forked from Minki/linux
5142cbcea3
Documentation states that SI5351_PLL_RESET_B and SI5351_PLL_RESET_A bits are self clearing bits, so wait until they are cleared before continuing. This fixes a case when the clock doesn't come up properly after a PLL reset. It worked properly when the frequency was below 900MHz, but with 900MHz it only works when we are waiting for the bit to clear. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20201130091033.1687-1-s.hauer@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
1675 lines
42 KiB
C
1675 lines
42 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* clk-si5351.c: Silicon Laboratories Si5351A/B/C I2C Clock Generator
|
|
*
|
|
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
* Rabeeh Khoury <rabeeh@solid-run.com>
|
|
*
|
|
* References:
|
|
* [1] "Si5351A/B/C Data Sheet"
|
|
* https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
|
|
* [2] "Manually Generating an Si5351 Register Map"
|
|
* https://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/rational.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_data/si5351.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <asm/div64.h>
|
|
|
|
#include "clk-si5351.h"
|
|
|
|
struct si5351_driver_data;
|
|
|
|
struct si5351_parameters {
|
|
unsigned long p1;
|
|
unsigned long p2;
|
|
unsigned long p3;
|
|
int valid;
|
|
};
|
|
|
|
struct si5351_hw_data {
|
|
struct clk_hw hw;
|
|
struct si5351_driver_data *drvdata;
|
|
struct si5351_parameters params;
|
|
unsigned char num;
|
|
};
|
|
|
|
struct si5351_driver_data {
|
|
enum si5351_variant variant;
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
|
|
struct clk *pxtal;
|
|
const char *pxtal_name;
|
|
struct clk_hw xtal;
|
|
struct clk *pclkin;
|
|
const char *pclkin_name;
|
|
struct clk_hw clkin;
|
|
|
|
struct si5351_hw_data pll[2];
|
|
struct si5351_hw_data *msynth;
|
|
struct si5351_hw_data *clkout;
|
|
size_t num_clkout;
|
|
};
|
|
|
|
static const char * const si5351_input_names[] = {
|
|
"xtal", "clkin"
|
|
};
|
|
static const char * const si5351_pll_names[] = {
|
|
"si5351_plla", "si5351_pllb", "si5351_vxco"
|
|
};
|
|
static const char * const si5351_msynth_names[] = {
|
|
"ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7"
|
|
};
|
|
static const char * const si5351_clkout_names[] = {
|
|
"clk0", "clk1", "clk2", "clk3", "clk4", "clk5", "clk6", "clk7"
|
|
};
|
|
|
|
/*
|
|
* Si5351 i2c regmap
|
|
*/
|
|
static inline u8 si5351_reg_read(struct si5351_driver_data *drvdata, u8 reg)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = regmap_read(drvdata->regmap, reg, &val);
|
|
if (ret) {
|
|
dev_err(&drvdata->client->dev,
|
|
"unable to read from reg%02x\n", reg);
|
|
return 0;
|
|
}
|
|
|
|
return (u8)val;
|
|
}
|
|
|
|
static inline int si5351_bulk_read(struct si5351_driver_data *drvdata,
|
|
u8 reg, u8 count, u8 *buf)
|
|
{
|
|
return regmap_bulk_read(drvdata->regmap, reg, buf, count);
|
|
}
|
|
|
|
static inline int si5351_reg_write(struct si5351_driver_data *drvdata,
|
|
u8 reg, u8 val)
|
|
{
|
|
return regmap_write(drvdata->regmap, reg, val);
|
|
}
|
|
|
|
static inline int si5351_bulk_write(struct si5351_driver_data *drvdata,
|
|
u8 reg, u8 count, const u8 *buf)
|
|
{
|
|
return regmap_raw_write(drvdata->regmap, reg, buf, count);
|
|
}
|
|
|
|
static inline int si5351_set_bits(struct si5351_driver_data *drvdata,
|
|
u8 reg, u8 mask, u8 val)
|
|
{
|
|
return regmap_update_bits(drvdata->regmap, reg, mask, val);
|
|
}
|
|
|
|
static inline u8 si5351_msynth_params_address(int num)
|
|
{
|
|
if (num > 5)
|
|
return SI5351_CLK6_PARAMETERS + (num - 6);
|
|
return SI5351_CLK0_PARAMETERS + (SI5351_PARAMETERS_LENGTH * num);
|
|
}
|
|
|
|
static void si5351_read_parameters(struct si5351_driver_data *drvdata,
|
|
u8 reg, struct si5351_parameters *params)
|
|
{
|
|
u8 buf[SI5351_PARAMETERS_LENGTH];
|
|
|
|
switch (reg) {
|
|
case SI5351_CLK6_PARAMETERS:
|
|
case SI5351_CLK7_PARAMETERS:
|
|
buf[0] = si5351_reg_read(drvdata, reg);
|
|
params->p1 = buf[0];
|
|
params->p2 = 0;
|
|
params->p3 = 1;
|
|
break;
|
|
default:
|
|
si5351_bulk_read(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf);
|
|
params->p1 = ((buf[2] & 0x03) << 16) | (buf[3] << 8) | buf[4];
|
|
params->p2 = ((buf[5] & 0x0f) << 16) | (buf[6] << 8) | buf[7];
|
|
params->p3 = ((buf[5] & 0xf0) << 12) | (buf[0] << 8) | buf[1];
|
|
}
|
|
params->valid = 1;
|
|
}
|
|
|
|
static void si5351_write_parameters(struct si5351_driver_data *drvdata,
|
|
u8 reg, struct si5351_parameters *params)
|
|
{
|
|
u8 buf[SI5351_PARAMETERS_LENGTH];
|
|
|
|
switch (reg) {
|
|
case SI5351_CLK6_PARAMETERS:
|
|
case SI5351_CLK7_PARAMETERS:
|
|
buf[0] = params->p1 & 0xff;
|
|
si5351_reg_write(drvdata, reg, buf[0]);
|
|
break;
|
|
default:
|
|
buf[0] = ((params->p3 & 0x0ff00) >> 8) & 0xff;
|
|
buf[1] = params->p3 & 0xff;
|
|
/* save rdiv and divby4 */
|
|
buf[2] = si5351_reg_read(drvdata, reg + 2) & ~0x03;
|
|
buf[2] |= ((params->p1 & 0x30000) >> 16) & 0x03;
|
|
buf[3] = ((params->p1 & 0x0ff00) >> 8) & 0xff;
|
|
buf[4] = params->p1 & 0xff;
|
|
buf[5] = ((params->p3 & 0xf0000) >> 12) |
|
|
((params->p2 & 0xf0000) >> 16);
|
|
buf[6] = ((params->p2 & 0x0ff00) >> 8) & 0xff;
|
|
buf[7] = params->p2 & 0xff;
|
|
si5351_bulk_write(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf);
|
|
}
|
|
}
|
|
|
|
static bool si5351_regmap_is_volatile(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case SI5351_DEVICE_STATUS:
|
|
case SI5351_INTERRUPT_STATUS:
|
|
case SI5351_PLL_RESET:
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool si5351_regmap_is_writeable(struct device *dev, unsigned int reg)
|
|
{
|
|
/* reserved registers */
|
|
if (reg >= 4 && reg <= 8)
|
|
return false;
|
|
if (reg >= 10 && reg <= 14)
|
|
return false;
|
|
if (reg >= 173 && reg <= 176)
|
|
return false;
|
|
if (reg >= 178 && reg <= 182)
|
|
return false;
|
|
/* read-only */
|
|
if (reg == SI5351_DEVICE_STATUS)
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
static const struct regmap_config si5351_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.max_register = 187,
|
|
.writeable_reg = si5351_regmap_is_writeable,
|
|
.volatile_reg = si5351_regmap_is_volatile,
|
|
};
|
|
|
|
/*
|
|
* Si5351 xtal clock input
|
|
*/
|
|
static int si5351_xtal_prepare(struct clk_hw *hw)
|
|
{
|
|
struct si5351_driver_data *drvdata =
|
|
container_of(hw, struct si5351_driver_data, xtal);
|
|
si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
|
|
SI5351_XTAL_ENABLE, SI5351_XTAL_ENABLE);
|
|
return 0;
|
|
}
|
|
|
|
static void si5351_xtal_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct si5351_driver_data *drvdata =
|
|
container_of(hw, struct si5351_driver_data, xtal);
|
|
si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
|
|
SI5351_XTAL_ENABLE, 0);
|
|
}
|
|
|
|
static const struct clk_ops si5351_xtal_ops = {
|
|
.prepare = si5351_xtal_prepare,
|
|
.unprepare = si5351_xtal_unprepare,
|
|
};
|
|
|
|
/*
|
|
* Si5351 clkin clock input (Si5351C only)
|
|
*/
|
|
static int si5351_clkin_prepare(struct clk_hw *hw)
|
|
{
|
|
struct si5351_driver_data *drvdata =
|
|
container_of(hw, struct si5351_driver_data, clkin);
|
|
si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
|
|
SI5351_CLKIN_ENABLE, SI5351_CLKIN_ENABLE);
|
|
return 0;
|
|
}
|
|
|
|
static void si5351_clkin_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct si5351_driver_data *drvdata =
|
|
container_of(hw, struct si5351_driver_data, clkin);
|
|
si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
|
|
SI5351_CLKIN_ENABLE, 0);
|
|
}
|
|
|
|
/*
|
|
* CMOS clock source constraints:
|
|
* The input frequency range of the PLL is 10Mhz to 40MHz.
|
|
* If CLKIN is >40MHz, the input divider must be used.
|
|
*/
|
|
static unsigned long si5351_clkin_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct si5351_driver_data *drvdata =
|
|
container_of(hw, struct si5351_driver_data, clkin);
|
|
unsigned long rate;
|
|
unsigned char idiv;
|
|
|
|
rate = parent_rate;
|
|
if (parent_rate > 160000000) {
|
|
idiv = SI5351_CLKIN_DIV_8;
|
|
rate /= 8;
|
|
} else if (parent_rate > 80000000) {
|
|
idiv = SI5351_CLKIN_DIV_4;
|
|
rate /= 4;
|
|
} else if (parent_rate > 40000000) {
|
|
idiv = SI5351_CLKIN_DIV_2;
|
|
rate /= 2;
|
|
} else {
|
|
idiv = SI5351_CLKIN_DIV_1;
|
|
}
|
|
|
|
si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE,
|
|
SI5351_CLKIN_DIV_MASK, idiv);
|
|
|
|
dev_dbg(&drvdata->client->dev, "%s - clkin div = %d, rate = %lu\n",
|
|
__func__, (1 << (idiv >> 6)), rate);
|
|
|
|
return rate;
|
|
}
|
|
|
|
static const struct clk_ops si5351_clkin_ops = {
|
|
.prepare = si5351_clkin_prepare,
|
|
.unprepare = si5351_clkin_unprepare,
|
|
.recalc_rate = si5351_clkin_recalc_rate,
|
|
};
|
|
|
|
/*
|
|
* Si5351 vxco clock input (Si5351B only)
|
|
*/
|
|
|
|
static int si5351_vxco_prepare(struct clk_hw *hw)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
|
|
dev_warn(&hwdata->drvdata->client->dev, "VXCO currently unsupported\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void si5351_vxco_unprepare(struct clk_hw *hw)
|
|
{
|
|
}
|
|
|
|
static unsigned long si5351_vxco_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int si5351_vxco_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops si5351_vxco_ops = {
|
|
.prepare = si5351_vxco_prepare,
|
|
.unprepare = si5351_vxco_unprepare,
|
|
.recalc_rate = si5351_vxco_recalc_rate,
|
|
.set_rate = si5351_vxco_set_rate,
|
|
};
|
|
|
|
/*
|
|
* Si5351 pll a/b
|
|
*
|
|
* Feedback Multisynth Divider Equations [2]
|
|
*
|
|
* fVCO = fIN * (a + b/c)
|
|
*
|
|
* with 15 + 0/1048575 <= (a + b/c) <= 90 + 0/1048575 and
|
|
* fIN = fXTAL or fIN = fCLKIN/CLKIN_DIV
|
|
*
|
|
* Feedback Multisynth Register Equations
|
|
*
|
|
* (1) MSNx_P1[17:0] = 128 * a + floor(128 * b/c) - 512
|
|
* (2) MSNx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c
|
|
* (3) MSNx_P3[19:0] = c
|
|
*
|
|
* Transposing (2) yields: (4) floor(128 * b/c) = (128 * b / MSNx_P2)/c
|
|
*
|
|
* Using (4) on (1) yields:
|
|
* MSNx_P1 = 128 * a + (128 * b/MSNx_P2)/c - 512
|
|
* MSNx_P1 + 512 + MSNx_P2/c = 128 * a + 128 * b/c
|
|
*
|
|
* a + b/c = (MSNx_P1 + MSNx_P2/MSNx_P3 + 512)/128
|
|
* = (MSNx_P1*MSNx_P3 + MSNx_P2 + 512*MSNx_P3)/(128*MSNx_P3)
|
|
*
|
|
*/
|
|
static int _si5351_pll_reparent(struct si5351_driver_data *drvdata,
|
|
int num, enum si5351_pll_src parent)
|
|
{
|
|
u8 mask = (num == 0) ? SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE;
|
|
|
|
if (parent == SI5351_PLL_SRC_DEFAULT)
|
|
return 0;
|
|
|
|
if (num > 2)
|
|
return -EINVAL;
|
|
|
|
if (drvdata->variant != SI5351_VARIANT_C &&
|
|
parent != SI5351_PLL_SRC_XTAL)
|
|
return -EINVAL;
|
|
|
|
si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, mask,
|
|
(parent == SI5351_PLL_SRC_XTAL) ? 0 : mask);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned char si5351_pll_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
u8 mask = (hwdata->num == 0) ? SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE;
|
|
u8 val;
|
|
|
|
val = si5351_reg_read(hwdata->drvdata, SI5351_PLL_INPUT_SOURCE);
|
|
|
|
return (val & mask) ? 1 : 0;
|
|
}
|
|
|
|
static int si5351_pll_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
|
|
if (hwdata->drvdata->variant != SI5351_VARIANT_C &&
|
|
index > 0)
|
|
return -EPERM;
|
|
|
|
if (index > 1)
|
|
return -EINVAL;
|
|
|
|
return _si5351_pll_reparent(hwdata->drvdata, hwdata->num,
|
|
(index == 0) ? SI5351_PLL_SRC_XTAL :
|
|
SI5351_PLL_SRC_CLKIN);
|
|
}
|
|
|
|
static unsigned long si5351_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
u8 reg = (hwdata->num == 0) ? SI5351_PLLA_PARAMETERS :
|
|
SI5351_PLLB_PARAMETERS;
|
|
unsigned long long rate;
|
|
|
|
if (!hwdata->params.valid)
|
|
si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params);
|
|
|
|
if (hwdata->params.p3 == 0)
|
|
return parent_rate;
|
|
|
|
/* fVCO = fIN * (P1*P3 + 512*P3 + P2)/(128*P3) */
|
|
rate = hwdata->params.p1 * hwdata->params.p3;
|
|
rate += 512 * hwdata->params.p3;
|
|
rate += hwdata->params.p2;
|
|
rate *= parent_rate;
|
|
do_div(rate, 128 * hwdata->params.p3);
|
|
|
|
dev_dbg(&hwdata->drvdata->client->dev,
|
|
"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
|
|
__func__, clk_hw_get_name(hw),
|
|
hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
|
|
parent_rate, (unsigned long)rate);
|
|
|
|
return (unsigned long)rate;
|
|
}
|
|
|
|
static long si5351_pll_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
unsigned long rfrac, denom, a, b, c;
|
|
unsigned long long lltmp;
|
|
|
|
if (rate < SI5351_PLL_VCO_MIN)
|
|
rate = SI5351_PLL_VCO_MIN;
|
|
if (rate > SI5351_PLL_VCO_MAX)
|
|
rate = SI5351_PLL_VCO_MAX;
|
|
|
|
/* determine integer part of feedback equation */
|
|
a = rate / *parent_rate;
|
|
|
|
if (a < SI5351_PLL_A_MIN)
|
|
rate = *parent_rate * SI5351_PLL_A_MIN;
|
|
if (a > SI5351_PLL_A_MAX)
|
|
rate = *parent_rate * SI5351_PLL_A_MAX;
|
|
|
|
/* find best approximation for b/c = fVCO mod fIN */
|
|
denom = 1000 * 1000;
|
|
lltmp = rate % (*parent_rate);
|
|
lltmp *= denom;
|
|
do_div(lltmp, *parent_rate);
|
|
rfrac = (unsigned long)lltmp;
|
|
|
|
b = 0;
|
|
c = 1;
|
|
if (rfrac)
|
|
rational_best_approximation(rfrac, denom,
|
|
SI5351_PLL_B_MAX, SI5351_PLL_C_MAX, &b, &c);
|
|
|
|
/* calculate parameters */
|
|
hwdata->params.p3 = c;
|
|
hwdata->params.p2 = (128 * b) % c;
|
|
hwdata->params.p1 = 128 * a;
|
|
hwdata->params.p1 += (128 * b / c);
|
|
hwdata->params.p1 -= 512;
|
|
|
|
/* recalculate rate by fIN * (a + b/c) */
|
|
lltmp = *parent_rate;
|
|
lltmp *= b;
|
|
do_div(lltmp, c);
|
|
|
|
rate = (unsigned long)lltmp;
|
|
rate += *parent_rate * a;
|
|
|
|
dev_dbg(&hwdata->drvdata->client->dev,
|
|
"%s - %s: a = %lu, b = %lu, c = %lu, parent_rate = %lu, rate = %lu\n",
|
|
__func__, clk_hw_get_name(hw), a, b, c,
|
|
*parent_rate, rate);
|
|
|
|
return rate;
|
|
}
|
|
|
|
static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
u8 reg = (hwdata->num == 0) ? SI5351_PLLA_PARAMETERS :
|
|
SI5351_PLLB_PARAMETERS;
|
|
|
|
/* write multisynth parameters */
|
|
si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params);
|
|
|
|
/* plla/pllb ctrl is in clk6/clk7 ctrl registers */
|
|
si5351_set_bits(hwdata->drvdata, SI5351_CLK6_CTRL + hwdata->num,
|
|
SI5351_CLK_INTEGER_MODE,
|
|
(hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0);
|
|
|
|
/* Do a pll soft reset on the affected pll */
|
|
si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET,
|
|
hwdata->num == 0 ? SI5351_PLL_RESET_A :
|
|
SI5351_PLL_RESET_B);
|
|
|
|
dev_dbg(&hwdata->drvdata->client->dev,
|
|
"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
|
|
__func__, clk_hw_get_name(hw),
|
|
hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
|
|
parent_rate, rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops si5351_pll_ops = {
|
|
.set_parent = si5351_pll_set_parent,
|
|
.get_parent = si5351_pll_get_parent,
|
|
.recalc_rate = si5351_pll_recalc_rate,
|
|
.round_rate = si5351_pll_round_rate,
|
|
.set_rate = si5351_pll_set_rate,
|
|
};
|
|
|
|
/*
|
|
* Si5351 multisync divider
|
|
*
|
|
* for fOUT <= 150 MHz:
|
|
*
|
|
* fOUT = (fIN * (a + b/c)) / CLKOUTDIV
|
|
*
|
|
* with 6 + 0/1048575 <= (a + b/c) <= 1800 + 0/1048575 and
|
|
* fIN = fVCO0, fVCO1
|
|
*
|
|
* Output Clock Multisynth Register Equations
|
|
*
|
|
* MSx_P1[17:0] = 128 * a + floor(128 * b/c) - 512
|
|
* MSx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c
|
|
* MSx_P3[19:0] = c
|
|
*
|
|
* MS[6,7] are integer (P1) divide only, P1 = divide value,
|
|
* P2 and P3 are not applicable
|
|
*
|
|
* for 150MHz < fOUT <= 160MHz:
|
|
*
|
|
* MSx_P1 = 0, MSx_P2 = 0, MSx_P3 = 1, MSx_INT = 1, MSx_DIVBY4 = 11b
|
|
*/
|
|
static int _si5351_msynth_reparent(struct si5351_driver_data *drvdata,
|
|
int num, enum si5351_multisynth_src parent)
|
|
{
|
|
if (parent == SI5351_MULTISYNTH_SRC_DEFAULT)
|
|
return 0;
|
|
|
|
if (num > 8)
|
|
return -EINVAL;
|
|
|
|
si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num, SI5351_CLK_PLL_SELECT,
|
|
(parent == SI5351_MULTISYNTH_SRC_VCO0) ? 0 :
|
|
SI5351_CLK_PLL_SELECT);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned char si5351_msynth_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
u8 val;
|
|
|
|
val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num);
|
|
|
|
return (val & SI5351_CLK_PLL_SELECT) ? 1 : 0;
|
|
}
|
|
|
|
static int si5351_msynth_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
|
|
return _si5351_msynth_reparent(hwdata->drvdata, hwdata->num,
|
|
(index == 0) ? SI5351_MULTISYNTH_SRC_VCO0 :
|
|
SI5351_MULTISYNTH_SRC_VCO1);
|
|
}
|
|
|
|
static unsigned long si5351_msynth_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
u8 reg = si5351_msynth_params_address(hwdata->num);
|
|
unsigned long long rate;
|
|
unsigned long m;
|
|
|
|
if (!hwdata->params.valid)
|
|
si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params);
|
|
|
|
/*
|
|
* multisync0-5: fOUT = (128 * P3 * fIN) / (P1*P3 + P2 + 512*P3)
|
|
* multisync6-7: fOUT = fIN / P1
|
|
*/
|
|
rate = parent_rate;
|
|
if (hwdata->num > 5) {
|
|
m = hwdata->params.p1;
|
|
} else if (hwdata->params.p3 == 0) {
|
|
return parent_rate;
|
|
} else if ((si5351_reg_read(hwdata->drvdata, reg + 2) &
|
|
SI5351_OUTPUT_CLK_DIVBY4) == SI5351_OUTPUT_CLK_DIVBY4) {
|
|
m = 4;
|
|
} else {
|
|
rate *= 128 * hwdata->params.p3;
|
|
m = hwdata->params.p1 * hwdata->params.p3;
|
|
m += hwdata->params.p2;
|
|
m += 512 * hwdata->params.p3;
|
|
}
|
|
|
|
if (m == 0)
|
|
return 0;
|
|
do_div(rate, m);
|
|
|
|
dev_dbg(&hwdata->drvdata->client->dev,
|
|
"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, m = %lu, parent_rate = %lu, rate = %lu\n",
|
|
__func__, clk_hw_get_name(hw),
|
|
hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
|
|
m, parent_rate, (unsigned long)rate);
|
|
|
|
return (unsigned long)rate;
|
|
}
|
|
|
|
static long si5351_msynth_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
unsigned long long lltmp;
|
|
unsigned long a, b, c;
|
|
int divby4;
|
|
|
|
/* multisync6-7 can only handle freqencies < 150MHz */
|
|
if (hwdata->num >= 6 && rate > SI5351_MULTISYNTH67_MAX_FREQ)
|
|
rate = SI5351_MULTISYNTH67_MAX_FREQ;
|
|
|
|
/* multisync frequency is 1MHz .. 160MHz */
|
|
if (rate > SI5351_MULTISYNTH_MAX_FREQ)
|
|
rate = SI5351_MULTISYNTH_MAX_FREQ;
|
|
if (rate < SI5351_MULTISYNTH_MIN_FREQ)
|
|
rate = SI5351_MULTISYNTH_MIN_FREQ;
|
|
|
|
divby4 = 0;
|
|
if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ)
|
|
divby4 = 1;
|
|
|
|
/* multisync can set pll */
|
|
if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
|
|
/*
|
|
* find largest integer divider for max
|
|
* vco frequency and given target rate
|
|
*/
|
|
if (divby4 == 0) {
|
|
lltmp = SI5351_PLL_VCO_MAX;
|
|
do_div(lltmp, rate);
|
|
a = (unsigned long)lltmp;
|
|
} else
|
|
a = 4;
|
|
|
|
b = 0;
|
|
c = 1;
|
|
|
|
*parent_rate = a * rate;
|
|
} else if (hwdata->num >= 6) {
|
|
/* determine the closest integer divider */
|
|
a = DIV_ROUND_CLOSEST(*parent_rate, rate);
|
|
if (a < SI5351_MULTISYNTH_A_MIN)
|
|
a = SI5351_MULTISYNTH_A_MIN;
|
|
if (a > SI5351_MULTISYNTH67_A_MAX)
|
|
a = SI5351_MULTISYNTH67_A_MAX;
|
|
|
|
b = 0;
|
|
c = 1;
|
|
} else {
|
|
unsigned long rfrac, denom;
|
|
|
|
/* disable divby4 */
|
|
if (divby4) {
|
|
rate = SI5351_MULTISYNTH_DIVBY4_FREQ;
|
|
divby4 = 0;
|
|
}
|
|
|
|
/* determine integer part of divider equation */
|
|
a = *parent_rate / rate;
|
|
if (a < SI5351_MULTISYNTH_A_MIN)
|
|
a = SI5351_MULTISYNTH_A_MIN;
|
|
if (a > SI5351_MULTISYNTH_A_MAX)
|
|
a = SI5351_MULTISYNTH_A_MAX;
|
|
|
|
/* find best approximation for b/c = fVCO mod fOUT */
|
|
denom = 1000 * 1000;
|
|
lltmp = (*parent_rate) % rate;
|
|
lltmp *= denom;
|
|
do_div(lltmp, rate);
|
|
rfrac = (unsigned long)lltmp;
|
|
|
|
b = 0;
|
|
c = 1;
|
|
if (rfrac)
|
|
rational_best_approximation(rfrac, denom,
|
|
SI5351_MULTISYNTH_B_MAX, SI5351_MULTISYNTH_C_MAX,
|
|
&b, &c);
|
|
}
|
|
|
|
/* recalculate rate by fOUT = fIN / (a + b/c) */
|
|
lltmp = *parent_rate;
|
|
lltmp *= c;
|
|
do_div(lltmp, a * c + b);
|
|
rate = (unsigned long)lltmp;
|
|
|
|
/* calculate parameters */
|
|
if (divby4) {
|
|
hwdata->params.p3 = 1;
|
|
hwdata->params.p2 = 0;
|
|
hwdata->params.p1 = 0;
|
|
} else if (hwdata->num >= 6) {
|
|
hwdata->params.p3 = 0;
|
|
hwdata->params.p2 = 0;
|
|
hwdata->params.p1 = a;
|
|
} else {
|
|
hwdata->params.p3 = c;
|
|
hwdata->params.p2 = (128 * b) % c;
|
|
hwdata->params.p1 = 128 * a;
|
|
hwdata->params.p1 += (128 * b / c);
|
|
hwdata->params.p1 -= 512;
|
|
}
|
|
|
|
dev_dbg(&hwdata->drvdata->client->dev,
|
|
"%s - %s: a = %lu, b = %lu, c = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n",
|
|
__func__, clk_hw_get_name(hw), a, b, c, divby4,
|
|
*parent_rate, rate);
|
|
|
|
return rate;
|
|
}
|
|
|
|
static int si5351_msynth_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
u8 reg = si5351_msynth_params_address(hwdata->num);
|
|
int divby4 = 0;
|
|
|
|
/* write multisynth parameters */
|
|
si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params);
|
|
|
|
if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ)
|
|
divby4 = 1;
|
|
|
|
/* enable/disable integer mode and divby4 on multisynth0-5 */
|
|
if (hwdata->num < 6) {
|
|
si5351_set_bits(hwdata->drvdata, reg + 2,
|
|
SI5351_OUTPUT_CLK_DIVBY4,
|
|
(divby4) ? SI5351_OUTPUT_CLK_DIVBY4 : 0);
|
|
si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
|
|
SI5351_CLK_INTEGER_MODE,
|
|
(hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0);
|
|
}
|
|
|
|
dev_dbg(&hwdata->drvdata->client->dev,
|
|
"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n",
|
|
__func__, clk_hw_get_name(hw),
|
|
hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
|
|
divby4, parent_rate, rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops si5351_msynth_ops = {
|
|
.set_parent = si5351_msynth_set_parent,
|
|
.get_parent = si5351_msynth_get_parent,
|
|
.recalc_rate = si5351_msynth_recalc_rate,
|
|
.round_rate = si5351_msynth_round_rate,
|
|
.set_rate = si5351_msynth_set_rate,
|
|
};
|
|
|
|
/*
|
|
* Si5351 clkout divider
|
|
*/
|
|
static int _si5351_clkout_reparent(struct si5351_driver_data *drvdata,
|
|
int num, enum si5351_clkout_src parent)
|
|
{
|
|
u8 val;
|
|
|
|
if (num > 8)
|
|
return -EINVAL;
|
|
|
|
switch (parent) {
|
|
case SI5351_CLKOUT_SRC_MSYNTH_N:
|
|
val = SI5351_CLK_INPUT_MULTISYNTH_N;
|
|
break;
|
|
case SI5351_CLKOUT_SRC_MSYNTH_0_4:
|
|
/* clk0/clk4 can only connect to its own multisync */
|
|
if (num == 0 || num == 4)
|
|
val = SI5351_CLK_INPUT_MULTISYNTH_N;
|
|
else
|
|
val = SI5351_CLK_INPUT_MULTISYNTH_0_4;
|
|
break;
|
|
case SI5351_CLKOUT_SRC_XTAL:
|
|
val = SI5351_CLK_INPUT_XTAL;
|
|
break;
|
|
case SI5351_CLKOUT_SRC_CLKIN:
|
|
if (drvdata->variant != SI5351_VARIANT_C)
|
|
return -EINVAL;
|
|
|
|
val = SI5351_CLK_INPUT_CLKIN;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num,
|
|
SI5351_CLK_INPUT_MASK, val);
|
|
return 0;
|
|
}
|
|
|
|
static int _si5351_clkout_set_drive_strength(
|
|
struct si5351_driver_data *drvdata, int num,
|
|
enum si5351_drive_strength drive)
|
|
{
|
|
u8 mask;
|
|
|
|
if (num > 8)
|
|
return -EINVAL;
|
|
|
|
switch (drive) {
|
|
case SI5351_DRIVE_2MA:
|
|
mask = SI5351_CLK_DRIVE_STRENGTH_2MA;
|
|
break;
|
|
case SI5351_DRIVE_4MA:
|
|
mask = SI5351_CLK_DRIVE_STRENGTH_4MA;
|
|
break;
|
|
case SI5351_DRIVE_6MA:
|
|
mask = SI5351_CLK_DRIVE_STRENGTH_6MA;
|
|
break;
|
|
case SI5351_DRIVE_8MA:
|
|
mask = SI5351_CLK_DRIVE_STRENGTH_8MA;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num,
|
|
SI5351_CLK_DRIVE_STRENGTH_MASK, mask);
|
|
return 0;
|
|
}
|
|
|
|
static int _si5351_clkout_set_disable_state(
|
|
struct si5351_driver_data *drvdata, int num,
|
|
enum si5351_disable_state state)
|
|
{
|
|
u8 reg = (num < 4) ? SI5351_CLK3_0_DISABLE_STATE :
|
|
SI5351_CLK7_4_DISABLE_STATE;
|
|
u8 shift = (num < 4) ? (2 * num) : (2 * (num-4));
|
|
u8 mask = SI5351_CLK_DISABLE_STATE_MASK << shift;
|
|
u8 val;
|
|
|
|
if (num > 8)
|
|
return -EINVAL;
|
|
|
|
switch (state) {
|
|
case SI5351_DISABLE_LOW:
|
|
val = SI5351_CLK_DISABLE_STATE_LOW;
|
|
break;
|
|
case SI5351_DISABLE_HIGH:
|
|
val = SI5351_CLK_DISABLE_STATE_HIGH;
|
|
break;
|
|
case SI5351_DISABLE_FLOATING:
|
|
val = SI5351_CLK_DISABLE_STATE_FLOAT;
|
|
break;
|
|
case SI5351_DISABLE_NEVER:
|
|
val = SI5351_CLK_DISABLE_STATE_NEVER;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
si5351_set_bits(drvdata, reg, mask, val << shift);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void _si5351_clkout_reset_pll(struct si5351_driver_data *drvdata, int num)
|
|
{
|
|
u8 val = si5351_reg_read(drvdata, SI5351_CLK0_CTRL + num);
|
|
u8 mask = val & SI5351_CLK_PLL_SELECT ? SI5351_PLL_RESET_B :
|
|
SI5351_PLL_RESET_A;
|
|
unsigned int v;
|
|
int err;
|
|
|
|
switch (val & SI5351_CLK_INPUT_MASK) {
|
|
case SI5351_CLK_INPUT_XTAL:
|
|
case SI5351_CLK_INPUT_CLKIN:
|
|
return; /* pll not used, no need to reset */
|
|
}
|
|
|
|
si5351_reg_write(drvdata, SI5351_PLL_RESET, mask);
|
|
|
|
err = regmap_read_poll_timeout(drvdata->regmap, SI5351_PLL_RESET, v,
|
|
!(v & mask), 0, 20000);
|
|
if (err < 0)
|
|
dev_err(&drvdata->client->dev, "Reset bit didn't clear\n");
|
|
|
|
dev_dbg(&drvdata->client->dev, "%s - %s: pll = %d\n",
|
|
__func__, clk_hw_get_name(&drvdata->clkout[num].hw),
|
|
(val & SI5351_CLK_PLL_SELECT) ? 1 : 0);
|
|
}
|
|
|
|
static int si5351_clkout_prepare(struct clk_hw *hw)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
struct si5351_platform_data *pdata =
|
|
hwdata->drvdata->client->dev.platform_data;
|
|
|
|
si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
|
|
SI5351_CLK_POWERDOWN, 0);
|
|
|
|
/*
|
|
* Do a pll soft reset on the parent pll -- needed to get a
|
|
* deterministic phase relationship between the output clocks.
|
|
*/
|
|
if (pdata->clkout[hwdata->num].pll_reset)
|
|
_si5351_clkout_reset_pll(hwdata->drvdata, hwdata->num);
|
|
|
|
si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL,
|
|
(1 << hwdata->num), 0);
|
|
return 0;
|
|
}
|
|
|
|
static void si5351_clkout_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
|
|
si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
|
|
SI5351_CLK_POWERDOWN, SI5351_CLK_POWERDOWN);
|
|
si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL,
|
|
(1 << hwdata->num), (1 << hwdata->num));
|
|
}
|
|
|
|
static u8 si5351_clkout_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
int index = 0;
|
|
unsigned char val;
|
|
|
|
val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num);
|
|
switch (val & SI5351_CLK_INPUT_MASK) {
|
|
case SI5351_CLK_INPUT_MULTISYNTH_N:
|
|
index = 0;
|
|
break;
|
|
case SI5351_CLK_INPUT_MULTISYNTH_0_4:
|
|
index = 1;
|
|
break;
|
|
case SI5351_CLK_INPUT_XTAL:
|
|
index = 2;
|
|
break;
|
|
case SI5351_CLK_INPUT_CLKIN:
|
|
index = 3;
|
|
break;
|
|
}
|
|
|
|
return index;
|
|
}
|
|
|
|
static int si5351_clkout_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
enum si5351_clkout_src parent = SI5351_CLKOUT_SRC_DEFAULT;
|
|
|
|
switch (index) {
|
|
case 0:
|
|
parent = SI5351_CLKOUT_SRC_MSYNTH_N;
|
|
break;
|
|
case 1:
|
|
parent = SI5351_CLKOUT_SRC_MSYNTH_0_4;
|
|
break;
|
|
case 2:
|
|
parent = SI5351_CLKOUT_SRC_XTAL;
|
|
break;
|
|
case 3:
|
|
parent = SI5351_CLKOUT_SRC_CLKIN;
|
|
break;
|
|
}
|
|
|
|
return _si5351_clkout_reparent(hwdata->drvdata, hwdata->num, parent);
|
|
}
|
|
|
|
static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
unsigned char reg;
|
|
unsigned char rdiv;
|
|
|
|
if (hwdata->num <= 5)
|
|
reg = si5351_msynth_params_address(hwdata->num) + 2;
|
|
else
|
|
reg = SI5351_CLK6_7_OUTPUT_DIVIDER;
|
|
|
|
rdiv = si5351_reg_read(hwdata->drvdata, reg);
|
|
if (hwdata->num == 6) {
|
|
rdiv &= SI5351_OUTPUT_CLK6_DIV_MASK;
|
|
} else {
|
|
rdiv &= SI5351_OUTPUT_CLK_DIV_MASK;
|
|
rdiv >>= SI5351_OUTPUT_CLK_DIV_SHIFT;
|
|
}
|
|
|
|
return parent_rate >> rdiv;
|
|
}
|
|
|
|
static long si5351_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
unsigned char rdiv;
|
|
|
|
/* clkout6/7 can only handle output freqencies < 150MHz */
|
|
if (hwdata->num >= 6 && rate > SI5351_CLKOUT67_MAX_FREQ)
|
|
rate = SI5351_CLKOUT67_MAX_FREQ;
|
|
|
|
/* clkout freqency is 8kHz - 160MHz */
|
|
if (rate > SI5351_CLKOUT_MAX_FREQ)
|
|
rate = SI5351_CLKOUT_MAX_FREQ;
|
|
if (rate < SI5351_CLKOUT_MIN_FREQ)
|
|
rate = SI5351_CLKOUT_MIN_FREQ;
|
|
|
|
/* request frequency if multisync master */
|
|
if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
|
|
/* use r divider for frequencies below 1MHz */
|
|
rdiv = SI5351_OUTPUT_CLK_DIV_1;
|
|
while (rate < SI5351_MULTISYNTH_MIN_FREQ &&
|
|
rdiv < SI5351_OUTPUT_CLK_DIV_128) {
|
|
rdiv += 1;
|
|
rate *= 2;
|
|
}
|
|
*parent_rate = rate;
|
|
} else {
|
|
unsigned long new_rate, new_err, err;
|
|
|
|
/* round to closed rdiv */
|
|
rdiv = SI5351_OUTPUT_CLK_DIV_1;
|
|
new_rate = *parent_rate;
|
|
err = abs(new_rate - rate);
|
|
do {
|
|
new_rate >>= 1;
|
|
new_err = abs(new_rate - rate);
|
|
if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128)
|
|
break;
|
|
rdiv++;
|
|
err = new_err;
|
|
} while (1);
|
|
}
|
|
rate = *parent_rate >> rdiv;
|
|
|
|
dev_dbg(&hwdata->drvdata->client->dev,
|
|
"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
|
|
__func__, clk_hw_get_name(hw), (1 << rdiv),
|
|
*parent_rate, rate);
|
|
|
|
return rate;
|
|
}
|
|
|
|
static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct si5351_hw_data *hwdata =
|
|
container_of(hw, struct si5351_hw_data, hw);
|
|
unsigned long new_rate, new_err, err;
|
|
unsigned char rdiv;
|
|
|
|
/* round to closed rdiv */
|
|
rdiv = SI5351_OUTPUT_CLK_DIV_1;
|
|
new_rate = parent_rate;
|
|
err = abs(new_rate - rate);
|
|
do {
|
|
new_rate >>= 1;
|
|
new_err = abs(new_rate - rate);
|
|
if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128)
|
|
break;
|
|
rdiv++;
|
|
err = new_err;
|
|
} while (1);
|
|
|
|
/* write output divider */
|
|
switch (hwdata->num) {
|
|
case 6:
|
|
si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER,
|
|
SI5351_OUTPUT_CLK6_DIV_MASK, rdiv);
|
|
break;
|
|
case 7:
|
|
si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER,
|
|
SI5351_OUTPUT_CLK_DIV_MASK,
|
|
rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT);
|
|
break;
|
|
default:
|
|
si5351_set_bits(hwdata->drvdata,
|
|
si5351_msynth_params_address(hwdata->num) + 2,
|
|
SI5351_OUTPUT_CLK_DIV_MASK,
|
|
rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT);
|
|
}
|
|
|
|
/* powerup clkout */
|
|
si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
|
|
SI5351_CLK_POWERDOWN, 0);
|
|
|
|
dev_dbg(&hwdata->drvdata->client->dev,
|
|
"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
|
|
__func__, clk_hw_get_name(hw), (1 << rdiv),
|
|
parent_rate, rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops si5351_clkout_ops = {
|
|
.prepare = si5351_clkout_prepare,
|
|
.unprepare = si5351_clkout_unprepare,
|
|
.set_parent = si5351_clkout_set_parent,
|
|
.get_parent = si5351_clkout_get_parent,
|
|
.recalc_rate = si5351_clkout_recalc_rate,
|
|
.round_rate = si5351_clkout_round_rate,
|
|
.set_rate = si5351_clkout_set_rate,
|
|
};
|
|
|
|
/*
|
|
* Si5351 i2c probe and DT
|
|
*/
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id si5351_dt_ids[] = {
|
|
{ .compatible = "silabs,si5351a", .data = (void *)SI5351_VARIANT_A, },
|
|
{ .compatible = "silabs,si5351a-msop",
|
|
.data = (void *)SI5351_VARIANT_A3, },
|
|
{ .compatible = "silabs,si5351b", .data = (void *)SI5351_VARIANT_B, },
|
|
{ .compatible = "silabs,si5351c", .data = (void *)SI5351_VARIANT_C, },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, si5351_dt_ids);
|
|
|
|
static int si5351_dt_parse(struct i2c_client *client,
|
|
enum si5351_variant variant)
|
|
{
|
|
struct device_node *child, *np = client->dev.of_node;
|
|
struct si5351_platform_data *pdata;
|
|
struct property *prop;
|
|
const __be32 *p;
|
|
int num = 0;
|
|
u32 val;
|
|
|
|
if (np == NULL)
|
|
return 0;
|
|
|
|
pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* property silabs,pll-source : <num src>, [<..>]
|
|
* allow to selectively set pll source
|
|
*/
|
|
of_property_for_each_u32(np, "silabs,pll-source", prop, p, num) {
|
|
if (num >= 2) {
|
|
dev_err(&client->dev,
|
|
"invalid pll %d on pll-source prop\n", num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
p = of_prop_next_u32(prop, p, &val);
|
|
if (!p) {
|
|
dev_err(&client->dev,
|
|
"missing pll-source for pll %d\n", num);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (val) {
|
|
case 0:
|
|
pdata->pll_src[num] = SI5351_PLL_SRC_XTAL;
|
|
break;
|
|
case 1:
|
|
if (variant != SI5351_VARIANT_C) {
|
|
dev_err(&client->dev,
|
|
"invalid parent %d for pll %d\n",
|
|
val, num);
|
|
return -EINVAL;
|
|
}
|
|
pdata->pll_src[num] = SI5351_PLL_SRC_CLKIN;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev,
|
|
"invalid parent %d for pll %d\n", val, num);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* per clkout properties */
|
|
for_each_child_of_node(np, child) {
|
|
if (of_property_read_u32(child, "reg", &num)) {
|
|
dev_err(&client->dev, "missing reg property of %pOFn\n",
|
|
child);
|
|
goto put_child;
|
|
}
|
|
|
|
if (num >= 8 ||
|
|
(variant == SI5351_VARIANT_A3 && num >= 3)) {
|
|
dev_err(&client->dev, "invalid clkout %d\n", num);
|
|
goto put_child;
|
|
}
|
|
|
|
if (!of_property_read_u32(child, "silabs,multisynth-source",
|
|
&val)) {
|
|
switch (val) {
|
|
case 0:
|
|
pdata->clkout[num].multisynth_src =
|
|
SI5351_MULTISYNTH_SRC_VCO0;
|
|
break;
|
|
case 1:
|
|
pdata->clkout[num].multisynth_src =
|
|
SI5351_MULTISYNTH_SRC_VCO1;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev,
|
|
"invalid parent %d for multisynth %d\n",
|
|
val, num);
|
|
goto put_child;
|
|
}
|
|
}
|
|
|
|
if (!of_property_read_u32(child, "silabs,clock-source", &val)) {
|
|
switch (val) {
|
|
case 0:
|
|
pdata->clkout[num].clkout_src =
|
|
SI5351_CLKOUT_SRC_MSYNTH_N;
|
|
break;
|
|
case 1:
|
|
pdata->clkout[num].clkout_src =
|
|
SI5351_CLKOUT_SRC_MSYNTH_0_4;
|
|
break;
|
|
case 2:
|
|
pdata->clkout[num].clkout_src =
|
|
SI5351_CLKOUT_SRC_XTAL;
|
|
break;
|
|
case 3:
|
|
if (variant != SI5351_VARIANT_C) {
|
|
dev_err(&client->dev,
|
|
"invalid parent %d for clkout %d\n",
|
|
val, num);
|
|
goto put_child;
|
|
}
|
|
pdata->clkout[num].clkout_src =
|
|
SI5351_CLKOUT_SRC_CLKIN;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev,
|
|
"invalid parent %d for clkout %d\n",
|
|
val, num);
|
|
goto put_child;
|
|
}
|
|
}
|
|
|
|
if (!of_property_read_u32(child, "silabs,drive-strength",
|
|
&val)) {
|
|
switch (val) {
|
|
case SI5351_DRIVE_2MA:
|
|
case SI5351_DRIVE_4MA:
|
|
case SI5351_DRIVE_6MA:
|
|
case SI5351_DRIVE_8MA:
|
|
pdata->clkout[num].drive = val;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev,
|
|
"invalid drive strength %d for clkout %d\n",
|
|
val, num);
|
|
goto put_child;
|
|
}
|
|
}
|
|
|
|
if (!of_property_read_u32(child, "silabs,disable-state",
|
|
&val)) {
|
|
switch (val) {
|
|
case 0:
|
|
pdata->clkout[num].disable_state =
|
|
SI5351_DISABLE_LOW;
|
|
break;
|
|
case 1:
|
|
pdata->clkout[num].disable_state =
|
|
SI5351_DISABLE_HIGH;
|
|
break;
|
|
case 2:
|
|
pdata->clkout[num].disable_state =
|
|
SI5351_DISABLE_FLOATING;
|
|
break;
|
|
case 3:
|
|
pdata->clkout[num].disable_state =
|
|
SI5351_DISABLE_NEVER;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev,
|
|
"invalid disable state %d for clkout %d\n",
|
|
val, num);
|
|
goto put_child;
|
|
}
|
|
}
|
|
|
|
if (!of_property_read_u32(child, "clock-frequency", &val))
|
|
pdata->clkout[num].rate = val;
|
|
|
|
pdata->clkout[num].pll_master =
|
|
of_property_read_bool(child, "silabs,pll-master");
|
|
|
|
pdata->clkout[num].pll_reset =
|
|
of_property_read_bool(child, "silabs,pll-reset");
|
|
}
|
|
client->dev.platform_data = pdata;
|
|
|
|
return 0;
|
|
put_child:
|
|
of_node_put(child);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct clk_hw *
|
|
si53351_of_clk_get(struct of_phandle_args *clkspec, void *data)
|
|
{
|
|
struct si5351_driver_data *drvdata = data;
|
|
unsigned int idx = clkspec->args[0];
|
|
|
|
if (idx >= drvdata->num_clkout) {
|
|
pr_err("%s: invalid index %u\n", __func__, idx);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
return &drvdata->clkout[idx].hw;
|
|
}
|
|
#else
|
|
static int si5351_dt_parse(struct i2c_client *client, enum si5351_variant variant)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct clk_hw *
|
|
si53351_of_clk_get(struct of_phandle_args *clkspec, void *data)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int si5351_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
enum si5351_variant variant = (enum si5351_variant)id->driver_data;
|
|
struct si5351_platform_data *pdata;
|
|
struct si5351_driver_data *drvdata;
|
|
struct clk_init_data init;
|
|
const char *parent_names[4];
|
|
u8 num_parents, num_clocks;
|
|
int ret, n;
|
|
|
|
ret = si5351_dt_parse(client, variant);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pdata = client->dev.platform_data;
|
|
if (!pdata)
|
|
return -EINVAL;
|
|
|
|
drvdata = devm_kzalloc(&client->dev, sizeof(*drvdata), GFP_KERNEL);
|
|
if (!drvdata)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, drvdata);
|
|
drvdata->client = client;
|
|
drvdata->variant = variant;
|
|
drvdata->pxtal = devm_clk_get(&client->dev, "xtal");
|
|
drvdata->pclkin = devm_clk_get(&client->dev, "clkin");
|
|
|
|
if (PTR_ERR(drvdata->pxtal) == -EPROBE_DEFER ||
|
|
PTR_ERR(drvdata->pclkin) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
/*
|
|
* Check for valid parent clock: VARIANT_A and VARIANT_B need XTAL,
|
|
* VARIANT_C can have CLKIN instead.
|
|
*/
|
|
if (IS_ERR(drvdata->pxtal) &&
|
|
(drvdata->variant != SI5351_VARIANT_C || IS_ERR(drvdata->pclkin))) {
|
|
dev_err(&client->dev, "missing parent clock\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
drvdata->regmap = devm_regmap_init_i2c(client, &si5351_regmap_config);
|
|
if (IS_ERR(drvdata->regmap)) {
|
|
dev_err(&client->dev, "failed to allocate register map\n");
|
|
return PTR_ERR(drvdata->regmap);
|
|
}
|
|
|
|
/* Disable interrupts */
|
|
si5351_reg_write(drvdata, SI5351_INTERRUPT_MASK, 0xf0);
|
|
/* Ensure pll select is on XTAL for Si5351A/B */
|
|
if (drvdata->variant != SI5351_VARIANT_C)
|
|
si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE,
|
|
SI5351_PLLA_SOURCE | SI5351_PLLB_SOURCE, 0);
|
|
|
|
/* setup clock configuration */
|
|
for (n = 0; n < 2; n++) {
|
|
ret = _si5351_pll_reparent(drvdata, n, pdata->pll_src[n]);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"failed to reparent pll %d to %d\n",
|
|
n, pdata->pll_src[n]);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
for (n = 0; n < 8; n++) {
|
|
ret = _si5351_msynth_reparent(drvdata, n,
|
|
pdata->clkout[n].multisynth_src);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"failed to reparent multisynth %d to %d\n",
|
|
n, pdata->clkout[n].multisynth_src);
|
|
return ret;
|
|
}
|
|
|
|
ret = _si5351_clkout_reparent(drvdata, n,
|
|
pdata->clkout[n].clkout_src);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"failed to reparent clkout %d to %d\n",
|
|
n, pdata->clkout[n].clkout_src);
|
|
return ret;
|
|
}
|
|
|
|
ret = _si5351_clkout_set_drive_strength(drvdata, n,
|
|
pdata->clkout[n].drive);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"failed set drive strength of clkout%d to %d\n",
|
|
n, pdata->clkout[n].drive);
|
|
return ret;
|
|
}
|
|
|
|
ret = _si5351_clkout_set_disable_state(drvdata, n,
|
|
pdata->clkout[n].disable_state);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"failed set disable state of clkout%d to %d\n",
|
|
n, pdata->clkout[n].disable_state);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* register xtal input clock gate */
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = si5351_input_names[0];
|
|
init.ops = &si5351_xtal_ops;
|
|
init.flags = 0;
|
|
if (!IS_ERR(drvdata->pxtal)) {
|
|
drvdata->pxtal_name = __clk_get_name(drvdata->pxtal);
|
|
init.parent_names = &drvdata->pxtal_name;
|
|
init.num_parents = 1;
|
|
}
|
|
drvdata->xtal.init = &init;
|
|
ret = devm_clk_hw_register(&client->dev, &drvdata->xtal);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to register %s\n", init.name);
|
|
return ret;
|
|
}
|
|
|
|
/* register clkin input clock gate */
|
|
if (drvdata->variant == SI5351_VARIANT_C) {
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = si5351_input_names[1];
|
|
init.ops = &si5351_clkin_ops;
|
|
if (!IS_ERR(drvdata->pclkin)) {
|
|
drvdata->pclkin_name = __clk_get_name(drvdata->pclkin);
|
|
init.parent_names = &drvdata->pclkin_name;
|
|
init.num_parents = 1;
|
|
}
|
|
drvdata->clkin.init = &init;
|
|
ret = devm_clk_hw_register(&client->dev, &drvdata->clkin);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to register %s\n",
|
|
init.name);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Si5351C allows to mux either xtal or clkin to PLL input */
|
|
num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 2 : 1;
|
|
parent_names[0] = si5351_input_names[0];
|
|
parent_names[1] = si5351_input_names[1];
|
|
|
|
/* register PLLA */
|
|
drvdata->pll[0].num = 0;
|
|
drvdata->pll[0].drvdata = drvdata;
|
|
drvdata->pll[0].hw.init = &init;
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = si5351_pll_names[0];
|
|
init.ops = &si5351_pll_ops;
|
|
init.flags = 0;
|
|
init.parent_names = parent_names;
|
|
init.num_parents = num_parents;
|
|
ret = devm_clk_hw_register(&client->dev, &drvdata->pll[0].hw);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to register %s\n", init.name);
|
|
return ret;
|
|
}
|
|
|
|
/* register PLLB or VXCO (Si5351B) */
|
|
drvdata->pll[1].num = 1;
|
|
drvdata->pll[1].drvdata = drvdata;
|
|
drvdata->pll[1].hw.init = &init;
|
|
memset(&init, 0, sizeof(init));
|
|
if (drvdata->variant == SI5351_VARIANT_B) {
|
|
init.name = si5351_pll_names[2];
|
|
init.ops = &si5351_vxco_ops;
|
|
init.flags = 0;
|
|
init.parent_names = NULL;
|
|
init.num_parents = 0;
|
|
} else {
|
|
init.name = si5351_pll_names[1];
|
|
init.ops = &si5351_pll_ops;
|
|
init.flags = 0;
|
|
init.parent_names = parent_names;
|
|
init.num_parents = num_parents;
|
|
}
|
|
ret = devm_clk_hw_register(&client->dev, &drvdata->pll[1].hw);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to register %s\n", init.name);
|
|
return ret;
|
|
}
|
|
|
|
/* register clk multisync and clk out divider */
|
|
num_clocks = (drvdata->variant == SI5351_VARIANT_A3) ? 3 : 8;
|
|
parent_names[0] = si5351_pll_names[0];
|
|
if (drvdata->variant == SI5351_VARIANT_B)
|
|
parent_names[1] = si5351_pll_names[2];
|
|
else
|
|
parent_names[1] = si5351_pll_names[1];
|
|
|
|
drvdata->msynth = devm_kcalloc(&client->dev, num_clocks,
|
|
sizeof(*drvdata->msynth), GFP_KERNEL);
|
|
drvdata->clkout = devm_kcalloc(&client->dev, num_clocks,
|
|
sizeof(*drvdata->clkout), GFP_KERNEL);
|
|
drvdata->num_clkout = num_clocks;
|
|
|
|
if (WARN_ON(!drvdata->msynth || !drvdata->clkout)) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
for (n = 0; n < num_clocks; n++) {
|
|
drvdata->msynth[n].num = n;
|
|
drvdata->msynth[n].drvdata = drvdata;
|
|
drvdata->msynth[n].hw.init = &init;
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = si5351_msynth_names[n];
|
|
init.ops = &si5351_msynth_ops;
|
|
init.flags = 0;
|
|
if (pdata->clkout[n].pll_master)
|
|
init.flags |= CLK_SET_RATE_PARENT;
|
|
init.parent_names = parent_names;
|
|
init.num_parents = 2;
|
|
ret = devm_clk_hw_register(&client->dev,
|
|
&drvdata->msynth[n].hw);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to register %s\n",
|
|
init.name);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 4 : 3;
|
|
parent_names[2] = si5351_input_names[0];
|
|
parent_names[3] = si5351_input_names[1];
|
|
for (n = 0; n < num_clocks; n++) {
|
|
parent_names[0] = si5351_msynth_names[n];
|
|
parent_names[1] = (n < 4) ? si5351_msynth_names[0] :
|
|
si5351_msynth_names[4];
|
|
|
|
drvdata->clkout[n].num = n;
|
|
drvdata->clkout[n].drvdata = drvdata;
|
|
drvdata->clkout[n].hw.init = &init;
|
|
memset(&init, 0, sizeof(init));
|
|
init.name = si5351_clkout_names[n];
|
|
init.ops = &si5351_clkout_ops;
|
|
init.flags = 0;
|
|
if (pdata->clkout[n].clkout_src == SI5351_CLKOUT_SRC_MSYNTH_N)
|
|
init.flags |= CLK_SET_RATE_PARENT;
|
|
init.parent_names = parent_names;
|
|
init.num_parents = num_parents;
|
|
ret = devm_clk_hw_register(&client->dev,
|
|
&drvdata->clkout[n].hw);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to register %s\n",
|
|
init.name);
|
|
return ret;
|
|
}
|
|
|
|
/* set initial clkout rate */
|
|
if (pdata->clkout[n].rate != 0) {
|
|
int ret;
|
|
ret = clk_set_rate(drvdata->clkout[n].hw.clk,
|
|
pdata->clkout[n].rate);
|
|
if (ret != 0) {
|
|
dev_err(&client->dev, "Cannot set rate : %d\n",
|
|
ret);
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = of_clk_add_hw_provider(client->dev.of_node, si53351_of_clk_get,
|
|
drvdata);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to add clk provider\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int si5351_i2c_remove(struct i2c_client *client)
|
|
{
|
|
of_clk_del_provider(client->dev.of_node);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id si5351_i2c_ids[] = {
|
|
{ "si5351a", SI5351_VARIANT_A },
|
|
{ "si5351a-msop", SI5351_VARIANT_A3 },
|
|
{ "si5351b", SI5351_VARIANT_B },
|
|
{ "si5351c", SI5351_VARIANT_C },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, si5351_i2c_ids);
|
|
|
|
static struct i2c_driver si5351_driver = {
|
|
.driver = {
|
|
.name = "si5351",
|
|
.of_match_table = of_match_ptr(si5351_dt_ids),
|
|
},
|
|
.probe = si5351_i2c_probe,
|
|
.remove = si5351_i2c_remove,
|
|
.id_table = si5351_i2c_ids,
|
|
};
|
|
module_i2c_driver(si5351_driver);
|
|
|
|
MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com");
|
|
MODULE_DESCRIPTION("Silicon Labs Si5351A/B/C clock generator driver");
|
|
MODULE_LICENSE("GPL");
|