forked from Minki/linux
566603e5e6
Add the nodes for the dwc2 USB controller and the related USB PHYs. Currently we force usb0 to host mode because OTG is currently not working in our PHY driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
670 lines
15 KiB
Plaintext
670 lines
15 KiB
Plaintext
/*
|
|
* Copyright (c) 2016 Andreas Färber
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
|
|
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
|
|
#include <dt-bindings/clock/gxbb-clkc.h>
|
|
#include <dt-bindings/clock/gxbb-aoclkc.h>
|
|
#include <dt-bindings/reset/gxbb-aoclkc.h>
|
|
|
|
/ {
|
|
compatible = "amlogic,meson-gxbb";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
cpus {
|
|
#address-cells = <0x2>;
|
|
#size-cells = <0x0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
reg = <0x0 0x1>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
reg = <0x0 0x2>;
|
|
enable-method = "psci";
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
reg = <0x0 0x3>;
|
|
enable-method = "psci";
|
|
};
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a53-pmu";
|
|
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
firmware {
|
|
sm: secure-monitor {
|
|
compatible = "amlogic,meson-gxbb-sm";
|
|
};
|
|
};
|
|
|
|
efuse: efuse {
|
|
compatible = "amlogic,meson-gxbb-efuse";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
sn: sn@14 {
|
|
reg = <0x14 0x10>;
|
|
};
|
|
|
|
eth_mac: eth_mac@34 {
|
|
reg = <0x34 0x10>;
|
|
};
|
|
|
|
bid: bid@46 {
|
|
reg = <0x46 0x30>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13
|
|
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
|
|
<GIC_PPI 14
|
|
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
|
|
<GIC_PPI 11
|
|
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
|
|
<GIC_PPI 10
|
|
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
|
|
};
|
|
|
|
xtal: xtal-clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "xtal";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
usb0_phy: phy@c0000000 {
|
|
compatible = "amlogic,meson-gxbb-usb2-phy";
|
|
#phy-cells = <0>;
|
|
reg = <0x0 0xc0000000 0x0 0x20>;
|
|
resets = <&reset RESET_USB_OTG>;
|
|
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
|
|
clock-names = "usb_general", "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1_phy: phy@c0000020 {
|
|
compatible = "amlogic,meson-gxbb-usb2-phy";
|
|
#phy-cells = <0>;
|
|
reg = <0x0 0xc0000020 0x0 0x20>;
|
|
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
|
|
clock-names = "usb_general", "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
cbus: cbus@c1100000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xc1100000 0x0 0x100000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
|
|
|
|
reset: reset-controller@4404 {
|
|
compatible = "amlogic,meson-gxbb-reset";
|
|
reg = <0x0 0x04404 0x0 0x20>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
uart_A: serial@84c0 {
|
|
compatible = "amlogic,meson-uart";
|
|
reg = <0x0 0x84c0 0x0 0x14>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&xtal>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart_B: serial@84dc {
|
|
compatible = "amlogic,meson-uart";
|
|
reg = <0x0 0x84dc 0x0 0x14>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&xtal>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm_ab: pwm@8550 {
|
|
compatible = "amlogic,meson-gxbb-pwm";
|
|
reg = <0x0 0x08550 0x0 0x10>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm_cd: pwm@8650 {
|
|
compatible = "amlogic,meson-gxbb-pwm";
|
|
reg = <0x0 0x08650 0x0 0x10>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm_ef: pwm@86c0 {
|
|
compatible = "amlogic,meson-gxbb-pwm";
|
|
reg = <0x0 0x086c0 0x0 0x10>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart_C: serial@8700 {
|
|
compatible = "amlogic,meson-uart";
|
|
reg = <0x0 0x8700 0x0 0x14>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&xtal>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog@98d0 {
|
|
compatible = "amlogic,meson-gxbb-wdt";
|
|
reg = <0x0 0x098d0 0x0 0x10>;
|
|
clocks = <&xtal>;
|
|
};
|
|
|
|
spifc: spi@8c80 {
|
|
compatible = "amlogic,meson-gxbb-spifc";
|
|
reg = <0x0 0x08c80 0x0 0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clkc CLKID_SPI>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_A: i2c@8500 {
|
|
compatible = "amlogic,meson-gxbb-i2c";
|
|
reg = <0x0 0x08500 0x0 0x20>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clkc CLKID_I2C>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_B: i2c@87c0 {
|
|
compatible = "amlogic,meson-gxbb-i2c";
|
|
reg = <0x0 0x087c0 0x0 0x20>;
|
|
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clkc CLKID_I2C>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_C: i2c@87e0 {
|
|
compatible = "amlogic,meson-gxbb-i2c";
|
|
reg = <0x0 0x087e0 0x0 0x20>;
|
|
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clkc CLKID_I2C>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@c4301000 {
|
|
compatible = "arm,gic-400";
|
|
reg = <0x0 0xc4301000 0 0x1000>,
|
|
<0x0 0xc4302000 0 0x2000>,
|
|
<0x0 0xc4304000 0 0x2000>,
|
|
<0x0 0xc4306000 0 0x2000>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9
|
|
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
};
|
|
|
|
aobus: aobus@c8100000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xc8100000 0x0 0x100000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
|
|
|
|
pinctrl_aobus: pinctrl@14 {
|
|
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
gpio_ao: bank@14 {
|
|
reg = <0x0 0x00014 0x0 0x8>,
|
|
<0x0 0x0002c 0x0 0x4>,
|
|
<0x0 0x00024 0x0 0x8>;
|
|
reg-names = "mux", "pull", "gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
uart_ao_a_pins: uart_ao_a {
|
|
mux {
|
|
groups = "uart_tx_ao_a", "uart_rx_ao_a";
|
|
function = "uart_ao";
|
|
};
|
|
};
|
|
|
|
remote_input_ao_pins: remote_input_ao {
|
|
mux {
|
|
groups = "remote_input_ao";
|
|
function = "remote_input_ao";
|
|
};
|
|
};
|
|
|
|
i2c_ao_pins: i2c_ao {
|
|
mux {
|
|
groups = "i2c_sck_ao",
|
|
"i2c_sda_ao";
|
|
function = "i2c_ao";
|
|
};
|
|
};
|
|
|
|
pwm_ao_a_3_pins: pwm_ao_a_3 {
|
|
mux {
|
|
groups = "pwm_ao_a_3";
|
|
function = "pwm_ao_a_3";
|
|
};
|
|
};
|
|
|
|
pwm_ao_a_6_pins: pwm_ao_a_6 {
|
|
mux {
|
|
groups = "pwm_ao_a_6";
|
|
function = "pwm_ao_a_6";
|
|
};
|
|
};
|
|
|
|
pwm_ao_a_12_pins: pwm_ao_a_12 {
|
|
mux {
|
|
groups = "pwm_ao_a_12";
|
|
function = "pwm_ao_a_12";
|
|
};
|
|
};
|
|
|
|
pwm_ao_b_pins: pwm_ao_b {
|
|
mux {
|
|
groups = "pwm_ao_b";
|
|
function = "pwm_ao_b";
|
|
};
|
|
};
|
|
};
|
|
|
|
clkc_AO: clock-controller@040 {
|
|
compatible = "amlogic,gxbb-aoclkc";
|
|
reg = <0x0 0x00040 0x0 0x4>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
uart_AO: serial@4c0 {
|
|
compatible = "amlogic,meson-uart";
|
|
reg = <0x0 0x004c0 0x0 0x14>;
|
|
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&xtal>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ir: ir@580 {
|
|
compatible = "amlogic,meson-gxbb-ir";
|
|
reg = <0x0 0x00580 0x0 0x40>;
|
|
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm_ab_AO: pwm@550 {
|
|
compatible = "amlogic,meson-gxbb-pwm";
|
|
reg = <0x0 0x0550 0x0 0x10>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_AO: i2c@500 {
|
|
compatible = "amlogic,meson-gxbb-i2c";
|
|
reg = <0x0 0x500 0x0 0x20>;
|
|
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clkc CLKID_AO_I2C>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
periphs: periphs@c8834000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xc8834000 0x0 0x2000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
|
|
|
|
rng {
|
|
compatible = "amlogic,meson-rng";
|
|
reg = <0x0 0x0 0x0 0x4>;
|
|
};
|
|
|
|
pinctrl_periphs: pinctrl@4b0 {
|
|
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
gpio: bank@4b0 {
|
|
reg = <0x0 0x004b0 0x0 0x28>,
|
|
<0x0 0x004e8 0x0 0x14>,
|
|
<0x0 0x00120 0x0 0x14>,
|
|
<0x0 0x00430 0x0 0x40>;
|
|
reg-names = "mux", "pull", "pull-enable", "gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
emmc_pins: emmc {
|
|
mux {
|
|
groups = "emmc_nand_d07",
|
|
"emmc_cmd",
|
|
"emmc_clk";
|
|
function = "emmc";
|
|
};
|
|
};
|
|
|
|
nor_pins: nor {
|
|
mux {
|
|
groups = "nor_d",
|
|
"nor_q",
|
|
"nor_c",
|
|
"nor_cs";
|
|
function = "nor";
|
|
};
|
|
};
|
|
|
|
sdcard_pins: sdcard {
|
|
mux {
|
|
groups = "sdcard_d0",
|
|
"sdcard_d1",
|
|
"sdcard_d2",
|
|
"sdcard_d3",
|
|
"sdcard_cmd",
|
|
"sdcard_clk";
|
|
function = "sdcard";
|
|
};
|
|
};
|
|
|
|
sdio_pins: sdio {
|
|
mux {
|
|
groups = "sdio_d0",
|
|
"sdio_d1",
|
|
"sdio_d2",
|
|
"sdio_d3",
|
|
"sdio_cmd",
|
|
"sdio_clk";
|
|
function = "sdio";
|
|
};
|
|
};
|
|
|
|
sdio_irq_pins: sdio_irq {
|
|
mux {
|
|
groups = "sdio_irq";
|
|
function = "sdio";
|
|
};
|
|
};
|
|
|
|
uart_a_pins: uart_a {
|
|
mux {
|
|
groups = "uart_tx_a",
|
|
"uart_rx_a";
|
|
function = "uart_a";
|
|
};
|
|
};
|
|
|
|
uart_b_pins: uart_b {
|
|
mux {
|
|
groups = "uart_tx_b",
|
|
"uart_rx_b";
|
|
function = "uart_b";
|
|
};
|
|
};
|
|
|
|
uart_c_pins: uart_c {
|
|
mux {
|
|
groups = "uart_tx_c",
|
|
"uart_rx_c";
|
|
function = "uart_c";
|
|
};
|
|
};
|
|
|
|
i2c_a_pins: i2c_a {
|
|
mux {
|
|
groups = "i2c_sck_a",
|
|
"i2c_sda_a";
|
|
function = "i2c_a";
|
|
};
|
|
};
|
|
|
|
i2c_b_pins: i2c_b {
|
|
mux {
|
|
groups = "i2c_sck_b",
|
|
"i2c_sda_b";
|
|
function = "i2c_b";
|
|
};
|
|
};
|
|
|
|
i2c_c_pins: i2c_c {
|
|
mux {
|
|
groups = "i2c_sck_c",
|
|
"i2c_sda_c";
|
|
function = "i2c_c";
|
|
};
|
|
};
|
|
|
|
eth_pins: eth_c {
|
|
mux {
|
|
groups = "eth_mdio",
|
|
"eth_mdc",
|
|
"eth_clk_rx_clk",
|
|
"eth_rx_dv",
|
|
"eth_rxd0",
|
|
"eth_rxd1",
|
|
"eth_rxd2",
|
|
"eth_rxd3",
|
|
"eth_rgmii_tx_clk",
|
|
"eth_tx_en",
|
|
"eth_txd0",
|
|
"eth_txd1",
|
|
"eth_txd2",
|
|
"eth_txd3";
|
|
function = "eth";
|
|
};
|
|
};
|
|
|
|
pwm_a_x_pins: pwm_a_x {
|
|
mux {
|
|
groups = "pwm_a_x";
|
|
function = "pwm_a_x";
|
|
};
|
|
};
|
|
|
|
pwm_a_y_pins: pwm_a_y {
|
|
mux {
|
|
groups = "pwm_a_y";
|
|
function = "pwm_a_y";
|
|
};
|
|
};
|
|
|
|
pwm_b_pins: pwm_b {
|
|
mux {
|
|
groups = "pwm_b";
|
|
function = "pwm_b";
|
|
};
|
|
};
|
|
|
|
pwm_d_pins: pwm_d {
|
|
mux {
|
|
groups = "pwm_d";
|
|
function = "pwm_d";
|
|
};
|
|
};
|
|
|
|
pwm_e_pins: pwm_e {
|
|
mux {
|
|
groups = "pwm_e";
|
|
function = "pwm_e";
|
|
};
|
|
};
|
|
|
|
pwm_f_x_pins: pwm_f_x {
|
|
mux {
|
|
groups = "pwm_f_x";
|
|
function = "pwm_f_x";
|
|
};
|
|
};
|
|
|
|
pwm_f_y_pins: pwm_f_y {
|
|
mux {
|
|
groups = "pwm_f_y";
|
|
function = "pwm_f_y";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
hiubus: hiubus@c883c000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xc883c000 0x0 0x2000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
|
|
|
|
clkc: clock-controller@0 {
|
|
compatible = "amlogic,gxbb-clkc";
|
|
#clock-cells = <1>;
|
|
reg = <0x0 0x0 0x0 0x3db>;
|
|
};
|
|
|
|
mailbox: mailbox@404 {
|
|
compatible = "amlogic,meson-gxbb-mhu";
|
|
reg = <0 0x404 0 0x4c>;
|
|
interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
|
|
<0 209 IRQ_TYPE_EDGE_RISING>,
|
|
<0 210 IRQ_TYPE_EDGE_RISING>;
|
|
#mbox-cells = <1>;
|
|
};
|
|
};
|
|
|
|
apb: apb@d0000000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xd0000000 0x0 0x200000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
|
|
};
|
|
|
|
usb0: usb@c9000000 {
|
|
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
|
|
reg = <0x0 0xc9000000 0x0 0x40000>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
|
|
clock-names = "otg";
|
|
phys = <&usb0_phy>;
|
|
phy-names = "usb2-phy";
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb@c9100000 {
|
|
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
|
|
reg = <0x0 0xc9100000 0x0 0x40000>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
|
|
clock-names = "otg";
|
|
phys = <&usb1_phy>;
|
|
phy-names = "usb2-phy";
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
ethmac: ethernet@c9410000 {
|
|
compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
|
|
reg = <0x0 0xc9410000 0x0 0x10000
|
|
0x0 0xc8834540 0x0 0x4>;
|
|
interrupts = <0 8 1>;
|
|
interrupt-names = "macirq";
|
|
clocks = <&clkc CLKID_ETH>,
|
|
<&clkc CLKID_FCLK_DIV2>,
|
|
<&clkc CLKID_MPLL2>;
|
|
clock-names = "stmmaceth", "clkin0", "clkin1";
|
|
phy-mode = "rgmii";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|