forked from Minki/linux
d45bc58dd3
The code to initialize a struct nand_hw_control is duplicated across several drivers. Factorize it using an inline function. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
417 lines
10 KiB
C
417 lines
10 KiB
C
/*
|
|
* JZ4780 NAND driver
|
|
*
|
|
* Copyright (c) 2015 Imagination Technologies
|
|
* Author: Alex Smith <alex.smith@imgtec.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <linux/jz4780-nemc.h>
|
|
|
|
#include "jz4780_bch.h"
|
|
|
|
#define DRV_NAME "jz4780-nand"
|
|
|
|
#define OFFSET_DATA 0x00000000
|
|
#define OFFSET_CMD 0x00400000
|
|
#define OFFSET_ADDR 0x00800000
|
|
|
|
/* Command delay when there is no R/B pin. */
|
|
#define RB_DELAY_US 100
|
|
|
|
struct jz4780_nand_cs {
|
|
unsigned int bank;
|
|
void __iomem *base;
|
|
};
|
|
|
|
struct jz4780_nand_controller {
|
|
struct device *dev;
|
|
struct jz4780_bch *bch;
|
|
struct nand_hw_control controller;
|
|
unsigned int num_banks;
|
|
struct list_head chips;
|
|
int selected;
|
|
struct jz4780_nand_cs cs[];
|
|
};
|
|
|
|
struct jz4780_nand_chip {
|
|
struct nand_chip chip;
|
|
struct list_head chip_list;
|
|
|
|
struct gpio_desc *busy_gpio;
|
|
struct gpio_desc *wp_gpio;
|
|
unsigned int reading: 1;
|
|
};
|
|
|
|
static inline struct jz4780_nand_chip *to_jz4780_nand_chip(struct mtd_info *mtd)
|
|
{
|
|
return container_of(mtd_to_nand(mtd), struct jz4780_nand_chip, chip);
|
|
}
|
|
|
|
static inline struct jz4780_nand_controller *to_jz4780_nand_controller(struct nand_hw_control *ctrl)
|
|
{
|
|
return container_of(ctrl, struct jz4780_nand_controller, controller);
|
|
}
|
|
|
|
static void jz4780_nand_select_chip(struct mtd_info *mtd, int chipnr)
|
|
{
|
|
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
|
|
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
|
|
struct jz4780_nand_cs *cs;
|
|
|
|
/* Ensure the currently selected chip is deasserted. */
|
|
if (chipnr == -1 && nfc->selected >= 0) {
|
|
cs = &nfc->cs[nfc->selected];
|
|
jz4780_nemc_assert(nfc->dev, cs->bank, false);
|
|
}
|
|
|
|
nfc->selected = chipnr;
|
|
}
|
|
|
|
static void jz4780_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl)
|
|
{
|
|
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
|
|
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
|
|
struct jz4780_nand_cs *cs;
|
|
|
|
if (WARN_ON(nfc->selected < 0))
|
|
return;
|
|
|
|
cs = &nfc->cs[nfc->selected];
|
|
|
|
jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
if (ctrl & NAND_ALE)
|
|
writeb(cmd, cs->base + OFFSET_ADDR);
|
|
else if (ctrl & NAND_CLE)
|
|
writeb(cmd, cs->base + OFFSET_CMD);
|
|
}
|
|
|
|
static int jz4780_nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
|
|
|
|
return !gpiod_get_value_cansleep(nand->busy_gpio);
|
|
}
|
|
|
|
static void jz4780_nand_ecc_hwctl(struct mtd_info *mtd, int mode)
|
|
{
|
|
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
|
|
|
|
nand->reading = (mode == NAND_ECC_READ);
|
|
}
|
|
|
|
static int jz4780_nand_ecc_calculate(struct mtd_info *mtd, const u8 *dat,
|
|
u8 *ecc_code)
|
|
{
|
|
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
|
|
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
|
|
struct jz4780_bch_params params;
|
|
|
|
/*
|
|
* Don't need to generate the ECC when reading, BCH does it for us as
|
|
* part of decoding/correction.
|
|
*/
|
|
if (nand->reading)
|
|
return 0;
|
|
|
|
params.size = nand->chip.ecc.size;
|
|
params.bytes = nand->chip.ecc.bytes;
|
|
params.strength = nand->chip.ecc.strength;
|
|
|
|
return jz4780_bch_calculate(nfc->bch, ¶ms, dat, ecc_code);
|
|
}
|
|
|
|
static int jz4780_nand_ecc_correct(struct mtd_info *mtd, u8 *dat,
|
|
u8 *read_ecc, u8 *calc_ecc)
|
|
{
|
|
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
|
|
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
|
|
struct jz4780_bch_params params;
|
|
|
|
params.size = nand->chip.ecc.size;
|
|
params.bytes = nand->chip.ecc.bytes;
|
|
params.strength = nand->chip.ecc.strength;
|
|
|
|
return jz4780_bch_correct(nfc->bch, ¶ms, dat, read_ecc);
|
|
}
|
|
|
|
static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *dev)
|
|
{
|
|
struct nand_chip *chip = &nand->chip;
|
|
struct mtd_info *mtd = nand_to_mtd(chip);
|
|
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
|
|
int eccbytes;
|
|
|
|
chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
|
|
(chip->ecc.strength / 8);
|
|
|
|
switch (chip->ecc.mode) {
|
|
case NAND_ECC_HW:
|
|
if (!nfc->bch) {
|
|
dev_err(dev, "HW BCH selected, but BCH controller not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
chip->ecc.hwctl = jz4780_nand_ecc_hwctl;
|
|
chip->ecc.calculate = jz4780_nand_ecc_calculate;
|
|
chip->ecc.correct = jz4780_nand_ecc_correct;
|
|
/* fall through */
|
|
case NAND_ECC_SOFT:
|
|
dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
|
|
(nfc->bch) ? "hardware BCH" : "software ECC",
|
|
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
|
|
break;
|
|
case NAND_ECC_NONE:
|
|
dev_info(dev, "not using ECC\n");
|
|
break;
|
|
default:
|
|
dev_err(dev, "ECC mode %d not supported\n", chip->ecc.mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The NAND core will generate the ECC layout for SW ECC */
|
|
if (chip->ecc.mode != NAND_ECC_HW)
|
|
return 0;
|
|
|
|
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
|
|
eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
|
|
|
|
if (eccbytes > mtd->oobsize - 2) {
|
|
dev_err(dev,
|
|
"invalid ECC config: required %d ECC bytes, but only %d are available",
|
|
eccbytes, mtd->oobsize - 2);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mtd->ooblayout = &nand_ooblayout_lp_ops;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jz4780_nand_init_chip(struct platform_device *pdev,
|
|
struct jz4780_nand_controller *nfc,
|
|
struct device_node *np,
|
|
unsigned int chipnr)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct jz4780_nand_chip *nand;
|
|
struct jz4780_nand_cs *cs;
|
|
struct resource *res;
|
|
struct nand_chip *chip;
|
|
struct mtd_info *mtd;
|
|
const __be32 *reg;
|
|
int ret = 0;
|
|
|
|
cs = &nfc->cs[chipnr];
|
|
|
|
reg = of_get_property(np, "reg", NULL);
|
|
if (!reg)
|
|
return -EINVAL;
|
|
|
|
cs->bank = be32_to_cpu(*reg);
|
|
|
|
jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
|
|
cs->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(cs->base))
|
|
return PTR_ERR(cs->base);
|
|
|
|
nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
|
|
if (!nand)
|
|
return -ENOMEM;
|
|
|
|
nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
|
|
|
|
if (IS_ERR(nand->busy_gpio)) {
|
|
ret = PTR_ERR(nand->busy_gpio);
|
|
dev_err(dev, "failed to request busy GPIO: %d\n", ret);
|
|
return ret;
|
|
} else if (nand->busy_gpio) {
|
|
nand->chip.dev_ready = jz4780_nand_dev_ready;
|
|
}
|
|
|
|
nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
|
|
|
|
if (IS_ERR(nand->wp_gpio)) {
|
|
ret = PTR_ERR(nand->wp_gpio);
|
|
dev_err(dev, "failed to request WP GPIO: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
chip = &nand->chip;
|
|
mtd = nand_to_mtd(chip);
|
|
mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
|
|
cs->bank);
|
|
if (!mtd->name)
|
|
return -ENOMEM;
|
|
mtd->dev.parent = dev;
|
|
|
|
chip->IO_ADDR_R = cs->base + OFFSET_DATA;
|
|
chip->IO_ADDR_W = cs->base + OFFSET_DATA;
|
|
chip->chip_delay = RB_DELAY_US;
|
|
chip->options = NAND_NO_SUBPAGE_WRITE;
|
|
chip->select_chip = jz4780_nand_select_chip;
|
|
chip->cmd_ctrl = jz4780_nand_cmd_ctrl;
|
|
chip->ecc.mode = NAND_ECC_HW;
|
|
chip->controller = &nfc->controller;
|
|
nand_set_flash_node(chip, np);
|
|
|
|
ret = nand_scan_ident(mtd, 1, NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = jz4780_nand_init_ecc(nand, dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = nand_scan_tail(mtd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mtd_device_register(mtd, NULL, 0);
|
|
if (ret) {
|
|
nand_release(mtd);
|
|
return ret;
|
|
}
|
|
|
|
list_add_tail(&nand->chip_list, &nfc->chips);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc)
|
|
{
|
|
struct jz4780_nand_chip *chip;
|
|
|
|
while (!list_empty(&nfc->chips)) {
|
|
chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list);
|
|
nand_release(nand_to_mtd(&chip->chip));
|
|
list_del(&chip->chip_list);
|
|
}
|
|
}
|
|
|
|
static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np;
|
|
int i = 0;
|
|
int ret;
|
|
int num_chips = of_get_child_count(dev->of_node);
|
|
|
|
if (num_chips > nfc->num_banks) {
|
|
dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for_each_child_of_node(dev->of_node, np) {
|
|
ret = jz4780_nand_init_chip(pdev, nfc, np, i);
|
|
if (ret) {
|
|
jz4780_nand_cleanup_chips(nfc);
|
|
return ret;
|
|
}
|
|
|
|
i++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jz4780_nand_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
unsigned int num_banks;
|
|
struct jz4780_nand_controller *nfc;
|
|
int ret;
|
|
|
|
num_banks = jz4780_nemc_num_banks(dev);
|
|
if (num_banks == 0) {
|
|
dev_err(dev, "no banks found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
nfc = devm_kzalloc(dev, sizeof(*nfc) + (sizeof(nfc->cs[0]) * num_banks), GFP_KERNEL);
|
|
if (!nfc)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Check for BCH HW before we call nand_scan_ident, to prevent us from
|
|
* having to call it again if the BCH driver returns -EPROBE_DEFER.
|
|
*/
|
|
nfc->bch = of_jz4780_bch_get(dev->of_node);
|
|
if (IS_ERR(nfc->bch))
|
|
return PTR_ERR(nfc->bch);
|
|
|
|
nfc->dev = dev;
|
|
nfc->num_banks = num_banks;
|
|
|
|
nand_hw_control_init(&nfc->controller);
|
|
INIT_LIST_HEAD(&nfc->chips);
|
|
|
|
ret = jz4780_nand_init_chips(nfc, pdev);
|
|
if (ret) {
|
|
if (nfc->bch)
|
|
jz4780_bch_release(nfc->bch);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, nfc);
|
|
return 0;
|
|
}
|
|
|
|
static int jz4780_nand_remove(struct platform_device *pdev)
|
|
{
|
|
struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev);
|
|
|
|
if (nfc->bch)
|
|
jz4780_bch_release(nfc->bch);
|
|
|
|
jz4780_nand_cleanup_chips(nfc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id jz4780_nand_dt_match[] = {
|
|
{ .compatible = "ingenic,jz4780-nand" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
|
|
|
|
static struct platform_driver jz4780_nand_driver = {
|
|
.probe = jz4780_nand_probe,
|
|
.remove = jz4780_nand_remove,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = of_match_ptr(jz4780_nand_dt_match),
|
|
},
|
|
};
|
|
module_platform_driver(jz4780_nand_driver);
|
|
|
|
MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
|
|
MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
|
|
MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
|
|
MODULE_LICENSE("GPL v2");
|