forked from Minki/linux
2f01a1f588
wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
354 lines
7.8 KiB
C
354 lines
7.8 KiB
C
#include "cmd.h"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/crc7.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include "wl12xx.h"
|
|
#include "wl12xx_80211.h"
|
|
#include "reg.h"
|
|
#include "spi.h"
|
|
#include "ps.h"
|
|
|
|
int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len)
|
|
{
|
|
struct wl12xx_command cmd;
|
|
unsigned long timeout;
|
|
size_t cmd_len;
|
|
u32 intr;
|
|
int ret = 0;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.id = type;
|
|
cmd.status = 0;
|
|
memcpy(cmd.parameters, buf, buf_len);
|
|
cmd_len = ALIGN(buf_len, 4) + CMDMBOX_HEADER_LEN;
|
|
|
|
wl12xx_ps_elp_wakeup(wl);
|
|
|
|
wl12xx_spi_mem_write(wl, wl->cmd_box_addr, &cmd, cmd_len);
|
|
|
|
wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(WL12XX_COMMAND_TIMEOUT);
|
|
|
|
intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
|
|
while (!(intr & wl->chip.intr_cmd_complete)) {
|
|
if (time_after(jiffies, timeout)) {
|
|
wl12xx_error("command complete timeout");
|
|
ret = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
|
|
msleep(1);
|
|
|
|
intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
|
|
}
|
|
|
|
wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
|
|
wl->chip.intr_cmd_complete);
|
|
|
|
out:
|
|
wl12xx_ps_elp_sleep(wl);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer)
|
|
{
|
|
int ret;
|
|
|
|
wl12xx_debug(DEBUG_CMD, "cmd test");
|
|
|
|
ret = wl12xx_cmd_send(wl, CMD_TEST, buf, buf_len);
|
|
if (ret < 0) {
|
|
wl12xx_warning("TEST command failed");
|
|
return ret;
|
|
}
|
|
|
|
if (answer) {
|
|
struct wl12xx_command *cmd_answer;
|
|
|
|
/*
|
|
* The test command got in, we can read the answer.
|
|
* The answer would be a wl12xx_command, where the
|
|
* parameter array contains the actual answer.
|
|
*/
|
|
|
|
wl12xx_ps_elp_wakeup(wl);
|
|
|
|
wl12xx_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
|
|
|
|
wl12xx_ps_elp_sleep(wl);
|
|
|
|
cmd_answer = buf;
|
|
if (cmd_answer->status != CMD_STATUS_SUCCESS)
|
|
wl12xx_error("TEST command answer error: %d",
|
|
cmd_answer->status);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
|
|
void *answer)
|
|
{
|
|
struct wl12xx_command *cmd;
|
|
struct acx_header header;
|
|
int ret;
|
|
|
|
wl12xx_debug(DEBUG_CMD, "cmd interrogate");
|
|
|
|
header.id = ie_id;
|
|
header.len = ie_len - sizeof(header);
|
|
|
|
ret = wl12xx_cmd_send(wl, CMD_INTERROGATE, &header, sizeof(header));
|
|
if (ret < 0) {
|
|
wl12xx_error("INTERROGATE command failed");
|
|
return ret;
|
|
}
|
|
|
|
wl12xx_ps_elp_wakeup(wl);
|
|
|
|
/* the interrogate command got in, we can read the answer */
|
|
wl12xx_spi_mem_read(wl, wl->cmd_box_addr, answer,
|
|
CMDMBOX_HEADER_LEN + ie_len);
|
|
|
|
wl12xx_ps_elp_sleep(wl);
|
|
|
|
cmd = answer;
|
|
if (cmd->status != CMD_STATUS_SUCCESS)
|
|
wl12xx_error("INTERROGATE command error: %d",
|
|
cmd->status);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len)
|
|
{
|
|
int ret;
|
|
|
|
wl12xx_debug(DEBUG_CMD, "cmd configure");
|
|
|
|
ret = wl12xx_cmd_send(wl, CMD_CONFIGURE, ie,
|
|
ie_len);
|
|
if (ret < 0) {
|
|
wl12xx_warning("CONFIGURE command NOK");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
|
|
void *bitmap, u16 bitmap_len, u8 bitmap_control)
|
|
{
|
|
struct vbm_update_request vbm;
|
|
int ret;
|
|
|
|
wl12xx_debug(DEBUG_CMD, "cmd vbm");
|
|
|
|
/* Count and period will be filled by the target */
|
|
vbm.tim.bitmap_ctrl = bitmap_control;
|
|
if (bitmap_len > PARTIAL_VBM_MAX) {
|
|
wl12xx_warning("cmd vbm len is %d B, truncating to %d",
|
|
bitmap_len, PARTIAL_VBM_MAX);
|
|
bitmap_len = PARTIAL_VBM_MAX;
|
|
}
|
|
memcpy(vbm.tim.pvb_field, bitmap, bitmap_len);
|
|
vbm.tim.identity = identity;
|
|
vbm.tim.length = bitmap_len + 3;
|
|
|
|
vbm.len = cpu_to_le16(bitmap_len + 5);
|
|
|
|
ret = wl12xx_cmd_send(wl, CMD_VBM, &vbm, sizeof(vbm));
|
|
if (ret < 0) {
|
|
wl12xx_error("VBM command failed");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable)
|
|
{
|
|
int ret;
|
|
u16 cmd_rx, cmd_tx;
|
|
|
|
wl12xx_debug(DEBUG_CMD, "cmd data path");
|
|
|
|
if (enable) {
|
|
cmd_rx = CMD_ENABLE_RX;
|
|
cmd_tx = CMD_ENABLE_TX;
|
|
} else {
|
|
cmd_rx = CMD_DISABLE_RX;
|
|
cmd_tx = CMD_DISABLE_TX;
|
|
}
|
|
|
|
ret = wl12xx_cmd_send(wl, cmd_rx, &channel, sizeof(channel));
|
|
if (ret < 0) {
|
|
wl12xx_error("rx %s cmd for channel %d failed",
|
|
enable ? "start" : "stop", channel);
|
|
return ret;
|
|
}
|
|
|
|
wl12xx_debug(DEBUG_BOOT, "rx %s cmd channel %d",
|
|
enable ? "start" : "stop", channel);
|
|
|
|
ret = wl12xx_cmd_send(wl, cmd_tx, &channel, sizeof(channel));
|
|
if (ret < 0) {
|
|
wl12xx_error("tx %s cmd for channel %d failed",
|
|
enable ? "start" : "stop", channel);
|
|
return ret;
|
|
}
|
|
|
|
wl12xx_debug(DEBUG_BOOT, "tx %s cmd channel %d",
|
|
enable ? "start" : "stop", channel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
|
|
u16 beacon_interval, u8 wait)
|
|
{
|
|
unsigned long timeout;
|
|
struct cmd_join join = {};
|
|
int ret, i;
|
|
u8 *bssid;
|
|
|
|
/* FIXME: this should be in main.c */
|
|
ret = wl12xx_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
|
|
DEFAULT_HW_GEN_MODULATION_TYPE,
|
|
wl->tx_mgmt_frm_rate,
|
|
wl->tx_mgmt_frm_mod);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
wl12xx_debug(DEBUG_CMD, "cmd join");
|
|
|
|
/* Reverse order BSSID */
|
|
bssid = (u8 *)&join.bssid_lsb;
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
bssid[i] = wl->bssid[ETH_ALEN - i - 1];
|
|
|
|
join.rx_config_options = wl->rx_config;
|
|
join.rx_filter_options = wl->rx_filter;
|
|
|
|
join.basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
|
|
RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
|
|
|
|
join.beacon_interval = beacon_interval;
|
|
join.dtim_interval = dtim_interval;
|
|
join.bss_type = bss_type;
|
|
join.channel = wl->channel;
|
|
join.ctrl = JOIN_CMD_CTRL_TX_FLUSH;
|
|
|
|
ret = wl12xx_cmd_send(wl, CMD_START_JOIN, &join, sizeof(join));
|
|
if (ret < 0) {
|
|
wl12xx_error("failed to initiate cmd join");
|
|
return ret;
|
|
}
|
|
|
|
timeout = msecs_to_jiffies(JOIN_TIMEOUT);
|
|
|
|
/*
|
|
* ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
|
|
* simplify locking we just sleep instead, for now
|
|
*/
|
|
if (wait)
|
|
msleep(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode)
|
|
{
|
|
int ret;
|
|
struct acx_ps_params ps_params;
|
|
|
|
/* FIXME: this should be in ps.c */
|
|
ret = wl12xx_acx_wake_up_conditions(wl, wl->listen_int);
|
|
if (ret < 0) {
|
|
wl12xx_error("Couldnt set wake up conditions");
|
|
return ret;
|
|
}
|
|
|
|
wl12xx_debug(DEBUG_CMD, "cmd set ps mode");
|
|
|
|
ps_params.ps_mode = ps_mode;
|
|
ps_params.send_null_data = 1;
|
|
ps_params.retries = 5;
|
|
ps_params.hang_over_period = 128;
|
|
ps_params.null_data_rate = 1; /* 1 Mbps */
|
|
|
|
ret = wl12xx_cmd_send(wl, CMD_SET_PS_MODE, &ps_params,
|
|
sizeof(ps_params));
|
|
if (ret < 0) {
|
|
wl12xx_error("cmd set_ps_mode failed");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer)
|
|
{
|
|
struct cmd_read_write_memory mem_cmd, *mem_answer;
|
|
struct wl12xx_command cmd;
|
|
int ret;
|
|
|
|
wl12xx_debug(DEBUG_CMD, "cmd read memory");
|
|
|
|
memset(&mem_cmd, 0, sizeof(mem_cmd));
|
|
mem_cmd.addr = addr;
|
|
mem_cmd.size = len;
|
|
|
|
ret = wl12xx_cmd_send(wl, CMD_READ_MEMORY, &mem_cmd, sizeof(mem_cmd));
|
|
if (ret < 0) {
|
|
wl12xx_error("read memory command failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* the read command got in, we can now read the answer */
|
|
wl12xx_spi_mem_read(wl, wl->cmd_box_addr, &cmd,
|
|
CMDMBOX_HEADER_LEN + sizeof(mem_cmd));
|
|
|
|
if (cmd.status != CMD_STATUS_SUCCESS)
|
|
wl12xx_error("error in read command result: %d", cmd.status);
|
|
|
|
mem_answer = (struct cmd_read_write_memory *) cmd.parameters;
|
|
memcpy(answer, mem_answer->value, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
|
|
void *buf, size_t buf_len)
|
|
{
|
|
struct wl12xx_cmd_packet_template template;
|
|
int ret;
|
|
|
|
wl12xx_debug(DEBUG_CMD, "cmd template %d", cmd_id);
|
|
|
|
memset(&template, 0, sizeof(template));
|
|
|
|
WARN_ON(buf_len > WL12XX_MAX_TEMPLATE_SIZE);
|
|
buf_len = min_t(size_t, buf_len, WL12XX_MAX_TEMPLATE_SIZE);
|
|
template.size = cpu_to_le16(buf_len);
|
|
|
|
if (buf)
|
|
memcpy(template.template, buf, buf_len);
|
|
|
|
ret = wl12xx_cmd_send(wl, cmd_id, &template,
|
|
sizeof(template.size) + buf_len);
|
|
if (ret < 0) {
|
|
wl12xx_warning("cmd set_template failed: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|