forked from Minki/linux
c0c0d996d0
This updates the powermac SMP code to use the mpic driver instead of the openpic driver and fixes the SMP-dependent context switch code. We had a subtle bug where we were using interrupt numbers 256-259 for IPIs, but ppc32 had NR_IRQS = 256. Moved the IPIs down to use interrupt numbers 252-255 instead. Signed-off-by: Paul Mackerras <paulus@samba.org>
674 lines
19 KiB
C
674 lines
19 KiB
C
/*
|
|
* Support for the interrupt controllers found on Power Macintosh,
|
|
* currently Apple's "Grand Central" interrupt controller in all
|
|
* it's incarnations. OpenPIC support used on newer machines is
|
|
* in a separate file
|
|
*
|
|
* Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
|
|
*
|
|
* Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/init.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/adb.h>
|
|
#include <linux/pmu.h>
|
|
|
|
#include <asm/sections.h>
|
|
#include <asm/io.h>
|
|
#include <asm/smp.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/time.h>
|
|
#include <asm/open_pic.h>
|
|
#include <asm/xmon.h>
|
|
#include <asm/pmac_feature.h>
|
|
#include <asm/mpic.h>
|
|
|
|
#include "pmac_pic.h"
|
|
|
|
/*
|
|
* XXX this should be in xmon.h, but putting it there means xmon.h
|
|
* has to include <linux/interrupt.h> (to get irqreturn_t), which
|
|
* causes all sorts of problems. -- paulus
|
|
*/
|
|
extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
|
|
|
|
struct pmac_irq_hw {
|
|
unsigned int event;
|
|
unsigned int enable;
|
|
unsigned int ack;
|
|
unsigned int level;
|
|
};
|
|
|
|
/* Default addresses */
|
|
static volatile struct pmac_irq_hw *pmac_irq_hw[4] = {
|
|
(struct pmac_irq_hw *) 0xf3000020,
|
|
(struct pmac_irq_hw *) 0xf3000010,
|
|
(struct pmac_irq_hw *) 0xf4000020,
|
|
(struct pmac_irq_hw *) 0xf4000010,
|
|
};
|
|
|
|
#define GC_LEVEL_MASK 0x3ff00000
|
|
#define OHARE_LEVEL_MASK 0x1ff00000
|
|
#define HEATHROW_LEVEL_MASK 0x1ff00000
|
|
|
|
static int max_irqs;
|
|
static int max_real_irqs;
|
|
static u32 level_mask[4];
|
|
|
|
static DEFINE_SPINLOCK(pmac_pic_lock);
|
|
|
|
|
|
#define GATWICK_IRQ_POOL_SIZE 10
|
|
static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
|
|
|
|
/*
|
|
* Mark an irq as "lost". This is only used on the pmac
|
|
* since it can lose interrupts (see pmac_set_irq_mask).
|
|
* -- Cort
|
|
*/
|
|
void
|
|
__set_lost(unsigned long irq_nr, int nokick)
|
|
{
|
|
if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
|
|
atomic_inc(&ppc_n_lost_interrupts);
|
|
if (!nokick)
|
|
set_dec(1);
|
|
}
|
|
}
|
|
|
|
static void
|
|
pmac_mask_and_ack_irq(unsigned int irq_nr)
|
|
{
|
|
unsigned long bit = 1UL << (irq_nr & 0x1f);
|
|
int i = irq_nr >> 5;
|
|
unsigned long flags;
|
|
|
|
if ((unsigned)irq_nr >= max_irqs)
|
|
return;
|
|
|
|
clear_bit(irq_nr, ppc_cached_irq_mask);
|
|
if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
|
|
atomic_dec(&ppc_n_lost_interrupts);
|
|
spin_lock_irqsave(&pmac_pic_lock, flags);
|
|
out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
|
|
out_le32(&pmac_irq_hw[i]->ack, bit);
|
|
do {
|
|
/* make sure ack gets to controller before we enable
|
|
interrupts */
|
|
mb();
|
|
} while((in_le32(&pmac_irq_hw[i]->enable) & bit)
|
|
!= (ppc_cached_irq_mask[i] & bit));
|
|
spin_unlock_irqrestore(&pmac_pic_lock, flags);
|
|
}
|
|
|
|
static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
|
|
{
|
|
unsigned long bit = 1UL << (irq_nr & 0x1f);
|
|
int i = irq_nr >> 5;
|
|
unsigned long flags;
|
|
|
|
if ((unsigned)irq_nr >= max_irqs)
|
|
return;
|
|
|
|
spin_lock_irqsave(&pmac_pic_lock, flags);
|
|
/* enable unmasked interrupts */
|
|
out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
|
|
|
|
do {
|
|
/* make sure mask gets to controller before we
|
|
return to user */
|
|
mb();
|
|
} while((in_le32(&pmac_irq_hw[i]->enable) & bit)
|
|
!= (ppc_cached_irq_mask[i] & bit));
|
|
|
|
/*
|
|
* Unfortunately, setting the bit in the enable register
|
|
* when the device interrupt is already on *doesn't* set
|
|
* the bit in the flag register or request another interrupt.
|
|
*/
|
|
if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
|
|
__set_lost((ulong)irq_nr, nokicklost);
|
|
spin_unlock_irqrestore(&pmac_pic_lock, flags);
|
|
}
|
|
|
|
/* When an irq gets requested for the first client, if it's an
|
|
* edge interrupt, we clear any previous one on the controller
|
|
*/
|
|
static unsigned int pmac_startup_irq(unsigned int irq_nr)
|
|
{
|
|
unsigned long bit = 1UL << (irq_nr & 0x1f);
|
|
int i = irq_nr >> 5;
|
|
|
|
if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
|
|
out_le32(&pmac_irq_hw[i]->ack, bit);
|
|
set_bit(irq_nr, ppc_cached_irq_mask);
|
|
pmac_set_irq_mask(irq_nr, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pmac_mask_irq(unsigned int irq_nr)
|
|
{
|
|
clear_bit(irq_nr, ppc_cached_irq_mask);
|
|
pmac_set_irq_mask(irq_nr, 0);
|
|
mb();
|
|
}
|
|
|
|
static void pmac_unmask_irq(unsigned int irq_nr)
|
|
{
|
|
set_bit(irq_nr, ppc_cached_irq_mask);
|
|
pmac_set_irq_mask(irq_nr, 0);
|
|
}
|
|
|
|
static void pmac_end_irq(unsigned int irq_nr)
|
|
{
|
|
if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
|
|
&& irq_desc[irq_nr].action) {
|
|
set_bit(irq_nr, ppc_cached_irq_mask);
|
|
pmac_set_irq_mask(irq_nr, 1);
|
|
}
|
|
}
|
|
|
|
|
|
struct hw_interrupt_type pmac_pic = {
|
|
.typename = " PMAC-PIC ",
|
|
.startup = pmac_startup_irq,
|
|
.enable = pmac_unmask_irq,
|
|
.disable = pmac_mask_irq,
|
|
.ack = pmac_mask_and_ack_irq,
|
|
.end = pmac_end_irq,
|
|
};
|
|
|
|
struct hw_interrupt_type gatwick_pic = {
|
|
.typename = " GATWICK ",
|
|
.startup = pmac_startup_irq,
|
|
.enable = pmac_unmask_irq,
|
|
.disable = pmac_mask_irq,
|
|
.ack = pmac_mask_and_ack_irq,
|
|
.end = pmac_end_irq,
|
|
};
|
|
|
|
static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
int irq, bits;
|
|
|
|
for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
|
|
int i = irq >> 5;
|
|
bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
|
|
/* We must read level interrupts from the level register */
|
|
bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
|
|
bits &= ppc_cached_irq_mask[i];
|
|
if (bits == 0)
|
|
continue;
|
|
irq += __ilog2(bits);
|
|
__do_IRQ(irq, regs);
|
|
return IRQ_HANDLED;
|
|
}
|
|
printk("gatwick irq not from gatwick pic\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
int
|
|
pmac_get_irq(struct pt_regs *regs)
|
|
{
|
|
int irq;
|
|
unsigned long bits = 0;
|
|
|
|
#ifdef CONFIG_SMP
|
|
void psurge_smp_message_recv(struct pt_regs *);
|
|
|
|
/* IPI's are a hack on the powersurge -- Cort */
|
|
if ( smp_processor_id() != 0 ) {
|
|
psurge_smp_message_recv(regs);
|
|
return -2; /* ignore, already handled */
|
|
}
|
|
#endif /* CONFIG_SMP */
|
|
for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
|
|
int i = irq >> 5;
|
|
bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
|
|
/* We must read level interrupts from the level register */
|
|
bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
|
|
bits &= ppc_cached_irq_mask[i];
|
|
if (bits == 0)
|
|
continue;
|
|
irq += __ilog2(bits);
|
|
break;
|
|
}
|
|
|
|
return irq;
|
|
}
|
|
|
|
/* This routine will fix some missing interrupt values in the device tree
|
|
* on the gatwick mac-io controller used by some PowerBooks
|
|
*/
|
|
static void __init
|
|
pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
|
|
{
|
|
struct device_node *node;
|
|
int count;
|
|
|
|
memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
|
|
node = gw->child;
|
|
count = 0;
|
|
while(node)
|
|
{
|
|
/* Fix SCC */
|
|
if (strcasecmp(node->name, "escc") == 0)
|
|
if (node->child) {
|
|
if (node->child->n_intrs < 3) {
|
|
node->child->intrs = &gatwick_int_pool[count];
|
|
count += 3;
|
|
}
|
|
node->child->n_intrs = 3;
|
|
node->child->intrs[0].line = 15+irq_base;
|
|
node->child->intrs[1].line = 4+irq_base;
|
|
node->child->intrs[2].line = 5+irq_base;
|
|
printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n",
|
|
node->child->intrs[0].line,
|
|
node->child->intrs[1].line,
|
|
node->child->intrs[2].line);
|
|
}
|
|
/* Fix media-bay & left SWIM */
|
|
if (strcasecmp(node->name, "media-bay") == 0) {
|
|
struct device_node* ya_node;
|
|
|
|
if (node->n_intrs == 0)
|
|
node->intrs = &gatwick_int_pool[count++];
|
|
node->n_intrs = 1;
|
|
node->intrs[0].line = 29+irq_base;
|
|
printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n",
|
|
node->intrs[0].line);
|
|
|
|
ya_node = node->child;
|
|
while(ya_node)
|
|
{
|
|
if (strcasecmp(ya_node->name, "floppy") == 0) {
|
|
if (ya_node->n_intrs < 2) {
|
|
ya_node->intrs = &gatwick_int_pool[count];
|
|
count += 2;
|
|
}
|
|
ya_node->n_intrs = 2;
|
|
ya_node->intrs[0].line = 19+irq_base;
|
|
ya_node->intrs[1].line = 1+irq_base;
|
|
printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
|
|
ya_node->intrs[0].line, ya_node->intrs[1].line);
|
|
}
|
|
if (strcasecmp(ya_node->name, "ata4") == 0) {
|
|
if (ya_node->n_intrs < 2) {
|
|
ya_node->intrs = &gatwick_int_pool[count];
|
|
count += 2;
|
|
}
|
|
ya_node->n_intrs = 2;
|
|
ya_node->intrs[0].line = 14+irq_base;
|
|
ya_node->intrs[1].line = 3+irq_base;
|
|
printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
|
|
ya_node->intrs[0].line, ya_node->intrs[1].line);
|
|
}
|
|
ya_node = ya_node->sibling;
|
|
}
|
|
}
|
|
node = node->sibling;
|
|
}
|
|
if (count > 10) {
|
|
printk("WARNING !! Gatwick interrupt pool overflow\n");
|
|
printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
|
|
printk(" requested = %d\n", count);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The PowerBook 3400/2400/3500 can have a combo ethernet/modem
|
|
* card which includes an ohare chip that acts as a second interrupt
|
|
* controller. If we find this second ohare, set it up and fix the
|
|
* interrupt value in the device tree for the ethernet chip.
|
|
*/
|
|
static int __init enable_second_ohare(void)
|
|
{
|
|
unsigned char bus, devfn;
|
|
unsigned short cmd;
|
|
unsigned long addr;
|
|
struct device_node *irqctrler = find_devices("pci106b,7");
|
|
struct device_node *ether;
|
|
|
|
if (irqctrler == NULL || irqctrler->n_addrs <= 0)
|
|
return -1;
|
|
addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40);
|
|
pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20);
|
|
max_irqs = 64;
|
|
if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) {
|
|
struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler);
|
|
if (!hose)
|
|
printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
|
|
else {
|
|
early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
|
|
cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
|
|
cmd &= ~PCI_COMMAND_IO;
|
|
early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
|
|
}
|
|
}
|
|
|
|
/* Fix interrupt for the modem/ethernet combo controller. The number
|
|
in the device tree (27) is bogus (correct for the ethernet-only
|
|
board but not the combo ethernet/modem board).
|
|
The real interrupt is 28 on the second controller -> 28+32 = 60.
|
|
*/
|
|
ether = find_devices("pci1011,14");
|
|
if (ether && ether->n_intrs > 0) {
|
|
ether->intrs[0].line = 60;
|
|
printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
|
|
ether->intrs[0].line);
|
|
}
|
|
|
|
/* Return the interrupt number of the cascade */
|
|
return irqctrler->intrs[0].line;
|
|
}
|
|
|
|
static int pmac_u3_cascade(struct pt_regs *regs, void *data)
|
|
{
|
|
return mpic_get_one_irq((struct mpic *)data, regs);
|
|
}
|
|
|
|
#ifdef CONFIG_XMON
|
|
static struct irqaction xmon_action = {
|
|
.handler = xmon_irq,
|
|
.flags = 0,
|
|
.mask = CPU_MASK_NONE,
|
|
.name = "NMI - XMON"
|
|
};
|
|
#endif
|
|
|
|
static struct irqaction gatwick_cascade_action = {
|
|
.handler = gatwick_action,
|
|
.flags = SA_INTERRUPT,
|
|
.mask = CPU_MASK_NONE,
|
|
.name = "cascade",
|
|
};
|
|
|
|
void __init pmac_pic_init(void)
|
|
{
|
|
int i;
|
|
struct device_node *irqctrler = NULL;
|
|
struct device_node *irqctrler2 = NULL;
|
|
struct device_node *np;
|
|
unsigned long addr;
|
|
int irq_cascade = -1;
|
|
struct mpic *mpic1, *mpic2;
|
|
|
|
/* We first try to detect Apple's new Core99 chipset, since mac-io
|
|
* is quite different on those machines and contains an IBM MPIC2.
|
|
*/
|
|
np = find_type_devices("open-pic");
|
|
while (np) {
|
|
if (np->parent && !strcmp(np->parent->name, "u3"))
|
|
irqctrler2 = np;
|
|
else
|
|
irqctrler = np;
|
|
np = np->next;
|
|
}
|
|
if (irqctrler != NULL && irqctrler->n_addrs > 0) {
|
|
unsigned char senses[128];
|
|
|
|
printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
|
|
(unsigned int)irqctrler->addrs[0].address);
|
|
ppc_md.get_irq = mpic_get_irq;
|
|
pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0);
|
|
|
|
prom_get_irq_senses(senses, 0, 128);
|
|
mpic1 = mpic_alloc(irqctrler->addrs[0].address,
|
|
MPIC_PRIMARY | MPIC_WANTS_RESET,
|
|
0, 0, 128, 252, senses, 128, " OpenPIC ");
|
|
BUG_ON(mpic1 == NULL);
|
|
mpic_init(mpic1);
|
|
|
|
if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
|
|
irqctrler2->n_addrs > 0) {
|
|
printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
|
|
(u32)irqctrler2->addrs[0].address,
|
|
irqctrler2->intrs[0].line);
|
|
|
|
pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
|
|
prom_get_irq_senses(senses, 128, 128 + 124);
|
|
|
|
/* We don't need to set MPIC_BROKEN_U3 here since we don't have
|
|
* hypertransport interrupts routed to it
|
|
*/
|
|
mpic2 = mpic_alloc(irqctrler2->addrs[0].address,
|
|
MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
|
|
0, 128, 124, 0, senses, 124,
|
|
" U3-MPIC ");
|
|
BUG_ON(mpic2 == NULL);
|
|
mpic_init(mpic2);
|
|
mpic_setup_cascade(irqctrler2->intrs[0].line,
|
|
pmac_u3_cascade, mpic2);
|
|
}
|
|
#ifdef CONFIG_XMON
|
|
{
|
|
struct device_node* pswitch;
|
|
int nmi_irq;
|
|
|
|
pswitch = find_devices("programmer-switch");
|
|
if (pswitch && pswitch->n_intrs) {
|
|
nmi_irq = pswitch->intrs[0].line;
|
|
openpic_init_nmi_irq(nmi_irq);
|
|
setup_irq(nmi_irq, &xmon_action);
|
|
}
|
|
}
|
|
#endif /* CONFIG_XMON */
|
|
return;
|
|
}
|
|
irqctrler = NULL;
|
|
|
|
/* Get the level/edge settings, assume if it's not
|
|
* a Grand Central nor an OHare, then it's an Heathrow
|
|
* (or Paddington).
|
|
*/
|
|
if (find_devices("gc"))
|
|
level_mask[0] = GC_LEVEL_MASK;
|
|
else if (find_devices("ohare")) {
|
|
level_mask[0] = OHARE_LEVEL_MASK;
|
|
/* We might have a second cascaded ohare */
|
|
level_mask[1] = OHARE_LEVEL_MASK;
|
|
} else {
|
|
level_mask[0] = HEATHROW_LEVEL_MASK;
|
|
level_mask[1] = 0;
|
|
/* We might have a second cascaded heathrow */
|
|
level_mask[2] = HEATHROW_LEVEL_MASK;
|
|
level_mask[3] = 0;
|
|
}
|
|
|
|
/*
|
|
* G3 powermacs and 1999 G3 PowerBooks have 64 interrupts,
|
|
* 1998 G3 Series PowerBooks have 128,
|
|
* other powermacs have 32.
|
|
* The combo ethernet/modem card for the Powerstar powerbooks
|
|
* (2400/3400/3500, ohare based) has a second ohare chip
|
|
* effectively making a total of 64.
|
|
*/
|
|
max_irqs = max_real_irqs = 32;
|
|
irqctrler = find_devices("mac-io");
|
|
if (irqctrler)
|
|
{
|
|
max_real_irqs = 64;
|
|
if (irqctrler->next)
|
|
max_irqs = 128;
|
|
else
|
|
max_irqs = 64;
|
|
}
|
|
for ( i = 0; i < max_real_irqs ; i++ )
|
|
irq_desc[i].handler = &pmac_pic;
|
|
|
|
/* get addresses of first controller */
|
|
if (irqctrler) {
|
|
if (irqctrler->n_addrs > 0) {
|
|
addr = (unsigned long)
|
|
ioremap(irqctrler->addrs[0].address, 0x40);
|
|
for (i = 0; i < 2; ++i)
|
|
pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
|
|
(addr + (2 - i) * 0x10);
|
|
}
|
|
|
|
/* get addresses of second controller */
|
|
irqctrler = irqctrler->next;
|
|
if (irqctrler && irqctrler->n_addrs > 0) {
|
|
addr = (unsigned long)
|
|
ioremap(irqctrler->addrs[0].address, 0x40);
|
|
for (i = 2; i < 4; ++i)
|
|
pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
|
|
(addr + (4 - i) * 0x10);
|
|
irq_cascade = irqctrler->intrs[0].line;
|
|
if (device_is_compatible(irqctrler, "gatwick"))
|
|
pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs);
|
|
}
|
|
} else {
|
|
/* older powermacs have a GC (grand central) or ohare at
|
|
f3000000, with interrupt control registers at f3000020. */
|
|
addr = (unsigned long) ioremap(0xf3000000, 0x40);
|
|
pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20);
|
|
}
|
|
|
|
/* PowerBooks 3400 and 3500 can have a second controller in a second
|
|
ohare chip, on the combo ethernet/modem card */
|
|
if (machine_is_compatible("AAPL,3400/2400")
|
|
|| machine_is_compatible("AAPL,3500"))
|
|
irq_cascade = enable_second_ohare();
|
|
|
|
/* disable all interrupts in all controllers */
|
|
for (i = 0; i * 32 < max_irqs; ++i)
|
|
out_le32(&pmac_irq_hw[i]->enable, 0);
|
|
/* mark level interrupts */
|
|
for (i = 0; i < max_irqs; i++)
|
|
if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
|
|
irq_desc[i].status = IRQ_LEVEL;
|
|
|
|
/* get interrupt line of secondary interrupt controller */
|
|
if (irq_cascade >= 0) {
|
|
printk(KERN_INFO "irq: secondary controller on irq %d\n",
|
|
(int)irq_cascade);
|
|
for ( i = max_real_irqs ; i < max_irqs ; i++ )
|
|
irq_desc[i].handler = &gatwick_pic;
|
|
setup_irq(irq_cascade, &gatwick_cascade_action);
|
|
}
|
|
printk("System has %d possible interrupts\n", max_irqs);
|
|
if (max_irqs != max_real_irqs)
|
|
printk(KERN_DEBUG "%d interrupts on main controller\n",
|
|
max_real_irqs);
|
|
|
|
#ifdef CONFIG_XMON
|
|
setup_irq(20, &xmon_action);
|
|
#endif /* CONFIG_XMON */
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/*
|
|
* These procedures are used in implementing sleep on the powerbooks.
|
|
* sleep_save_intrs() saves the states of all interrupt enables
|
|
* and disables all interrupts except for the nominated one.
|
|
* sleep_restore_intrs() restores the states of all interrupt enables.
|
|
*/
|
|
unsigned long sleep_save_mask[2];
|
|
|
|
/* This used to be passed by the PMU driver but that link got
|
|
* broken with the new driver model. We use this tweak for now...
|
|
*/
|
|
static int pmacpic_find_viaint(void)
|
|
{
|
|
int viaint = -1;
|
|
|
|
#ifdef CONFIG_ADB_PMU
|
|
struct device_node *np;
|
|
|
|
if (pmu_get_model() != PMU_OHARE_BASED)
|
|
goto not_found;
|
|
np = of_find_node_by_name(NULL, "via-pmu");
|
|
if (np == NULL)
|
|
goto not_found;
|
|
viaint = np->intrs[0].line;
|
|
#endif /* CONFIG_ADB_PMU */
|
|
|
|
not_found:
|
|
return viaint;
|
|
}
|
|
|
|
static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
|
|
{
|
|
int viaint = pmacpic_find_viaint();
|
|
|
|
sleep_save_mask[0] = ppc_cached_irq_mask[0];
|
|
sleep_save_mask[1] = ppc_cached_irq_mask[1];
|
|
ppc_cached_irq_mask[0] = 0;
|
|
ppc_cached_irq_mask[1] = 0;
|
|
if (viaint > 0)
|
|
set_bit(viaint, ppc_cached_irq_mask);
|
|
out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]);
|
|
if (max_real_irqs > 32)
|
|
out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]);
|
|
(void)in_le32(&pmac_irq_hw[0]->event);
|
|
/* make sure mask gets to controller before we return to caller */
|
|
mb();
|
|
(void)in_le32(&pmac_irq_hw[0]->enable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pmacpic_resume(struct sys_device *sysdev)
|
|
{
|
|
int i;
|
|
|
|
out_le32(&pmac_irq_hw[0]->enable, 0);
|
|
if (max_real_irqs > 32)
|
|
out_le32(&pmac_irq_hw[1]->enable, 0);
|
|
mb();
|
|
for (i = 0; i < max_real_irqs; ++i)
|
|
if (test_bit(i, sleep_save_mask))
|
|
pmac_unmask_irq(i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct sysdev_class pmacpic_sysclass = {
|
|
set_kset_name("pmac_pic"),
|
|
};
|
|
|
|
static struct sys_device device_pmacpic = {
|
|
.id = 0,
|
|
.cls = &pmacpic_sysclass,
|
|
};
|
|
|
|
static struct sysdev_driver driver_pmacpic = {
|
|
#ifdef CONFIG_PM
|
|
.suspend = &pmacpic_suspend,
|
|
.resume = &pmacpic_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
static int __init init_pmacpic_sysfs(void)
|
|
{
|
|
if (max_irqs == 0)
|
|
return -ENODEV;
|
|
|
|
printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
|
|
sysdev_class_register(&pmacpic_sysclass);
|
|
sysdev_register(&device_pmacpic);
|
|
sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(init_pmacpic_sysfs);
|
|
|