forked from Minki/linux
94604548aa
This patch provides counters for SRv6 Behaviors as defined in [1], section 6. For each SRv6 Behavior instance, counters defined in [1] are: - the total number of packets that have been correctly processed; - the total amount of traffic in bytes of all packets that have been correctly processed; In addition, this patch introduces a new counter that counts the number of packets that have NOT been properly processed (i.e. errors) by an SRv6 Behavior instance. Counters are not only interesting for network monitoring purposes (i.e. counting the number of packets processed by a given behavior) but they also provide a simple tool for checking whether a behavior instance is working as we expect or not. Counters can be useful for troubleshooting misconfigured SRv6 networks. Indeed, an SRv6 Behavior can silently drop packets for very different reasons (i.e. wrong SID configuration, interfaces set with SID addresses, etc) without any notification/message to the user. Due to the nature of SRv6 networks, diagnostic tools such as ping and traceroute may be ineffective: paths used for reaching a given router can be totally different from the ones followed by probe packets. In addition, paths are often asymmetrical and this makes it even more difficult to keep up with the journey of the packets and to understand which behaviors are actually processing our traffic. When counters are enabled on an SRv6 Behavior instance, it is possible to verify if packets are actually processed by such behavior and what is the outcome of the processing. Therefore, the counters for SRv6 Behaviors offer an non-invasive observability point which can be leveraged for both traffic monitoring and troubleshooting purposes. [1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters Troubleshooting using SRv6 Behavior counters -------------------------------------------- Let's make a brief example to see how helpful counters can be for SRv6 networks. Let's consider a node where an SRv6 End Behavior receives an SRv6 packet whose Segment Left (SL) is equal to 0. In this case, the End Behavior (which accepts only packets with SL >= 1) discards the packet and increases the error counter. This information can be leveraged by the network operator for troubleshooting. Indeed, the error counter is telling the user that the packet: (i) arrived at the node; (ii) the packet has been taken into account by the SRv6 End behavior; (iii) but an error has occurred during the processing. The error (iii) could be caused by different reasons, such as wrong route settings on the node or due to an invalid SID List carried by the SRv6 packet. Anyway, the error counter is used to exclude that the packet did not arrive at the node or it has not been processed by the behavior at all. Turning on/off counters for SRv6 Behaviors ------------------------------------------ Each SRv6 Behavior instance can be configured, at the time of its creation, to make use of counters. This is done through iproute2 which allows the user to create an SRv6 Behavior instance specifying the optional "count" attribute as shown in the following example: $ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0 per-behavior counters can be shown by adding "-s" to the iproute2 command line, i.e.: $ ip -s -6 route show 2001:db8::1 2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Impact of counters for SRv6 Behaviors on performance ==================================================== To determine the performance impact due to the introduction of counters in the SRv6 Behavior subsystem, we have carried out extensive tests. We chose to test the throughput achieved by the SRv6 End.DX2 Behavior because, among all the other behaviors implemented so far, it reaches the highest throughput which is around 1.5 Mpps (per core at 2.4 GHz on a Xeon(R) CPU E5-2630 v3) on kernel 5.12-rc2 using packets of size ~ 100 bytes. Three different tests were conducted in order to evaluate the overall throughput of the SRv6 End.DX2 Behavior in the following scenarios: 1) vanilla kernel (without the SRv6 Behavior counters patch) and a single instance of an SRv6 End.DX2 Behavior; 2) patched kernel with SRv6 Behavior counters and a single instance of an SRv6 End.DX2 Behavior with counters turned off; 3) patched kernel with SRv6 Behavior counters and a single instance of SRv6 End.DX2 Behavior with counters turned on. All tests were performed on a testbed deployed on the CloudLab facilities [2], a flexible infrastructure dedicated to scientific research on the future of Cloud Computing. Results of tests are shown in the following table: Scenario (1): average 1504764,81 pps (~1504,76 kpps); std. dev 3956,82 pps Scenario (2): average 1501469,78 pps (~1501,47 kpps); std. dev 2979,85 pps Scenario (3): average 1501315,13 pps (~1501,32 kpps); std. dev 2956,00 pps As can be observed, throughputs achieved in scenarios (2),(3) did not suffer any observable degradation compared to scenario (1). Thanks to Jakub Kicinski and David Ahern for their valuable suggestions and comments provided during the discussion of the proposed RFCs. [2] https://www.cloudlab.us Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
1905 lines
44 KiB
C
1905 lines
44 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* SR-IPv6 implementation
|
|
*
|
|
* Authors:
|
|
* David Lebrun <david.lebrun@uclouvain.be>
|
|
* eBPF support: Mathieu Xhonneux <m.xhonneux@gmail.com>
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/net.h>
|
|
#include <linux/module.h>
|
|
#include <net/ip.h>
|
|
#include <net/lwtunnel.h>
|
|
#include <net/netevent.h>
|
|
#include <net/netns/generic.h>
|
|
#include <net/ip6_fib.h>
|
|
#include <net/route.h>
|
|
#include <net/seg6.h>
|
|
#include <linux/seg6.h>
|
|
#include <linux/seg6_local.h>
|
|
#include <net/addrconf.h>
|
|
#include <net/ip6_route.h>
|
|
#include <net/dst_cache.h>
|
|
#include <net/ip_tunnels.h>
|
|
#ifdef CONFIG_IPV6_SEG6_HMAC
|
|
#include <net/seg6_hmac.h>
|
|
#endif
|
|
#include <net/seg6_local.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/bpf.h>
|
|
|
|
#define SEG6_F_ATTR(i) BIT(i)
|
|
|
|
struct seg6_local_lwt;
|
|
|
|
/* callbacks used for customizing the creation and destruction of a behavior */
|
|
struct seg6_local_lwtunnel_ops {
|
|
int (*build_state)(struct seg6_local_lwt *slwt, const void *cfg,
|
|
struct netlink_ext_ack *extack);
|
|
void (*destroy_state)(struct seg6_local_lwt *slwt);
|
|
};
|
|
|
|
struct seg6_action_desc {
|
|
int action;
|
|
unsigned long attrs;
|
|
|
|
/* The optattrs field is used for specifying all the optional
|
|
* attributes supported by a specific behavior.
|
|
* It means that if one of these attributes is not provided in the
|
|
* netlink message during the behavior creation, no errors will be
|
|
* returned to the userspace.
|
|
*
|
|
* Each attribute can be only of two types (mutually exclusive):
|
|
* 1) required or 2) optional.
|
|
* Every user MUST obey to this rule! If you set an attribute as
|
|
* required the same attribute CANNOT be set as optional and vice
|
|
* versa.
|
|
*/
|
|
unsigned long optattrs;
|
|
|
|
int (*input)(struct sk_buff *skb, struct seg6_local_lwt *slwt);
|
|
int static_headroom;
|
|
|
|
struct seg6_local_lwtunnel_ops slwt_ops;
|
|
};
|
|
|
|
struct bpf_lwt_prog {
|
|
struct bpf_prog *prog;
|
|
char *name;
|
|
};
|
|
|
|
enum seg6_end_dt_mode {
|
|
DT_INVALID_MODE = -EINVAL,
|
|
DT_LEGACY_MODE = 0,
|
|
DT_VRF_MODE = 1,
|
|
};
|
|
|
|
struct seg6_end_dt_info {
|
|
enum seg6_end_dt_mode mode;
|
|
|
|
struct net *net;
|
|
/* VRF device associated to the routing table used by the SRv6
|
|
* End.DT4/DT6 behavior for routing IPv4/IPv6 packets.
|
|
*/
|
|
int vrf_ifindex;
|
|
int vrf_table;
|
|
|
|
/* tunneled packet proto and family (IPv4 or IPv6) */
|
|
__be16 proto;
|
|
u16 family;
|
|
int hdrlen;
|
|
};
|
|
|
|
struct pcpu_seg6_local_counters {
|
|
u64_stats_t packets;
|
|
u64_stats_t bytes;
|
|
u64_stats_t errors;
|
|
|
|
struct u64_stats_sync syncp;
|
|
};
|
|
|
|
/* This struct groups all the SRv6 Behavior counters supported so far.
|
|
*
|
|
* put_nla_counters() makes use of this data structure to collect all counter
|
|
* values after the per-CPU counter evaluation has been performed.
|
|
* Finally, each counter value (in seg6_local_counters) is stored in the
|
|
* corresponding netlink attribute and sent to user space.
|
|
*
|
|
* NB: we don't want to expose this structure to user space!
|
|
*/
|
|
struct seg6_local_counters {
|
|
__u64 packets;
|
|
__u64 bytes;
|
|
__u64 errors;
|
|
};
|
|
|
|
#define seg6_local_alloc_pcpu_counters(__gfp) \
|
|
__netdev_alloc_pcpu_stats(struct pcpu_seg6_local_counters, \
|
|
((__gfp) | __GFP_ZERO))
|
|
|
|
#define SEG6_F_LOCAL_COUNTERS SEG6_F_ATTR(SEG6_LOCAL_COUNTERS)
|
|
|
|
struct seg6_local_lwt {
|
|
int action;
|
|
struct ipv6_sr_hdr *srh;
|
|
int table;
|
|
struct in_addr nh4;
|
|
struct in6_addr nh6;
|
|
int iif;
|
|
int oif;
|
|
struct bpf_lwt_prog bpf;
|
|
#ifdef CONFIG_NET_L3_MASTER_DEV
|
|
struct seg6_end_dt_info dt_info;
|
|
#endif
|
|
struct pcpu_seg6_local_counters __percpu *pcpu_counters;
|
|
|
|
int headroom;
|
|
struct seg6_action_desc *desc;
|
|
/* unlike the required attrs, we have to track the optional attributes
|
|
* that have been effectively parsed.
|
|
*/
|
|
unsigned long parsed_optattrs;
|
|
};
|
|
|
|
static struct seg6_local_lwt *seg6_local_lwtunnel(struct lwtunnel_state *lwt)
|
|
{
|
|
return (struct seg6_local_lwt *)lwt->data;
|
|
}
|
|
|
|
static struct ipv6_sr_hdr *get_srh(struct sk_buff *skb, int flags)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
int len, srhoff = 0;
|
|
|
|
if (ipv6_find_hdr(skb, &srhoff, IPPROTO_ROUTING, NULL, &flags) < 0)
|
|
return NULL;
|
|
|
|
if (!pskb_may_pull(skb, srhoff + sizeof(*srh)))
|
|
return NULL;
|
|
|
|
srh = (struct ipv6_sr_hdr *)(skb->data + srhoff);
|
|
|
|
len = (srh->hdrlen + 1) << 3;
|
|
|
|
if (!pskb_may_pull(skb, srhoff + len))
|
|
return NULL;
|
|
|
|
/* note that pskb_may_pull may change pointers in header;
|
|
* for this reason it is necessary to reload them when needed.
|
|
*/
|
|
srh = (struct ipv6_sr_hdr *)(skb->data + srhoff);
|
|
|
|
if (!seg6_validate_srh(srh, len, true))
|
|
return NULL;
|
|
|
|
return srh;
|
|
}
|
|
|
|
static struct ipv6_sr_hdr *get_and_validate_srh(struct sk_buff *skb)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
|
|
srh = get_srh(skb, IP6_FH_F_SKIP_RH);
|
|
if (!srh)
|
|
return NULL;
|
|
|
|
#ifdef CONFIG_IPV6_SEG6_HMAC
|
|
if (!seg6_hmac_validate_skb(skb))
|
|
return NULL;
|
|
#endif
|
|
|
|
return srh;
|
|
}
|
|
|
|
static bool decap_and_validate(struct sk_buff *skb, int proto)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
unsigned int off = 0;
|
|
|
|
srh = get_srh(skb, 0);
|
|
if (srh && srh->segments_left > 0)
|
|
return false;
|
|
|
|
#ifdef CONFIG_IPV6_SEG6_HMAC
|
|
if (srh && !seg6_hmac_validate_skb(skb))
|
|
return false;
|
|
#endif
|
|
|
|
if (ipv6_find_hdr(skb, &off, proto, NULL, NULL) < 0)
|
|
return false;
|
|
|
|
if (!pskb_pull(skb, off))
|
|
return false;
|
|
|
|
skb_postpull_rcsum(skb, skb_network_header(skb), off);
|
|
|
|
skb_reset_network_header(skb);
|
|
skb_reset_transport_header(skb);
|
|
if (iptunnel_pull_offloads(skb))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void advance_nextseg(struct ipv6_sr_hdr *srh, struct in6_addr *daddr)
|
|
{
|
|
struct in6_addr *addr;
|
|
|
|
srh->segments_left--;
|
|
addr = srh->segments + srh->segments_left;
|
|
*daddr = *addr;
|
|
}
|
|
|
|
static int
|
|
seg6_lookup_any_nexthop(struct sk_buff *skb, struct in6_addr *nhaddr,
|
|
u32 tbl_id, bool local_delivery)
|
|
{
|
|
struct net *net = dev_net(skb->dev);
|
|
struct ipv6hdr *hdr = ipv6_hdr(skb);
|
|
int flags = RT6_LOOKUP_F_HAS_SADDR;
|
|
struct dst_entry *dst = NULL;
|
|
struct rt6_info *rt;
|
|
struct flowi6 fl6;
|
|
int dev_flags = 0;
|
|
|
|
fl6.flowi6_iif = skb->dev->ifindex;
|
|
fl6.daddr = nhaddr ? *nhaddr : hdr->daddr;
|
|
fl6.saddr = hdr->saddr;
|
|
fl6.flowlabel = ip6_flowinfo(hdr);
|
|
fl6.flowi6_mark = skb->mark;
|
|
fl6.flowi6_proto = hdr->nexthdr;
|
|
|
|
if (nhaddr)
|
|
fl6.flowi6_flags = FLOWI_FLAG_KNOWN_NH;
|
|
|
|
if (!tbl_id) {
|
|
dst = ip6_route_input_lookup(net, skb->dev, &fl6, skb, flags);
|
|
} else {
|
|
struct fib6_table *table;
|
|
|
|
table = fib6_get_table(net, tbl_id);
|
|
if (!table)
|
|
goto out;
|
|
|
|
rt = ip6_pol_route(net, table, 0, &fl6, skb, flags);
|
|
dst = &rt->dst;
|
|
}
|
|
|
|
/* we want to discard traffic destined for local packet processing,
|
|
* if @local_delivery is set to false.
|
|
*/
|
|
if (!local_delivery)
|
|
dev_flags |= IFF_LOOPBACK;
|
|
|
|
if (dst && (dst->dev->flags & dev_flags) && !dst->error) {
|
|
dst_release(dst);
|
|
dst = NULL;
|
|
}
|
|
|
|
out:
|
|
if (!dst) {
|
|
rt = net->ipv6.ip6_blk_hole_entry;
|
|
dst = &rt->dst;
|
|
dst_hold(dst);
|
|
}
|
|
|
|
skb_dst_drop(skb);
|
|
skb_dst_set(skb, dst);
|
|
return dst->error;
|
|
}
|
|
|
|
int seg6_lookup_nexthop(struct sk_buff *skb,
|
|
struct in6_addr *nhaddr, u32 tbl_id)
|
|
{
|
|
return seg6_lookup_any_nexthop(skb, nhaddr, tbl_id, false);
|
|
}
|
|
|
|
/* regular endpoint function */
|
|
static int input_action_end(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
|
|
srh = get_and_validate_srh(skb);
|
|
if (!srh)
|
|
goto drop;
|
|
|
|
advance_nextseg(srh, &ipv6_hdr(skb)->daddr);
|
|
|
|
seg6_lookup_nexthop(skb, NULL, 0);
|
|
|
|
return dst_input(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* regular endpoint, and forward to specified nexthop */
|
|
static int input_action_end_x(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
|
|
srh = get_and_validate_srh(skb);
|
|
if (!srh)
|
|
goto drop;
|
|
|
|
advance_nextseg(srh, &ipv6_hdr(skb)->daddr);
|
|
|
|
seg6_lookup_nexthop(skb, &slwt->nh6, 0);
|
|
|
|
return dst_input(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int input_action_end_t(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
|
|
srh = get_and_validate_srh(skb);
|
|
if (!srh)
|
|
goto drop;
|
|
|
|
advance_nextseg(srh, &ipv6_hdr(skb)->daddr);
|
|
|
|
seg6_lookup_nexthop(skb, NULL, slwt->table);
|
|
|
|
return dst_input(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* decapsulate and forward inner L2 frame on specified interface */
|
|
static int input_action_end_dx2(struct sk_buff *skb,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct net *net = dev_net(skb->dev);
|
|
struct net_device *odev;
|
|
struct ethhdr *eth;
|
|
|
|
if (!decap_and_validate(skb, IPPROTO_ETHERNET))
|
|
goto drop;
|
|
|
|
if (!pskb_may_pull(skb, ETH_HLEN))
|
|
goto drop;
|
|
|
|
skb_reset_mac_header(skb);
|
|
eth = (struct ethhdr *)skb->data;
|
|
|
|
/* To determine the frame's protocol, we assume it is 802.3. This avoids
|
|
* a call to eth_type_trans(), which is not really relevant for our
|
|
* use case.
|
|
*/
|
|
if (!eth_proto_is_802_3(eth->h_proto))
|
|
goto drop;
|
|
|
|
odev = dev_get_by_index_rcu(net, slwt->oif);
|
|
if (!odev)
|
|
goto drop;
|
|
|
|
/* As we accept Ethernet frames, make sure the egress device is of
|
|
* the correct type.
|
|
*/
|
|
if (odev->type != ARPHRD_ETHER)
|
|
goto drop;
|
|
|
|
if (!(odev->flags & IFF_UP) || !netif_carrier_ok(odev))
|
|
goto drop;
|
|
|
|
skb_orphan(skb);
|
|
|
|
if (skb_warn_if_lro(skb))
|
|
goto drop;
|
|
|
|
skb_forward_csum(skb);
|
|
|
|
if (skb->len - ETH_HLEN > odev->mtu)
|
|
goto drop;
|
|
|
|
skb->dev = odev;
|
|
skb->protocol = eth->h_proto;
|
|
|
|
return dev_queue_xmit(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* decapsulate and forward to specified nexthop */
|
|
static int input_action_end_dx6(struct sk_buff *skb,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct in6_addr *nhaddr = NULL;
|
|
|
|
/* this function accepts IPv6 encapsulated packets, with either
|
|
* an SRH with SL=0, or no SRH.
|
|
*/
|
|
|
|
if (!decap_and_validate(skb, IPPROTO_IPV6))
|
|
goto drop;
|
|
|
|
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
|
|
goto drop;
|
|
|
|
/* The inner packet is not associated to any local interface,
|
|
* so we do not call netif_rx().
|
|
*
|
|
* If slwt->nh6 is set to ::, then lookup the nexthop for the
|
|
* inner packet's DA. Otherwise, use the specified nexthop.
|
|
*/
|
|
|
|
if (!ipv6_addr_any(&slwt->nh6))
|
|
nhaddr = &slwt->nh6;
|
|
|
|
skb_set_transport_header(skb, sizeof(struct ipv6hdr));
|
|
|
|
seg6_lookup_nexthop(skb, nhaddr, 0);
|
|
|
|
return dst_input(skb);
|
|
drop:
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int input_action_end_dx4(struct sk_buff *skb,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct iphdr *iph;
|
|
__be32 nhaddr;
|
|
int err;
|
|
|
|
if (!decap_and_validate(skb, IPPROTO_IPIP))
|
|
goto drop;
|
|
|
|
if (!pskb_may_pull(skb, sizeof(struct iphdr)))
|
|
goto drop;
|
|
|
|
skb->protocol = htons(ETH_P_IP);
|
|
|
|
iph = ip_hdr(skb);
|
|
|
|
nhaddr = slwt->nh4.s_addr ?: iph->daddr;
|
|
|
|
skb_dst_drop(skb);
|
|
|
|
skb_set_transport_header(skb, sizeof(struct iphdr));
|
|
|
|
err = ip_route_input(skb, nhaddr, iph->saddr, 0, skb->dev);
|
|
if (err)
|
|
goto drop;
|
|
|
|
return dst_input(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_L3_MASTER_DEV
|
|
static struct net *fib6_config_get_net(const struct fib6_config *fib6_cfg)
|
|
{
|
|
const struct nl_info *nli = &fib6_cfg->fc_nlinfo;
|
|
|
|
return nli->nl_net;
|
|
}
|
|
|
|
static int __seg6_end_dt_vrf_build(struct seg6_local_lwt *slwt, const void *cfg,
|
|
u16 family, struct netlink_ext_ack *extack)
|
|
{
|
|
struct seg6_end_dt_info *info = &slwt->dt_info;
|
|
int vrf_ifindex;
|
|
struct net *net;
|
|
|
|
net = fib6_config_get_net(cfg);
|
|
|
|
/* note that vrf_table was already set by parse_nla_vrftable() */
|
|
vrf_ifindex = l3mdev_ifindex_lookup_by_table_id(L3MDEV_TYPE_VRF, net,
|
|
info->vrf_table);
|
|
if (vrf_ifindex < 0) {
|
|
if (vrf_ifindex == -EPERM) {
|
|
NL_SET_ERR_MSG(extack,
|
|
"Strict mode for VRF is disabled");
|
|
} else if (vrf_ifindex == -ENODEV) {
|
|
NL_SET_ERR_MSG(extack,
|
|
"Table has no associated VRF device");
|
|
} else {
|
|
pr_debug("seg6local: SRv6 End.DT* creation error=%d\n",
|
|
vrf_ifindex);
|
|
}
|
|
|
|
return vrf_ifindex;
|
|
}
|
|
|
|
info->net = net;
|
|
info->vrf_ifindex = vrf_ifindex;
|
|
|
|
switch (family) {
|
|
case AF_INET:
|
|
info->proto = htons(ETH_P_IP);
|
|
info->hdrlen = sizeof(struct iphdr);
|
|
break;
|
|
case AF_INET6:
|
|
info->proto = htons(ETH_P_IPV6);
|
|
info->hdrlen = sizeof(struct ipv6hdr);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
info->family = family;
|
|
info->mode = DT_VRF_MODE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The SRv6 End.DT4/DT6 behavior extracts the inner (IPv4/IPv6) packet and
|
|
* routes the IPv4/IPv6 packet by looking at the configured routing table.
|
|
*
|
|
* In the SRv6 End.DT4/DT6 use case, we can receive traffic (IPv6+Segment
|
|
* Routing Header packets) from several interfaces and the outer IPv6
|
|
* destination address (DA) is used for retrieving the specific instance of the
|
|
* End.DT4/DT6 behavior that should process the packets.
|
|
*
|
|
* However, the inner IPv4/IPv6 packet is not really bound to any receiving
|
|
* interface and thus the End.DT4/DT6 sets the VRF (associated with the
|
|
* corresponding routing table) as the *receiving* interface.
|
|
* In other words, the End.DT4/DT6 processes a packet as if it has been received
|
|
* directly by the VRF (and not by one of its slave devices, if any).
|
|
* In this way, the VRF interface is used for routing the IPv4/IPv6 packet in
|
|
* according to the routing table configured by the End.DT4/DT6 instance.
|
|
*
|
|
* This design allows you to get some interesting features like:
|
|
* 1) the statistics on rx packets;
|
|
* 2) the possibility to install a packet sniffer on the receiving interface
|
|
* (the VRF one) for looking at the incoming packets;
|
|
* 3) the possibility to leverage the netfilter prerouting hook for the inner
|
|
* IPv4 packet.
|
|
*
|
|
* This function returns:
|
|
* - the sk_buff* when the VRF rcv handler has processed the packet correctly;
|
|
* - NULL when the skb is consumed by the VRF rcv handler;
|
|
* - a pointer which encodes a negative error number in case of error.
|
|
* Note that in this case, the function takes care of freeing the skb.
|
|
*/
|
|
static struct sk_buff *end_dt_vrf_rcv(struct sk_buff *skb, u16 family,
|
|
struct net_device *dev)
|
|
{
|
|
/* based on l3mdev_ip_rcv; we are only interested in the master */
|
|
if (unlikely(!netif_is_l3_master(dev) && !netif_has_l3_rx_handler(dev)))
|
|
goto drop;
|
|
|
|
if (unlikely(!dev->l3mdev_ops->l3mdev_l3_rcv))
|
|
goto drop;
|
|
|
|
/* the decap packet IPv4/IPv6 does not come with any mac header info.
|
|
* We must unset the mac header to allow the VRF device to rebuild it,
|
|
* just in case there is a sniffer attached on the device.
|
|
*/
|
|
skb_unset_mac_header(skb);
|
|
|
|
skb = dev->l3mdev_ops->l3mdev_l3_rcv(dev, skb, family);
|
|
if (!skb)
|
|
/* the skb buffer was consumed by the handler */
|
|
return NULL;
|
|
|
|
/* when a packet is received by a VRF or by one of its slaves, the
|
|
* master device reference is set into the skb.
|
|
*/
|
|
if (unlikely(skb->dev != dev || skb->skb_iif != dev->ifindex))
|
|
goto drop;
|
|
|
|
return skb;
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
static struct net_device *end_dt_get_vrf_rcu(struct sk_buff *skb,
|
|
struct seg6_end_dt_info *info)
|
|
{
|
|
int vrf_ifindex = info->vrf_ifindex;
|
|
struct net *net = info->net;
|
|
|
|
if (unlikely(vrf_ifindex < 0))
|
|
goto error;
|
|
|
|
if (unlikely(!net_eq(dev_net(skb->dev), net)))
|
|
goto error;
|
|
|
|
return dev_get_by_index_rcu(net, vrf_ifindex);
|
|
|
|
error:
|
|
return NULL;
|
|
}
|
|
|
|
static struct sk_buff *end_dt_vrf_core(struct sk_buff *skb,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_end_dt_info *info = &slwt->dt_info;
|
|
struct net_device *vrf;
|
|
|
|
vrf = end_dt_get_vrf_rcu(skb, info);
|
|
if (unlikely(!vrf))
|
|
goto drop;
|
|
|
|
skb->protocol = info->proto;
|
|
|
|
skb_dst_drop(skb);
|
|
|
|
skb_set_transport_header(skb, info->hdrlen);
|
|
|
|
return end_dt_vrf_rcv(skb, info->family, vrf);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
static int input_action_end_dt4(struct sk_buff *skb,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct iphdr *iph;
|
|
int err;
|
|
|
|
if (!decap_and_validate(skb, IPPROTO_IPIP))
|
|
goto drop;
|
|
|
|
if (!pskb_may_pull(skb, sizeof(struct iphdr)))
|
|
goto drop;
|
|
|
|
skb = end_dt_vrf_core(skb, slwt);
|
|
if (!skb)
|
|
/* packet has been processed and consumed by the VRF */
|
|
return 0;
|
|
|
|
if (IS_ERR(skb))
|
|
return PTR_ERR(skb);
|
|
|
|
iph = ip_hdr(skb);
|
|
|
|
err = ip_route_input(skb, iph->daddr, iph->saddr, 0, skb->dev);
|
|
if (unlikely(err))
|
|
goto drop;
|
|
|
|
return dst_input(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int seg6_end_dt4_build(struct seg6_local_lwt *slwt, const void *cfg,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
return __seg6_end_dt_vrf_build(slwt, cfg, AF_INET, extack);
|
|
}
|
|
|
|
static enum
|
|
seg6_end_dt_mode seg6_end_dt6_parse_mode(struct seg6_local_lwt *slwt)
|
|
{
|
|
unsigned long parsed_optattrs = slwt->parsed_optattrs;
|
|
bool legacy, vrfmode;
|
|
|
|
legacy = !!(parsed_optattrs & SEG6_F_ATTR(SEG6_LOCAL_TABLE));
|
|
vrfmode = !!(parsed_optattrs & SEG6_F_ATTR(SEG6_LOCAL_VRFTABLE));
|
|
|
|
if (!(legacy ^ vrfmode))
|
|
/* both are absent or present: invalid DT6 mode */
|
|
return DT_INVALID_MODE;
|
|
|
|
return legacy ? DT_LEGACY_MODE : DT_VRF_MODE;
|
|
}
|
|
|
|
static enum seg6_end_dt_mode seg6_end_dt6_get_mode(struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_end_dt_info *info = &slwt->dt_info;
|
|
|
|
return info->mode;
|
|
}
|
|
|
|
static int seg6_end_dt6_build(struct seg6_local_lwt *slwt, const void *cfg,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
enum seg6_end_dt_mode mode = seg6_end_dt6_parse_mode(slwt);
|
|
struct seg6_end_dt_info *info = &slwt->dt_info;
|
|
|
|
switch (mode) {
|
|
case DT_LEGACY_MODE:
|
|
info->mode = DT_LEGACY_MODE;
|
|
return 0;
|
|
case DT_VRF_MODE:
|
|
return __seg6_end_dt_vrf_build(slwt, cfg, AF_INET6, extack);
|
|
default:
|
|
NL_SET_ERR_MSG(extack, "table or vrftable must be specified");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int input_action_end_dt6(struct sk_buff *skb,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
if (!decap_and_validate(skb, IPPROTO_IPV6))
|
|
goto drop;
|
|
|
|
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
|
|
goto drop;
|
|
|
|
#ifdef CONFIG_NET_L3_MASTER_DEV
|
|
if (seg6_end_dt6_get_mode(slwt) == DT_LEGACY_MODE)
|
|
goto legacy_mode;
|
|
|
|
/* DT6_VRF_MODE */
|
|
skb = end_dt_vrf_core(skb, slwt);
|
|
if (!skb)
|
|
/* packet has been processed and consumed by the VRF */
|
|
return 0;
|
|
|
|
if (IS_ERR(skb))
|
|
return PTR_ERR(skb);
|
|
|
|
/* note: this time we do not need to specify the table because the VRF
|
|
* takes care of selecting the correct table.
|
|
*/
|
|
seg6_lookup_any_nexthop(skb, NULL, 0, true);
|
|
|
|
return dst_input(skb);
|
|
|
|
legacy_mode:
|
|
#endif
|
|
skb_set_transport_header(skb, sizeof(struct ipv6hdr));
|
|
|
|
seg6_lookup_any_nexthop(skb, NULL, slwt->table, true);
|
|
|
|
return dst_input(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* push an SRH on top of the current one */
|
|
static int input_action_end_b6(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
int err = -EINVAL;
|
|
|
|
srh = get_and_validate_srh(skb);
|
|
if (!srh)
|
|
goto drop;
|
|
|
|
err = seg6_do_srh_inline(skb, slwt->srh);
|
|
if (err)
|
|
goto drop;
|
|
|
|
ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
|
|
skb_set_transport_header(skb, sizeof(struct ipv6hdr));
|
|
|
|
seg6_lookup_nexthop(skb, NULL, 0);
|
|
|
|
return dst_input(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return err;
|
|
}
|
|
|
|
/* encapsulate within an outer IPv6 header and a specified SRH */
|
|
static int input_action_end_b6_encap(struct sk_buff *skb,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
int err = -EINVAL;
|
|
|
|
srh = get_and_validate_srh(skb);
|
|
if (!srh)
|
|
goto drop;
|
|
|
|
advance_nextseg(srh, &ipv6_hdr(skb)->daddr);
|
|
|
|
skb_reset_inner_headers(skb);
|
|
skb->encapsulation = 1;
|
|
|
|
err = seg6_do_srh_encap(skb, slwt->srh, IPPROTO_IPV6);
|
|
if (err)
|
|
goto drop;
|
|
|
|
ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
|
|
skb_set_transport_header(skb, sizeof(struct ipv6hdr));
|
|
|
|
seg6_lookup_nexthop(skb, NULL, 0);
|
|
|
|
return dst_input(skb);
|
|
|
|
drop:
|
|
kfree_skb(skb);
|
|
return err;
|
|
}
|
|
|
|
DEFINE_PER_CPU(struct seg6_bpf_srh_state, seg6_bpf_srh_states);
|
|
|
|
bool seg6_bpf_has_valid_srh(struct sk_buff *skb)
|
|
{
|
|
struct seg6_bpf_srh_state *srh_state =
|
|
this_cpu_ptr(&seg6_bpf_srh_states);
|
|
struct ipv6_sr_hdr *srh = srh_state->srh;
|
|
|
|
if (unlikely(srh == NULL))
|
|
return false;
|
|
|
|
if (unlikely(!srh_state->valid)) {
|
|
if ((srh_state->hdrlen & 7) != 0)
|
|
return false;
|
|
|
|
srh->hdrlen = (u8)(srh_state->hdrlen >> 3);
|
|
if (!seg6_validate_srh(srh, (srh->hdrlen + 1) << 3, true))
|
|
return false;
|
|
|
|
srh_state->valid = true;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static int input_action_end_bpf(struct sk_buff *skb,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_bpf_srh_state *srh_state =
|
|
this_cpu_ptr(&seg6_bpf_srh_states);
|
|
struct ipv6_sr_hdr *srh;
|
|
int ret;
|
|
|
|
srh = get_and_validate_srh(skb);
|
|
if (!srh) {
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
advance_nextseg(srh, &ipv6_hdr(skb)->daddr);
|
|
|
|
/* preempt_disable is needed to protect the per-CPU buffer srh_state,
|
|
* which is also accessed by the bpf_lwt_seg6_* helpers
|
|
*/
|
|
preempt_disable();
|
|
srh_state->srh = srh;
|
|
srh_state->hdrlen = srh->hdrlen << 3;
|
|
srh_state->valid = true;
|
|
|
|
rcu_read_lock();
|
|
bpf_compute_data_pointers(skb);
|
|
ret = bpf_prog_run_save_cb(slwt->bpf.prog, skb);
|
|
rcu_read_unlock();
|
|
|
|
switch (ret) {
|
|
case BPF_OK:
|
|
case BPF_REDIRECT:
|
|
break;
|
|
case BPF_DROP:
|
|
goto drop;
|
|
default:
|
|
pr_warn_once("bpf-seg6local: Illegal return value %u\n", ret);
|
|
goto drop;
|
|
}
|
|
|
|
if (srh_state->srh && !seg6_bpf_has_valid_srh(skb))
|
|
goto drop;
|
|
|
|
preempt_enable();
|
|
if (ret != BPF_REDIRECT)
|
|
seg6_lookup_nexthop(skb, NULL, 0);
|
|
|
|
return dst_input(skb);
|
|
|
|
drop:
|
|
preempt_enable();
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct seg6_action_desc seg6_action_table[] = {
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END,
|
|
.attrs = 0,
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
.input = input_action_end,
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_X,
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_NH6),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
.input = input_action_end_x,
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_T,
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_TABLE),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
.input = input_action_end_t,
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_DX2,
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_OIF),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
.input = input_action_end_dx2,
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_DX6,
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_NH6),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
.input = input_action_end_dx6,
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_DX4,
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_NH4),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
.input = input_action_end_dx4,
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_DT4,
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_VRFTABLE),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
#ifdef CONFIG_NET_L3_MASTER_DEV
|
|
.input = input_action_end_dt4,
|
|
.slwt_ops = {
|
|
.build_state = seg6_end_dt4_build,
|
|
},
|
|
#endif
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_DT6,
|
|
#ifdef CONFIG_NET_L3_MASTER_DEV
|
|
.attrs = 0,
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS |
|
|
SEG6_F_ATTR(SEG6_LOCAL_TABLE) |
|
|
SEG6_F_ATTR(SEG6_LOCAL_VRFTABLE),
|
|
.slwt_ops = {
|
|
.build_state = seg6_end_dt6_build,
|
|
},
|
|
#else
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_TABLE),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
#endif
|
|
.input = input_action_end_dt6,
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_B6,
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_SRH),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
.input = input_action_end_b6,
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_B6_ENCAP,
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_SRH),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
.input = input_action_end_b6_encap,
|
|
.static_headroom = sizeof(struct ipv6hdr),
|
|
},
|
|
{
|
|
.action = SEG6_LOCAL_ACTION_END_BPF,
|
|
.attrs = SEG6_F_ATTR(SEG6_LOCAL_BPF),
|
|
.optattrs = SEG6_F_LOCAL_COUNTERS,
|
|
.input = input_action_end_bpf,
|
|
},
|
|
|
|
};
|
|
|
|
static struct seg6_action_desc *__get_action_desc(int action)
|
|
{
|
|
struct seg6_action_desc *desc;
|
|
int i, count;
|
|
|
|
count = ARRAY_SIZE(seg6_action_table);
|
|
for (i = 0; i < count; i++) {
|
|
desc = &seg6_action_table[i];
|
|
if (desc->action == action)
|
|
return desc;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static bool seg6_lwtunnel_counters_enabled(struct seg6_local_lwt *slwt)
|
|
{
|
|
return slwt->parsed_optattrs & SEG6_F_LOCAL_COUNTERS;
|
|
}
|
|
|
|
static void seg6_local_update_counters(struct seg6_local_lwt *slwt,
|
|
unsigned int len, int err)
|
|
{
|
|
struct pcpu_seg6_local_counters *pcounters;
|
|
|
|
pcounters = this_cpu_ptr(slwt->pcpu_counters);
|
|
u64_stats_update_begin(&pcounters->syncp);
|
|
|
|
if (likely(!err)) {
|
|
u64_stats_inc(&pcounters->packets);
|
|
u64_stats_add(&pcounters->bytes, len);
|
|
} else {
|
|
u64_stats_inc(&pcounters->errors);
|
|
}
|
|
|
|
u64_stats_update_end(&pcounters->syncp);
|
|
}
|
|
|
|
static int seg6_local_input(struct sk_buff *skb)
|
|
{
|
|
struct dst_entry *orig_dst = skb_dst(skb);
|
|
struct seg6_action_desc *desc;
|
|
struct seg6_local_lwt *slwt;
|
|
unsigned int len = skb->len;
|
|
int rc;
|
|
|
|
if (skb->protocol != htons(ETH_P_IPV6)) {
|
|
kfree_skb(skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
slwt = seg6_local_lwtunnel(orig_dst->lwtstate);
|
|
desc = slwt->desc;
|
|
|
|
rc = desc->input(skb, slwt);
|
|
|
|
if (!seg6_lwtunnel_counters_enabled(slwt))
|
|
return rc;
|
|
|
|
seg6_local_update_counters(slwt, len, rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static const struct nla_policy seg6_local_policy[SEG6_LOCAL_MAX + 1] = {
|
|
[SEG6_LOCAL_ACTION] = { .type = NLA_U32 },
|
|
[SEG6_LOCAL_SRH] = { .type = NLA_BINARY },
|
|
[SEG6_LOCAL_TABLE] = { .type = NLA_U32 },
|
|
[SEG6_LOCAL_VRFTABLE] = { .type = NLA_U32 },
|
|
[SEG6_LOCAL_NH4] = { .type = NLA_BINARY,
|
|
.len = sizeof(struct in_addr) },
|
|
[SEG6_LOCAL_NH6] = { .type = NLA_BINARY,
|
|
.len = sizeof(struct in6_addr) },
|
|
[SEG6_LOCAL_IIF] = { .type = NLA_U32 },
|
|
[SEG6_LOCAL_OIF] = { .type = NLA_U32 },
|
|
[SEG6_LOCAL_BPF] = { .type = NLA_NESTED },
|
|
[SEG6_LOCAL_COUNTERS] = { .type = NLA_NESTED },
|
|
};
|
|
|
|
static int parse_nla_srh(struct nlattr **attrs, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
int len;
|
|
|
|
srh = nla_data(attrs[SEG6_LOCAL_SRH]);
|
|
len = nla_len(attrs[SEG6_LOCAL_SRH]);
|
|
|
|
/* SRH must contain at least one segment */
|
|
if (len < sizeof(*srh) + sizeof(struct in6_addr))
|
|
return -EINVAL;
|
|
|
|
if (!seg6_validate_srh(srh, len, false))
|
|
return -EINVAL;
|
|
|
|
slwt->srh = kmemdup(srh, len, GFP_KERNEL);
|
|
if (!slwt->srh)
|
|
return -ENOMEM;
|
|
|
|
slwt->headroom += len;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int put_nla_srh(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct ipv6_sr_hdr *srh;
|
|
struct nlattr *nla;
|
|
int len;
|
|
|
|
srh = slwt->srh;
|
|
len = (srh->hdrlen + 1) << 3;
|
|
|
|
nla = nla_reserve(skb, SEG6_LOCAL_SRH, len);
|
|
if (!nla)
|
|
return -EMSGSIZE;
|
|
|
|
memcpy(nla_data(nla), srh, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmp_nla_srh(struct seg6_local_lwt *a, struct seg6_local_lwt *b)
|
|
{
|
|
int len = (a->srh->hdrlen + 1) << 3;
|
|
|
|
if (len != ((b->srh->hdrlen + 1) << 3))
|
|
return 1;
|
|
|
|
return memcmp(a->srh, b->srh, len);
|
|
}
|
|
|
|
static void destroy_attr_srh(struct seg6_local_lwt *slwt)
|
|
{
|
|
kfree(slwt->srh);
|
|
}
|
|
|
|
static int parse_nla_table(struct nlattr **attrs, struct seg6_local_lwt *slwt)
|
|
{
|
|
slwt->table = nla_get_u32(attrs[SEG6_LOCAL_TABLE]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int put_nla_table(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
if (nla_put_u32(skb, SEG6_LOCAL_TABLE, slwt->table))
|
|
return -EMSGSIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmp_nla_table(struct seg6_local_lwt *a, struct seg6_local_lwt *b)
|
|
{
|
|
if (a->table != b->table)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct
|
|
seg6_end_dt_info *seg6_possible_end_dt_info(struct seg6_local_lwt *slwt)
|
|
{
|
|
#ifdef CONFIG_NET_L3_MASTER_DEV
|
|
return &slwt->dt_info;
|
|
#else
|
|
return ERR_PTR(-EOPNOTSUPP);
|
|
#endif
|
|
}
|
|
|
|
static int parse_nla_vrftable(struct nlattr **attrs,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_end_dt_info *info = seg6_possible_end_dt_info(slwt);
|
|
|
|
if (IS_ERR(info))
|
|
return PTR_ERR(info);
|
|
|
|
info->vrf_table = nla_get_u32(attrs[SEG6_LOCAL_VRFTABLE]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int put_nla_vrftable(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_end_dt_info *info = seg6_possible_end_dt_info(slwt);
|
|
|
|
if (IS_ERR(info))
|
|
return PTR_ERR(info);
|
|
|
|
if (nla_put_u32(skb, SEG6_LOCAL_VRFTABLE, info->vrf_table))
|
|
return -EMSGSIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmp_nla_vrftable(struct seg6_local_lwt *a, struct seg6_local_lwt *b)
|
|
{
|
|
struct seg6_end_dt_info *info_a = seg6_possible_end_dt_info(a);
|
|
struct seg6_end_dt_info *info_b = seg6_possible_end_dt_info(b);
|
|
|
|
if (info_a->vrf_table != info_b->vrf_table)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int parse_nla_nh4(struct nlattr **attrs, struct seg6_local_lwt *slwt)
|
|
{
|
|
memcpy(&slwt->nh4, nla_data(attrs[SEG6_LOCAL_NH4]),
|
|
sizeof(struct in_addr));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int put_nla_nh4(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct nlattr *nla;
|
|
|
|
nla = nla_reserve(skb, SEG6_LOCAL_NH4, sizeof(struct in_addr));
|
|
if (!nla)
|
|
return -EMSGSIZE;
|
|
|
|
memcpy(nla_data(nla), &slwt->nh4, sizeof(struct in_addr));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmp_nla_nh4(struct seg6_local_lwt *a, struct seg6_local_lwt *b)
|
|
{
|
|
return memcmp(&a->nh4, &b->nh4, sizeof(struct in_addr));
|
|
}
|
|
|
|
static int parse_nla_nh6(struct nlattr **attrs, struct seg6_local_lwt *slwt)
|
|
{
|
|
memcpy(&slwt->nh6, nla_data(attrs[SEG6_LOCAL_NH6]),
|
|
sizeof(struct in6_addr));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int put_nla_nh6(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct nlattr *nla;
|
|
|
|
nla = nla_reserve(skb, SEG6_LOCAL_NH6, sizeof(struct in6_addr));
|
|
if (!nla)
|
|
return -EMSGSIZE;
|
|
|
|
memcpy(nla_data(nla), &slwt->nh6, sizeof(struct in6_addr));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmp_nla_nh6(struct seg6_local_lwt *a, struct seg6_local_lwt *b)
|
|
{
|
|
return memcmp(&a->nh6, &b->nh6, sizeof(struct in6_addr));
|
|
}
|
|
|
|
static int parse_nla_iif(struct nlattr **attrs, struct seg6_local_lwt *slwt)
|
|
{
|
|
slwt->iif = nla_get_u32(attrs[SEG6_LOCAL_IIF]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int put_nla_iif(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
if (nla_put_u32(skb, SEG6_LOCAL_IIF, slwt->iif))
|
|
return -EMSGSIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmp_nla_iif(struct seg6_local_lwt *a, struct seg6_local_lwt *b)
|
|
{
|
|
if (a->iif != b->iif)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int parse_nla_oif(struct nlattr **attrs, struct seg6_local_lwt *slwt)
|
|
{
|
|
slwt->oif = nla_get_u32(attrs[SEG6_LOCAL_OIF]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int put_nla_oif(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
if (nla_put_u32(skb, SEG6_LOCAL_OIF, slwt->oif))
|
|
return -EMSGSIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmp_nla_oif(struct seg6_local_lwt *a, struct seg6_local_lwt *b)
|
|
{
|
|
if (a->oif != b->oif)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MAX_PROG_NAME 256
|
|
static const struct nla_policy bpf_prog_policy[SEG6_LOCAL_BPF_PROG_MAX + 1] = {
|
|
[SEG6_LOCAL_BPF_PROG] = { .type = NLA_U32, },
|
|
[SEG6_LOCAL_BPF_PROG_NAME] = { .type = NLA_NUL_STRING,
|
|
.len = MAX_PROG_NAME },
|
|
};
|
|
|
|
static int parse_nla_bpf(struct nlattr **attrs, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct nlattr *tb[SEG6_LOCAL_BPF_PROG_MAX + 1];
|
|
struct bpf_prog *p;
|
|
int ret;
|
|
u32 fd;
|
|
|
|
ret = nla_parse_nested_deprecated(tb, SEG6_LOCAL_BPF_PROG_MAX,
|
|
attrs[SEG6_LOCAL_BPF],
|
|
bpf_prog_policy, NULL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!tb[SEG6_LOCAL_BPF_PROG] || !tb[SEG6_LOCAL_BPF_PROG_NAME])
|
|
return -EINVAL;
|
|
|
|
slwt->bpf.name = nla_memdup(tb[SEG6_LOCAL_BPF_PROG_NAME], GFP_KERNEL);
|
|
if (!slwt->bpf.name)
|
|
return -ENOMEM;
|
|
|
|
fd = nla_get_u32(tb[SEG6_LOCAL_BPF_PROG]);
|
|
p = bpf_prog_get_type(fd, BPF_PROG_TYPE_LWT_SEG6LOCAL);
|
|
if (IS_ERR(p)) {
|
|
kfree(slwt->bpf.name);
|
|
return PTR_ERR(p);
|
|
}
|
|
|
|
slwt->bpf.prog = p;
|
|
return 0;
|
|
}
|
|
|
|
static int put_nla_bpf(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct nlattr *nest;
|
|
|
|
if (!slwt->bpf.prog)
|
|
return 0;
|
|
|
|
nest = nla_nest_start_noflag(skb, SEG6_LOCAL_BPF);
|
|
if (!nest)
|
|
return -EMSGSIZE;
|
|
|
|
if (nla_put_u32(skb, SEG6_LOCAL_BPF_PROG, slwt->bpf.prog->aux->id))
|
|
return -EMSGSIZE;
|
|
|
|
if (slwt->bpf.name &&
|
|
nla_put_string(skb, SEG6_LOCAL_BPF_PROG_NAME, slwt->bpf.name))
|
|
return -EMSGSIZE;
|
|
|
|
return nla_nest_end(skb, nest);
|
|
}
|
|
|
|
static int cmp_nla_bpf(struct seg6_local_lwt *a, struct seg6_local_lwt *b)
|
|
{
|
|
if (!a->bpf.name && !b->bpf.name)
|
|
return 0;
|
|
|
|
if (!a->bpf.name || !b->bpf.name)
|
|
return 1;
|
|
|
|
return strcmp(a->bpf.name, b->bpf.name);
|
|
}
|
|
|
|
static void destroy_attr_bpf(struct seg6_local_lwt *slwt)
|
|
{
|
|
kfree(slwt->bpf.name);
|
|
if (slwt->bpf.prog)
|
|
bpf_prog_put(slwt->bpf.prog);
|
|
}
|
|
|
|
static const struct
|
|
nla_policy seg6_local_counters_policy[SEG6_LOCAL_CNT_MAX + 1] = {
|
|
[SEG6_LOCAL_CNT_PACKETS] = { .type = NLA_U64 },
|
|
[SEG6_LOCAL_CNT_BYTES] = { .type = NLA_U64 },
|
|
[SEG6_LOCAL_CNT_ERRORS] = { .type = NLA_U64 },
|
|
};
|
|
|
|
static int parse_nla_counters(struct nlattr **attrs,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct pcpu_seg6_local_counters __percpu *pcounters;
|
|
struct nlattr *tb[SEG6_LOCAL_CNT_MAX + 1];
|
|
int ret;
|
|
|
|
ret = nla_parse_nested_deprecated(tb, SEG6_LOCAL_CNT_MAX,
|
|
attrs[SEG6_LOCAL_COUNTERS],
|
|
seg6_local_counters_policy, NULL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* basic support for SRv6 Behavior counters requires at least:
|
|
* packets, bytes and errors.
|
|
*/
|
|
if (!tb[SEG6_LOCAL_CNT_PACKETS] || !tb[SEG6_LOCAL_CNT_BYTES] ||
|
|
!tb[SEG6_LOCAL_CNT_ERRORS])
|
|
return -EINVAL;
|
|
|
|
/* counters are always zero initialized */
|
|
pcounters = seg6_local_alloc_pcpu_counters(GFP_KERNEL);
|
|
if (!pcounters)
|
|
return -ENOMEM;
|
|
|
|
slwt->pcpu_counters = pcounters;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int seg6_local_fill_nla_counters(struct sk_buff *skb,
|
|
struct seg6_local_counters *counters)
|
|
{
|
|
if (nla_put_u64_64bit(skb, SEG6_LOCAL_CNT_PACKETS, counters->packets,
|
|
SEG6_LOCAL_CNT_PAD))
|
|
return -EMSGSIZE;
|
|
|
|
if (nla_put_u64_64bit(skb, SEG6_LOCAL_CNT_BYTES, counters->bytes,
|
|
SEG6_LOCAL_CNT_PAD))
|
|
return -EMSGSIZE;
|
|
|
|
if (nla_put_u64_64bit(skb, SEG6_LOCAL_CNT_ERRORS, counters->errors,
|
|
SEG6_LOCAL_CNT_PAD))
|
|
return -EMSGSIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int put_nla_counters(struct sk_buff *skb, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_local_counters counters = { 0, 0, 0 };
|
|
struct nlattr *nest;
|
|
int rc, i;
|
|
|
|
nest = nla_nest_start(skb, SEG6_LOCAL_COUNTERS);
|
|
if (!nest)
|
|
return -EMSGSIZE;
|
|
|
|
for_each_possible_cpu(i) {
|
|
struct pcpu_seg6_local_counters *pcounters;
|
|
u64 packets, bytes, errors;
|
|
unsigned int start;
|
|
|
|
pcounters = per_cpu_ptr(slwt->pcpu_counters, i);
|
|
do {
|
|
start = u64_stats_fetch_begin_irq(&pcounters->syncp);
|
|
|
|
packets = u64_stats_read(&pcounters->packets);
|
|
bytes = u64_stats_read(&pcounters->bytes);
|
|
errors = u64_stats_read(&pcounters->errors);
|
|
|
|
} while (u64_stats_fetch_retry_irq(&pcounters->syncp, start));
|
|
|
|
counters.packets += packets;
|
|
counters.bytes += bytes;
|
|
counters.errors += errors;
|
|
}
|
|
|
|
rc = seg6_local_fill_nla_counters(skb, &counters);
|
|
if (rc < 0) {
|
|
nla_nest_cancel(skb, nest);
|
|
return rc;
|
|
}
|
|
|
|
return nla_nest_end(skb, nest);
|
|
}
|
|
|
|
static int cmp_nla_counters(struct seg6_local_lwt *a, struct seg6_local_lwt *b)
|
|
{
|
|
/* a and b are equal if both have pcpu_counters set or not */
|
|
return (!!((unsigned long)a->pcpu_counters)) ^
|
|
(!!((unsigned long)b->pcpu_counters));
|
|
}
|
|
|
|
static void destroy_attr_counters(struct seg6_local_lwt *slwt)
|
|
{
|
|
free_percpu(slwt->pcpu_counters);
|
|
}
|
|
|
|
struct seg6_action_param {
|
|
int (*parse)(struct nlattr **attrs, struct seg6_local_lwt *slwt);
|
|
int (*put)(struct sk_buff *skb, struct seg6_local_lwt *slwt);
|
|
int (*cmp)(struct seg6_local_lwt *a, struct seg6_local_lwt *b);
|
|
|
|
/* optional destroy() callback useful for releasing resources which
|
|
* have been previously acquired in the corresponding parse()
|
|
* function.
|
|
*/
|
|
void (*destroy)(struct seg6_local_lwt *slwt);
|
|
};
|
|
|
|
static struct seg6_action_param seg6_action_params[SEG6_LOCAL_MAX + 1] = {
|
|
[SEG6_LOCAL_SRH] = { .parse = parse_nla_srh,
|
|
.put = put_nla_srh,
|
|
.cmp = cmp_nla_srh,
|
|
.destroy = destroy_attr_srh },
|
|
|
|
[SEG6_LOCAL_TABLE] = { .parse = parse_nla_table,
|
|
.put = put_nla_table,
|
|
.cmp = cmp_nla_table },
|
|
|
|
[SEG6_LOCAL_NH4] = { .parse = parse_nla_nh4,
|
|
.put = put_nla_nh4,
|
|
.cmp = cmp_nla_nh4 },
|
|
|
|
[SEG6_LOCAL_NH6] = { .parse = parse_nla_nh6,
|
|
.put = put_nla_nh6,
|
|
.cmp = cmp_nla_nh6 },
|
|
|
|
[SEG6_LOCAL_IIF] = { .parse = parse_nla_iif,
|
|
.put = put_nla_iif,
|
|
.cmp = cmp_nla_iif },
|
|
|
|
[SEG6_LOCAL_OIF] = { .parse = parse_nla_oif,
|
|
.put = put_nla_oif,
|
|
.cmp = cmp_nla_oif },
|
|
|
|
[SEG6_LOCAL_BPF] = { .parse = parse_nla_bpf,
|
|
.put = put_nla_bpf,
|
|
.cmp = cmp_nla_bpf,
|
|
.destroy = destroy_attr_bpf },
|
|
|
|
[SEG6_LOCAL_VRFTABLE] = { .parse = parse_nla_vrftable,
|
|
.put = put_nla_vrftable,
|
|
.cmp = cmp_nla_vrftable },
|
|
|
|
[SEG6_LOCAL_COUNTERS] = { .parse = parse_nla_counters,
|
|
.put = put_nla_counters,
|
|
.cmp = cmp_nla_counters,
|
|
.destroy = destroy_attr_counters },
|
|
};
|
|
|
|
/* call the destroy() callback (if available) for each set attribute in
|
|
* @parsed_attrs, starting from the first attribute up to the @max_parsed
|
|
* (excluded) attribute.
|
|
*/
|
|
static void __destroy_attrs(unsigned long parsed_attrs, int max_parsed,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_action_param *param;
|
|
int i;
|
|
|
|
/* Every required seg6local attribute is identified by an ID which is
|
|
* encoded as a flag (i.e: 1 << ID) in the 'attrs' bitmask;
|
|
*
|
|
* We scan the 'parsed_attrs' bitmask, starting from the first attribute
|
|
* up to the @max_parsed (excluded) attribute.
|
|
* For each set attribute, we retrieve the corresponding destroy()
|
|
* callback. If the callback is not available, then we skip to the next
|
|
* attribute; otherwise, we call the destroy() callback.
|
|
*/
|
|
for (i = 0; i < max_parsed; ++i) {
|
|
if (!(parsed_attrs & SEG6_F_ATTR(i)))
|
|
continue;
|
|
|
|
param = &seg6_action_params[i];
|
|
|
|
if (param->destroy)
|
|
param->destroy(slwt);
|
|
}
|
|
}
|
|
|
|
/* release all the resources that may have been acquired during parsing
|
|
* operations.
|
|
*/
|
|
static void destroy_attrs(struct seg6_local_lwt *slwt)
|
|
{
|
|
unsigned long attrs = slwt->desc->attrs | slwt->parsed_optattrs;
|
|
|
|
__destroy_attrs(attrs, SEG6_LOCAL_MAX + 1, slwt);
|
|
}
|
|
|
|
static int parse_nla_optional_attrs(struct nlattr **attrs,
|
|
struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_action_desc *desc = slwt->desc;
|
|
unsigned long parsed_optattrs = 0;
|
|
struct seg6_action_param *param;
|
|
int err, i;
|
|
|
|
for (i = 0; i < SEG6_LOCAL_MAX + 1; ++i) {
|
|
if (!(desc->optattrs & SEG6_F_ATTR(i)) || !attrs[i])
|
|
continue;
|
|
|
|
/* once here, the i-th attribute is provided by the
|
|
* userspace AND it is identified optional as well.
|
|
*/
|
|
param = &seg6_action_params[i];
|
|
|
|
err = param->parse(attrs, slwt);
|
|
if (err < 0)
|
|
goto parse_optattrs_err;
|
|
|
|
/* current attribute has been correctly parsed */
|
|
parsed_optattrs |= SEG6_F_ATTR(i);
|
|
}
|
|
|
|
/* store in the tunnel state all the optional attributed successfully
|
|
* parsed.
|
|
*/
|
|
slwt->parsed_optattrs = parsed_optattrs;
|
|
|
|
return 0;
|
|
|
|
parse_optattrs_err:
|
|
__destroy_attrs(parsed_optattrs, i, slwt);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* call the custom constructor of the behavior during its initialization phase
|
|
* and after that all its attributes have been parsed successfully.
|
|
*/
|
|
static int
|
|
seg6_local_lwtunnel_build_state(struct seg6_local_lwt *slwt, const void *cfg,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct seg6_action_desc *desc = slwt->desc;
|
|
struct seg6_local_lwtunnel_ops *ops;
|
|
|
|
ops = &desc->slwt_ops;
|
|
if (!ops->build_state)
|
|
return 0;
|
|
|
|
return ops->build_state(slwt, cfg, extack);
|
|
}
|
|
|
|
/* call the custom destructor of the behavior which is invoked before the
|
|
* tunnel is going to be destroyed.
|
|
*/
|
|
static void seg6_local_lwtunnel_destroy_state(struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_action_desc *desc = slwt->desc;
|
|
struct seg6_local_lwtunnel_ops *ops;
|
|
|
|
ops = &desc->slwt_ops;
|
|
if (!ops->destroy_state)
|
|
return;
|
|
|
|
ops->destroy_state(slwt);
|
|
}
|
|
|
|
static int parse_nla_action(struct nlattr **attrs, struct seg6_local_lwt *slwt)
|
|
{
|
|
struct seg6_action_param *param;
|
|
struct seg6_action_desc *desc;
|
|
unsigned long invalid_attrs;
|
|
int i, err;
|
|
|
|
desc = __get_action_desc(slwt->action);
|
|
if (!desc)
|
|
return -EINVAL;
|
|
|
|
if (!desc->input)
|
|
return -EOPNOTSUPP;
|
|
|
|
slwt->desc = desc;
|
|
slwt->headroom += desc->static_headroom;
|
|
|
|
/* Forcing the desc->optattrs *set* and the desc->attrs *set* to be
|
|
* disjoined, this allow us to release acquired resources by optional
|
|
* attributes and by required attributes independently from each other
|
|
* without any interference.
|
|
* In other terms, we are sure that we do not release some the acquired
|
|
* resources twice.
|
|
*
|
|
* Note that if an attribute is configured both as required and as
|
|
* optional, it means that the user has messed something up in the
|
|
* seg6_action_table. Therefore, this check is required for SRv6
|
|
* behaviors to work properly.
|
|
*/
|
|
invalid_attrs = desc->attrs & desc->optattrs;
|
|
if (invalid_attrs) {
|
|
WARN_ONCE(1,
|
|
"An attribute cannot be both required AND optional");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* parse the required attributes */
|
|
for (i = 0; i < SEG6_LOCAL_MAX + 1; i++) {
|
|
if (desc->attrs & SEG6_F_ATTR(i)) {
|
|
if (!attrs[i])
|
|
return -EINVAL;
|
|
|
|
param = &seg6_action_params[i];
|
|
|
|
err = param->parse(attrs, slwt);
|
|
if (err < 0)
|
|
goto parse_attrs_err;
|
|
}
|
|
}
|
|
|
|
/* parse the optional attributes, if any */
|
|
err = parse_nla_optional_attrs(attrs, slwt);
|
|
if (err < 0)
|
|
goto parse_attrs_err;
|
|
|
|
return 0;
|
|
|
|
parse_attrs_err:
|
|
/* release any resource that may have been acquired during the i-1
|
|
* parse() operations.
|
|
*/
|
|
__destroy_attrs(desc->attrs, i, slwt);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int seg6_local_build_state(struct net *net, struct nlattr *nla,
|
|
unsigned int family, const void *cfg,
|
|
struct lwtunnel_state **ts,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct nlattr *tb[SEG6_LOCAL_MAX + 1];
|
|
struct lwtunnel_state *newts;
|
|
struct seg6_local_lwt *slwt;
|
|
int err;
|
|
|
|
if (family != AF_INET6)
|
|
return -EINVAL;
|
|
|
|
err = nla_parse_nested_deprecated(tb, SEG6_LOCAL_MAX, nla,
|
|
seg6_local_policy, extack);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (!tb[SEG6_LOCAL_ACTION])
|
|
return -EINVAL;
|
|
|
|
newts = lwtunnel_state_alloc(sizeof(*slwt));
|
|
if (!newts)
|
|
return -ENOMEM;
|
|
|
|
slwt = seg6_local_lwtunnel(newts);
|
|
slwt->action = nla_get_u32(tb[SEG6_LOCAL_ACTION]);
|
|
|
|
err = parse_nla_action(tb, slwt);
|
|
if (err < 0)
|
|
goto out_free;
|
|
|
|
err = seg6_local_lwtunnel_build_state(slwt, cfg, extack);
|
|
if (err < 0)
|
|
goto out_destroy_attrs;
|
|
|
|
newts->type = LWTUNNEL_ENCAP_SEG6_LOCAL;
|
|
newts->flags = LWTUNNEL_STATE_INPUT_REDIRECT;
|
|
newts->headroom = slwt->headroom;
|
|
|
|
*ts = newts;
|
|
|
|
return 0;
|
|
|
|
out_destroy_attrs:
|
|
destroy_attrs(slwt);
|
|
out_free:
|
|
kfree(newts);
|
|
return err;
|
|
}
|
|
|
|
static void seg6_local_destroy_state(struct lwtunnel_state *lwt)
|
|
{
|
|
struct seg6_local_lwt *slwt = seg6_local_lwtunnel(lwt);
|
|
|
|
seg6_local_lwtunnel_destroy_state(slwt);
|
|
|
|
destroy_attrs(slwt);
|
|
|
|
return;
|
|
}
|
|
|
|
static int seg6_local_fill_encap(struct sk_buff *skb,
|
|
struct lwtunnel_state *lwt)
|
|
{
|
|
struct seg6_local_lwt *slwt = seg6_local_lwtunnel(lwt);
|
|
struct seg6_action_param *param;
|
|
unsigned long attrs;
|
|
int i, err;
|
|
|
|
if (nla_put_u32(skb, SEG6_LOCAL_ACTION, slwt->action))
|
|
return -EMSGSIZE;
|
|
|
|
attrs = slwt->desc->attrs | slwt->parsed_optattrs;
|
|
|
|
for (i = 0; i < SEG6_LOCAL_MAX + 1; i++) {
|
|
if (attrs & SEG6_F_ATTR(i)) {
|
|
param = &seg6_action_params[i];
|
|
err = param->put(skb, slwt);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int seg6_local_get_encap_size(struct lwtunnel_state *lwt)
|
|
{
|
|
struct seg6_local_lwt *slwt = seg6_local_lwtunnel(lwt);
|
|
unsigned long attrs;
|
|
int nlsize;
|
|
|
|
nlsize = nla_total_size(4); /* action */
|
|
|
|
attrs = slwt->desc->attrs | slwt->parsed_optattrs;
|
|
|
|
if (attrs & SEG6_F_ATTR(SEG6_LOCAL_SRH))
|
|
nlsize += nla_total_size((slwt->srh->hdrlen + 1) << 3);
|
|
|
|
if (attrs & SEG6_F_ATTR(SEG6_LOCAL_TABLE))
|
|
nlsize += nla_total_size(4);
|
|
|
|
if (attrs & SEG6_F_ATTR(SEG6_LOCAL_NH4))
|
|
nlsize += nla_total_size(4);
|
|
|
|
if (attrs & SEG6_F_ATTR(SEG6_LOCAL_NH6))
|
|
nlsize += nla_total_size(16);
|
|
|
|
if (attrs & SEG6_F_ATTR(SEG6_LOCAL_IIF))
|
|
nlsize += nla_total_size(4);
|
|
|
|
if (attrs & SEG6_F_ATTR(SEG6_LOCAL_OIF))
|
|
nlsize += nla_total_size(4);
|
|
|
|
if (attrs & SEG6_F_ATTR(SEG6_LOCAL_BPF))
|
|
nlsize += nla_total_size(sizeof(struct nlattr)) +
|
|
nla_total_size(MAX_PROG_NAME) +
|
|
nla_total_size(4);
|
|
|
|
if (attrs & SEG6_F_ATTR(SEG6_LOCAL_VRFTABLE))
|
|
nlsize += nla_total_size(4);
|
|
|
|
if (attrs & SEG6_F_LOCAL_COUNTERS)
|
|
nlsize += nla_total_size(0) + /* nest SEG6_LOCAL_COUNTERS */
|
|
/* SEG6_LOCAL_CNT_PACKETS */
|
|
nla_total_size_64bit(sizeof(__u64)) +
|
|
/* SEG6_LOCAL_CNT_BYTES */
|
|
nla_total_size_64bit(sizeof(__u64)) +
|
|
/* SEG6_LOCAL_CNT_ERRORS */
|
|
nla_total_size_64bit(sizeof(__u64));
|
|
|
|
return nlsize;
|
|
}
|
|
|
|
static int seg6_local_cmp_encap(struct lwtunnel_state *a,
|
|
struct lwtunnel_state *b)
|
|
{
|
|
struct seg6_local_lwt *slwt_a, *slwt_b;
|
|
struct seg6_action_param *param;
|
|
unsigned long attrs_a, attrs_b;
|
|
int i;
|
|
|
|
slwt_a = seg6_local_lwtunnel(a);
|
|
slwt_b = seg6_local_lwtunnel(b);
|
|
|
|
if (slwt_a->action != slwt_b->action)
|
|
return 1;
|
|
|
|
attrs_a = slwt_a->desc->attrs | slwt_a->parsed_optattrs;
|
|
attrs_b = slwt_b->desc->attrs | slwt_b->parsed_optattrs;
|
|
|
|
if (attrs_a != attrs_b)
|
|
return 1;
|
|
|
|
for (i = 0; i < SEG6_LOCAL_MAX + 1; i++) {
|
|
if (attrs_a & SEG6_F_ATTR(i)) {
|
|
param = &seg6_action_params[i];
|
|
if (param->cmp(slwt_a, slwt_b))
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct lwtunnel_encap_ops seg6_local_ops = {
|
|
.build_state = seg6_local_build_state,
|
|
.destroy_state = seg6_local_destroy_state,
|
|
.input = seg6_local_input,
|
|
.fill_encap = seg6_local_fill_encap,
|
|
.get_encap_size = seg6_local_get_encap_size,
|
|
.cmp_encap = seg6_local_cmp_encap,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
int __init seg6_local_init(void)
|
|
{
|
|
/* If the max total number of defined attributes is reached, then your
|
|
* kernel build stops here.
|
|
*
|
|
* This check is required to avoid arithmetic overflows when processing
|
|
* behavior attributes and the maximum number of defined attributes
|
|
* exceeds the allowed value.
|
|
*/
|
|
BUILD_BUG_ON(SEG6_LOCAL_MAX + 1 > BITS_PER_TYPE(unsigned long));
|
|
|
|
return lwtunnel_encap_add_ops(&seg6_local_ops,
|
|
LWTUNNEL_ENCAP_SEG6_LOCAL);
|
|
}
|
|
|
|
void seg6_local_exit(void)
|
|
{
|
|
lwtunnel_encap_del_ops(&seg6_local_ops, LWTUNNEL_ENCAP_SEG6_LOCAL);
|
|
}
|