leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c69b90920a
linux/drivers/net/benet/be_hw.h
Sathya Perla fe6d2a38b2 be2net: adding support for Lancer family of CNAs 
Key changes are:
- EQ ids are not assigned consecutively in Lancer. So, fix mapping of MSIx
  vector to EQ-id.
- BAR mapping and some req locations different for Lancer.
- TCP,UDP,IP checksum fields must be compulsorily set in TX wrb for TSO in
  Lancer.
- CEV_IST reg not present in Lancer; so, peek into event queue to check for
  new entries
- cq_create and mcc_create cmd interface is different for Lancer; handle
  accordingly

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27 17:43:20 -08:00

406 lines
11 KiB
C
Raw Blame History

/*
* Copyright (C) 2005 - 2010 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation. The full GNU General
* Public License is included in this distribution in the file called COPYING.
*
* Contact Information:
* linux-drivers@serverengines.com
*
* ServerEngines
* 209 N. Fair Oaks Ave
* Sunnyvale, CA 94085
*/
/********* Mailbox door bell *************/
/* Used for driver communication with the FW.
* The software must write this register twice to post any command. First,
* it writes the register with hi=1 and the upper bits of the physical address
* for the MAILBOX structure. Software must poll the ready bit until this
* is acknowledged. Then, sotware writes the register with hi=0 with the lower
* bits in the address. It must poll the ready bit until the command is
* complete. Upon completion, the MAILBOX will contain a valid completion
* queue entry.
*/
#define MPU_MAILBOX_DB_OFFSET 0x160
#define MPU_MAILBOX_DB_RDY_MASK 0x1 /* bit 0 */
#define MPU_MAILBOX_DB_HI_MASK 0x2 /* bit 1 */
#define MPU_EP_CONTROL 0
/********** MPU semphore ******************/
#define MPU_EP_SEMAPHORE_OFFSET 0xac
#define MPU_EP_SEMAPHORE_IF_TYPE2_OFFSET 0x400
#define EP_SEMAPHORE_POST_STAGE_MASK 0x0000FFFF
#define EP_SEMAPHORE_POST_ERR_MASK 0x1
#define EP_SEMAPHORE_POST_ERR_SHIFT 31
/* MPU semphore POST stage values */
#define POST_STAGE_AWAITING_HOST_RDY 0x1 /* FW awaiting goahead from host */
#define POST_STAGE_HOST_RDY 0x2 /* Host has given go-ahed to FW */
#define POST_STAGE_BE_RESET 0x3 /* Host wants to reset chip */
#define POST_STAGE_ARMFW_RDY 0xc000 /* FW is done with POST */
/********* Memory BAR register ************/
#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 0xfc
/* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt
* Disable" may still globally block interrupts in addition to individual
* interrupt masks; a mechanism for the device driver to block all interrupts
* atomically without having to arbitrate for the PCI Interrupt Disable bit
* with the OS.
*/
#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */
/********* Power management (WOL) **********/
#define PCICFG_PM_CONTROL_OFFSET 0x44
#define PCICFG_PM_CONTROL_MASK 0x108 /* bits 3 & 8 */
/********* Online Control Registers *******/
#define PCICFG_ONLINE0 0xB0
#define PCICFG_ONLINE1 0xB4
/********* UE Status and Mask Registers ***/
#define PCICFG_UE_STATUS_LOW 0xA0
#define PCICFG_UE_STATUS_HIGH 0xA4
#define PCICFG_UE_STATUS_LOW_MASK 0xA8
#define PCICFG_UE_STATUS_HI_MASK 0xAC
/******** SLI_INTF ***********************/
#define SLI_INTF_REG_OFFSET 0x58
#define SLI_INTF_VALID_MASK 0xE0000000
#define SLI_INTF_VALID 0xC0000000
#define SLI_INTF_HINT2_MASK 0x1F000000
#define SLI_INTF_HINT2_SHIFT 24
#define SLI_INTF_HINT1_MASK 0x00FF0000
#define SLI_INTF_HINT1_SHIFT 16
#define SLI_INTF_FAMILY_MASK 0x00000F00
#define SLI_INTF_FAMILY_SHIFT 8
#define SLI_INTF_IF_TYPE_MASK 0x0000F000
#define SLI_INTF_IF_TYPE_SHIFT 12
#define SLI_INTF_REV_MASK 0x000000F0
#define SLI_INTF_REV_SHIFT 4
#define SLI_INTF_FT_MASK 0x00000001
/* SLI family */
#define BE_SLI_FAMILY 0x0
#define LANCER_A0_SLI_FAMILY 0xA
/********* ISR0 Register offset **********/
#define CEV_ISR0_OFFSET 0xC18
#define CEV_ISR_SIZE 4
/********* Event Q door bell *************/
#define DB_EQ_OFFSET DB_CQ_OFFSET
#define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */
#define DB_EQ_RING_ID_EXT_MASK 0x3e00 /* bits 9-13 */
#define DB_EQ_RING_ID_EXT_MASK_SHIFT (2) /* qid bits 9-13 placing at 11-15 */
/* Clear the interrupt for this eq */
#define DB_EQ_CLR_SHIFT (9) /* bit 9 */
/* Must be 1 */
#define DB_EQ_EVNT_SHIFT (10) /* bit 10 */
/* Number of event entries processed */
#define DB_EQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
/* Rearm bit */
#define DB_EQ_REARM_SHIFT (29) /* bit 29 */
/********* Compl Q door bell *************/
#define DB_CQ_OFFSET 0x120
#define DB_CQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */
#define DB_CQ_RING_ID_EXT_MASK 0x7C00 /* bits 10-14 */
#define DB_CQ_RING_ID_EXT_MASK_SHIFT (1) /* qid bits 10-14
placing at 11-15 */
/* Number of event entries processed */
#define DB_CQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
/* Rearm bit */
#define DB_CQ_REARM_SHIFT (29) /* bit 29 */
/********** TX ULP door bell *************/
#define DB_TXULP1_OFFSET 0x60
#define DB_TXULP_RING_ID_MASK 0x7FF /* bits 0 - 10 */
/* Number of tx entries posted */
#define DB_TXULP_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */
#define DB_TXULP_NUM_POSTED_MASK 0x3FFF /* bits 16 - 29 */
/********** RQ(erx) door bell ************/
#define DB_RQ_OFFSET 0x100
#define DB_RQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */
/* Number of rx frags posted */
#define DB_RQ_NUM_POSTED_SHIFT (24) /* bits 24 - 31 */
/********** MCC door bell ************/
#define DB_MCCQ_OFFSET 0x140
#define DB_MCCQ_RING_ID_MASK 0x7FF /* bits 0 - 10 */
/* Number of entries posted */
#define DB_MCCQ_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */
/********** SRIOV VF PCICFG OFFSET ********/
#define SRIOV_VF_PCICFG_OFFSET (4096)
/* Flashrom related descriptors */
#define IMAGE_TYPE_FIRMWARE 160
#define IMAGE_TYPE_BOOTCODE 224
#define IMAGE_TYPE_OPTIONROM 32
#define NUM_FLASHDIR_ENTRIES 32
#define IMG_TYPE_ISCSI_ACTIVE 0
#define IMG_TYPE_REDBOOT 1
#define IMG_TYPE_BIOS 2
#define IMG_TYPE_PXE_BIOS 3
#define IMG_TYPE_FCOE_BIOS 8
#define IMG_TYPE_ISCSI_BACKUP 9
#define IMG_TYPE_FCOE_FW_ACTIVE 10
#define IMG_TYPE_FCOE_FW_BACKUP 11
#define IMG_TYPE_NCSI_FW 13
#define FLASHROM_OPER_FLASH 1
#define FLASHROM_OPER_SAVE 2
#define FLASHROM_OPER_REPORT 4
#define FLASH_IMAGE_MAX_SIZE_g2 (1310720) /* Max firmware image sz */
#define FLASH_BIOS_IMAGE_MAX_SIZE_g2 (262144) /* Max OPTION ROM img sz */
#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g2 (262144) /* Max Redboot image sz */
#define FLASH_IMAGE_MAX_SIZE_g3 (2097152) /* Max fw image size */
#define FLASH_BIOS_IMAGE_MAX_SIZE_g3 (524288) /* Max OPTION ROM img sz */
#define FLASH_REDBOOT_IMAGE_MAX_SIZE_g3 (1048576) /* Max Redboot image sz */
#define FLASH_NCSI_IMAGE_MAX_SIZE_g3 (262144) /* Max NSCI image sz */
#define FLASH_NCSI_MAGIC (0x16032009)
#define FLASH_NCSI_DISABLED (0)
#define FLASH_NCSI_ENABLED (1)
#define FLASH_NCSI_BITFILE_HDR_OFFSET (0x600000)
/* Offsets for components on Flash. */
#define FLASH_iSCSI_PRIMARY_IMAGE_START_g2 (1048576)
#define FLASH_iSCSI_BACKUP_IMAGE_START_g2 (2359296)
#define FLASH_FCoE_PRIMARY_IMAGE_START_g2 (3670016)
#define FLASH_FCoE_BACKUP_IMAGE_START_g2 (4980736)
#define FLASH_iSCSI_BIOS_START_g2 (7340032)
#define FLASH_PXE_BIOS_START_g2 (7864320)
#define FLASH_FCoE_BIOS_START_g2 (524288)
#define FLASH_REDBOOT_START_g2 (0)
#define FLASH_NCSI_START_g3 (15990784)
#define FLASH_iSCSI_PRIMARY_IMAGE_START_g3 (2097152)
#define FLASH_iSCSI_BACKUP_IMAGE_START_g3 (4194304)
#define FLASH_FCoE_PRIMARY_IMAGE_START_g3 (6291456)
#define FLASH_FCoE_BACKUP_IMAGE_START_g3 (8388608)
#define FLASH_iSCSI_BIOS_START_g3 (12582912)
#define FLASH_PXE_BIOS_START_g3 (13107200)
#define FLASH_FCoE_BIOS_START_g3 (13631488)
#define FLASH_REDBOOT_START_g3 (262144)
/************* Rx Packet Type Encoding **************/
#define BE_UNICAST_PACKET 0
#define BE_MULTICAST_PACKET 1
#define BE_BROADCAST_PACKET 2
#define BE_RSVD_PACKET 3
/*
* BE descriptors: host memory data structures whose formats
* are hardwired in BE silicon.
*/
/* Event Queue Descriptor */
#define EQ_ENTRY_VALID_MASK 0x1 /* bit 0 */
#define EQ_ENTRY_RES_ID_MASK 0xFFFF /* bits 16 - 31 */
#define EQ_ENTRY_RES_ID_SHIFT 16
struct be_eq_entry {
u32 evt;
};
/* TX Queue Descriptor */
#define ETH_WRB_FRAG_LEN_MASK 0xFFFF
struct be_eth_wrb {
u32 frag_pa_hi; /* dword 0 */
u32 frag_pa_lo; /* dword 1 */
u32 rsvd0; /* dword 2 */
u32 frag_len; /* dword 3: bits 0 - 15 */
} __packed;
/* Pseudo amap definition for eth_hdr_wrb in which each bit of the
* actual structure is defined as a byte : used to calculate
* offset/shift/mask of each field */
struct amap_eth_hdr_wrb {
u8 rsvd0[32]; /* dword 0 */
u8 rsvd1[32]; /* dword 1 */
u8 complete; /* dword 2 */
u8 event;
u8 crc;
u8 forward;
u8 lso6;
u8 mgmt;
u8 ipcs;
u8 udpcs;
u8 tcpcs;
u8 lso;
u8 vlan;
u8 gso[2];
u8 num_wrb[5];
u8 lso_mss[14];
u8 len[16]; /* dword 3 */
u8 vlan_tag[16];
} __packed;
struct be_eth_hdr_wrb {
u32 dw[4];
};
/* TX Compl Queue Descriptor */
/* Pseudo amap definition for eth_tx_compl in which each bit of the
* actual structure is defined as a byte: used to calculate
* offset/shift/mask of each field */
struct amap_eth_tx_compl {
u8 wrb_index[16]; /* dword 0 */
u8 ct[2]; /* dword 0 */
u8 port[2]; /* dword 0 */
u8 rsvd0[8]; /* dword 0 */
u8 status[4]; /* dword 0 */
u8 user_bytes[16]; /* dword 1 */
u8 nwh_bytes[8]; /* dword 1 */
u8 lso; /* dword 1 */
u8 cast_enc[2]; /* dword 1 */
u8 rsvd1[5]; /* dword 1 */
u8 rsvd2[32]; /* dword 2 */
u8 pkts[16]; /* dword 3 */
u8 ringid[11]; /* dword 3 */
u8 hash_val[4]; /* dword 3 */
u8 valid; /* dword 3 */
} __packed;
struct be_eth_tx_compl {
u32 dw[4];
};
/* RX Queue Descriptor */
struct be_eth_rx_d {
u32 fragpa_hi;
u32 fragpa_lo;
};
/* RX Compl Queue Descriptor */
/* Pseudo amap definition for eth_rx_compl in which each bit of the
* actual structure is defined as a byte: used to calculate
* offset/shift/mask of each field */
struct amap_eth_rx_compl {
u8 vlan_tag[16]; /* dword 0 */
u8 pktsize[14]; /* dword 0 */
u8 port; /* dword 0 */
u8 ip_opt; /* dword 0 */
u8 err; /* dword 1 */
u8 rsshp; /* dword 1 */
u8 ipf; /* dword 1 */
u8 tcpf; /* dword 1 */
u8 udpf; /* dword 1 */
u8 ipcksm; /* dword 1 */
u8 l4_cksm; /* dword 1 */
u8 ip_version; /* dword 1 */
u8 macdst[6]; /* dword 1 */
u8 vtp; /* dword 1 */
u8 rsvd0; /* dword 1 */
u8 fragndx[10]; /* dword 1 */
u8 ct[2]; /* dword 1 */
u8 sw; /* dword 1 */
u8 numfrags[3]; /* dword 1 */
u8 rss_flush; /* dword 2 */
u8 cast_enc[2]; /* dword 2 */
u8 vtm; /* dword 2 */
u8 rss_bank; /* dword 2 */
u8 rsvd1[23]; /* dword 2 */
u8 lro_pkt; /* dword 2 */
u8 rsvd2[2]; /* dword 2 */
u8 valid; /* dword 2 */
u8 rsshash[32]; /* dword 3 */
} __packed;
struct be_eth_rx_compl {
u32 dw[4];
};
struct controller_id {
u32 vendor;
u32 device;
u32 subvendor;
u32 subdevice;
};
struct flash_comp {
unsigned long offset;
int optype;
int size;
};
struct image_hdr {
u32 imageid;
u32 imageoffset;
u32 imagelength;
u32 image_checksum;
u8 image_version[32];
};
struct flash_file_hdr_g2 {
u8 sign[32];
u32 cksum;
u32 antidote;
struct controller_id cont_id;
u32 file_len;
u32 chunk_num;
u32 total_chunks;
u32 num_imgs;
u8 build[24];
};
struct flash_file_hdr_g3 {
u8 sign[52];
u8 ufi_version[4];
u32 file_len;
u32 cksum;
u32 antidote;
u32 num_imgs;
u8 build[24];
u8 rsvd[32];
};
struct flash_section_hdr {
u32 format_rev;
u32 cksum;
u32 antidote;
u32 build_no;
u8 id_string[64];
u32 active_entry_mask;
u32 valid_entry_mask;
u32 org_content_mask;
u32 rsvd0;
u32 rsvd1;
u32 rsvd2;
u32 rsvd3;
u32 rsvd4;
};
struct flash_section_entry {
u32 type;
u32 offset;
u32 pad_size;
u32 image_size;
u32 cksum;
u32 entry_point;
u32 rsvd0;
u32 rsvd1;
u8 ver_data[32];
};
struct flash_section_info {
u8 cookie[32];
struct flash_section_hdr fsec_hdr;
struct flash_section_entry fsec_entry[32];
};
Reference in New Issue View Git Blame Copy Permalink