linux/drivers/crypto/nx/nx-842-powernv.c
Haren Myneni b0d6c9bab5 crypto/nx: Add P9 NX support for 842 compression engine
This patch adds P9 NX support for 842 compression engine. Virtual
Accelerator Switchboard (VAS) is used to access 842 engine on P9.

For each NX engine per chip, setup receive window using
vas_rx_win_open() which configures RxFIFo with FIFO address, lpid,
pid and tid values. This unique (lpid, pid, tid) combination will
be used to identify the target engine.

For crypto open request, open send window on the NX engine for
the corresponding chip / cpu where the open request is executed.
This send window will be closed upon crypto close request.

NX provides high and normal priority FIFOs. For compression /
decompression requests, we use only hight priority FIFOs in kernel.

Each NX request will be communicated to VAS using copy/paste
instructions with vas_copy_crb() / vas_paste_crb() functions.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01 16:42:51 +10:00

1069 lines
28 KiB
C

/*
* Driver for IBM PowerNV 842 compression accelerator
*
* Copyright (C) 2015 Dan Streetman, IBM Corp
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "nx-842.h"
#include <linux/timer.h>
#include <asm/prom.h>
#include <asm/icswx.h>
#include <asm/vas.h>
#include <asm/reg.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>");
MODULE_DESCRIPTION("842 H/W Compression driver for IBM PowerNV processors");
MODULE_ALIAS_CRYPTO("842");
MODULE_ALIAS_CRYPTO("842-nx");
#define WORKMEM_ALIGN (CRB_ALIGN)
#define CSB_WAIT_MAX (5000) /* ms */
#define VAS_RETRIES (10)
/* # of requests allowed per RxFIFO at a time. 0 for unlimited */
#define MAX_CREDITS_PER_RXFIFO (1024)
struct nx842_workmem {
/* Below fields must be properly aligned */
struct coprocessor_request_block crb; /* CRB_ALIGN align */
struct data_descriptor_entry ddl_in[DDL_LEN_MAX]; /* DDE_ALIGN align */
struct data_descriptor_entry ddl_out[DDL_LEN_MAX]; /* DDE_ALIGN align */
/* Above fields must be properly aligned */
ktime_t start;
struct vas_window *txwin; /* Used with VAS function */
char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */
} __packed __aligned(WORKMEM_ALIGN);
struct nx842_coproc {
unsigned int chip_id;
unsigned int ct;
unsigned int ci; /* Coprocessor instance, used with icswx */
struct {
struct vas_window *rxwin;
int id;
} vas;
struct list_head list;
};
/*
* Send the request to NX engine on the chip for the corresponding CPU
* where the process is executing. Use with VAS function.
*/
static DEFINE_PER_CPU(struct nx842_coproc *, coproc_inst);
/* no cpu hotplug on powernv, so this list never changes after init */
static LIST_HEAD(nx842_coprocs);
static unsigned int nx842_ct; /* used in icswx function */
static int (*nx842_powernv_exec)(const unsigned char *in,
unsigned int inlen, unsigned char *out,
unsigned int *outlenp, void *workmem, int fc);
/**
* setup_indirect_dde - Setup an indirect DDE
*
* The DDE is setup with the the DDE count, byte count, and address of
* first direct DDE in the list.
*/
static void setup_indirect_dde(struct data_descriptor_entry *dde,
struct data_descriptor_entry *ddl,
unsigned int dde_count, unsigned int byte_count)
{
dde->flags = 0;
dde->count = dde_count;
dde->index = 0;
dde->length = cpu_to_be32(byte_count);
dde->address = cpu_to_be64(nx842_get_pa(ddl));
}
/**
* setup_direct_dde - Setup single DDE from buffer
*
* The DDE is setup with the buffer and length. The buffer must be properly
* aligned. The used length is returned.
* Returns:
* N Successfully set up DDE with N bytes
*/
static unsigned int setup_direct_dde(struct data_descriptor_entry *dde,
unsigned long pa, unsigned int len)
{
unsigned int l = min_t(unsigned int, len, LEN_ON_PAGE(pa));
dde->flags = 0;
dde->count = 0;
dde->index = 0;
dde->length = cpu_to_be32(l);
dde->address = cpu_to_be64(pa);
return l;
}
/**
* setup_ddl - Setup DDL from buffer
*
* Returns:
* 0 Successfully set up DDL
*/
static int setup_ddl(struct data_descriptor_entry *dde,
struct data_descriptor_entry *ddl,
unsigned char *buf, unsigned int len,
bool in)
{
unsigned long pa = nx842_get_pa(buf);
int i, ret, total_len = len;
if (!IS_ALIGNED(pa, DDE_BUFFER_ALIGN)) {
pr_debug("%s buffer pa 0x%lx not 0x%x-byte aligned\n",
in ? "input" : "output", pa, DDE_BUFFER_ALIGN);
return -EINVAL;
}
/* only need to check last mult; since buffer must be
* DDE_BUFFER_ALIGN aligned, and that is a multiple of
* DDE_BUFFER_SIZE_MULT, and pre-last page DDE buffers
* are guaranteed a multiple of DDE_BUFFER_SIZE_MULT.
*/
if (len % DDE_BUFFER_LAST_MULT) {
pr_debug("%s buffer len 0x%x not a multiple of 0x%x\n",
in ? "input" : "output", len, DDE_BUFFER_LAST_MULT);
if (in)
return -EINVAL;
len = round_down(len, DDE_BUFFER_LAST_MULT);
}
/* use a single direct DDE */
if (len <= LEN_ON_PAGE(pa)) {
ret = setup_direct_dde(dde, pa, len);
WARN_ON(ret < len);
return 0;
}
/* use the DDL */
for (i = 0; i < DDL_LEN_MAX && len > 0; i++) {
ret = setup_direct_dde(&ddl[i], pa, len);
buf += ret;
len -= ret;
pa = nx842_get_pa(buf);
}
if (len > 0) {
pr_debug("0x%x total %s bytes 0x%x too many for DDL.\n",
total_len, in ? "input" : "output", len);
if (in)
return -EMSGSIZE;
total_len -= len;
}
setup_indirect_dde(dde, ddl, i, total_len);
return 0;
}
#define CSB_ERR(csb, msg, ...) \
pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n", \
##__VA_ARGS__, (csb)->flags, \
(csb)->cs, (csb)->cc, (csb)->ce, \
be32_to_cpu((csb)->count))
#define CSB_ERR_ADDR(csb, msg, ...) \
CSB_ERR(csb, msg " at %lx", ##__VA_ARGS__, \
(unsigned long)be64_to_cpu((csb)->address))
/**
* wait_for_csb
*/
static int wait_for_csb(struct nx842_workmem *wmem,
struct coprocessor_status_block *csb)
{
ktime_t start = wmem->start, now = ktime_get();
ktime_t timeout = ktime_add_ms(start, CSB_WAIT_MAX);
while (!(ACCESS_ONCE(csb->flags) & CSB_V)) {
cpu_relax();
now = ktime_get();
if (ktime_after(now, timeout))
break;
}
/* hw has updated csb and output buffer */
barrier();
/* check CSB flags */
if (!(csb->flags & CSB_V)) {
CSB_ERR(csb, "CSB still not valid after %ld us, giving up",
(long)ktime_us_delta(now, start));
return -ETIMEDOUT;
}
if (csb->flags & CSB_F) {
CSB_ERR(csb, "Invalid CSB format");
return -EPROTO;
}
if (csb->flags & CSB_CH) {
CSB_ERR(csb, "Invalid CSB chaining state");
return -EPROTO;
}
/* verify CSB completion sequence is 0 */
if (csb->cs) {
CSB_ERR(csb, "Invalid CSB completion sequence");
return -EPROTO;
}
/* check CSB Completion Code */
switch (csb->cc) {
/* no error */
case CSB_CC_SUCCESS:
break;
case CSB_CC_TPBC_GT_SPBC:
/* not an error, but the compressed data is
* larger than the uncompressed data :(
*/
break;
/* input data errors */
case CSB_CC_OPERAND_OVERLAP:
/* input and output buffers overlap */
CSB_ERR(csb, "Operand Overlap error");
return -EINVAL;
case CSB_CC_INVALID_OPERAND:
CSB_ERR(csb, "Invalid operand");
return -EINVAL;
case CSB_CC_NOSPC:
/* output buffer too small */
return -ENOSPC;
case CSB_CC_ABORT:
CSB_ERR(csb, "Function aborted");
return -EINTR;
case CSB_CC_CRC_MISMATCH:
CSB_ERR(csb, "CRC mismatch");
return -EINVAL;
case CSB_CC_TEMPL_INVALID:
CSB_ERR(csb, "Compressed data template invalid");
return -EINVAL;
case CSB_CC_TEMPL_OVERFLOW:
CSB_ERR(csb, "Compressed data template shows data past end");
return -EINVAL;
case CSB_CC_EXCEED_BYTE_COUNT: /* P9 or later */
/*
* DDE byte count exceeds the limit specified in Maximum
* byte count register.
*/
CSB_ERR(csb, "DDE byte count exceeds the limit");
return -EINVAL;
/* these should not happen */
case CSB_CC_INVALID_ALIGN:
/* setup_ddl should have detected this */
CSB_ERR_ADDR(csb, "Invalid alignment");
return -EINVAL;
case CSB_CC_DATA_LENGTH:
/* setup_ddl should have detected this */
CSB_ERR(csb, "Invalid data length");
return -EINVAL;
case CSB_CC_WR_TRANSLATION:
case CSB_CC_TRANSLATION:
case CSB_CC_TRANSLATION_DUP1:
case CSB_CC_TRANSLATION_DUP2:
case CSB_CC_TRANSLATION_DUP3:
case CSB_CC_TRANSLATION_DUP4:
case CSB_CC_TRANSLATION_DUP5:
case CSB_CC_TRANSLATION_DUP6:
/* should not happen, we use physical addrs */
CSB_ERR_ADDR(csb, "Translation error");
return -EPROTO;
case CSB_CC_WR_PROTECTION:
case CSB_CC_PROTECTION:
case CSB_CC_PROTECTION_DUP1:
case CSB_CC_PROTECTION_DUP2:
case CSB_CC_PROTECTION_DUP3:
case CSB_CC_PROTECTION_DUP4:
case CSB_CC_PROTECTION_DUP5:
case CSB_CC_PROTECTION_DUP6:
/* should not happen, we use physical addrs */
CSB_ERR_ADDR(csb, "Protection error");
return -EPROTO;
case CSB_CC_PRIVILEGE:
/* shouldn't happen, we're in HYP mode */
CSB_ERR(csb, "Insufficient Privilege error");
return -EPROTO;
case CSB_CC_EXCESSIVE_DDE:
/* shouldn't happen, setup_ddl doesn't use many dde's */
CSB_ERR(csb, "Too many DDEs in DDL");
return -EINVAL;
case CSB_CC_TRANSPORT:
case CSB_CC_INVALID_CRB: /* P9 or later */
/* shouldn't happen, we setup CRB correctly */
CSB_ERR(csb, "Invalid CRB");
return -EINVAL;
case CSB_CC_INVALID_DDE: /* P9 or later */
/*
* shouldn't happen, setup_direct/indirect_dde creates
* DDE right
*/
CSB_ERR(csb, "Invalid DDE");
return -EINVAL;
case CSB_CC_SEGMENTED_DDL:
/* shouldn't happen, setup_ddl creates DDL right */
CSB_ERR(csb, "Segmented DDL error");
return -EINVAL;
case CSB_CC_DDE_OVERFLOW:
/* shouldn't happen, setup_ddl creates DDL right */
CSB_ERR(csb, "DDE overflow error");
return -EINVAL;
case CSB_CC_SESSION:
/* should not happen with ICSWX */
CSB_ERR(csb, "Session violation error");
return -EPROTO;
case CSB_CC_CHAIN:
/* should not happen, we don't use chained CRBs */
CSB_ERR(csb, "Chained CRB error");
return -EPROTO;
case CSB_CC_SEQUENCE:
/* should not happen, we don't use chained CRBs */
CSB_ERR(csb, "CRB seqeunce number error");
return -EPROTO;
case CSB_CC_UNKNOWN_CODE:
CSB_ERR(csb, "Unknown subfunction code");
return -EPROTO;
/* hardware errors */
case CSB_CC_RD_EXTERNAL:
case CSB_CC_RD_EXTERNAL_DUP1:
case CSB_CC_RD_EXTERNAL_DUP2:
case CSB_CC_RD_EXTERNAL_DUP3:
CSB_ERR_ADDR(csb, "Read error outside coprocessor");
return -EPROTO;
case CSB_CC_WR_EXTERNAL:
CSB_ERR_ADDR(csb, "Write error outside coprocessor");
return -EPROTO;
case CSB_CC_INTERNAL:
CSB_ERR(csb, "Internal error in coprocessor");
return -EPROTO;
case CSB_CC_PROVISION:
CSB_ERR(csb, "Storage provision error");
return -EPROTO;
case CSB_CC_HW:
CSB_ERR(csb, "Correctable hardware error");
return -EPROTO;
case CSB_CC_HW_EXPIRED_TIMER: /* P9 or later */
CSB_ERR(csb, "Job did not finish within allowed time");
return -EPROTO;
default:
CSB_ERR(csb, "Invalid CC %d", csb->cc);
return -EPROTO;
}
/* check Completion Extension state */
if (csb->ce & CSB_CE_TERMINATION) {
CSB_ERR(csb, "CSB request was terminated");
return -EPROTO;
}
if (csb->ce & CSB_CE_INCOMPLETE) {
CSB_ERR(csb, "CSB request not complete");
return -EPROTO;
}
if (!(csb->ce & CSB_CE_TPBC)) {
CSB_ERR(csb, "TPBC not provided, unknown target length");
return -EPROTO;
}
/* successful completion */
pr_debug_ratelimited("Processed %u bytes in %lu us\n",
be32_to_cpu(csb->count),
(unsigned long)ktime_us_delta(now, start));
return 0;
}
static int nx842_config_crb(const unsigned char *in, unsigned int inlen,
unsigned char *out, unsigned int outlen,
struct nx842_workmem *wmem)
{
struct coprocessor_request_block *crb;
struct coprocessor_status_block *csb;
u64 csb_addr;
int ret;
crb = &wmem->crb;
csb = &crb->csb;
/* Clear any previous values */
memset(crb, 0, sizeof(*crb));
/* set up DDLs */
ret = setup_ddl(&crb->source, wmem->ddl_in,
(unsigned char *)in, inlen, true);
if (ret)
return ret;
ret = setup_ddl(&crb->target, wmem->ddl_out,
out, outlen, false);
if (ret)
return ret;
/* set up CRB's CSB addr */
csb_addr = nx842_get_pa(csb) & CRB_CSB_ADDRESS;
csb_addr |= CRB_CSB_AT; /* Addrs are phys */
crb->csb_addr = cpu_to_be64(csb_addr);
return 0;
}
/**
* nx842_exec_icswx - compress/decompress data using the 842 algorithm
*
* (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
* This compresses or decompresses the provided input buffer into the provided
* output buffer.
*
* Upon return from this function @outlen contains the length of the
* output data. If there is an error then @outlen will be 0 and an
* error will be specified by the return code from this function.
*
* The @workmem buffer should only be used by one function call at a time.
*
* @in: input buffer pointer
* @inlen: input buffer size
* @out: output buffer pointer
* @outlenp: output buffer size pointer
* @workmem: working memory buffer pointer, size determined by
* nx842_powernv_driver.workmem_size
* @fc: function code, see CCW Function Codes in nx-842.h
*
* Returns:
* 0 Success, output of length @outlenp stored in the buffer at @out
* -ENODEV Hardware unavailable
* -ENOSPC Output buffer is to small
* -EMSGSIZE Input buffer too large
* -EINVAL buffer constraints do not fix nx842_constraints
* -EPROTO hardware error during operation
* -ETIMEDOUT hardware did not complete operation in reasonable time
* -EINTR operation was aborted
*/
static int nx842_exec_icswx(const unsigned char *in, unsigned int inlen,
unsigned char *out, unsigned int *outlenp,
void *workmem, int fc)
{
struct coprocessor_request_block *crb;
struct coprocessor_status_block *csb;
struct nx842_workmem *wmem;
int ret;
u32 ccw;
unsigned int outlen = *outlenp;
wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
*outlenp = 0;
/* shoudn't happen, we don't load without a coproc */
if (!nx842_ct) {
pr_err_ratelimited("coprocessor CT is 0");
return -ENODEV;
}
ret = nx842_config_crb(in, inlen, out, outlen, wmem);
if (ret)
return ret;
crb = &wmem->crb;
csb = &crb->csb;
/* set up CCW */
ccw = 0;
ccw = SET_FIELD(CCW_CT, ccw, nx842_ct);
ccw = SET_FIELD(CCW_CI_842, ccw, 0); /* use 0 for hw auto-selection */
ccw = SET_FIELD(CCW_FC_842, ccw, fc);
wmem->start = ktime_get();
/* do ICSWX */
ret = icswx(cpu_to_be32(ccw), crb);
pr_debug_ratelimited("icswx CR %x ccw %x crb->ccw %x\n", ret,
(unsigned int)ccw,
(unsigned int)be32_to_cpu(crb->ccw));
/*
* NX842 coprocessor sets 3rd bit in CR register with XER[S0].
* XER[S0] is the integer summary overflow bit which is nothing
* to do NX. Since this bit can be set with other return values,
* mask this bit.
*/
ret &= ~ICSWX_XERS0;
switch (ret) {
case ICSWX_INITIATED:
ret = wait_for_csb(wmem, csb);
break;
case ICSWX_BUSY:
pr_debug_ratelimited("842 Coprocessor busy\n");
ret = -EBUSY;
break;
case ICSWX_REJECTED:
pr_err_ratelimited("ICSWX rejected\n");
ret = -EPROTO;
break;
}
if (!ret)
*outlenp = be32_to_cpu(csb->count);
return ret;
}
/**
* nx842_exec_vas - compress/decompress data using the 842 algorithm
*
* (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
* This compresses or decompresses the provided input buffer into the provided
* output buffer.
*
* Upon return from this function @outlen contains the length of the
* output data. If there is an error then @outlen will be 0 and an
* error will be specified by the return code from this function.
*
* The @workmem buffer should only be used by one function call at a time.
*
* @in: input buffer pointer
* @inlen: input buffer size
* @out: output buffer pointer
* @outlenp: output buffer size pointer
* @workmem: working memory buffer pointer, size determined by
* nx842_powernv_driver.workmem_size
* @fc: function code, see CCW Function Codes in nx-842.h
*
* Returns:
* 0 Success, output of length @outlenp stored in the buffer
* at @out
* -ENODEV Hardware unavailable
* -ENOSPC Output buffer is to small
* -EMSGSIZE Input buffer too large
* -EINVAL buffer constraints do not fix nx842_constraints
* -EPROTO hardware error during operation
* -ETIMEDOUT hardware did not complete operation in reasonable time
* -EINTR operation was aborted
*/
static int nx842_exec_vas(const unsigned char *in, unsigned int inlen,
unsigned char *out, unsigned int *outlenp,
void *workmem, int fc)
{
struct coprocessor_request_block *crb;
struct coprocessor_status_block *csb;
struct nx842_workmem *wmem;
struct vas_window *txwin;
int ret, i = 0;
u32 ccw;
unsigned int outlen = *outlenp;
wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
*outlenp = 0;
crb = &wmem->crb;
csb = &crb->csb;
ret = nx842_config_crb(in, inlen, out, outlen, wmem);
if (ret)
return ret;
ccw = 0;
ccw = SET_FIELD(CCW_FC_842, ccw, fc);
crb->ccw = cpu_to_be32(ccw);
txwin = wmem->txwin;
/* shoudn't happen, we don't load without a coproc */
if (!txwin) {
pr_err_ratelimited("NX-842 coprocessor is not available");
return -ENODEV;
}
do {
wmem->start = ktime_get();
preempt_disable();
/*
* VAS copy CRB into L2 cache. Refer <asm/vas.h>.
* @crb and @offset.
*/
vas_copy_crb(crb, 0);
/*
* VAS paste previously copied CRB to NX.
* @txwin, @offset and @last (must be true).
*/
ret = vas_paste_crb(txwin, 0, 1);
preempt_enable();
/*
* Retry copy/paste function for VAS failures.
*/
} while (ret && (i++ < VAS_RETRIES));
if (ret) {
pr_err_ratelimited("VAS copy/paste failed\n");
return ret;
}
ret = wait_for_csb(wmem, csb);
if (!ret)
*outlenp = be32_to_cpu(csb->count);
return ret;
}
/**
* nx842_powernv_compress - Compress data using the 842 algorithm
*
* Compression provided by the NX842 coprocessor on IBM PowerNV systems.
* The input buffer is compressed and the result is stored in the
* provided output buffer.
*
* Upon return from this function @outlen contains the length of the
* compressed data. If there is an error then @outlen will be 0 and an
* error will be specified by the return code from this function.
*
* @in: input buffer pointer
* @inlen: input buffer size
* @out: output buffer pointer
* @outlenp: output buffer size pointer
* @workmem: working memory buffer pointer, size determined by
* nx842_powernv_driver.workmem_size
*
* Returns: see @nx842_powernv_exec()
*/
static int nx842_powernv_compress(const unsigned char *in, unsigned int inlen,
unsigned char *out, unsigned int *outlenp,
void *wmem)
{
return nx842_powernv_exec(in, inlen, out, outlenp,
wmem, CCW_FC_842_COMP_CRC);
}
/**
* nx842_powernv_decompress - Decompress data using the 842 algorithm
*
* Decompression provided by the NX842 coprocessor on IBM PowerNV systems.
* The input buffer is decompressed and the result is stored in the
* provided output buffer.
*
* Upon return from this function @outlen contains the length of the
* decompressed data. If there is an error then @outlen will be 0 and an
* error will be specified by the return code from this function.
*
* @in: input buffer pointer
* @inlen: input buffer size
* @out: output buffer pointer
* @outlenp: output buffer size pointer
* @workmem: working memory buffer pointer, size determined by
* nx842_powernv_driver.workmem_size
*
* Returns: see @nx842_powernv_exec()
*/
static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen,
unsigned char *out, unsigned int *outlenp,
void *wmem)
{
return nx842_powernv_exec(in, inlen, out, outlenp,
wmem, CCW_FC_842_DECOMP_CRC);
}
static inline void nx842_add_coprocs_list(struct nx842_coproc *coproc,
int chipid)
{
coproc->chip_id = chipid;
INIT_LIST_HEAD(&coproc->list);
list_add(&coproc->list, &nx842_coprocs);
}
/*
* Identify chip ID for each CPU and save coprocesor adddress for the
* corresponding NX engine in percpu coproc_inst.
* coproc_inst is used in crypto_init to open send window on the NX instance
* for the corresponding CPU / chip where the open request is executed.
*/
static void nx842_set_per_cpu_coproc(struct nx842_coproc *coproc)
{
unsigned int i, chip_id;
for_each_possible_cpu(i) {
chip_id = cpu_to_chip_id(i);
if (coproc->chip_id == chip_id)
per_cpu(coproc_inst, i) = coproc;
}
}
static struct vas_window *nx842_alloc_txwin(struct nx842_coproc *coproc)
{
struct vas_window *txwin = NULL;
struct vas_tx_win_attr txattr;
/*
* Kernel requests will be high priority. So open send
* windows only for high priority RxFIFO entries.
*/
vas_init_tx_win_attr(&txattr, coproc->ct);
txattr.lpid = 0; /* lpid is 0 for kernel requests */
txattr.pid = 0; /* pid is 0 for kernel requests */
/*
* Open a VAS send window which is used to send request to NX.
*/
txwin = vas_tx_win_open(coproc->vas.id, coproc->ct, &txattr);
if (IS_ERR(txwin)) {
pr_err("ibm,nx-842: Can not open TX window: %ld\n",
PTR_ERR(txwin));
return NULL;
}
return txwin;
}
static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
int vasid)
{
struct vas_window *rxwin = NULL;
struct vas_rx_win_attr rxattr;
struct nx842_coproc *coproc;
u32 lpid, pid, tid, fifo_size;
u64 rx_fifo;
const char *priority;
int ret;
ret = of_property_read_u64(dn, "rx-fifo-address", &rx_fifo);
if (ret) {
pr_err("Missing rx-fifo-address property\n");
return ret;
}
ret = of_property_read_u32(dn, "rx-fifo-size", &fifo_size);
if (ret) {
pr_err("Missing rx-fifo-size property\n");
return ret;
}
ret = of_property_read_u32(dn, "lpid", &lpid);
if (ret) {
pr_err("Missing lpid property\n");
return ret;
}
ret = of_property_read_u32(dn, "pid", &pid);
if (ret) {
pr_err("Missing pid property\n");
return ret;
}
ret = of_property_read_u32(dn, "tid", &tid);
if (ret) {
pr_err("Missing tid property\n");
return ret;
}
ret = of_property_read_string(dn, "priority", &priority);
if (ret) {
pr_err("Missing priority property\n");
return ret;
}
coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
if (!coproc)
return -ENOMEM;
if (!strcmp(priority, "High"))
coproc->ct = VAS_COP_TYPE_842_HIPRI;
else if (!strcmp(priority, "Normal"))
coproc->ct = VAS_COP_TYPE_842;
else {
pr_err("Invalid RxFIFO priority value\n");
ret = -EINVAL;
goto err_out;
}
vas_init_rx_win_attr(&rxattr, coproc->ct);
rxattr.rx_fifo = (void *)rx_fifo;
rxattr.rx_fifo_size = fifo_size;
rxattr.lnotify_lpid = lpid;
rxattr.lnotify_pid = pid;
rxattr.lnotify_tid = tid;
rxattr.wcreds_max = MAX_CREDITS_PER_RXFIFO;
/*
* Open a VAS receice window which is used to configure RxFIFO
* for NX.
*/
rxwin = vas_rx_win_open(vasid, coproc->ct, &rxattr);
if (IS_ERR(rxwin)) {
ret = PTR_ERR(rxwin);
pr_err("setting RxFIFO with VAS failed: %d\n",
ret);
goto err_out;
}
coproc->vas.rxwin = rxwin;
coproc->vas.id = vasid;
nx842_add_coprocs_list(coproc, chip_id);
/*
* Kernel requests use only high priority FIFOs. So save coproc
* info in percpu coproc_inst which will be used to open send
* windows for crypto open requests later.
*/
if (coproc->ct == VAS_COP_TYPE_842_HIPRI)
nx842_set_per_cpu_coproc(coproc);
return 0;
err_out:
kfree(coproc);
return ret;
}
static int __init nx842_powernv_probe_vas(struct device_node *pn)
{
struct device_node *dn;
int chip_id, vasid, ret = 0;
int nx_fifo_found = 0;
chip_id = of_get_ibm_chip_id(pn);
if (chip_id < 0) {
pr_err("ibm,chip-id missing\n");
return -EINVAL;
}
for_each_compatible_node(dn, NULL, "ibm,power9-vas-x") {
if (of_get_ibm_chip_id(dn) == chip_id)
break;
}
if (!dn) {
pr_err("Missing VAS device node\n");
return -EINVAL;
}
if (of_property_read_u32(dn, "ibm,vas-id", &vasid)) {
pr_err("Missing ibm,vas-id device property\n");
of_node_put(dn);
return -EINVAL;
}
of_node_put(dn);
for_each_child_of_node(pn, dn) {
if (of_device_is_compatible(dn, "ibm,p9-nx-842")) {
ret = vas_cfg_coproc_info(dn, chip_id, vasid);
if (ret) {
of_node_put(dn);
return ret;
}
nx_fifo_found++;
}
}
if (!nx_fifo_found) {
pr_err("NX842 FIFO nodes are missing\n");
ret = -EINVAL;
}
return ret;
}
static int __init nx842_powernv_probe(struct device_node *dn)
{
struct nx842_coproc *coproc;
unsigned int ct, ci;
int chip_id;
chip_id = of_get_ibm_chip_id(dn);
if (chip_id < 0) {
pr_err("ibm,chip-id missing\n");
return -EINVAL;
}
if (of_property_read_u32(dn, "ibm,842-coprocessor-type", &ct)) {
pr_err("ibm,842-coprocessor-type missing\n");
return -EINVAL;
}
if (of_property_read_u32(dn, "ibm,842-coprocessor-instance", &ci)) {
pr_err("ibm,842-coprocessor-instance missing\n");
return -EINVAL;
}
coproc = kmalloc(sizeof(*coproc), GFP_KERNEL);
if (!coproc)
return -ENOMEM;
coproc->ct = ct;
coproc->ci = ci;
nx842_add_coprocs_list(coproc, chip_id);
pr_info("coprocessor found on chip %d, CT %d CI %d\n", chip_id, ct, ci);
if (!nx842_ct)
nx842_ct = ct;
else if (nx842_ct != ct)
pr_err("NX842 chip %d, CT %d != first found CT %d\n",
chip_id, ct, nx842_ct);
return 0;
}
static void nx842_delete_coprocs(void)
{
struct nx842_coproc *coproc, *n;
list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
if (coproc->vas.rxwin)
vas_win_close(coproc->vas.rxwin);
list_del(&coproc->list);
kfree(coproc);
}
}
static struct nx842_constraints nx842_powernv_constraints = {
.alignment = DDE_BUFFER_ALIGN,
.multiple = DDE_BUFFER_LAST_MULT,
.minimum = DDE_BUFFER_LAST_MULT,
.maximum = (DDL_LEN_MAX - 1) * PAGE_SIZE,
};
static struct nx842_driver nx842_powernv_driver = {
.name = KBUILD_MODNAME,
.owner = THIS_MODULE,
.workmem_size = sizeof(struct nx842_workmem),
.constraints = &nx842_powernv_constraints,
.compress = nx842_powernv_compress,
.decompress = nx842_powernv_decompress,
};
static int nx842_powernv_crypto_init_vas(struct crypto_tfm *tfm)
{
struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
struct nx842_workmem *wmem;
struct nx842_coproc *coproc;
int ret;
ret = nx842_crypto_init(tfm, &nx842_powernv_driver);
if (ret)
return ret;
wmem = PTR_ALIGN((struct nx842_workmem *)ctx->wmem, WORKMEM_ALIGN);
coproc = per_cpu(coproc_inst, smp_processor_id());
ret = -EINVAL;
if (coproc && coproc->vas.rxwin) {
wmem->txwin = nx842_alloc_txwin(coproc);
if (!IS_ERR(wmem->txwin))
return 0;
ret = PTR_ERR(wmem->txwin);
}
return ret;
}
void nx842_powernv_crypto_exit_vas(struct crypto_tfm *tfm)
{
struct nx842_crypto_ctx *ctx = crypto_tfm_ctx(tfm);
struct nx842_workmem *wmem;
wmem = PTR_ALIGN((struct nx842_workmem *)ctx->wmem, WORKMEM_ALIGN);
if (wmem && wmem->txwin)
vas_win_close(wmem->txwin);
nx842_crypto_exit(tfm);
}
static int nx842_powernv_crypto_init(struct crypto_tfm *tfm)
{
return nx842_crypto_init(tfm, &nx842_powernv_driver);
}
static struct crypto_alg nx842_powernv_alg = {
.cra_name = "842",
.cra_driver_name = "842-nx",
.cra_priority = 300,
.cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
.cra_ctxsize = sizeof(struct nx842_crypto_ctx),
.cra_module = THIS_MODULE,
.cra_init = nx842_powernv_crypto_init,
.cra_exit = nx842_crypto_exit,
.cra_u = { .compress = {
.coa_compress = nx842_crypto_compress,
.coa_decompress = nx842_crypto_decompress } }
};
static __init int nx842_powernv_init(void)
{
struct device_node *dn;
int ret;
/* verify workmem size/align restrictions */
BUILD_BUG_ON(WORKMEM_ALIGN % CRB_ALIGN);
BUILD_BUG_ON(CRB_ALIGN % DDE_ALIGN);
BUILD_BUG_ON(CRB_SIZE % DDE_ALIGN);
/* verify buffer size/align restrictions */
BUILD_BUG_ON(PAGE_SIZE % DDE_BUFFER_ALIGN);
BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT);
BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT);
for_each_compatible_node(dn, NULL, "ibm,power9-nx") {
ret = nx842_powernv_probe_vas(dn);
if (ret) {
nx842_delete_coprocs();
return ret;
}
}
if (list_empty(&nx842_coprocs)) {
for_each_compatible_node(dn, NULL, "ibm,power-nx")
nx842_powernv_probe(dn);
if (!nx842_ct)
return -ENODEV;
nx842_powernv_exec = nx842_exec_icswx;
} else {
nx842_powernv_exec = nx842_exec_vas;
nx842_powernv_alg.cra_init = nx842_powernv_crypto_init_vas;
nx842_powernv_alg.cra_exit = nx842_powernv_crypto_exit_vas;
}
ret = crypto_register_alg(&nx842_powernv_alg);
if (ret) {
nx842_delete_coprocs();
return ret;
}
return 0;
}
module_init(nx842_powernv_init);
static void __exit nx842_powernv_exit(void)
{
crypto_unregister_alg(&nx842_powernv_alg);
nx842_delete_coprocs();
}
module_exit(nx842_powernv_exit);