forked from Minki/linux
91c8a326a1
Since drm_i915_private is now a subclass of drm_device we do not need to
chase the drm_i915_private->dev backpointer and can instead simply
access drm_i915_private->drm directly.
text data bss dec hex filename
1068757 4565 416 1073738 10624a drivers/gpu/drm/i915/i915.ko
1066949 4565 416 1071930 105b3a drivers/gpu/drm/i915/i915.ko
Created by the coccinelle script:
@@
struct drm_i915_private *d;
identifier i;
@@
(
- d->dev->i
+ d->drm.i
|
- d->dev
+ &d->drm
)
and for good measure the dev_priv->dev backpointer was removed entirely.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-4-git-send-email-chris@chris-wilson.co.uk
2773 lines
80 KiB
C
2773 lines
80 KiB
C
/*
|
|
* Copyright © 2012-2014 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Eugeni Dodonov <eugeni.dodonov@intel.com>
|
|
* Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
*
|
|
*/
|
|
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/vgaarb.h>
|
|
|
|
#include "i915_drv.h"
|
|
#include "intel_drv.h"
|
|
|
|
/**
|
|
* DOC: runtime pm
|
|
*
|
|
* The i915 driver supports dynamic enabling and disabling of entire hardware
|
|
* blocks at runtime. This is especially important on the display side where
|
|
* software is supposed to control many power gates manually on recent hardware,
|
|
* since on the GT side a lot of the power management is done by the hardware.
|
|
* But even there some manual control at the device level is required.
|
|
*
|
|
* Since i915 supports a diverse set of platforms with a unified codebase and
|
|
* hardware engineers just love to shuffle functionality around between power
|
|
* domains there's a sizeable amount of indirection required. This file provides
|
|
* generic functions to the driver for grabbing and releasing references for
|
|
* abstract power domains. It then maps those to the actual power wells
|
|
* present for a given platform.
|
|
*/
|
|
|
|
#define for_each_power_well(i, power_well, domain_mask, power_domains) \
|
|
for (i = 0; \
|
|
i < (power_domains)->power_well_count && \
|
|
((power_well) = &(power_domains)->power_wells[i]); \
|
|
i++) \
|
|
for_each_if ((power_well)->domains & (domain_mask))
|
|
|
|
#define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \
|
|
for (i = (power_domains)->power_well_count - 1; \
|
|
i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\
|
|
i--) \
|
|
for_each_if ((power_well)->domains & (domain_mask))
|
|
|
|
bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
|
|
int power_well_id);
|
|
|
|
static struct i915_power_well *
|
|
lookup_power_well(struct drm_i915_private *dev_priv, int power_well_id);
|
|
|
|
const char *
|
|
intel_display_power_domain_str(enum intel_display_power_domain domain)
|
|
{
|
|
switch (domain) {
|
|
case POWER_DOMAIN_PIPE_A:
|
|
return "PIPE_A";
|
|
case POWER_DOMAIN_PIPE_B:
|
|
return "PIPE_B";
|
|
case POWER_DOMAIN_PIPE_C:
|
|
return "PIPE_C";
|
|
case POWER_DOMAIN_PIPE_A_PANEL_FITTER:
|
|
return "PIPE_A_PANEL_FITTER";
|
|
case POWER_DOMAIN_PIPE_B_PANEL_FITTER:
|
|
return "PIPE_B_PANEL_FITTER";
|
|
case POWER_DOMAIN_PIPE_C_PANEL_FITTER:
|
|
return "PIPE_C_PANEL_FITTER";
|
|
case POWER_DOMAIN_TRANSCODER_A:
|
|
return "TRANSCODER_A";
|
|
case POWER_DOMAIN_TRANSCODER_B:
|
|
return "TRANSCODER_B";
|
|
case POWER_DOMAIN_TRANSCODER_C:
|
|
return "TRANSCODER_C";
|
|
case POWER_DOMAIN_TRANSCODER_EDP:
|
|
return "TRANSCODER_EDP";
|
|
case POWER_DOMAIN_TRANSCODER_DSI_A:
|
|
return "TRANSCODER_DSI_A";
|
|
case POWER_DOMAIN_TRANSCODER_DSI_C:
|
|
return "TRANSCODER_DSI_C";
|
|
case POWER_DOMAIN_PORT_DDI_A_LANES:
|
|
return "PORT_DDI_A_LANES";
|
|
case POWER_DOMAIN_PORT_DDI_B_LANES:
|
|
return "PORT_DDI_B_LANES";
|
|
case POWER_DOMAIN_PORT_DDI_C_LANES:
|
|
return "PORT_DDI_C_LANES";
|
|
case POWER_DOMAIN_PORT_DDI_D_LANES:
|
|
return "PORT_DDI_D_LANES";
|
|
case POWER_DOMAIN_PORT_DDI_E_LANES:
|
|
return "PORT_DDI_E_LANES";
|
|
case POWER_DOMAIN_PORT_DSI:
|
|
return "PORT_DSI";
|
|
case POWER_DOMAIN_PORT_CRT:
|
|
return "PORT_CRT";
|
|
case POWER_DOMAIN_PORT_OTHER:
|
|
return "PORT_OTHER";
|
|
case POWER_DOMAIN_VGA:
|
|
return "VGA";
|
|
case POWER_DOMAIN_AUDIO:
|
|
return "AUDIO";
|
|
case POWER_DOMAIN_PLLS:
|
|
return "PLLS";
|
|
case POWER_DOMAIN_AUX_A:
|
|
return "AUX_A";
|
|
case POWER_DOMAIN_AUX_B:
|
|
return "AUX_B";
|
|
case POWER_DOMAIN_AUX_C:
|
|
return "AUX_C";
|
|
case POWER_DOMAIN_AUX_D:
|
|
return "AUX_D";
|
|
case POWER_DOMAIN_GMBUS:
|
|
return "GMBUS";
|
|
case POWER_DOMAIN_INIT:
|
|
return "INIT";
|
|
case POWER_DOMAIN_MODESET:
|
|
return "MODESET";
|
|
default:
|
|
MISSING_CASE(domain);
|
|
return "?";
|
|
}
|
|
}
|
|
|
|
static void intel_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
DRM_DEBUG_KMS("enabling %s\n", power_well->name);
|
|
power_well->ops->enable(dev_priv, power_well);
|
|
power_well->hw_enabled = true;
|
|
}
|
|
|
|
static void intel_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
DRM_DEBUG_KMS("disabling %s\n", power_well->name);
|
|
power_well->hw_enabled = false;
|
|
power_well->ops->disable(dev_priv, power_well);
|
|
}
|
|
|
|
static void intel_power_well_get(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
if (!power_well->count++)
|
|
intel_power_well_enable(dev_priv, power_well);
|
|
}
|
|
|
|
static void intel_power_well_put(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
WARN(!power_well->count, "Use count on power well %s is already zero",
|
|
power_well->name);
|
|
|
|
if (!--power_well->count)
|
|
intel_power_well_disable(dev_priv, power_well);
|
|
}
|
|
|
|
/*
|
|
* We should only use the power well if we explicitly asked the hardware to
|
|
* enable it, so check if it's enabled and also check if we've requested it to
|
|
* be enabled.
|
|
*/
|
|
static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
return I915_READ(HSW_PWR_WELL_DRIVER) ==
|
|
(HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED);
|
|
}
|
|
|
|
/**
|
|
* __intel_display_power_is_enabled - unlocked check for a power domain
|
|
* @dev_priv: i915 device instance
|
|
* @domain: power domain to check
|
|
*
|
|
* This is the unlocked version of intel_display_power_is_enabled() and should
|
|
* only be used from error capture and recovery code where deadlocks are
|
|
* possible.
|
|
*
|
|
* Returns:
|
|
* True when the power domain is enabled, false otherwise.
|
|
*/
|
|
bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain)
|
|
{
|
|
struct i915_power_domains *power_domains;
|
|
struct i915_power_well *power_well;
|
|
bool is_enabled;
|
|
int i;
|
|
|
|
if (dev_priv->pm.suspended)
|
|
return false;
|
|
|
|
power_domains = &dev_priv->power_domains;
|
|
|
|
is_enabled = true;
|
|
|
|
for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
|
|
if (power_well->always_on)
|
|
continue;
|
|
|
|
if (!power_well->hw_enabled) {
|
|
is_enabled = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return is_enabled;
|
|
}
|
|
|
|
/**
|
|
* intel_display_power_is_enabled - check for a power domain
|
|
* @dev_priv: i915 device instance
|
|
* @domain: power domain to check
|
|
*
|
|
* This function can be used to check the hw power domain state. It is mostly
|
|
* used in hardware state readout functions. Everywhere else code should rely
|
|
* upon explicit power domain reference counting to ensure that the hardware
|
|
* block is powered up before accessing it.
|
|
*
|
|
* Callers must hold the relevant modesetting locks to ensure that concurrent
|
|
* threads can't disable the power well while the caller tries to read a few
|
|
* registers.
|
|
*
|
|
* Returns:
|
|
* True when the power domain is enabled, false otherwise.
|
|
*/
|
|
bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain)
|
|
{
|
|
struct i915_power_domains *power_domains;
|
|
bool ret;
|
|
|
|
power_domains = &dev_priv->power_domains;
|
|
|
|
mutex_lock(&power_domains->lock);
|
|
ret = __intel_display_power_is_enabled(dev_priv, domain);
|
|
mutex_unlock(&power_domains->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* intel_display_set_init_power - set the initial power domain state
|
|
* @dev_priv: i915 device instance
|
|
* @enable: whether to enable or disable the initial power domain state
|
|
*
|
|
* For simplicity our driver load/unload and system suspend/resume code assumes
|
|
* that all power domains are always enabled. This functions controls the state
|
|
* of this little hack. While the initial power domain state is enabled runtime
|
|
* pm is effectively disabled.
|
|
*/
|
|
void intel_display_set_init_power(struct drm_i915_private *dev_priv,
|
|
bool enable)
|
|
{
|
|
if (dev_priv->power_domains.init_power_on == enable)
|
|
return;
|
|
|
|
if (enable)
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
|
|
else
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
|
|
|
|
dev_priv->power_domains.init_power_on = enable;
|
|
}
|
|
|
|
/*
|
|
* Starting with Haswell, we have a "Power Down Well" that can be turned off
|
|
* when not needed anymore. We have 4 registers that can request the power well
|
|
* to be enabled, and it will only be disabled if none of the registers is
|
|
* requesting it to be enabled.
|
|
*/
|
|
static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
|
|
/*
|
|
* After we re-enable the power well, if we touch VGA register 0x3d5
|
|
* we'll get unclaimed register interrupts. This stops after we write
|
|
* anything to the VGA MSR register. The vgacon module uses this
|
|
* register all the time, so if we unbind our driver and, as a
|
|
* consequence, bind vgacon, we'll get stuck in an infinite loop at
|
|
* console_unlock(). So make here we touch the VGA MSR register, making
|
|
* sure vgacon can keep working normally without triggering interrupts
|
|
* and error messages.
|
|
*/
|
|
vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
|
|
outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
|
|
vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
|
|
|
|
if (IS_BROADWELL(dev))
|
|
gen8_irq_power_well_post_enable(dev_priv,
|
|
1 << PIPE_C | 1 << PIPE_B);
|
|
}
|
|
|
|
static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (IS_BROADWELL(dev_priv))
|
|
gen8_irq_power_well_pre_disable(dev_priv,
|
|
1 << PIPE_C | 1 << PIPE_B);
|
|
}
|
|
|
|
static void skl_power_well_post_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
|
|
/*
|
|
* After we re-enable the power well, if we touch VGA register 0x3d5
|
|
* we'll get unclaimed register interrupts. This stops after we write
|
|
* anything to the VGA MSR register. The vgacon module uses this
|
|
* register all the time, so if we unbind our driver and, as a
|
|
* consequence, bind vgacon, we'll get stuck in an infinite loop at
|
|
* console_unlock(). So make here we touch the VGA MSR register, making
|
|
* sure vgacon can keep working normally without triggering interrupts
|
|
* and error messages.
|
|
*/
|
|
if (power_well->data == SKL_DISP_PW_2) {
|
|
vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
|
|
outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
|
|
vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
|
|
|
|
gen8_irq_power_well_post_enable(dev_priv,
|
|
1 << PIPE_C | 1 << PIPE_B);
|
|
}
|
|
}
|
|
|
|
static void skl_power_well_pre_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
if (power_well->data == SKL_DISP_PW_2)
|
|
gen8_irq_power_well_pre_disable(dev_priv,
|
|
1 << PIPE_C | 1 << PIPE_B);
|
|
}
|
|
|
|
static void hsw_set_power_well(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well, bool enable)
|
|
{
|
|
bool is_enabled, enable_requested;
|
|
uint32_t tmp;
|
|
|
|
tmp = I915_READ(HSW_PWR_WELL_DRIVER);
|
|
is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED;
|
|
enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST;
|
|
|
|
if (enable) {
|
|
if (!enable_requested)
|
|
I915_WRITE(HSW_PWR_WELL_DRIVER,
|
|
HSW_PWR_WELL_ENABLE_REQUEST);
|
|
|
|
if (!is_enabled) {
|
|
DRM_DEBUG_KMS("Enabling power well\n");
|
|
if (intel_wait_for_register(dev_priv,
|
|
HSW_PWR_WELL_DRIVER,
|
|
HSW_PWR_WELL_STATE_ENABLED,
|
|
HSW_PWR_WELL_STATE_ENABLED,
|
|
20))
|
|
DRM_ERROR("Timeout enabling power well\n");
|
|
hsw_power_well_post_enable(dev_priv);
|
|
}
|
|
|
|
} else {
|
|
if (enable_requested) {
|
|
hsw_power_well_pre_disable(dev_priv);
|
|
I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
|
|
POSTING_READ(HSW_PWR_WELL_DRIVER);
|
|
DRM_DEBUG_KMS("Requesting to disable the power well\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
#define SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_TRANSCODER_A) | \
|
|
BIT(POWER_DOMAIN_PIPE_B) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_B) | \
|
|
BIT(POWER_DOMAIN_PIPE_C) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_C) | \
|
|
BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_E_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_B) | \
|
|
BIT(POWER_DOMAIN_AUX_C) | \
|
|
BIT(POWER_DOMAIN_AUX_D) | \
|
|
BIT(POWER_DOMAIN_AUDIO) | \
|
|
BIT(POWER_DOMAIN_VGA) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
#define SKL_DISPLAY_DDI_A_E_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_E_LANES) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
#define SKL_DISPLAY_DDI_B_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
#define SKL_DISPLAY_DDI_C_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
#define SKL_DISPLAY_DDI_D_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
#define SKL_DISPLAY_DC_OFF_POWER_DOMAINS ( \
|
|
SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
|
|
BIT(POWER_DOMAIN_MODESET) | \
|
|
BIT(POWER_DOMAIN_AUX_A) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_TRANSCODER_A) | \
|
|
BIT(POWER_DOMAIN_PIPE_B) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_B) | \
|
|
BIT(POWER_DOMAIN_PIPE_C) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_C) | \
|
|
BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_B) | \
|
|
BIT(POWER_DOMAIN_AUX_C) | \
|
|
BIT(POWER_DOMAIN_AUDIO) | \
|
|
BIT(POWER_DOMAIN_VGA) | \
|
|
BIT(POWER_DOMAIN_GMBUS) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
#define BXT_DISPLAY_DC_OFF_POWER_DOMAINS ( \
|
|
BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
|
|
BIT(POWER_DOMAIN_MODESET) | \
|
|
BIT(POWER_DOMAIN_AUX_A) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
#define BXT_DPIO_CMN_A_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_A) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
#define BXT_DPIO_CMN_BC_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_B) | \
|
|
BIT(POWER_DOMAIN_AUX_C) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
|
|
{
|
|
WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
|
|
"DC9 already programmed to be enabled.\n");
|
|
WARN_ONCE(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
|
|
"DC5 still not disabled to enable DC9.\n");
|
|
WARN_ONCE(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on.\n");
|
|
WARN_ONCE(intel_irqs_enabled(dev_priv),
|
|
"Interrupts not disabled yet.\n");
|
|
|
|
/*
|
|
* TODO: check for the following to verify the conditions to enter DC9
|
|
* state are satisfied:
|
|
* 1] Check relevant display engine registers to verify if mode set
|
|
* disable sequence was followed.
|
|
* 2] Check if display uninitialize sequence is initialized.
|
|
*/
|
|
}
|
|
|
|
static void assert_can_disable_dc9(struct drm_i915_private *dev_priv)
|
|
{
|
|
WARN_ONCE(intel_irqs_enabled(dev_priv),
|
|
"Interrupts not disabled yet.\n");
|
|
WARN_ONCE(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
|
|
"DC5 still not disabled.\n");
|
|
|
|
/*
|
|
* TODO: check for the following to verify DC9 state was indeed
|
|
* entered before programming to disable it:
|
|
* 1] Check relevant display engine registers to verify if mode
|
|
* set disable sequence was followed.
|
|
* 2] Check if display uninitialize sequence is initialized.
|
|
*/
|
|
}
|
|
|
|
static void gen9_write_dc_state(struct drm_i915_private *dev_priv,
|
|
u32 state)
|
|
{
|
|
int rewrites = 0;
|
|
int rereads = 0;
|
|
u32 v;
|
|
|
|
I915_WRITE(DC_STATE_EN, state);
|
|
|
|
/* It has been observed that disabling the dc6 state sometimes
|
|
* doesn't stick and dmc keeps returning old value. Make sure
|
|
* the write really sticks enough times and also force rewrite until
|
|
* we are confident that state is exactly what we want.
|
|
*/
|
|
do {
|
|
v = I915_READ(DC_STATE_EN);
|
|
|
|
if (v != state) {
|
|
I915_WRITE(DC_STATE_EN, state);
|
|
rewrites++;
|
|
rereads = 0;
|
|
} else if (rereads++ > 5) {
|
|
break;
|
|
}
|
|
|
|
} while (rewrites < 100);
|
|
|
|
if (v != state)
|
|
DRM_ERROR("Writing dc state to 0x%x failed, now 0x%x\n",
|
|
state, v);
|
|
|
|
/* Most of the times we need one retry, avoid spam */
|
|
if (rewrites > 1)
|
|
DRM_DEBUG_KMS("Rewrote dc state to 0x%x %d times\n",
|
|
state, rewrites);
|
|
}
|
|
|
|
static u32 gen9_dc_mask(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 mask;
|
|
|
|
mask = DC_STATE_EN_UPTO_DC5;
|
|
if (IS_BROXTON(dev_priv))
|
|
mask |= DC_STATE_EN_DC9;
|
|
else
|
|
mask |= DC_STATE_EN_UPTO_DC6;
|
|
|
|
return mask;
|
|
}
|
|
|
|
void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 val;
|
|
|
|
val = I915_READ(DC_STATE_EN) & gen9_dc_mask(dev_priv);
|
|
|
|
DRM_DEBUG_KMS("Resetting DC state tracking from %02x to %02x\n",
|
|
dev_priv->csr.dc_state, val);
|
|
dev_priv->csr.dc_state = val;
|
|
}
|
|
|
|
static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
|
|
{
|
|
uint32_t val;
|
|
uint32_t mask;
|
|
|
|
if (WARN_ON_ONCE(state & ~dev_priv->csr.allowed_dc_mask))
|
|
state &= dev_priv->csr.allowed_dc_mask;
|
|
|
|
val = I915_READ(DC_STATE_EN);
|
|
mask = gen9_dc_mask(dev_priv);
|
|
DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n",
|
|
val & mask, state);
|
|
|
|
/* Check if DMC is ignoring our DC state requests */
|
|
if ((val & mask) != dev_priv->csr.dc_state)
|
|
DRM_ERROR("DC state mismatch (0x%x -> 0x%x)\n",
|
|
dev_priv->csr.dc_state, val & mask);
|
|
|
|
val &= ~mask;
|
|
val |= state;
|
|
|
|
gen9_write_dc_state(dev_priv, val);
|
|
|
|
dev_priv->csr.dc_state = val & mask;
|
|
}
|
|
|
|
void bxt_enable_dc9(struct drm_i915_private *dev_priv)
|
|
{
|
|
assert_can_enable_dc9(dev_priv);
|
|
|
|
DRM_DEBUG_KMS("Enabling DC9\n");
|
|
|
|
intel_power_sequencer_reset(dev_priv);
|
|
gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9);
|
|
}
|
|
|
|
void bxt_disable_dc9(struct drm_i915_private *dev_priv)
|
|
{
|
|
assert_can_disable_dc9(dev_priv);
|
|
|
|
DRM_DEBUG_KMS("Disabling DC9\n");
|
|
|
|
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
|
|
}
|
|
|
|
static void assert_csr_loaded(struct drm_i915_private *dev_priv)
|
|
{
|
|
WARN_ONCE(!I915_READ(CSR_PROGRAM(0)),
|
|
"CSR program storage start is NULL\n");
|
|
WARN_ONCE(!I915_READ(CSR_SSP_BASE), "CSR SSP Base Not fine\n");
|
|
WARN_ONCE(!I915_READ(CSR_HTP_SKL), "CSR HTP Not fine\n");
|
|
}
|
|
|
|
static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
|
|
{
|
|
bool pg2_enabled = intel_display_power_well_is_enabled(dev_priv,
|
|
SKL_DISP_PW_2);
|
|
|
|
WARN_ONCE(pg2_enabled, "PG2 not disabled to enable DC5.\n");
|
|
|
|
WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5),
|
|
"DC5 already programmed to be enabled.\n");
|
|
assert_rpm_wakelock_held(dev_priv);
|
|
|
|
assert_csr_loaded(dev_priv);
|
|
}
|
|
|
|
void gen9_enable_dc5(struct drm_i915_private *dev_priv)
|
|
{
|
|
assert_can_enable_dc5(dev_priv);
|
|
|
|
DRM_DEBUG_KMS("Enabling DC5\n");
|
|
|
|
gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
|
|
}
|
|
|
|
static void assert_can_enable_dc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
WARN_ONCE(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
|
|
"Backlight is not disabled.\n");
|
|
WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6),
|
|
"DC6 already programmed to be enabled.\n");
|
|
|
|
assert_csr_loaded(dev_priv);
|
|
}
|
|
|
|
void skl_enable_dc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
assert_can_enable_dc6(dev_priv);
|
|
|
|
DRM_DEBUG_KMS("Enabling DC6\n");
|
|
|
|
gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
|
|
|
|
}
|
|
|
|
void skl_disable_dc6(struct drm_i915_private *dev_priv)
|
|
{
|
|
DRM_DEBUG_KMS("Disabling DC6\n");
|
|
|
|
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
|
|
}
|
|
|
|
static void
|
|
gen9_sanitize_power_well_requests(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
enum skl_disp_power_wells power_well_id = power_well->data;
|
|
u32 val;
|
|
u32 mask;
|
|
|
|
mask = SKL_POWER_WELL_REQ(power_well_id);
|
|
|
|
val = I915_READ(HSW_PWR_WELL_KVMR);
|
|
if (WARN_ONCE(val & mask, "Clearing unexpected KVMR request for %s\n",
|
|
power_well->name))
|
|
I915_WRITE(HSW_PWR_WELL_KVMR, val & ~mask);
|
|
|
|
val = I915_READ(HSW_PWR_WELL_BIOS);
|
|
val |= I915_READ(HSW_PWR_WELL_DEBUG);
|
|
|
|
if (!(val & mask))
|
|
return;
|
|
|
|
/*
|
|
* DMC is known to force on the request bits for power well 1 on SKL
|
|
* and BXT and the misc IO power well on SKL but we don't expect any
|
|
* other request bits to be set, so WARN for those.
|
|
*/
|
|
if (power_well_id == SKL_DISP_PW_1 ||
|
|
((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) &&
|
|
power_well_id == SKL_DISP_PW_MISC_IO))
|
|
DRM_DEBUG_DRIVER("Clearing auxiliary requests for %s forced on "
|
|
"by DMC\n", power_well->name);
|
|
else
|
|
WARN_ONCE(1, "Clearing unexpected auxiliary requests for %s\n",
|
|
power_well->name);
|
|
|
|
I915_WRITE(HSW_PWR_WELL_BIOS, val & ~mask);
|
|
I915_WRITE(HSW_PWR_WELL_DEBUG, val & ~mask);
|
|
}
|
|
|
|
static void skl_set_power_well(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well, bool enable)
|
|
{
|
|
uint32_t tmp, fuse_status;
|
|
uint32_t req_mask, state_mask;
|
|
bool is_enabled, enable_requested, check_fuse_status = false;
|
|
|
|
tmp = I915_READ(HSW_PWR_WELL_DRIVER);
|
|
fuse_status = I915_READ(SKL_FUSE_STATUS);
|
|
|
|
switch (power_well->data) {
|
|
case SKL_DISP_PW_1:
|
|
if (intel_wait_for_register(dev_priv,
|
|
SKL_FUSE_STATUS,
|
|
SKL_FUSE_PG0_DIST_STATUS,
|
|
SKL_FUSE_PG0_DIST_STATUS,
|
|
1)) {
|
|
DRM_ERROR("PG0 not enabled\n");
|
|
return;
|
|
}
|
|
break;
|
|
case SKL_DISP_PW_2:
|
|
if (!(fuse_status & SKL_FUSE_PG1_DIST_STATUS)) {
|
|
DRM_ERROR("PG1 in disabled state\n");
|
|
return;
|
|
}
|
|
break;
|
|
case SKL_DISP_PW_DDI_A_E:
|
|
case SKL_DISP_PW_DDI_B:
|
|
case SKL_DISP_PW_DDI_C:
|
|
case SKL_DISP_PW_DDI_D:
|
|
case SKL_DISP_PW_MISC_IO:
|
|
break;
|
|
default:
|
|
WARN(1, "Unknown power well %lu\n", power_well->data);
|
|
return;
|
|
}
|
|
|
|
req_mask = SKL_POWER_WELL_REQ(power_well->data);
|
|
enable_requested = tmp & req_mask;
|
|
state_mask = SKL_POWER_WELL_STATE(power_well->data);
|
|
is_enabled = tmp & state_mask;
|
|
|
|
if (!enable && enable_requested)
|
|
skl_power_well_pre_disable(dev_priv, power_well);
|
|
|
|
if (enable) {
|
|
if (!enable_requested) {
|
|
WARN((tmp & state_mask) &&
|
|
!I915_READ(HSW_PWR_WELL_BIOS),
|
|
"Invalid for power well status to be enabled, unless done by the BIOS, \
|
|
when request is to disable!\n");
|
|
I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
|
|
}
|
|
|
|
if (!is_enabled) {
|
|
DRM_DEBUG_KMS("Enabling %s\n", power_well->name);
|
|
check_fuse_status = true;
|
|
}
|
|
} else {
|
|
if (enable_requested) {
|
|
I915_WRITE(HSW_PWR_WELL_DRIVER, tmp & ~req_mask);
|
|
POSTING_READ(HSW_PWR_WELL_DRIVER);
|
|
DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
|
|
}
|
|
|
|
if (IS_GEN9(dev_priv))
|
|
gen9_sanitize_power_well_requests(dev_priv, power_well);
|
|
}
|
|
|
|
if (wait_for(!!(I915_READ(HSW_PWR_WELL_DRIVER) & state_mask) == enable,
|
|
1))
|
|
DRM_ERROR("%s %s timeout\n",
|
|
power_well->name, enable ? "enable" : "disable");
|
|
|
|
if (check_fuse_status) {
|
|
if (power_well->data == SKL_DISP_PW_1) {
|
|
if (intel_wait_for_register(dev_priv,
|
|
SKL_FUSE_STATUS,
|
|
SKL_FUSE_PG1_DIST_STATUS,
|
|
SKL_FUSE_PG1_DIST_STATUS,
|
|
1))
|
|
DRM_ERROR("PG1 distributing status timeout\n");
|
|
} else if (power_well->data == SKL_DISP_PW_2) {
|
|
if (intel_wait_for_register(dev_priv,
|
|
SKL_FUSE_STATUS,
|
|
SKL_FUSE_PG2_DIST_STATUS,
|
|
SKL_FUSE_PG2_DIST_STATUS,
|
|
1))
|
|
DRM_ERROR("PG2 distributing status timeout\n");
|
|
}
|
|
}
|
|
|
|
if (enable && !is_enabled)
|
|
skl_power_well_post_enable(dev_priv, power_well);
|
|
}
|
|
|
|
static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
hsw_set_power_well(dev_priv, power_well, power_well->count > 0);
|
|
|
|
/*
|
|
* We're taking over the BIOS, so clear any requests made by it since
|
|
* the driver is in charge now.
|
|
*/
|
|
if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST)
|
|
I915_WRITE(HSW_PWR_WELL_BIOS, 0);
|
|
}
|
|
|
|
static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
hsw_set_power_well(dev_priv, power_well, true);
|
|
}
|
|
|
|
static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
hsw_set_power_well(dev_priv, power_well, false);
|
|
}
|
|
|
|
static bool skl_power_well_enabled(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
uint32_t mask = SKL_POWER_WELL_REQ(power_well->data) |
|
|
SKL_POWER_WELL_STATE(power_well->data);
|
|
|
|
return (I915_READ(HSW_PWR_WELL_DRIVER) & mask) == mask;
|
|
}
|
|
|
|
static void skl_power_well_sync_hw(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
skl_set_power_well(dev_priv, power_well, power_well->count > 0);
|
|
|
|
/* Clear any request made by BIOS as driver is taking over */
|
|
I915_WRITE(HSW_PWR_WELL_BIOS, 0);
|
|
}
|
|
|
|
static void skl_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
skl_set_power_well(dev_priv, power_well, true);
|
|
}
|
|
|
|
static void skl_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
skl_set_power_well(dev_priv, power_well, false);
|
|
}
|
|
|
|
static enum dpio_phy bxt_power_well_to_phy(struct i915_power_well *power_well)
|
|
{
|
|
enum skl_disp_power_wells power_well_id = power_well->data;
|
|
|
|
return power_well_id == BXT_DPIO_CMN_A ? DPIO_PHY1 : DPIO_PHY0;
|
|
}
|
|
|
|
static void bxt_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
enum skl_disp_power_wells power_well_id = power_well->data;
|
|
struct i915_power_well *cmn_a_well;
|
|
|
|
if (power_well_id == BXT_DPIO_CMN_BC) {
|
|
/*
|
|
* We need to copy the GRC calibration value from the eDP PHY,
|
|
* so make sure it's powered up.
|
|
*/
|
|
cmn_a_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_A);
|
|
intel_power_well_get(dev_priv, cmn_a_well);
|
|
}
|
|
|
|
bxt_ddi_phy_init(dev_priv, bxt_power_well_to_phy(power_well));
|
|
|
|
if (power_well_id == BXT_DPIO_CMN_BC)
|
|
intel_power_well_put(dev_priv, cmn_a_well);
|
|
}
|
|
|
|
static void bxt_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
bxt_ddi_phy_uninit(dev_priv, bxt_power_well_to_phy(power_well));
|
|
}
|
|
|
|
static bool bxt_dpio_cmn_power_well_enabled(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
return bxt_ddi_phy_is_enabled(dev_priv,
|
|
bxt_power_well_to_phy(power_well));
|
|
}
|
|
|
|
static void bxt_dpio_cmn_power_well_sync_hw(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
if (power_well->count > 0)
|
|
bxt_dpio_cmn_power_well_enable(dev_priv, power_well);
|
|
else
|
|
bxt_dpio_cmn_power_well_disable(dev_priv, power_well);
|
|
}
|
|
|
|
|
|
static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct i915_power_well *power_well;
|
|
|
|
power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_A);
|
|
if (power_well->count > 0)
|
|
bxt_ddi_phy_verify_state(dev_priv,
|
|
bxt_power_well_to_phy(power_well));
|
|
|
|
power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_BC);
|
|
if (power_well->count > 0)
|
|
bxt_ddi_phy_verify_state(dev_priv,
|
|
bxt_power_well_to_phy(power_well));
|
|
}
|
|
|
|
static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
return (I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0;
|
|
}
|
|
|
|
static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 tmp = I915_READ(DBUF_CTL);
|
|
|
|
WARN((tmp & (DBUF_POWER_STATE | DBUF_POWER_REQUEST)) !=
|
|
(DBUF_POWER_STATE | DBUF_POWER_REQUEST),
|
|
"Unexpected DBuf power power state (0x%08x)\n", tmp);
|
|
}
|
|
|
|
static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
|
|
|
|
WARN_ON(dev_priv->cdclk_freq !=
|
|
dev_priv->display.get_display_clock_speed(&dev_priv->drm));
|
|
|
|
gen9_assert_dbuf_enabled(dev_priv);
|
|
|
|
if (IS_BROXTON(dev_priv))
|
|
bxt_verify_ddi_phy_power_wells(dev_priv);
|
|
}
|
|
|
|
static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
if (!dev_priv->csr.dmc_payload)
|
|
return;
|
|
|
|
if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC6)
|
|
skl_enable_dc6(dev_priv);
|
|
else if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC5)
|
|
gen9_enable_dc5(dev_priv);
|
|
}
|
|
|
|
static void gen9_dc_off_power_well_sync_hw(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
if (power_well->count > 0)
|
|
gen9_dc_off_power_well_enable(dev_priv, power_well);
|
|
else
|
|
gen9_dc_off_power_well_disable(dev_priv, power_well);
|
|
}
|
|
|
|
static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
}
|
|
|
|
static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
static void vlv_set_power_well(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well, bool enable)
|
|
{
|
|
enum punit_power_well power_well_id = power_well->data;
|
|
u32 mask;
|
|
u32 state;
|
|
u32 ctrl;
|
|
|
|
mask = PUNIT_PWRGT_MASK(power_well_id);
|
|
state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
|
|
PUNIT_PWRGT_PWR_GATE(power_well_id);
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
|
|
#define COND \
|
|
((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
|
|
|
|
if (COND)
|
|
goto out;
|
|
|
|
ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
|
|
ctrl &= ~mask;
|
|
ctrl |= state;
|
|
vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
|
|
|
|
if (wait_for(COND, 100))
|
|
DRM_ERROR("timeout setting power well state %08x (%08x)\n",
|
|
state,
|
|
vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
|
|
|
|
#undef COND
|
|
|
|
out:
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
}
|
|
|
|
static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
vlv_set_power_well(dev_priv, power_well, power_well->count > 0);
|
|
}
|
|
|
|
static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
vlv_set_power_well(dev_priv, power_well, true);
|
|
}
|
|
|
|
static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
vlv_set_power_well(dev_priv, power_well, false);
|
|
}
|
|
|
|
static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
int power_well_id = power_well->data;
|
|
bool enabled = false;
|
|
u32 mask;
|
|
u32 state;
|
|
u32 ctrl;
|
|
|
|
mask = PUNIT_PWRGT_MASK(power_well_id);
|
|
ctrl = PUNIT_PWRGT_PWR_ON(power_well_id);
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
|
|
state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
|
|
/*
|
|
* We only ever set the power-on and power-gate states, anything
|
|
* else is unexpected.
|
|
*/
|
|
WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) &&
|
|
state != PUNIT_PWRGT_PWR_GATE(power_well_id));
|
|
if (state == ctrl)
|
|
enabled = true;
|
|
|
|
/*
|
|
* A transient state at this point would mean some unexpected party
|
|
* is poking at the power controls too.
|
|
*/
|
|
ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
|
|
WARN_ON(ctrl != state);
|
|
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
|
|
return enabled;
|
|
}
|
|
|
|
static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
|
|
|
|
/*
|
|
* Disable trickle feed and enable pnd deadline calculation
|
|
*/
|
|
I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
|
|
I915_WRITE(CBR1_VLV, 0);
|
|
|
|
WARN_ON(dev_priv->rawclk_freq == 0);
|
|
|
|
I915_WRITE(RAWCLK_FREQ_VLV,
|
|
DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 1000));
|
|
}
|
|
|
|
static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
|
|
{
|
|
enum pipe pipe;
|
|
|
|
/*
|
|
* Enable the CRI clock source so we can get at the
|
|
* display and the reference clock for VGA
|
|
* hotplug / manual detection. Supposedly DSI also
|
|
* needs the ref clock up and running.
|
|
*
|
|
* CHV DPLL B/C have some issues if VGA mode is enabled.
|
|
*/
|
|
for_each_pipe(&dev_priv->drm, pipe) {
|
|
u32 val = I915_READ(DPLL(pipe));
|
|
|
|
val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
|
|
if (pipe != PIPE_A)
|
|
val |= DPLL_INTEGRATED_CRI_CLK_VLV;
|
|
|
|
I915_WRITE(DPLL(pipe), val);
|
|
}
|
|
|
|
vlv_init_display_clock_gating(dev_priv);
|
|
|
|
spin_lock_irq(&dev_priv->irq_lock);
|
|
valleyview_enable_display_irqs(dev_priv);
|
|
spin_unlock_irq(&dev_priv->irq_lock);
|
|
|
|
/*
|
|
* During driver initialization/resume we can avoid restoring the
|
|
* part of the HW/SW state that will be inited anyway explicitly.
|
|
*/
|
|
if (dev_priv->power_domains.initializing)
|
|
return;
|
|
|
|
intel_hpd_init(dev_priv);
|
|
|
|
i915_redisable_vga_power_on(&dev_priv->drm);
|
|
}
|
|
|
|
static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv)
|
|
{
|
|
spin_lock_irq(&dev_priv->irq_lock);
|
|
valleyview_disable_display_irqs(dev_priv);
|
|
spin_unlock_irq(&dev_priv->irq_lock);
|
|
|
|
/* make sure we're done processing display irqs */
|
|
synchronize_irq(dev_priv->drm.irq);
|
|
|
|
intel_power_sequencer_reset(dev_priv);
|
|
}
|
|
|
|
static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
|
|
|
|
vlv_set_power_well(dev_priv, power_well, true);
|
|
|
|
vlv_display_power_well_init(dev_priv);
|
|
}
|
|
|
|
static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
|
|
|
|
vlv_display_power_well_deinit(dev_priv);
|
|
|
|
vlv_set_power_well(dev_priv, power_well, false);
|
|
}
|
|
|
|
static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
|
|
|
|
/* since ref/cri clock was enabled */
|
|
udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
|
|
|
|
vlv_set_power_well(dev_priv, power_well, true);
|
|
|
|
/*
|
|
* From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
|
|
* 6. De-assert cmn_reset/side_reset. Same as VLV X0.
|
|
* a. GUnit 0x2110 bit[0] set to 1 (def 0)
|
|
* b. The other bits such as sfr settings / modesel may all
|
|
* be set to 0.
|
|
*
|
|
* This should only be done on init and resume from S3 with
|
|
* both PLLs disabled, or we risk losing DPIO and PLL
|
|
* synchronization.
|
|
*/
|
|
I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
|
|
}
|
|
|
|
static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
enum pipe pipe;
|
|
|
|
WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
|
|
|
|
for_each_pipe(dev_priv, pipe)
|
|
assert_pll_disabled(dev_priv, pipe);
|
|
|
|
/* Assert common reset */
|
|
I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
|
|
|
|
vlv_set_power_well(dev_priv, power_well, false);
|
|
}
|
|
|
|
#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
|
|
|
|
static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
|
|
int power_well_id)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
int i;
|
|
|
|
for (i = 0; i < power_domains->power_well_count; i++) {
|
|
struct i915_power_well *power_well;
|
|
|
|
power_well = &power_domains->power_wells[i];
|
|
if (power_well->data == power_well_id)
|
|
return power_well;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
#define BITS_SET(val, bits) (((val) & (bits)) == (bits))
|
|
|
|
static void assert_chv_phy_status(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct i915_power_well *cmn_bc =
|
|
lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
|
|
struct i915_power_well *cmn_d =
|
|
lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D);
|
|
u32 phy_control = dev_priv->chv_phy_control;
|
|
u32 phy_status = 0;
|
|
u32 phy_status_mask = 0xffffffff;
|
|
|
|
/*
|
|
* The BIOS can leave the PHY is some weird state
|
|
* where it doesn't fully power down some parts.
|
|
* Disable the asserts until the PHY has been fully
|
|
* reset (ie. the power well has been disabled at
|
|
* least once).
|
|
*/
|
|
if (!dev_priv->chv_phy_assert[DPIO_PHY0])
|
|
phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) |
|
|
PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) |
|
|
PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) |
|
|
PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) |
|
|
PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) |
|
|
PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1));
|
|
|
|
if (!dev_priv->chv_phy_assert[DPIO_PHY1])
|
|
phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) |
|
|
PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) |
|
|
PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1));
|
|
|
|
if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) {
|
|
phy_status |= PHY_POWERGOOD(DPIO_PHY0);
|
|
|
|
/* this assumes override is only used to enable lanes */
|
|
if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0)
|
|
phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0);
|
|
|
|
if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0)
|
|
phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1);
|
|
|
|
/* CL1 is on whenever anything is on in either channel */
|
|
if (BITS_SET(phy_control,
|
|
PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) |
|
|
PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)))
|
|
phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0);
|
|
|
|
/*
|
|
* The DPLLB check accounts for the pipe B + port A usage
|
|
* with CL2 powered up but all the lanes in the second channel
|
|
* powered down.
|
|
*/
|
|
if (BITS_SET(phy_control,
|
|
PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) &&
|
|
(I915_READ(DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0)
|
|
phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1);
|
|
|
|
if (BITS_SET(phy_control,
|
|
PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0)))
|
|
phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0);
|
|
if (BITS_SET(phy_control,
|
|
PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0)))
|
|
phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1);
|
|
|
|
if (BITS_SET(phy_control,
|
|
PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1)))
|
|
phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0);
|
|
if (BITS_SET(phy_control,
|
|
PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1)))
|
|
phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1);
|
|
}
|
|
|
|
if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) {
|
|
phy_status |= PHY_POWERGOOD(DPIO_PHY1);
|
|
|
|
/* this assumes override is only used to enable lanes */
|
|
if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0)
|
|
phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0);
|
|
|
|
if (BITS_SET(phy_control,
|
|
PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0)))
|
|
phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0);
|
|
|
|
if (BITS_SET(phy_control,
|
|
PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0)))
|
|
phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0);
|
|
if (BITS_SET(phy_control,
|
|
PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0)))
|
|
phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1);
|
|
}
|
|
|
|
phy_status &= phy_status_mask;
|
|
|
|
/*
|
|
* The PHY may be busy with some initial calibration and whatnot,
|
|
* so the power state can take a while to actually change.
|
|
*/
|
|
if (intel_wait_for_register(dev_priv,
|
|
DISPLAY_PHY_STATUS,
|
|
phy_status_mask,
|
|
phy_status,
|
|
10))
|
|
DRM_ERROR("Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
|
|
I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask,
|
|
phy_status, dev_priv->chv_phy_control);
|
|
}
|
|
|
|
#undef BITS_SET
|
|
|
|
static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
enum dpio_phy phy;
|
|
enum pipe pipe;
|
|
uint32_t tmp;
|
|
|
|
WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
|
|
power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
|
|
|
|
if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
|
|
pipe = PIPE_A;
|
|
phy = DPIO_PHY0;
|
|
} else {
|
|
pipe = PIPE_C;
|
|
phy = DPIO_PHY1;
|
|
}
|
|
|
|
/* since ref/cri clock was enabled */
|
|
udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
|
|
vlv_set_power_well(dev_priv, power_well, true);
|
|
|
|
/* Poll for phypwrgood signal */
|
|
if (intel_wait_for_register(dev_priv,
|
|
DISPLAY_PHY_STATUS,
|
|
PHY_POWERGOOD(phy),
|
|
PHY_POWERGOOD(phy),
|
|
1))
|
|
DRM_ERROR("Display PHY %d is not power up\n", phy);
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
|
|
/* Enable dynamic power down */
|
|
tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28);
|
|
tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN |
|
|
DPIO_SUS_CLK_CONFIG_GATE_CLKREQ;
|
|
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp);
|
|
|
|
if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
|
|
tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1);
|
|
tmp |= DPIO_DYNPWRDOWNEN_CH1;
|
|
vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp);
|
|
} else {
|
|
/*
|
|
* Force the non-existing CL2 off. BXT does this
|
|
* too, so maybe it saves some power even though
|
|
* CL2 doesn't exist?
|
|
*/
|
|
tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30);
|
|
tmp |= DPIO_CL2_LDOFUSE_PWRENB;
|
|
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp);
|
|
}
|
|
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy);
|
|
I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
|
|
|
|
DRM_DEBUG_KMS("Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
|
|
phy, dev_priv->chv_phy_control);
|
|
|
|
assert_chv_phy_status(dev_priv);
|
|
}
|
|
|
|
static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
enum dpio_phy phy;
|
|
|
|
WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
|
|
power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
|
|
|
|
if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
|
|
phy = DPIO_PHY0;
|
|
assert_pll_disabled(dev_priv, PIPE_A);
|
|
assert_pll_disabled(dev_priv, PIPE_B);
|
|
} else {
|
|
phy = DPIO_PHY1;
|
|
assert_pll_disabled(dev_priv, PIPE_C);
|
|
}
|
|
|
|
dev_priv->chv_phy_control &= ~PHY_COM_LANE_RESET_DEASSERT(phy);
|
|
I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
|
|
|
|
vlv_set_power_well(dev_priv, power_well, false);
|
|
|
|
DRM_DEBUG_KMS("Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
|
|
phy, dev_priv->chv_phy_control);
|
|
|
|
/* PHY is fully reset now, so we can enable the PHY state asserts */
|
|
dev_priv->chv_phy_assert[phy] = true;
|
|
|
|
assert_chv_phy_status(dev_priv);
|
|
}
|
|
|
|
static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy,
|
|
enum dpio_channel ch, bool override, unsigned int mask)
|
|
{
|
|
enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C;
|
|
u32 reg, val, expected, actual;
|
|
|
|
/*
|
|
* The BIOS can leave the PHY is some weird state
|
|
* where it doesn't fully power down some parts.
|
|
* Disable the asserts until the PHY has been fully
|
|
* reset (ie. the power well has been disabled at
|
|
* least once).
|
|
*/
|
|
if (!dev_priv->chv_phy_assert[phy])
|
|
return;
|
|
|
|
if (ch == DPIO_CH0)
|
|
reg = _CHV_CMN_DW0_CH0;
|
|
else
|
|
reg = _CHV_CMN_DW6_CH1;
|
|
|
|
mutex_lock(&dev_priv->sb_lock);
|
|
val = vlv_dpio_read(dev_priv, pipe, reg);
|
|
mutex_unlock(&dev_priv->sb_lock);
|
|
|
|
/*
|
|
* This assumes !override is only used when the port is disabled.
|
|
* All lanes should power down even without the override when
|
|
* the port is disabled.
|
|
*/
|
|
if (!override || mask == 0xf) {
|
|
expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
|
|
/*
|
|
* If CH1 common lane is not active anymore
|
|
* (eg. for pipe B DPLL) the entire channel will
|
|
* shut down, which causes the common lane registers
|
|
* to read as 0. That means we can't actually check
|
|
* the lane power down status bits, but as the entire
|
|
* register reads as 0 it's a good indication that the
|
|
* channel is indeed entirely powered down.
|
|
*/
|
|
if (ch == DPIO_CH1 && val == 0)
|
|
expected = 0;
|
|
} else if (mask != 0x0) {
|
|
expected = DPIO_ANYDL_POWERDOWN;
|
|
} else {
|
|
expected = 0;
|
|
}
|
|
|
|
if (ch == DPIO_CH0)
|
|
actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0;
|
|
else
|
|
actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1;
|
|
actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
|
|
|
|
WARN(actual != expected,
|
|
"Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n",
|
|
!!(actual & DPIO_ALLDL_POWERDOWN), !!(actual & DPIO_ANYDL_POWERDOWN),
|
|
!!(expected & DPIO_ALLDL_POWERDOWN), !!(expected & DPIO_ANYDL_POWERDOWN),
|
|
reg, val);
|
|
}
|
|
|
|
bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
|
|
enum dpio_channel ch, bool override)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
bool was_override;
|
|
|
|
mutex_lock(&power_domains->lock);
|
|
|
|
was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
|
|
|
|
if (override == was_override)
|
|
goto out;
|
|
|
|
if (override)
|
|
dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
|
|
else
|
|
dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
|
|
|
|
I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
|
|
|
|
DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n",
|
|
phy, ch, dev_priv->chv_phy_control);
|
|
|
|
assert_chv_phy_status(dev_priv);
|
|
|
|
out:
|
|
mutex_unlock(&power_domains->lock);
|
|
|
|
return was_override;
|
|
}
|
|
|
|
void chv_phy_powergate_lanes(struct intel_encoder *encoder,
|
|
bool override, unsigned int mask)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
enum dpio_phy phy = vlv_dport_to_phy(enc_to_dig_port(&encoder->base));
|
|
enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base));
|
|
|
|
mutex_lock(&power_domains->lock);
|
|
|
|
dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch);
|
|
dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch);
|
|
|
|
if (override)
|
|
dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
|
|
else
|
|
dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
|
|
|
|
I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
|
|
|
|
DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n",
|
|
phy, ch, mask, dev_priv->chv_phy_control);
|
|
|
|
assert_chv_phy_status(dev_priv);
|
|
|
|
assert_chv_phy_powergate(dev_priv, phy, ch, override, mask);
|
|
|
|
mutex_unlock(&power_domains->lock);
|
|
}
|
|
|
|
static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
enum pipe pipe = power_well->data;
|
|
bool enabled;
|
|
u32 state, ctrl;
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
|
|
state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe);
|
|
/*
|
|
* We only ever set the power-on and power-gate states, anything
|
|
* else is unexpected.
|
|
*/
|
|
WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe));
|
|
enabled = state == DP_SSS_PWR_ON(pipe);
|
|
|
|
/*
|
|
* A transient state at this point would mean some unexpected party
|
|
* is poking at the power controls too.
|
|
*/
|
|
ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe);
|
|
WARN_ON(ctrl << 16 != state);
|
|
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
|
|
return enabled;
|
|
}
|
|
|
|
static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well,
|
|
bool enable)
|
|
{
|
|
enum pipe pipe = power_well->data;
|
|
u32 state;
|
|
u32 ctrl;
|
|
|
|
state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
|
|
#define COND \
|
|
((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state)
|
|
|
|
if (COND)
|
|
goto out;
|
|
|
|
ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
|
|
ctrl &= ~DP_SSC_MASK(pipe);
|
|
ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
|
|
vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl);
|
|
|
|
if (wait_for(COND, 100))
|
|
DRM_ERROR("timeout setting power well state %08x (%08x)\n",
|
|
state,
|
|
vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
|
|
|
|
#undef COND
|
|
|
|
out:
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
}
|
|
|
|
static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
WARN_ON_ONCE(power_well->data != PIPE_A);
|
|
|
|
chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0);
|
|
}
|
|
|
|
static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
WARN_ON_ONCE(power_well->data != PIPE_A);
|
|
|
|
chv_set_pipe_power_well(dev_priv, power_well, true);
|
|
|
|
vlv_display_power_well_init(dev_priv);
|
|
}
|
|
|
|
static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well)
|
|
{
|
|
WARN_ON_ONCE(power_well->data != PIPE_A);
|
|
|
|
vlv_display_power_well_deinit(dev_priv);
|
|
|
|
chv_set_pipe_power_well(dev_priv, power_well, false);
|
|
}
|
|
|
|
static void
|
|
__intel_display_power_get_domain(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
struct i915_power_well *power_well;
|
|
int i;
|
|
|
|
for_each_power_well(i, power_well, BIT(domain), power_domains)
|
|
intel_power_well_get(dev_priv, power_well);
|
|
|
|
power_domains->domain_use_count[domain]++;
|
|
}
|
|
|
|
/**
|
|
* intel_display_power_get - grab a power domain reference
|
|
* @dev_priv: i915 device instance
|
|
* @domain: power domain to reference
|
|
*
|
|
* This function grabs a power domain reference for @domain and ensures that the
|
|
* power domain and all its parents are powered up. Therefore users should only
|
|
* grab a reference to the innermost power domain they need.
|
|
*
|
|
* Any power domain reference obtained by this function must have a symmetric
|
|
* call to intel_display_power_put() to release the reference again.
|
|
*/
|
|
void intel_display_power_get(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
|
|
intel_runtime_pm_get(dev_priv);
|
|
|
|
mutex_lock(&power_domains->lock);
|
|
|
|
__intel_display_power_get_domain(dev_priv, domain);
|
|
|
|
mutex_unlock(&power_domains->lock);
|
|
}
|
|
|
|
/**
|
|
* intel_display_power_get_if_enabled - grab a reference for an enabled display power domain
|
|
* @dev_priv: i915 device instance
|
|
* @domain: power domain to reference
|
|
*
|
|
* This function grabs a power domain reference for @domain and ensures that the
|
|
* power domain and all its parents are powered up. Therefore users should only
|
|
* grab a reference to the innermost power domain they need.
|
|
*
|
|
* Any power domain reference obtained by this function must have a symmetric
|
|
* call to intel_display_power_put() to release the reference again.
|
|
*/
|
|
bool intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
bool is_enabled;
|
|
|
|
if (!intel_runtime_pm_get_if_in_use(dev_priv))
|
|
return false;
|
|
|
|
mutex_lock(&power_domains->lock);
|
|
|
|
if (__intel_display_power_is_enabled(dev_priv, domain)) {
|
|
__intel_display_power_get_domain(dev_priv, domain);
|
|
is_enabled = true;
|
|
} else {
|
|
is_enabled = false;
|
|
}
|
|
|
|
mutex_unlock(&power_domains->lock);
|
|
|
|
if (!is_enabled)
|
|
intel_runtime_pm_put(dev_priv);
|
|
|
|
return is_enabled;
|
|
}
|
|
|
|
/**
|
|
* intel_display_power_put - release a power domain reference
|
|
* @dev_priv: i915 device instance
|
|
* @domain: power domain to reference
|
|
*
|
|
* This function drops the power domain reference obtained by
|
|
* intel_display_power_get() and might power down the corresponding hardware
|
|
* block right away if this is the last reference.
|
|
*/
|
|
void intel_display_power_put(struct drm_i915_private *dev_priv,
|
|
enum intel_display_power_domain domain)
|
|
{
|
|
struct i915_power_domains *power_domains;
|
|
struct i915_power_well *power_well;
|
|
int i;
|
|
|
|
power_domains = &dev_priv->power_domains;
|
|
|
|
mutex_lock(&power_domains->lock);
|
|
|
|
WARN(!power_domains->domain_use_count[domain],
|
|
"Use count on domain %s is already zero\n",
|
|
intel_display_power_domain_str(domain));
|
|
power_domains->domain_use_count[domain]--;
|
|
|
|
for_each_power_well_rev(i, power_well, BIT(domain), power_domains)
|
|
intel_power_well_put(dev_priv, power_well);
|
|
|
|
mutex_unlock(&power_domains->lock);
|
|
|
|
intel_runtime_pm_put(dev_priv);
|
|
}
|
|
|
|
#define HSW_DISPLAY_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PIPE_B) | \
|
|
BIT(POWER_DOMAIN_PIPE_C) | \
|
|
BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_A) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_B) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_C) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_CRT) | /* DDI E */ \
|
|
BIT(POWER_DOMAIN_VGA) | \
|
|
BIT(POWER_DOMAIN_AUDIO) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define BDW_DISPLAY_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PIPE_B) | \
|
|
BIT(POWER_DOMAIN_PIPE_C) | \
|
|
BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_A) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_B) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_C) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_CRT) | /* DDI E */ \
|
|
BIT(POWER_DOMAIN_VGA) | \
|
|
BIT(POWER_DOMAIN_AUDIO) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define VLV_DISPLAY_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PIPE_A) | \
|
|
BIT(POWER_DOMAIN_PIPE_B) | \
|
|
BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_A) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_B) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DSI) | \
|
|
BIT(POWER_DOMAIN_PORT_CRT) | \
|
|
BIT(POWER_DOMAIN_VGA) | \
|
|
BIT(POWER_DOMAIN_AUDIO) | \
|
|
BIT(POWER_DOMAIN_AUX_B) | \
|
|
BIT(POWER_DOMAIN_AUX_C) | \
|
|
BIT(POWER_DOMAIN_GMBUS) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_CRT) | \
|
|
BIT(POWER_DOMAIN_AUX_B) | \
|
|
BIT(POWER_DOMAIN_AUX_C) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_B) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_B) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_C) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_C) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define CHV_DISPLAY_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PIPE_A) | \
|
|
BIT(POWER_DOMAIN_PIPE_B) | \
|
|
BIT(POWER_DOMAIN_PIPE_C) | \
|
|
BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_A) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_B) | \
|
|
BIT(POWER_DOMAIN_TRANSCODER_C) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DSI) | \
|
|
BIT(POWER_DOMAIN_VGA) | \
|
|
BIT(POWER_DOMAIN_AUDIO) | \
|
|
BIT(POWER_DOMAIN_AUX_B) | \
|
|
BIT(POWER_DOMAIN_AUX_C) | \
|
|
BIT(POWER_DOMAIN_AUX_D) | \
|
|
BIT(POWER_DOMAIN_GMBUS) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \
|
|
BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_B) | \
|
|
BIT(POWER_DOMAIN_AUX_C) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
#define CHV_DPIO_CMN_D_POWER_DOMAINS ( \
|
|
BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \
|
|
BIT(POWER_DOMAIN_AUX_D) | \
|
|
BIT(POWER_DOMAIN_INIT))
|
|
|
|
static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
|
|
.sync_hw = i9xx_always_on_power_well_noop,
|
|
.enable = i9xx_always_on_power_well_noop,
|
|
.disable = i9xx_always_on_power_well_noop,
|
|
.is_enabled = i9xx_always_on_power_well_enabled,
|
|
};
|
|
|
|
static const struct i915_power_well_ops chv_pipe_power_well_ops = {
|
|
.sync_hw = chv_pipe_power_well_sync_hw,
|
|
.enable = chv_pipe_power_well_enable,
|
|
.disable = chv_pipe_power_well_disable,
|
|
.is_enabled = chv_pipe_power_well_enabled,
|
|
};
|
|
|
|
static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
|
|
.sync_hw = vlv_power_well_sync_hw,
|
|
.enable = chv_dpio_cmn_power_well_enable,
|
|
.disable = chv_dpio_cmn_power_well_disable,
|
|
.is_enabled = vlv_power_well_enabled,
|
|
};
|
|
|
|
static struct i915_power_well i9xx_always_on_power_well[] = {
|
|
{
|
|
.name = "always-on",
|
|
.always_on = 1,
|
|
.domains = POWER_DOMAIN_MASK,
|
|
.ops = &i9xx_always_on_power_well_ops,
|
|
},
|
|
};
|
|
|
|
static const struct i915_power_well_ops hsw_power_well_ops = {
|
|
.sync_hw = hsw_power_well_sync_hw,
|
|
.enable = hsw_power_well_enable,
|
|
.disable = hsw_power_well_disable,
|
|
.is_enabled = hsw_power_well_enabled,
|
|
};
|
|
|
|
static const struct i915_power_well_ops skl_power_well_ops = {
|
|
.sync_hw = skl_power_well_sync_hw,
|
|
.enable = skl_power_well_enable,
|
|
.disable = skl_power_well_disable,
|
|
.is_enabled = skl_power_well_enabled,
|
|
};
|
|
|
|
static const struct i915_power_well_ops gen9_dc_off_power_well_ops = {
|
|
.sync_hw = gen9_dc_off_power_well_sync_hw,
|
|
.enable = gen9_dc_off_power_well_enable,
|
|
.disable = gen9_dc_off_power_well_disable,
|
|
.is_enabled = gen9_dc_off_power_well_enabled,
|
|
};
|
|
|
|
static const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = {
|
|
.sync_hw = bxt_dpio_cmn_power_well_sync_hw,
|
|
.enable = bxt_dpio_cmn_power_well_enable,
|
|
.disable = bxt_dpio_cmn_power_well_disable,
|
|
.is_enabled = bxt_dpio_cmn_power_well_enabled,
|
|
};
|
|
|
|
static struct i915_power_well hsw_power_wells[] = {
|
|
{
|
|
.name = "always-on",
|
|
.always_on = 1,
|
|
.domains = POWER_DOMAIN_MASK,
|
|
.ops = &i9xx_always_on_power_well_ops,
|
|
},
|
|
{
|
|
.name = "display",
|
|
.domains = HSW_DISPLAY_POWER_DOMAINS,
|
|
.ops = &hsw_power_well_ops,
|
|
},
|
|
};
|
|
|
|
static struct i915_power_well bdw_power_wells[] = {
|
|
{
|
|
.name = "always-on",
|
|
.always_on = 1,
|
|
.domains = POWER_DOMAIN_MASK,
|
|
.ops = &i9xx_always_on_power_well_ops,
|
|
},
|
|
{
|
|
.name = "display",
|
|
.domains = BDW_DISPLAY_POWER_DOMAINS,
|
|
.ops = &hsw_power_well_ops,
|
|
},
|
|
};
|
|
|
|
static const struct i915_power_well_ops vlv_display_power_well_ops = {
|
|
.sync_hw = vlv_power_well_sync_hw,
|
|
.enable = vlv_display_power_well_enable,
|
|
.disable = vlv_display_power_well_disable,
|
|
.is_enabled = vlv_power_well_enabled,
|
|
};
|
|
|
|
static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
|
|
.sync_hw = vlv_power_well_sync_hw,
|
|
.enable = vlv_dpio_cmn_power_well_enable,
|
|
.disable = vlv_dpio_cmn_power_well_disable,
|
|
.is_enabled = vlv_power_well_enabled,
|
|
};
|
|
|
|
static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
|
|
.sync_hw = vlv_power_well_sync_hw,
|
|
.enable = vlv_power_well_enable,
|
|
.disable = vlv_power_well_disable,
|
|
.is_enabled = vlv_power_well_enabled,
|
|
};
|
|
|
|
static struct i915_power_well vlv_power_wells[] = {
|
|
{
|
|
.name = "always-on",
|
|
.always_on = 1,
|
|
.domains = POWER_DOMAIN_MASK,
|
|
.ops = &i9xx_always_on_power_well_ops,
|
|
.data = PUNIT_POWER_WELL_ALWAYS_ON,
|
|
},
|
|
{
|
|
.name = "display",
|
|
.domains = VLV_DISPLAY_POWER_DOMAINS,
|
|
.data = PUNIT_POWER_WELL_DISP2D,
|
|
.ops = &vlv_display_power_well_ops,
|
|
},
|
|
{
|
|
.name = "dpio-tx-b-01",
|
|
.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
|
|
VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
|
|
VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
|
|
VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
|
|
.ops = &vlv_dpio_power_well_ops,
|
|
.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
|
|
},
|
|
{
|
|
.name = "dpio-tx-b-23",
|
|
.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
|
|
VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
|
|
VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
|
|
VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
|
|
.ops = &vlv_dpio_power_well_ops,
|
|
.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
|
|
},
|
|
{
|
|
.name = "dpio-tx-c-01",
|
|
.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
|
|
VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
|
|
VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
|
|
VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
|
|
.ops = &vlv_dpio_power_well_ops,
|
|
.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
|
|
},
|
|
{
|
|
.name = "dpio-tx-c-23",
|
|
.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
|
|
VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
|
|
VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
|
|
VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
|
|
.ops = &vlv_dpio_power_well_ops,
|
|
.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
|
|
},
|
|
{
|
|
.name = "dpio-common",
|
|
.domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
|
|
.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
|
|
.ops = &vlv_dpio_cmn_power_well_ops,
|
|
},
|
|
};
|
|
|
|
static struct i915_power_well chv_power_wells[] = {
|
|
{
|
|
.name = "always-on",
|
|
.always_on = 1,
|
|
.domains = POWER_DOMAIN_MASK,
|
|
.ops = &i9xx_always_on_power_well_ops,
|
|
},
|
|
{
|
|
.name = "display",
|
|
/*
|
|
* Pipe A power well is the new disp2d well. Pipe B and C
|
|
* power wells don't actually exist. Pipe A power well is
|
|
* required for any pipe to work.
|
|
*/
|
|
.domains = CHV_DISPLAY_POWER_DOMAINS,
|
|
.data = PIPE_A,
|
|
.ops = &chv_pipe_power_well_ops,
|
|
},
|
|
{
|
|
.name = "dpio-common-bc",
|
|
.domains = CHV_DPIO_CMN_BC_POWER_DOMAINS,
|
|
.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
|
|
.ops = &chv_dpio_cmn_power_well_ops,
|
|
},
|
|
{
|
|
.name = "dpio-common-d",
|
|
.domains = CHV_DPIO_CMN_D_POWER_DOMAINS,
|
|
.data = PUNIT_POWER_WELL_DPIO_CMN_D,
|
|
.ops = &chv_dpio_cmn_power_well_ops,
|
|
},
|
|
};
|
|
|
|
bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
|
|
int power_well_id)
|
|
{
|
|
struct i915_power_well *power_well;
|
|
bool ret;
|
|
|
|
power_well = lookup_power_well(dev_priv, power_well_id);
|
|
ret = power_well->ops->is_enabled(dev_priv, power_well);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct i915_power_well skl_power_wells[] = {
|
|
{
|
|
.name = "always-on",
|
|
.always_on = 1,
|
|
.domains = POWER_DOMAIN_MASK,
|
|
.ops = &i9xx_always_on_power_well_ops,
|
|
.data = SKL_DISP_PW_ALWAYS_ON,
|
|
},
|
|
{
|
|
.name = "power well 1",
|
|
/* Handled by the DMC firmware */
|
|
.domains = 0,
|
|
.ops = &skl_power_well_ops,
|
|
.data = SKL_DISP_PW_1,
|
|
},
|
|
{
|
|
.name = "MISC IO power well",
|
|
/* Handled by the DMC firmware */
|
|
.domains = 0,
|
|
.ops = &skl_power_well_ops,
|
|
.data = SKL_DISP_PW_MISC_IO,
|
|
},
|
|
{
|
|
.name = "DC off",
|
|
.domains = SKL_DISPLAY_DC_OFF_POWER_DOMAINS,
|
|
.ops = &gen9_dc_off_power_well_ops,
|
|
.data = SKL_DISP_PW_DC_OFF,
|
|
},
|
|
{
|
|
.name = "power well 2",
|
|
.domains = SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
|
|
.ops = &skl_power_well_ops,
|
|
.data = SKL_DISP_PW_2,
|
|
},
|
|
{
|
|
.name = "DDI A/E power well",
|
|
.domains = SKL_DISPLAY_DDI_A_E_POWER_DOMAINS,
|
|
.ops = &skl_power_well_ops,
|
|
.data = SKL_DISP_PW_DDI_A_E,
|
|
},
|
|
{
|
|
.name = "DDI B power well",
|
|
.domains = SKL_DISPLAY_DDI_B_POWER_DOMAINS,
|
|
.ops = &skl_power_well_ops,
|
|
.data = SKL_DISP_PW_DDI_B,
|
|
},
|
|
{
|
|
.name = "DDI C power well",
|
|
.domains = SKL_DISPLAY_DDI_C_POWER_DOMAINS,
|
|
.ops = &skl_power_well_ops,
|
|
.data = SKL_DISP_PW_DDI_C,
|
|
},
|
|
{
|
|
.name = "DDI D power well",
|
|
.domains = SKL_DISPLAY_DDI_D_POWER_DOMAINS,
|
|
.ops = &skl_power_well_ops,
|
|
.data = SKL_DISP_PW_DDI_D,
|
|
},
|
|
};
|
|
|
|
static struct i915_power_well bxt_power_wells[] = {
|
|
{
|
|
.name = "always-on",
|
|
.always_on = 1,
|
|
.domains = POWER_DOMAIN_MASK,
|
|
.ops = &i9xx_always_on_power_well_ops,
|
|
},
|
|
{
|
|
.name = "power well 1",
|
|
.domains = 0,
|
|
.ops = &skl_power_well_ops,
|
|
.data = SKL_DISP_PW_1,
|
|
},
|
|
{
|
|
.name = "DC off",
|
|
.domains = BXT_DISPLAY_DC_OFF_POWER_DOMAINS,
|
|
.ops = &gen9_dc_off_power_well_ops,
|
|
.data = SKL_DISP_PW_DC_OFF,
|
|
},
|
|
{
|
|
.name = "power well 2",
|
|
.domains = BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS,
|
|
.ops = &skl_power_well_ops,
|
|
.data = SKL_DISP_PW_2,
|
|
},
|
|
{
|
|
.name = "dpio-common-a",
|
|
.domains = BXT_DPIO_CMN_A_POWER_DOMAINS,
|
|
.ops = &bxt_dpio_cmn_power_well_ops,
|
|
.data = BXT_DPIO_CMN_A,
|
|
},
|
|
{
|
|
.name = "dpio-common-bc",
|
|
.domains = BXT_DPIO_CMN_BC_POWER_DOMAINS,
|
|
.ops = &bxt_dpio_cmn_power_well_ops,
|
|
.data = BXT_DPIO_CMN_BC,
|
|
},
|
|
};
|
|
|
|
static int
|
|
sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv,
|
|
int disable_power_well)
|
|
{
|
|
if (disable_power_well >= 0)
|
|
return !!disable_power_well;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static uint32_t get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
|
|
int enable_dc)
|
|
{
|
|
uint32_t mask;
|
|
int requested_dc;
|
|
int max_dc;
|
|
|
|
if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
|
|
max_dc = 2;
|
|
mask = 0;
|
|
} else if (IS_BROXTON(dev_priv)) {
|
|
max_dc = 1;
|
|
/*
|
|
* DC9 has a separate HW flow from the rest of the DC states,
|
|
* not depending on the DMC firmware. It's needed by system
|
|
* suspend/resume, so allow it unconditionally.
|
|
*/
|
|
mask = DC_STATE_EN_DC9;
|
|
} else {
|
|
max_dc = 0;
|
|
mask = 0;
|
|
}
|
|
|
|
if (!i915.disable_power_well)
|
|
max_dc = 0;
|
|
|
|
if (enable_dc >= 0 && enable_dc <= max_dc) {
|
|
requested_dc = enable_dc;
|
|
} else if (enable_dc == -1) {
|
|
requested_dc = max_dc;
|
|
} else if (enable_dc > max_dc && enable_dc <= 2) {
|
|
DRM_DEBUG_KMS("Adjusting requested max DC state (%d->%d)\n",
|
|
enable_dc, max_dc);
|
|
requested_dc = max_dc;
|
|
} else {
|
|
DRM_ERROR("Unexpected value for enable_dc (%d)\n", enable_dc);
|
|
requested_dc = max_dc;
|
|
}
|
|
|
|
if (requested_dc > 1)
|
|
mask |= DC_STATE_EN_UPTO_DC6;
|
|
if (requested_dc > 0)
|
|
mask |= DC_STATE_EN_UPTO_DC5;
|
|
|
|
DRM_DEBUG_KMS("Allowed DC state mask %02x\n", mask);
|
|
|
|
return mask;
|
|
}
|
|
|
|
#define set_power_wells(power_domains, __power_wells) ({ \
|
|
(power_domains)->power_wells = (__power_wells); \
|
|
(power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \
|
|
})
|
|
|
|
/**
|
|
* intel_power_domains_init - initializes the power domain structures
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* Initializes the power domain structures for @dev_priv depending upon the
|
|
* supported platform.
|
|
*/
|
|
int intel_power_domains_init(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
|
|
i915.disable_power_well = sanitize_disable_power_well_option(dev_priv,
|
|
i915.disable_power_well);
|
|
dev_priv->csr.allowed_dc_mask = get_allowed_dc_mask(dev_priv,
|
|
i915.enable_dc);
|
|
|
|
BUILD_BUG_ON(POWER_DOMAIN_NUM > 31);
|
|
|
|
mutex_init(&power_domains->lock);
|
|
|
|
/*
|
|
* The enabling order will be from lower to higher indexed wells,
|
|
* the disabling order is reversed.
|
|
*/
|
|
if (IS_HASWELL(dev_priv)) {
|
|
set_power_wells(power_domains, hsw_power_wells);
|
|
} else if (IS_BROADWELL(dev_priv)) {
|
|
set_power_wells(power_domains, bdw_power_wells);
|
|
} else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
|
|
set_power_wells(power_domains, skl_power_wells);
|
|
} else if (IS_BROXTON(dev_priv)) {
|
|
set_power_wells(power_domains, bxt_power_wells);
|
|
} else if (IS_CHERRYVIEW(dev_priv)) {
|
|
set_power_wells(power_domains, chv_power_wells);
|
|
} else if (IS_VALLEYVIEW(dev_priv)) {
|
|
set_power_wells(power_domains, vlv_power_wells);
|
|
} else {
|
|
set_power_wells(power_domains, i9xx_always_on_power_well);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* intel_power_domains_fini - finalizes the power domain structures
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* Finalizes the power domain structures for @dev_priv depending upon the
|
|
* supported platform. This function also disables runtime pm and ensures that
|
|
* the device stays powered up so that the driver can be reloaded.
|
|
*/
|
|
void intel_power_domains_fini(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct device *device = &dev_priv->drm.pdev->dev;
|
|
|
|
/*
|
|
* The i915.ko module is still not prepared to be loaded when
|
|
* the power well is not enabled, so just enable it in case
|
|
* we're going to unload/reload.
|
|
* The following also reacquires the RPM reference the core passed
|
|
* to the driver during loading, which is dropped in
|
|
* intel_runtime_pm_enable(). We have to hand back the control of the
|
|
* device to the core with this reference held.
|
|
*/
|
|
intel_display_set_init_power(dev_priv, true);
|
|
|
|
/* Remove the refcount we took to keep power well support disabled. */
|
|
if (!i915.disable_power_well)
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
|
|
|
|
/*
|
|
* Remove the refcount we took in intel_runtime_pm_enable() in case
|
|
* the platform doesn't support runtime PM.
|
|
*/
|
|
if (!HAS_RUNTIME_PM(dev_priv))
|
|
pm_runtime_put(device);
|
|
}
|
|
|
|
static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
struct i915_power_well *power_well;
|
|
int i;
|
|
|
|
mutex_lock(&power_domains->lock);
|
|
for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
|
|
power_well->ops->sync_hw(dev_priv, power_well);
|
|
power_well->hw_enabled = power_well->ops->is_enabled(dev_priv,
|
|
power_well);
|
|
}
|
|
mutex_unlock(&power_domains->lock);
|
|
}
|
|
|
|
static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
|
|
POSTING_READ(DBUF_CTL);
|
|
|
|
udelay(10);
|
|
|
|
if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
|
|
DRM_ERROR("DBuf power enable timeout\n");
|
|
}
|
|
|
|
static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
|
|
POSTING_READ(DBUF_CTL);
|
|
|
|
udelay(10);
|
|
|
|
if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
|
|
DRM_ERROR("DBuf power disable timeout!\n");
|
|
}
|
|
|
|
static void skl_display_core_init(struct drm_i915_private *dev_priv,
|
|
bool resume)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
struct i915_power_well *well;
|
|
uint32_t val;
|
|
|
|
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
|
|
|
|
/* enable PCH reset handshake */
|
|
val = I915_READ(HSW_NDE_RSTWRN_OPT);
|
|
I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
|
|
|
|
/* enable PG1 and Misc I/O */
|
|
mutex_lock(&power_domains->lock);
|
|
|
|
well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
|
|
intel_power_well_enable(dev_priv, well);
|
|
|
|
well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO);
|
|
intel_power_well_enable(dev_priv, well);
|
|
|
|
mutex_unlock(&power_domains->lock);
|
|
|
|
skl_init_cdclk(dev_priv);
|
|
|
|
gen9_dbuf_enable(dev_priv);
|
|
|
|
if (resume && dev_priv->csr.dmc_payload)
|
|
intel_csr_load_program(dev_priv);
|
|
}
|
|
|
|
static void skl_display_core_uninit(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
struct i915_power_well *well;
|
|
|
|
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
|
|
|
|
gen9_dbuf_disable(dev_priv);
|
|
|
|
skl_uninit_cdclk(dev_priv);
|
|
|
|
/* The spec doesn't call for removing the reset handshake flag */
|
|
/* disable PG1 and Misc I/O */
|
|
|
|
mutex_lock(&power_domains->lock);
|
|
|
|
well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO);
|
|
intel_power_well_disable(dev_priv, well);
|
|
|
|
well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
|
|
intel_power_well_disable(dev_priv, well);
|
|
|
|
mutex_unlock(&power_domains->lock);
|
|
}
|
|
|
|
void bxt_display_core_init(struct drm_i915_private *dev_priv,
|
|
bool resume)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
struct i915_power_well *well;
|
|
uint32_t val;
|
|
|
|
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
|
|
|
|
/*
|
|
* NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
|
|
* or else the reset will hang because there is no PCH to respond.
|
|
* Move the handshake programming to initialization sequence.
|
|
* Previously was left up to BIOS.
|
|
*/
|
|
val = I915_READ(HSW_NDE_RSTWRN_OPT);
|
|
val &= ~RESET_PCH_HANDSHAKE_ENABLE;
|
|
I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
|
|
|
|
/* Enable PG1 */
|
|
mutex_lock(&power_domains->lock);
|
|
|
|
well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
|
|
intel_power_well_enable(dev_priv, well);
|
|
|
|
mutex_unlock(&power_domains->lock);
|
|
|
|
bxt_init_cdclk(dev_priv);
|
|
|
|
gen9_dbuf_enable(dev_priv);
|
|
|
|
if (resume && dev_priv->csr.dmc_payload)
|
|
intel_csr_load_program(dev_priv);
|
|
}
|
|
|
|
void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
struct i915_power_well *well;
|
|
|
|
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
|
|
|
|
gen9_dbuf_disable(dev_priv);
|
|
|
|
bxt_uninit_cdclk(dev_priv);
|
|
|
|
/* The spec doesn't call for removing the reset handshake flag */
|
|
|
|
/* Disable PG1 */
|
|
mutex_lock(&power_domains->lock);
|
|
|
|
well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
|
|
intel_power_well_disable(dev_priv, well);
|
|
|
|
mutex_unlock(&power_domains->lock);
|
|
}
|
|
|
|
static void chv_phy_control_init(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct i915_power_well *cmn_bc =
|
|
lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
|
|
struct i915_power_well *cmn_d =
|
|
lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D);
|
|
|
|
/*
|
|
* DISPLAY_PHY_CONTROL can get corrupted if read. As a
|
|
* workaround never ever read DISPLAY_PHY_CONTROL, and
|
|
* instead maintain a shadow copy ourselves. Use the actual
|
|
* power well state and lane status to reconstruct the
|
|
* expected initial value.
|
|
*/
|
|
dev_priv->chv_phy_control =
|
|
PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY0) |
|
|
PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY1) |
|
|
PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH0) |
|
|
PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH1) |
|
|
PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY1, DPIO_CH0);
|
|
|
|
/*
|
|
* If all lanes are disabled we leave the override disabled
|
|
* with all power down bits cleared to match the state we
|
|
* would use after disabling the port. Otherwise enable the
|
|
* override and set the lane powerdown bits accding to the
|
|
* current lane status.
|
|
*/
|
|
if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) {
|
|
uint32_t status = I915_READ(DPLL(PIPE_A));
|
|
unsigned int mask;
|
|
|
|
mask = status & DPLL_PORTB_READY_MASK;
|
|
if (mask == 0xf)
|
|
mask = 0x0;
|
|
else
|
|
dev_priv->chv_phy_control |=
|
|
PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0);
|
|
|
|
dev_priv->chv_phy_control |=
|
|
PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH0);
|
|
|
|
mask = (status & DPLL_PORTC_READY_MASK) >> 4;
|
|
if (mask == 0xf)
|
|
mask = 0x0;
|
|
else
|
|
dev_priv->chv_phy_control |=
|
|
PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1);
|
|
|
|
dev_priv->chv_phy_control |=
|
|
PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH1);
|
|
|
|
dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY0);
|
|
|
|
dev_priv->chv_phy_assert[DPIO_PHY0] = false;
|
|
} else {
|
|
dev_priv->chv_phy_assert[DPIO_PHY0] = true;
|
|
}
|
|
|
|
if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) {
|
|
uint32_t status = I915_READ(DPIO_PHY_STATUS);
|
|
unsigned int mask;
|
|
|
|
mask = status & DPLL_PORTD_READY_MASK;
|
|
|
|
if (mask == 0xf)
|
|
mask = 0x0;
|
|
else
|
|
dev_priv->chv_phy_control |=
|
|
PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0);
|
|
|
|
dev_priv->chv_phy_control |=
|
|
PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY1, DPIO_CH0);
|
|
|
|
dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY1);
|
|
|
|
dev_priv->chv_phy_assert[DPIO_PHY1] = false;
|
|
} else {
|
|
dev_priv->chv_phy_assert[DPIO_PHY1] = true;
|
|
}
|
|
|
|
I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
|
|
|
|
DRM_DEBUG_KMS("Initial PHY_CONTROL=0x%08x\n",
|
|
dev_priv->chv_phy_control);
|
|
}
|
|
|
|
static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct i915_power_well *cmn =
|
|
lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
|
|
struct i915_power_well *disp2d =
|
|
lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D);
|
|
|
|
/* If the display might be already active skip this */
|
|
if (cmn->ops->is_enabled(dev_priv, cmn) &&
|
|
disp2d->ops->is_enabled(dev_priv, disp2d) &&
|
|
I915_READ(DPIO_CTL) & DPIO_CMNRST)
|
|
return;
|
|
|
|
DRM_DEBUG_KMS("toggling display PHY side reset\n");
|
|
|
|
/* cmnlane needs DPLL registers */
|
|
disp2d->ops->enable(dev_priv, disp2d);
|
|
|
|
/*
|
|
* From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx:
|
|
* Need to assert and de-assert PHY SB reset by gating the
|
|
* common lane power, then un-gating it.
|
|
* Simply ungating isn't enough to reset the PHY enough to get
|
|
* ports and lanes running.
|
|
*/
|
|
cmn->ops->disable(dev_priv, cmn);
|
|
}
|
|
|
|
/**
|
|
* intel_power_domains_init_hw - initialize hardware power domain state
|
|
* @dev_priv: i915 device instance
|
|
* @resume: Called from resume code paths or not
|
|
*
|
|
* This function initializes the hardware power domain state and enables all
|
|
* power domains using intel_display_set_init_power().
|
|
*/
|
|
void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
struct i915_power_domains *power_domains = &dev_priv->power_domains;
|
|
|
|
power_domains->initializing = true;
|
|
|
|
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
|
|
skl_display_core_init(dev_priv, resume);
|
|
} else if (IS_BROXTON(dev)) {
|
|
bxt_display_core_init(dev_priv, resume);
|
|
} else if (IS_CHERRYVIEW(dev)) {
|
|
mutex_lock(&power_domains->lock);
|
|
chv_phy_control_init(dev_priv);
|
|
mutex_unlock(&power_domains->lock);
|
|
} else if (IS_VALLEYVIEW(dev)) {
|
|
mutex_lock(&power_domains->lock);
|
|
vlv_cmnlane_wa(dev_priv);
|
|
mutex_unlock(&power_domains->lock);
|
|
}
|
|
|
|
/* For now, we need the power well to be always enabled. */
|
|
intel_display_set_init_power(dev_priv, true);
|
|
/* Disable power support if the user asked so. */
|
|
if (!i915.disable_power_well)
|
|
intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
|
|
intel_power_domains_sync_hw(dev_priv);
|
|
power_domains->initializing = false;
|
|
}
|
|
|
|
/**
|
|
* intel_power_domains_suspend - suspend power domain state
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* This function prepares the hardware power domain state before entering
|
|
* system suspend. It must be paired with intel_power_domains_init_hw().
|
|
*/
|
|
void intel_power_domains_suspend(struct drm_i915_private *dev_priv)
|
|
{
|
|
/*
|
|
* Even if power well support was disabled we still want to disable
|
|
* power wells while we are system suspended.
|
|
*/
|
|
if (!i915.disable_power_well)
|
|
intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
|
|
|
|
if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
|
|
skl_display_core_uninit(dev_priv);
|
|
else if (IS_BROXTON(dev_priv))
|
|
bxt_display_core_uninit(dev_priv);
|
|
}
|
|
|
|
/**
|
|
* intel_runtime_pm_get - grab a runtime pm reference
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* This function grabs a device-level runtime pm reference (mostly used for GEM
|
|
* code to ensure the GTT or GT is on) and ensures that it is powered up.
|
|
*
|
|
* Any runtime pm reference obtained by this function must have a symmetric
|
|
* call to intel_runtime_pm_put() to release the reference again.
|
|
*/
|
|
void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
struct device *device = &dev->pdev->dev;
|
|
|
|
pm_runtime_get_sync(device);
|
|
|
|
atomic_inc(&dev_priv->pm.wakeref_count);
|
|
assert_rpm_wakelock_held(dev_priv);
|
|
}
|
|
|
|
/**
|
|
* intel_runtime_pm_get_if_in_use - grab a runtime pm reference if device in use
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* This function grabs a device-level runtime pm reference if the device is
|
|
* already in use and ensures that it is powered up.
|
|
*
|
|
* Any runtime pm reference obtained by this function must have a symmetric
|
|
* call to intel_runtime_pm_put() to release the reference again.
|
|
*/
|
|
bool intel_runtime_pm_get_if_in_use(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
struct device *device = &dev->pdev->dev;
|
|
|
|
if (IS_ENABLED(CONFIG_PM)) {
|
|
int ret = pm_runtime_get_if_in_use(device);
|
|
|
|
/*
|
|
* In cases runtime PM is disabled by the RPM core and we get
|
|
* an -EINVAL return value we are not supposed to call this
|
|
* function, since the power state is undefined. This applies
|
|
* atm to the late/early system suspend/resume handlers.
|
|
*/
|
|
WARN_ON_ONCE(ret < 0);
|
|
if (ret <= 0)
|
|
return false;
|
|
}
|
|
|
|
atomic_inc(&dev_priv->pm.wakeref_count);
|
|
assert_rpm_wakelock_held(dev_priv);
|
|
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* intel_runtime_pm_get_noresume - grab a runtime pm reference
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* This function grabs a device-level runtime pm reference (mostly used for GEM
|
|
* code to ensure the GTT or GT is on).
|
|
*
|
|
* It will _not_ power up the device but instead only check that it's powered
|
|
* on. Therefore it is only valid to call this functions from contexts where
|
|
* the device is known to be powered up and where trying to power it up would
|
|
* result in hilarity and deadlocks. That pretty much means only the system
|
|
* suspend/resume code where this is used to grab runtime pm references for
|
|
* delayed setup down in work items.
|
|
*
|
|
* Any runtime pm reference obtained by this function must have a symmetric
|
|
* call to intel_runtime_pm_put() to release the reference again.
|
|
*/
|
|
void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
struct device *device = &dev->pdev->dev;
|
|
|
|
assert_rpm_wakelock_held(dev_priv);
|
|
pm_runtime_get_noresume(device);
|
|
|
|
atomic_inc(&dev_priv->pm.wakeref_count);
|
|
}
|
|
|
|
/**
|
|
* intel_runtime_pm_put - release a runtime pm reference
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* This function drops the device-level runtime pm reference obtained by
|
|
* intel_runtime_pm_get() and might power down the corresponding
|
|
* hardware block right away if this is the last reference.
|
|
*/
|
|
void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
struct device *device = &dev->pdev->dev;
|
|
|
|
assert_rpm_wakelock_held(dev_priv);
|
|
if (atomic_dec_and_test(&dev_priv->pm.wakeref_count))
|
|
atomic_inc(&dev_priv->pm.atomic_seq);
|
|
|
|
pm_runtime_mark_last_busy(device);
|
|
pm_runtime_put_autosuspend(device);
|
|
}
|
|
|
|
/**
|
|
* intel_runtime_pm_enable - enable runtime pm
|
|
* @dev_priv: i915 device instance
|
|
*
|
|
* This function enables runtime pm at the end of the driver load sequence.
|
|
*
|
|
* Note that this function does currently not enable runtime pm for the
|
|
* subordinate display power domains. That is only done on the first modeset
|
|
* using intel_display_set_init_power().
|
|
*/
|
|
void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
struct device *device = &dev->pdev->dev;
|
|
|
|
pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
|
|
pm_runtime_mark_last_busy(device);
|
|
|
|
/*
|
|
* Take a permanent reference to disable the RPM functionality and drop
|
|
* it only when unloading the driver. Use the low level get/put helpers,
|
|
* so the driver's own RPM reference tracking asserts also work on
|
|
* platforms without RPM support.
|
|
*/
|
|
if (!HAS_RUNTIME_PM(dev)) {
|
|
pm_runtime_dont_use_autosuspend(device);
|
|
pm_runtime_get_sync(device);
|
|
} else {
|
|
pm_runtime_use_autosuspend(device);
|
|
}
|
|
|
|
/*
|
|
* The core calls the driver load handler with an RPM reference held.
|
|
* We drop that here and will reacquire it during unloading in
|
|
* intel_power_domains_fini().
|
|
*/
|
|
pm_runtime_put_autosuspend(device);
|
|
}
|
|
|