forked from Minki/linux
c0949b2785
This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits. TASCAM FireWire series consists of: * PDI 1394P23 for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * XILINX XC9536XL * XILINX Spartan-II XC2S100 * ATMEL AT91M42800A Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam A part of my work are based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels. I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may work. Or adding another node on the bus. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
150 lines
4.4 KiB
Plaintext
150 lines
4.4 KiB
Plaintext
menuconfig SND_FIREWIRE
|
|
bool "FireWire sound devices"
|
|
depends on FIREWIRE
|
|
default y
|
|
help
|
|
Support for IEEE-1394/FireWire/iLink sound devices.
|
|
|
|
if SND_FIREWIRE && FIREWIRE
|
|
|
|
config SND_FIREWIRE_LIB
|
|
tristate
|
|
select SND_PCM
|
|
select SND_RAWMIDI
|
|
|
|
config SND_DICE
|
|
tristate "DICE-based DACs support"
|
|
select SND_HWDEP
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for many DACs based on the DICE
|
|
chip family (DICE-II/Jr/Mini) which TC Applied Technologies produces.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-dice.
|
|
|
|
config SND_OXFW
|
|
tristate "Oxford Semiconductor FW970/971 chipset support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based on
|
|
Oxford Semiconductor FW970/971 chipset.
|
|
* Griffin Firewave
|
|
* LaCie Firewire Speakers
|
|
* Behringer F-Control Audio 202
|
|
* Mackie(Loud) Onyx-i series (former models)
|
|
* Mackie(Loud) Onyx Satellite
|
|
* Mackie(Loud) Tapco Link.Firewire
|
|
* Mackie(Loud) d.2 pro/d.4 pro
|
|
* Mackie(Loud) U.420/U.420d
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-oxfw.
|
|
|
|
config SND_ISIGHT
|
|
tristate "Apple iSight microphone"
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the front and rear microphones
|
|
of the Apple iSight web camera.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-isight.
|
|
|
|
config SND_SCS1X
|
|
tristate "Stanton Control System 1 MIDI"
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the MIDI ports of the Stanton
|
|
SCS.1d/SCS.1m DJ controllers. (SCS.1m audio is still handled
|
|
by FFADO.)
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-scs1x.
|
|
|
|
config SND_FIREWORKS
|
|
tristate "Echo Fireworks board module support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on Echo Digital Audio Fireworks board:
|
|
* Mackie Onyx 400F/1200F
|
|
* Echo AudioFire12/8(until 2009 July)
|
|
* Echo AudioFire2/4/Pre8/8(since 2009 July)
|
|
* Echo Fireworks 8/HDMI
|
|
* Gibson Robot Interface Pack/GoldTop
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-fireworks.
|
|
|
|
config SND_BEBOB
|
|
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
|
|
* Edirol FA-66/FA-101
|
|
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
|
|
* BridgeCo RDAudio1/Audio5
|
|
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
|
|
* Mackie d.2 (FireWire Option)
|
|
* Stanton FinalScratch 2 (ScratchAmp)
|
|
* Tascam IF-FW/DM
|
|
* Behringer XENIX UFX 1204/1604
|
|
* Behringer Digital Mixer X32 series (X-UF Card)
|
|
* Behringer FCA610/1616
|
|
* Apogee Rosetta 200/400 (X-FireWire card)
|
|
* Apogee DA/AD/DD-16X (X-FireWire card)
|
|
* Apogee Ensemble
|
|
* ESI QuataFire 610
|
|
* AcousticReality eARMasterOne
|
|
* CME MatrixKFW
|
|
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
|
|
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
|
|
* Lynx Aurora 8/16 (LT-FW)
|
|
* ICON FireXon
|
|
* PrismSound Orpheus/ADA-8XR
|
|
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
|
|
* TerraTec EWS MIC2/EWS MIC8
|
|
* TerraTec Aureon 7.1 FireWire
|
|
* Yamaha GO44/GO46
|
|
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
|
|
* M-Audio FireWire410/AudioPhile/Solo
|
|
* M-Audio Ozonic/NRV10/ProfireLightBridge
|
|
* M-Audio FireWire 1814/ProjectMix IO
|
|
* Digidesign Mbox 2 Pro
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-bebob.
|
|
|
|
config SND_FIREWIRE_DIGI00X
|
|
tristate "Digidesign Digi 002/003 family support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for Digidesign Digi 002/003 family.
|
|
* Digi 002 Console
|
|
* Digi 002 Rack
|
|
* Digi 003 Console
|
|
* Digi 003 Rack
|
|
* Digi 003 Rack+
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-digi00x.
|
|
|
|
config SND_FIREWIRE_TASCAM
|
|
tristate "TASCAM FireWire series support"
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for TASCAM.
|
|
* FW-1884
|
|
* FW-1082
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-tascam.
|
|
|
|
endif # SND_FIREWIRE
|