forked from Minki/linux
304ea74770
Shawn Guo <shawn.guo@linaro.org> writes: I chose to base it on Sascha's imx-common-clk series than -rc, because otherwise it will keep patching clock file that has been removed by imx-common-clk series. It also depends on imx-pinctrl pull-request I just sent to be functional. Note: when imx-common-clk and imx-pinctrl get merged together, the following files will have conflicts. But the conflicts should not be so hard to resolve. [arnd: resolved those merge conflicts by pulling pinctrl branch] * imx/dt: (24 commits) ARM: dts: imx53-qsb: enable audio support ARM: dts: imx51-babbage: enable audio support ARM: imx: add audio codec clk lookup for imx53-qsb ARM: imx: add audmux pad setting for imx51-babbage ARM: imx: add more imx5 ssi clocks ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support ARM: dts: imx6q-sabrelite: add serial2 pinctrl support ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000 ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000 ARM: imx6q: add ssi1_ipg clk_lookup ARM: dts: imx6q-sabrelite: add audmux pinctrl support ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support ARM: dts: imx6q-sabrelite: add audmux device ARM: dts: imx6q-sabrelite: add ssi device ARM: dts: imx6q-arm2: add pinctrl state for usdhc ARM: imx6: Add UART2 for low-level debug ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function ARM: dts: imx6q-sabrelite: Add SPI NOR support ARM: dts: Add basic support for imx6q-sabresd ... Pulls in imx/pinctrl and imx/clock as dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
65 lines
1.7 KiB
Plaintext
65 lines
1.7 KiB
Plaintext
Freescale i.MX Platforms Device Tree Bindings
|
|
-----------------------------------------------
|
|
|
|
i.MX23 Evaluation Kit
|
|
Required root node properties:
|
|
- compatible = "fsl,imx23-evk", "fsl,imx23";
|
|
|
|
i.MX28 Evaluation Kit
|
|
Required root node properties:
|
|
- compatible = "fsl,imx28-evk", "fsl,imx28";
|
|
|
|
i.MX51 Babbage Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx51-babbage", "fsl,imx51";
|
|
|
|
i.MX53 Automotive Reference Design Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53-ard", "fsl,imx53";
|
|
|
|
i.MX53 Evaluation Kit
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53-evk", "fsl,imx53";
|
|
|
|
i.MX53 Quick Start Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53-qsb", "fsl,imx53";
|
|
|
|
i.MX53 Smart Mobile Reference Design Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53-smd", "fsl,imx53";
|
|
|
|
i.MX6 Quad Armadillo2 Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx6q-arm2", "fsl,imx6q";
|
|
|
|
i.MX6 Quad SABRE Lite Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
|
|
|
|
i.MX6 Quad SABRE Smart Device Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
|
|
|
|
Generic i.MX boards
|
|
-------------------
|
|
|
|
No iomux setup is done for these boards, so this must have been configured
|
|
by the bootloader for boards to work with the generic bindings.
|
|
|
|
i.MX27 generic board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx27";
|
|
|
|
i.MX51 generic board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx51";
|
|
|
|
i.MX53 generic board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53";
|
|
|
|
i.MX6q generic board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx6q";
|