linux/arch/arm/boot/dts/sun5i-a10s.dtsi
Emilio López c3e5e66b65 ARM: sunxi: add PLL5 and PLL6 support
This commit adds PLL5 and PLL6 nodes to the sun4i, sun5i and sun7i
device trees.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-28 17:28:23 -03:00

359 lines
8.0 KiB
Plaintext

/*
* Copyright 2013 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&intc>;
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
};
};
memory {
reg = <0x40000000 0x20000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
/*
* This is a dummy clock, to be used as placeholder on
* other mux clocks when a specific parent clock is not
* yet implemented. It should be dropped when the driver
* is complete.
*/
dummy: dummy {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
osc24M: osc24M@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
};
osc32k: osc32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
pll1: pll1@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
};
pll4: pll4@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
};
pll5: pll5@01c20020 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll5-clk";
reg = <0x01c20020 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll5_ddr", "pll5_other";
};
pll6: pll6@01c20028 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6_sata", "pll6_other", "pll6";
};
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
};
axi: axi@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
};
axi_gates: axi_gates@01c2005c {
#clock-cells = <1>;
compatible = "allwinner,sun4i-axi-gates-clk";
reg = <0x01c2005c 0x4>;
clocks = <&axi>;
clock-output-names = "axi_dram";
};
ahb: ahb@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
};
ahb_gates: ahb_gates@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
};
apb0: apb0@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
};
apb0_gates: apb0_gates@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
"apb0_ir", "apb0_keypad";
};
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
};
apb1_gates: apb1_gates@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb1>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_uart0", "apb1_uart1",
"apb1_uart2", "apb1_uart3";
};
};
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
status = "disabled";
};
mdio@01c0b080 {
compatible = "allwinner,sun4i-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
interrupt-controller;
#interrupt-cells = <1>;
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun5i-a10s-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <28>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
#gpio-cells = <3>;
uart0_pins_a: uart0@0 {
allwinner,pins = "PB19", "PB20";
allwinner,function = "uart0";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
uart2_pins_a: uart2@0 {
allwinner,pins = "PC18", "PC19";
allwinner,function = "uart2";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
uart3_pins_a: uart3@0 {
allwinner,pins = "PG9", "PG10";
allwinner,function = "uart3";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
emac_pins_a: emac0@0 {
allwinner,pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB15", "PB16";
allwinner,function = "i2c1";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB17", "PB18";
allwinner,function = "i2c2";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&osc24M>;
};
wdt: watchdog@01c20c90 {
compatible = "allwinner,sun4i-wdt";
reg = <0x01c20c90 0x10>;
};
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-sid";
reg = <0x01c23800 0x10>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
status = "disabled";
};
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
status = "disabled";
};
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
status = "disabled";
};
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
status = "disabled";
};
i2c0: i2c@01c2ac00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
};
i2c1: i2c@01c2b000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
};
i2c2: i2c@01c2b400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
};
};
};