linux/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
Jacob Keller b4f47a4830 ixgbe: use BIT() macro
Several areas of ixgbe were written before widespread usage of the
BIT(n) macro. With the impending release of GCC 6 and its associated new
warnings, some usages such as (1 << 31) have been noted within the ixgbe
driver source. Fix these wholesale and prevent future issues by simply
using BIT macro instead of hand coded bit shifts.

Also fix a few shifts that are shifting values into place by using the
'u' prefix to indicate unsigned. It doesn't strictly matter in these
cases because we're not shifting by too large a value, but these are all
unsigned values and should be indicated as such.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25 04:15:11 -07:00

289 lines
8.0 KiB
C

/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
Copyright(c) 1999 - 2013 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
#include "ixgbe.h"
#include "ixgbe_type.h"
#include "ixgbe_dcb.h"
#include "ixgbe_dcb_82598.h"
/**
* ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
*
* Configure Rx Data Arbiter and credits for each traffic class.
*/
s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
u16 *refill,
u16 *max,
u8 *prio_type)
{
u32 reg = 0;
u32 credit_refill = 0;
u32 credit_max = 0;
u8 i = 0;
reg = IXGBE_READ_REG(hw, IXGBE_RUPPBMR) | IXGBE_RUPPBMR_MQA;
IXGBE_WRITE_REG(hw, IXGBE_RUPPBMR, reg);
reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
/* Enable Arbiter */
reg &= ~IXGBE_RMCS_ARBDIS;
/* Enable Receive Recycle within the BWG */
reg |= IXGBE_RMCS_RRM;
/* Enable Deficit Fixed Priority arbitration*/
reg |= IXGBE_RMCS_DFP;
IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
/* Configure traffic class credits and priority */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
credit_refill = refill[i];
credit_max = max[i];
reg = credit_refill | (credit_max << IXGBE_RT2CR_MCL_SHIFT);
if (prio_type[i] == prio_link)
reg |= IXGBE_RT2CR_LSP;
IXGBE_WRITE_REG(hw, IXGBE_RT2CR(i), reg);
}
reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
reg |= IXGBE_RDRXCTL_RDMTS_1_2;
reg |= IXGBE_RDRXCTL_MPBEN;
reg |= IXGBE_RDRXCTL_MCEN;
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
reg = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
/* Make sure there is enough descriptors before arbitration */
reg &= ~IXGBE_RXCTRL_DMBYPS;
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg);
return 0;
}
/**
* ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
*
* Configure Tx Descriptor Arbiter and credits for each traffic class.
*/
s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
u16 *refill,
u16 *max,
u8 *bwg_id,
u8 *prio_type)
{
u32 reg, max_credits;
u8 i;
reg = IXGBE_READ_REG(hw, IXGBE_DPMCS);
/* Enable arbiter */
reg &= ~IXGBE_DPMCS_ARBDIS;
reg |= IXGBE_DPMCS_TSOEF;
/* Configure Max TSO packet size 34KB including payload and headers */
reg |= (0x4 << IXGBE_DPMCS_MTSOS_SHIFT);
IXGBE_WRITE_REG(hw, IXGBE_DPMCS, reg);
/* Configure traffic class credits and priority */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
max_credits = max[i];
reg = max_credits << IXGBE_TDTQ2TCCR_MCL_SHIFT;
reg |= refill[i];
reg |= (u32)(bwg_id[i]) << IXGBE_TDTQ2TCCR_BWG_SHIFT;
if (prio_type[i] == prio_group)
reg |= IXGBE_TDTQ2TCCR_GSP;
if (prio_type[i] == prio_link)
reg |= IXGBE_TDTQ2TCCR_LSP;
IXGBE_WRITE_REG(hw, IXGBE_TDTQ2TCCR(i), reg);
}
return 0;
}
/**
* ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
*
* Configure Tx Data Arbiter and credits for each traffic class.
*/
s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
u16 *refill,
u16 *max,
u8 *bwg_id,
u8 *prio_type)
{
u32 reg;
u8 i;
reg = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
/* Enable Data Plane Arbiter */
reg &= ~IXGBE_PDPMCS_ARBDIS;
/* Enable DFP and Transmit Recycle Mode */
reg |= (IXGBE_PDPMCS_TPPAC | IXGBE_PDPMCS_TRM);
IXGBE_WRITE_REG(hw, IXGBE_PDPMCS, reg);
/* Configure traffic class credits and priority */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
reg = refill[i];
reg |= (u32)(max[i]) << IXGBE_TDPT2TCCR_MCL_SHIFT;
reg |= (u32)(bwg_id[i]) << IXGBE_TDPT2TCCR_BWG_SHIFT;
if (prio_type[i] == prio_group)
reg |= IXGBE_TDPT2TCCR_GSP;
if (prio_type[i] == prio_link)
reg |= IXGBE_TDPT2TCCR_LSP;
IXGBE_WRITE_REG(hw, IXGBE_TDPT2TCCR(i), reg);
}
/* Enable Tx packet buffer division */
reg = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
reg |= IXGBE_DTXCTL_ENDBUBD;
IXGBE_WRITE_REG(hw, IXGBE_DTXCTL, reg);
return 0;
}
/**
* ixgbe_dcb_config_pfc_82598 - Config priority flow control
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
*
* Configure Priority Flow Control for each traffic class.
*/
s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
{
u32 fcrtl, reg;
u8 i;
/* Enable Transmit Priority Flow Control */
reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
reg &= ~IXGBE_RMCS_TFCE_802_3X;
reg |= IXGBE_RMCS_TFCE_PRIORITY;
IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
/* Enable Receive Priority Flow Control */
reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
reg &= ~(IXGBE_FCTRL_RPFCE | IXGBE_FCTRL_RFCE);
if (pfc_en)
reg |= IXGBE_FCTRL_RPFCE;
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg);
/* Configure PFC Tx thresholds per TC */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
if (!(pfc_en & BIT(i))) {
IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
continue;
}
fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
reg = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg);
}
/* Configure pause time */
reg = hw->fc.pause_time * 0x00010001;
for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
/* Configure flow control refresh threshold value */
IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
return 0;
}
/**
* ixgbe_dcb_config_tc_stats_82598 - Configure traffic class statistics
* @hw: pointer to hardware structure
*
* Configure queue statistics registers, all queues belonging to same traffic
* class uses a single set of queue statistics counters.
*/
static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
{
u32 reg = 0;
u8 i = 0;
u8 j = 0;
/* Receive Queues stats setting - 8 queues per statistics reg */
for (i = 0, j = 0; i < 15 && j < 8; i = i + 2, j++) {
reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i));
reg |= ((0x1010101) * j);
IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i + 1));
reg |= ((0x1010101) * j);
IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i + 1), reg);
}
/* Transmit Queues stats setting - 4 queues per statistics reg */
for (i = 0; i < 8; i++) {
reg = IXGBE_READ_REG(hw, IXGBE_TQSMR(i));
reg |= ((0x1010101) * i);
IXGBE_WRITE_REG(hw, IXGBE_TQSMR(i), reg);
}
return 0;
}
/**
* ixgbe_dcb_hw_config_82598 - Config and enable DCB
* @hw: pointer to hardware structure
* @dcb_config: pointer to ixgbe_dcb_config structure
*
* Configure dcb settings and enable dcb mode.
*/
s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
u16 *max, u8 *bwg_id, u8 *prio_type)
{
ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, prio_type);
ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
bwg_id, prio_type);
ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
bwg_id, prio_type);
ixgbe_dcb_config_pfc_82598(hw, pfc_en);
ixgbe_dcb_config_tc_stats_82598(hw);
return 0;
}