel_crtc->pipe);
|
|
|
|
/*
|
|
* FIXME IPS should be fine as long as one plane is
|
|
* enabled, but in practice it seems to have problems
|
|
* when going from primary only to sprite only and vice
|
|
* versa.
|
|
*/
|
|
hsw_enable_ips(intel_crtc);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_update_fbc(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
|
|
static void
|
|
intel_pre_disable_primary(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
if (dev_priv->fbc.plane == intel_crtc->plane)
|
|
intel_disable_fbc(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
/*
|
|
* FIXME IPS should be fine as long as one plane is
|
|
* enabled, but in practice it seems to have problems
|
|
* when going from primary only to sprite only and vice
|
|
* versa.
|
|
*/
|
|
hsw_disable_ips(intel_crtc);
|
|
}
|
|
|
|
static int
|
|
ilk_update_colorkey(struct drm_plane *plane,
|
|
struct drm_intel_sprite_colorkey *key)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane;
|
|
u32 dvscntr;
|
|
int ret = 0;
|
|
|
|
intel_plane = to_intel_plane(plane);
|
|
|
|
I915_WRITE(DVSKEYVAL(intel_plane->pipe), key->min_value);
|
|
I915_WRITE(DVSKEYMAX(intel_plane->pipe), key->max_value);
|
|
I915_WRITE(DVSKEYMSK(intel_plane->pipe), key->channel_mask);
|
|
|
|
dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
|
|
dvscntr &= ~(DVS_SOURCE_KEY | DVS_DEST_KEY);
|
|
if (key->flags & I915_SET_COLORKEY_DESTINATION)
|
|
dvscntr |= DVS_DEST_KEY;
|
|
else if (key->flags & I915_SET_COLORKEY_SOURCE)
|
|
dvscntr |= DVS_SOURCE_KEY;
|
|
I915_WRITE(DVSCNTR(intel_plane->pipe), dvscntr);
|
|
|
|
POSTING_READ(DVSKEYMSK(intel_plane->pipe));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ilk_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_plane *intel_plane;
|
|
u32 dvscntr;
|
|
|
|
intel_plane = to_intel_plane(plane);
|
|
|
|
key->min_value = I915_READ(DVSKEYVAL(intel_plane->pipe));
|
|
key->max_value = I915_READ(DVSKEYMAX(intel_plane->pipe));
|
|
key->channel_mask = I915_READ(DVSKEYMSK(intel_plane->pipe));
|
|
key->flags = 0;
|
|
|
|
dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
|
|
|
|
if (dvscntr & DVS_DEST_KEY)
|
|
key->flags = I915_SET_COLORKEY_DESTINATION;
|
|
else if (dvscntr & DVS_SOURCE_KEY)
|
|
key->flags = I915_SET_COLORKEY_SOURCE;
|
|
else
|
|
key->flags = I915_SET_COLORKEY_NONE;
|
|
}
|
|
|
|
static bool colorkey_enabled(struct intel_plane *intel_plane)
|
|
{
|
|
struct drm_intel_sprite_colorkey key;
|
|
|
|
intel_plane->get_colorkey(&intel_plane->base, &key);
|
|
|
|
return key.flags != I915_SET_COLORKEY_NONE;
|
|
}
|
|
|
|
static int
|
|
intel_check_sprite_plane(struct drm_plane *plane,
|
|
struct intel_plane_state *state)
|
|
{
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(state->crtc);
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
struct drm_framebuffer *fb = state->fb;
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
|
|
int crtc_x, crtc_y;
|
|
unsigned int crtc_w, crtc_h;
|
|
uint32_t src_x, src_y, src_w, src_h;
|
|
struct drm_rect *src = &state->src;
|
|
struct drm_rect *dst = &state->dst;
|
|
struct drm_rect *orig_src = &state->orig_src;
|
|
const struct drm_rect *clip = &state->clip;
|
|
int hscale, vscale;
|
|
int max_scale, min_scale;
|
|
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
|
|
|
|
/* Don't modify another pipe's plane */
|
|
if (intel_plane->pipe != intel_crtc->pipe) {
|
|
DRM_DEBUG_KMS("Wrong plane <-> crtc mapping\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* FIXME check all gen limits */
|
|
if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384) {
|
|
DRM_DEBUG_KMS("Unsuitable framebuffer for plane\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Sprite planes can be linear or x-tiled surfaces */
|
|
switch (obj->tiling_mode) {
|
|
case I915_TILING_NONE:
|
|
case I915_TILING_X:
|
|
break;
|
|
default:
|
|
DRM_DEBUG_KMS("Unsupported tiling mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* FIXME the following code does a bunch of fuzzy adjustments to the
|
|
* coordinates and sizes. We probably need some way to decide whether
|
|
* more strict checking should be done instead.
|
|
*/
|
|
max_scale = intel_plane->max_downscale << 16;
|
|
min_scale = intel_plane->can_scale ? 1 : (1 << 16);
|
|
|
|
drm_rect_rotate(src, fb->width << 16, fb->height << 16,
|
|
intel_plane->rotation);
|
|
|
|
hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
|
|
BUG_ON(hscale < 0);
|
|
|
|
vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
|
|
BUG_ON(vscale < 0);
|
|
|
|
state->visible = drm_rect_clip_scaled(src, dst, clip, hscale, vscale);
|
|
|
|
crtc_x = dst->x1;
|
|
crtc_y = dst->y1;
|
|
crtc_w = drm_rect_width(dst);
|
|
crtc_h = drm_rect_height(dst);
|
|
|
|
if (state->visible) {
|
|
/* check again in case clipping clamped the results */
|
|
hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
|
|
if (hscale < 0) {
|
|
DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
|
|
drm_rect_debug_print(src, true);
|
|
drm_rect_debug_print(dst, false);
|
|
|
|
return hscale;
|
|
}
|
|
|
|
vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
|
|
if (vscale < 0) {
|
|
DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
|
|
drm_rect_debug_print(src, true);
|
|
drm_rect_debug_print(dst, false);
|
|
|
|
return vscale;
|
|
}
|
|
|
|
/* Make the source viewport size an exact multiple of the scaling factors. */
|
|
drm_rect_adjust_size(src,
|
|
drm_rect_width(dst) * hscale - drm_rect_width(src),
|
|
drm_rect_height(dst) * vscale - drm_rect_height(src));
|
|
|
|
drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
|
|
intel_plane->rotation);
|
|
|
|
/* sanity check to make sure the src viewport wasn't enlarged */
|
|
WARN_ON(src->x1 < (int) orig_src->x1 ||
|
|
src->y1 < (int) orig_src->y1 ||
|
|
src->x2 > (int) orig_src->x2 ||
|
|
src->y2 > (int) orig_src->y2);
|
|
|
|
/*
|
|
* Hardware doesn't handle subpixel coordinates.
|
|
* Adjust to (macro)pixel boundary, but be careful not to
|
|
* increase the source viewport size, because that could
|
|
* push the downscaling factor out of bounds.
|
|
*/
|
|
src_x = src->x1 >> 16;
|
|
src_w = drm_rect_width(src) >> 16;
|
|
src_y = src->y1 >> 16;
|
|
src_h = drm_rect_height(src) >> 16;
|
|
|
|
if (format_is_yuv(fb->pixel_format)) {
|
|
src_x &= ~1;
|
|
src_w &= ~1;
|
|
|
|
/*
|
|
* Must keep src and dst the
|
|
* same if we can't scale.
|
|
*/
|
|
if (!intel_plane->can_scale)
|
|
crtc_w &= ~1;
|
|
|
|
if (crtc_w == 0)
|
|
state->visible = false;
|
|
}
|
|
}
|
|
|
|
/* Check size restrictions when scaling */
|
|
if (state->visible && (src_w != crtc_w || src_h != crtc_h)) {
|
|
unsigned int width_bytes;
|
|
|
|
WARN_ON(!intel_plane->can_scale);
|
|
|
|
/* FIXME interlacing min height is 6 */
|
|
|
|
if (crtc_w < 3 || crtc_h < 3)
|
|
state->visible = false;
|
|
|
|
if (src_w < 3 || src_h < 3)
|
|
state->visible = false;
|
|
|
|
width_bytes = ((src_x * pixel_size) & 63) +
|
|
src_w * pixel_size;
|
|
|
|
if (src_w > 2048 || src_h > 2048 ||
|
|
width_bytes > 4096 || fb->pitches[0] > 4096) {
|
|
DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (state->visible) {
|
|
src->x1 = src_x;
|
|
src->x2 = src_x + src_w;
|
|
src->y1 = src_y;
|
|
src->y2 = src_y + src_h;
|
|
}
|
|
|
|
dst->x1 = crtc_x;
|
|
dst->x2 = crtc_x + crtc_w;
|
|
dst->y1 = crtc_y;
|
|
dst->y2 = crtc_y + crtc_h;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
intel_prepare_sprite_plane(struct drm_plane *plane,
|
|
struct intel_plane_state *state)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_crtc *crtc = state->crtc;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
struct drm_framebuffer *fb = state->fb;
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
|
|
struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
|
|
int ret;
|
|
|
|
if (old_obj != obj) {
|
|
mutex_lock(&dev->struct_mutex);
|
|
|
|
/* Note that this will apply the VT-d workaround for scanouts,
|
|
* which is more restrictive than required for sprites. (The
|
|
* primary plane requires 256KiB alignment with 64 PTE padding,
|
|
* the sprite planes only require 128KiB alignment and 32 PTE
|
|
* padding.
|
|
*/
|
|
ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
|
|
if (ret == 0)
|
|
i915_gem_track_fb(old_obj, obj,
|
|
INTEL_FRONTBUFFER_SPRITE(pipe));
|
|
mutex_unlock(&dev->struct_mutex);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
intel_commit_sprite_plane(struct drm_plane *plane,
|
|
struct intel_plane_state *state)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct drm_crtc *crtc = state->crtc;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
enum pipe pipe = intel_crtc->pipe;
|
|
struct drm_framebuffer *fb = state->fb;
|
|
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
|
|
struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
|
|
int crtc_x, crtc_y;
|
|
unsigned int crtc_w, crtc_h;
|
|
uint32_t src_x, src_y, src_w, src_h;
|
|
struct drm_rect *dst = &state->dst;
|
|
const struct drm_rect *clip = &state->clip;
|
|
bool primary_enabled;
|
|
|
|
/*
|
|
* If the sprite is completely covering the primary plane,
|
|
* we can disable the primary and save power.
|
|
*/
|
|
primary_enabled = !drm_rect_equals(dst, clip) || colorkey_enabled(intel_plane);
|
|
WARN_ON(!primary_enabled && !state->visible && intel_crtc->active);
|
|
|
|
intel_plane->crtc_x = state->orig_dst.x1;
|
|
intel_plane->crtc_y = state->orig_dst.y1;
|
|
intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
|
|
intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
|
|
intel_plane->src_x = state->orig_src.x1;
|
|
intel_plane->src_y = state->orig_src.y1;
|
|
intel_plane->src_w = drm_rect_width(&state->orig_src);
|
|
intel_plane->src_h = drm_rect_height(&state->orig_src);
|
|
intel_plane->obj = obj;
|
|
|
|
if (intel_crtc->active) {
|
|
bool primary_was_enabled = intel_crtc->primary_enabled;
|
|
|
|
intel_crtc->primary_enabled = primary_enabled;
|
|
|
|
if (primary_was_enabled != primary_enabled)
|
|
intel_crtc_wait_for_pending_flips(crtc);
|
|
|
|
if (primary_was_enabled && !primary_enabled)
|
|
intel_pre_disable_primary(crtc);
|
|
|
|
if (state->visible) {
|
|
crtc_x = state->dst.x1;
|
|
crtc_y = state->dst.y1;
|
|
crtc_w = drm_rect_width(&state->dst);
|
|
crtc_h = drm_rect_height(&state->dst);
|
|
src_x = state->src.x1;
|
|
src_y = state->src.y1;
|
|
src_w = drm_rect_width(&state->src);
|
|
src_h = drm_rect_height(&state->src);
|
|
intel_plane->update_plane(plane, crtc, fb, obj,
|
|
crtc_x, crtc_y, crtc_w, crtc_h,
|
|
src_x, src_y, src_w, src_h);
|
|
} else {
|
|
intel_plane->disable_plane(plane, crtc);
|
|
}
|
|
|
|
|
|
intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_SPRITE(pipe));
|
|
|
|
if (!primary_was_enabled && primary_enabled)
|
|
intel_post_enable_primary(crtc);
|
|
}
|
|
|
|
/* Unpin old obj after new one is active to avoid ugliness */
|
|
if (old_obj && old_obj != obj) {
|
|
|
|
/*
|
|
* It's fairly common to simply update the position of
|
|
* an existing object. In that case, we don't need to
|
|
* wait for vblank to avoid ugliness, we only need to
|
|
* do the pin & ref bookkeeping.
|
|
*/
|
|
if (intel_crtc->active)
|
|
intel_wait_for_vblank(dev, intel_crtc->pipe);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_unpin_fb_obj(old_obj);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
}
|
|
|
|
static int
|
|
intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb, int crtc_x, int crtc_y,
|
|
unsigned int crtc_w, unsigned int crtc_h,
|
|
uint32_t src_x, uint32_t src_y,
|
|
uint32_t src_w, uint32_t src_h)
|
|
{
|
|
struct intel_plane_state state;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
int ret;
|
|
|
|
state.crtc = crtc;
|
|
state.fb = fb;
|
|
|
|
/* sample coordinates in 16.16 fixed point */
|
|
state.src.x1 = src_x;
|
|
state.src.x2 = src_x + src_w;
|
|
state.src.y1 = src_y;
|
|
state.src.y2 = src_y + src_h;
|
|
|
|
/* integer pixels */
|
|
state.dst.x1 = crtc_x;
|
|
state.dst.x2 = crtc_x + crtc_w;
|
|
state.dst.y1 = crtc_y;
|
|
state.dst.y2 = crtc_y + crtc_h;
|
|
|
|
state.clip.x1 = 0;
|
|
state.clip.y1 = 0;
|
|
state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
|
|
state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
|
|
state.orig_src = state.src;
|
|
state.orig_dst = state.dst;
|
|
|
|
ret = intel_check_sprite_plane(plane, &state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = intel_prepare_sprite_plane(plane, &state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
intel_commit_sprite_plane(plane, &state);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
intel_disable_plane(struct drm_plane *plane)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
struct intel_crtc *intel_crtc;
|
|
enum pipe pipe;
|
|
|
|
if (!plane->fb)
|
|
return 0;
|
|
|
|
if (WARN_ON(!plane->crtc))
|
|
return -EINVAL;
|
|
|
|
intel_crtc = to_intel_crtc(plane->crtc);
|
|
pipe = intel_crtc->pipe;
|
|
|
|
if (intel_crtc->active) {
|
|
bool primary_was_enabled = intel_crtc->primary_enabled;
|
|
|
|
intel_crtc->primary_enabled = true;
|
|
|
|
intel_plane->disable_plane(plane, plane->crtc);
|
|
|
|
if (!primary_was_enabled && intel_crtc->primary_enabled)
|
|
intel_post_enable_primary(plane->crtc);
|
|
}
|
|
|
|
if (intel_plane->obj) {
|
|
if (intel_crtc->active)
|
|
intel_wait_for_vblank(dev, intel_plane->pipe);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
intel_unpin_fb_obj(intel_plane->obj);
|
|
i915_gem_track_fb(intel_plane->obj, NULL,
|
|
INTEL_FRONTBUFFER_SPRITE(pipe));
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
intel_plane->obj = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void intel_destroy_plane(struct drm_plane *plane)
|
|
{
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
intel_disable_plane(plane);
|
|
drm_plane_cleanup(plane);
|
|
kfree(intel_plane);
|
|
}
|
|
|
|
int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv)
|
|
{
|
|
struct drm_intel_sprite_colorkey *set = data;
|
|
struct drm_plane *plane;
|
|
struct intel_plane *intel_plane;
|
|
int ret = 0;
|
|
|
|
if (!drm_core_check_feature(dev, DRIVER_MODESET))
|
|
return -ENODEV;
|
|
|
|
/* Make sure we don't try to enable both src & dest simultaneously */
|
|
if ((set->flags & (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) == (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE))
|
|
return -EINVAL;
|
|
|
|
drm_modeset_lock_all(dev);
|
|
|
|
plane = drm_plane_find(dev, set->plane_id);
|
|
if (!plane) {
|
|
ret = -ENOENT;
|
|
goto out_unlock;
|
|
}
|
|
|
|
intel_plane = to_intel_plane(plane);
|
|
ret = intel_plane->update_colorkey(plane, set);
|
|
|
|
out_unlock:
|
|
drm_modeset_unlock_all(dev);
|
|
return ret;
|
|
}
|
|
|
|
int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv)
|
|
{
|
|
struct drm_intel_sprite_colorkey *get = data;
|
|
struct drm_plane *plane;
|
|
struct intel_plane *intel_plane;
|
|
int ret = 0;
|
|
|
|
if (!drm_core_check_feature(dev, DRIVER_MODESET))
|
|
return -ENODEV;
|
|
|
|
drm_modeset_lock_all(dev);
|
|
|
|
plane = drm_plane_find(dev, get->plane_id);
|
|
if (!plane) {
|
|
ret = -ENOENT;
|
|
goto out_unlock;
|
|
}
|
|
|
|
intel_plane = to_intel_plane(plane);
|
|
intel_plane->get_colorkey(plane, get);
|
|
|
|
out_unlock:
|
|
drm_modeset_unlock_all(dev);
|
|
return ret;
|
|
}
|
|
|
|
int intel_plane_set_property(struct drm_plane *plane,
|
|
struct drm_property *prop,
|
|
uint64_t val)
|
|
{
|
|
struct drm_device *dev = plane->dev;
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
uint64_t old_val;
|
|
int ret = -ENOENT;
|
|
|
|
if (prop == dev->mode_config.rotation_property) {
|
|
/* exactly one rotation angle please */
|
|
if (hweight32(val & 0xf) != 1)
|
|
return -EINVAL;
|
|
|
|
if (intel_plane->rotation == val)
|
|
return 0;
|
|
|
|
old_val = intel_plane->rotation;
|
|
intel_plane->rotation = val;
|
|
ret = intel_plane_restore(plane);
|
|
if (ret)
|
|
intel_plane->rotation = old_val;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int intel_plane_restore(struct drm_plane *plane)
|
|
{
|
|
struct intel_plane *intel_plane = to_intel_plane(plane);
|
|
|
|
if (!plane->crtc || !plane->fb)
|
|
return 0;
|
|
|
|
return plane->funcs->update_plane(plane, plane->crtc, plane->fb,
|
|
intel_plane->crtc_x, intel_plane->crtc_y,
|
|
intel_plane->crtc_w, intel_plane->crtc_h,
|
|
intel_plane->src_x, intel_plane->src_y,
|
|
intel_plane->src_w, intel_plane->src_h);
|
|
}
|
|
|
|
void intel_plane_disable(struct drm_plane *plane)
|
|
{
|
|
if (!plane->crtc || !plane->fb)
|
|
return;
|
|
|
|
intel_disable_plane(plane);
|
|
}
|
|
|
|
static const struct drm_plane_funcs intel_plane_funcs = {
|
|
.update_plane = intel_update_plane,
|
|
.disable_plane = intel_disable_plane,
|
|
.destroy = intel_destroy_plane,
|
|
.set_property = intel_plane_set_property,
|
|
};
|
|
|
|
static uint32_t ilk_plane_formats[] = {
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_YUYV,
|
|
DRM_FORMAT_YVYU,
|
|
DRM_FORMAT_UYVY,
|
|
DRM_FORMAT_VYUY,
|
|
};
|
|
|
|
static uint32_t snb_plane_formats[] = {
|
|
DRM_FORMAT_XBGR8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_YUYV,
|
|
DRM_FORMAT_YVYU,
|
|
DRM_FORMAT_UYVY,
|
|
DRM_FORMAT_VYUY,
|
|
};
|
|
|
|
static uint32_t vlv_plane_formats[] = {
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
DRM_FORMAT_XBGR8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_XBGR2101010,
|
|
DRM_FORMAT_ABGR2101010,
|
|
DRM_FORMAT_YUYV,
|
|
DRM_FORMAT_YVYU,
|
|
DRM_FORMAT_UYVY,
|
|
DRM_FORMAT_VYUY,
|
|
};
|
|
|
|
static uint32_t skl_plane_formats[] = {
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
DRM_FORMAT_XBGR8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_YUYV,
|
|
DRM_FORMAT_YVYU,
|
|
DRM_FORMAT_UYVY,
|
|
DRM_FORMAT_VYUY,
|
|
};
|
|
|
|
int
|
|
intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
|
|
{
|
|
struct intel_plane *intel_plane;
|
|
unsigned long possible_crtcs;
|
|
const uint32_t *plane_formats;
|
|
int num_plane_formats;
|
|
int ret;
|
|
|
|
if (INTEL_INFO(dev)->gen < 5)
|
|
return -ENODEV;
|
|
|
|
intel_plane = kzalloc(sizeof(*intel_plane), GFP_KERNEL);
|
|
if (!intel_plane)
|
|
return -ENOMEM;
|
|
|
|
switch (INTEL_INFO(dev)->gen) {
|
|
case 5:
|
|
case 6:
|
|
intel_plane->can_scale = true;
|
|
intel_plane->max_downscale = 16;
|
|
intel_plane->update_plane = ilk_update_plane;
|
|
intel_plane->disable_plane = ilk_disable_plane;
|
|
intel_plane->update_colorkey = ilk_update_colorkey;
|
|
intel_plane->get_colorkey = ilk_get_colorkey;
|
|
|
|
if (IS_GEN6(dev)) {
|
|
plane_formats = snb_plane_formats;
|
|
num_plane_formats = ARRAY_SIZE(snb_plane_formats);
|
|
} else {
|
|
plane_formats = ilk_plane_formats;
|
|
num_plane_formats = ARRAY_SIZE(ilk_plane_formats);
|
|
}
|
|
break;
|
|
|
|
case 7:
|
|
case 8:
|
|
if (IS_IVYBRIDGE(dev)) {
|
|
intel_plane->can_scale = true;
|
|
intel_plane->max_downscale = 2;
|
|
} else {
|
|
intel_plane->can_scale = false;
|
|
intel_plane->max_downscale = 1;
|
|
}
|
|
|
|
if (IS_VALLEYVIEW(dev)) {
|
|
intel_plane->update_plane = vlv_update_plane;
|
|
intel_plane->disable_plane = vlv_disable_plane;
|
|
intel_plane->update_colorkey = vlv_update_colorkey;
|
|
intel_plane->get_colorkey = vlv_get_colorkey;
|
|
|
|
plane_formats = vlv_plane_formats;
|
|
num_plane_formats = ARRAY_SIZE(vlv_plane_formats);
|
|
} else {
|
|
intel_plane->update_plane = ivb_update_plane;
|
|
intel_plane->disable_plane = ivb_disable_plane;
|
|
intel_plane->update_colorkey = ivb_update_colorkey;
|
|
intel_plane->get_colorkey = ivb_get_colorkey;
|
|
|
|
plane_formats = snb_plane_formats;
|
|
num_plane_formats = ARRAY_SIZE(snb_plane_formats);
|
|
}
|
|
break;
|
|
case 9:
|
|
/*
|
|
* FIXME: Skylake planes can be scaled (with some restrictions),
|
|
* but this is for another time.
|
|
*/
|
|
intel_plane->can_scale = false;
|
|
intel_plane->max_downscale = 1;
|
|
intel_plane->update_plane = skl_update_plane;
|
|
intel_plane->disable_plane = skl_disable_plane;
|
|
intel_plane->update_colorkey = skl_update_colorkey;
|
|
intel_plane->get_colorkey = skl_get_colorkey;
|
|
|
|
plane_formats = skl_plane_formats;
|
|
num_plane_formats = ARRAY_SIZE(skl_plane_formats);
|
|
break;
|
|
default:
|
|
kfree(intel_plane);
|
|
return -ENODEV;
|
|
}
|
|
|
|
intel_plane->pipe = pipe;
|
|
intel_plane->plane = plane;
|
|
intel_plane->rotation = BIT(DRM_ROTATE_0);
|
|
possible_crtcs = (1 << pipe);
|
|
ret = drm_universal_plane_init(dev, &intel_plane->base, possible_crtcs,
|
|
&intel_plane_funcs,
|
|
plane_formats, num_plane_formats,
|
|
DRM_PLANE_TYPE_OVERLAY);
|
|
if (ret) {
|
|
kfree(intel_plane);
|
|
goto out;
|
|
}
|
|
|
|
if (!dev->mode_config.rotation_property)
|
|
dev->mode_config.rotation_property =
|
|
drm_mode_create_rotation_property(dev,
|
|
BIT(DRM_ROTATE_0) |
|
|
BIT(DRM_ROTATE_180));
|
|
|
|
if (dev->mode_config.rotation_property)
|
|
drm_object_attach_property(&intel_plane->base.base,
|
|
dev->mode_config.rotation_property,
|
|
intel_plane->rotation);
|
|
|
|
out:
|
|
return ret;
|
|
}
|