forked from Minki/linux
e9f3ed4ac4
Starting with commit 8947e396a8 ("Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor"
binding indicating support for JEDEC identification.
Use it for all flashes that are supposed to support READ ID op according
to the datasheets.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
414 lines
9.6 KiB
Plaintext
414 lines
9.6 KiB
Plaintext
/*
|
|
* Device Tree file for Marvell Armada 385 development board
|
|
* (RD-88F6820-GP)
|
|
*
|
|
* Copyright (C) 2014 Marvell
|
|
*
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "armada-388.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Marvell Armada 385 GP";
|
|
compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x80000000>; /* 2 GB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
|
|
|
|
internal-regs {
|
|
spi@10600 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
status = "okay";
|
|
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,m25p128", "jedec,spi-nor";
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <50000000>;
|
|
m25p,fast-read;
|
|
};
|
|
};
|
|
|
|
i2c@11000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
/*
|
|
* The EEPROM located at adresse 54 is needed
|
|
* for the boot - DO NOT ERASE IT -
|
|
*/
|
|
|
|
expander0: pca9555@20 {
|
|
compatible = "nxp,pca9555";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pca0_pins>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x20>;
|
|
};
|
|
|
|
expander1: pca9555@21 {
|
|
compatible = "nxp,pca9555";
|
|
pinctrl-names = "default";
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x21>;
|
|
};
|
|
|
|
};
|
|
|
|
serial@12000 {
|
|
/*
|
|
* Exported on the micro USB connector CON16
|
|
* through an FTDI
|
|
*/
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* GE1 CON15 */
|
|
ethernet@30000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
/* CON4 */
|
|
usb@58000 {
|
|
vcc-supply = <®_usb2_0_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* GE0 CON1 */
|
|
ethernet@70000 {
|
|
pinctrl-names = "default";
|
|
/*
|
|
* The Reference Clock 0 is used to provide a
|
|
* clock to the PHY
|
|
*/
|
|
pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
|
|
mdio@72004 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
|
|
phy0: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
phy1: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
sata@a8000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sata0: sata-port@0 {
|
|
reg = <0>;
|
|
target-supply = <®_5v_sata0>;
|
|
};
|
|
|
|
sata1: sata-port@1 {
|
|
reg = <1>;
|
|
target-supply = <®_5v_sata1>;
|
|
};
|
|
};
|
|
|
|
sata@e0000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sata2: sata-port@0 {
|
|
reg = <0>;
|
|
target-supply = <®_5v_sata2>;
|
|
};
|
|
|
|
sata3: sata-port@1 {
|
|
reg = <1>;
|
|
target-supply = <®_5v_sata3>;
|
|
};
|
|
};
|
|
|
|
sdhci@d8000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhci_pins>;
|
|
cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
|
|
no-1-8-v;
|
|
wp-inverted;
|
|
bus-width = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* CON5 */
|
|
usb3@f0000 {
|
|
vcc-supply = <®_usb2_1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* CON7 */
|
|
usb3@f8000 {
|
|
vcc-supply = <®_usb3_vbus>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pcie-controller {
|
|
status = "okay";
|
|
/*
|
|
* One PCIe units is accessible through
|
|
* standard PCIe slot on the board.
|
|
*/
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* The two other PCIe units are accessible
|
|
* through mini PCIe slot on the board.
|
|
*/
|
|
pcie@2,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
pcie@3,0 {
|
|
/* Port 2, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
gpio-fan {
|
|
compatible = "gpio-fan";
|
|
gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
|
|
gpio-fan,speed-map = < 0 0
|
|
3000 1>;
|
|
};
|
|
};
|
|
|
|
reg_usb3_vbus: usb3-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb3-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_usb2_0_vbus: v5-vbus0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-vbus0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_usb2_1_vbus: v5-vbus1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-vbus1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_usb2_1_vbus: v5-vbus1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-vbus1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_sata0: pwr-sata0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pwr_en_sata0";
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
reg_5v_sata0: v5-sata0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata0>;
|
|
};
|
|
|
|
reg_12v_sata0: v12-sata0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata0";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata0>;
|
|
};
|
|
|
|
reg_sata1: pwr-sata1 {
|
|
regulator-name = "pwr_en_sata1";
|
|
compatible = "regulator-fixed";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_5v_sata1: v5-sata1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata1>;
|
|
};
|
|
|
|
reg_12v_sata1: v12-sata1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata1";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata1>;
|
|
};
|
|
|
|
reg_sata2: pwr-sata2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pwr_en_sata2";
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_5v_sata2: v5-sata2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata2";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata2>;
|
|
};
|
|
|
|
reg_12v_sata2: v12-sata2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata2";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata2>;
|
|
};
|
|
|
|
reg_sata3: pwr-sata3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pwr_en_sata3";
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_5v_sata3: v5-sata3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v5.0-sata3";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata3>;
|
|
};
|
|
|
|
reg_12v_sata3: v12-sata3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v12.0-sata3";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-always-on;
|
|
vin-supply = <®_sata3>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pca0_pins: pca0_pins {
|
|
marvell,pins = "mpp18";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|