forked from Minki/linux
bffcd33313
We found the buck voltage may not be exactly the same with what we set because CPU may share the same buck with other module. Therefore, we need to record the previous desired value instead of reading it from regulators. Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com> Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
625 lines
16 KiB
C
625 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2015 Linaro Ltd.
|
|
* Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#define MIN_VOLT_SHIFT (100000)
|
|
#define MAX_VOLT_SHIFT (200000)
|
|
#define MAX_VOLT_LIMIT (1150000)
|
|
#define VOLT_TOL (10000)
|
|
|
|
/*
|
|
* The struct mtk_cpu_dvfs_info holds necessary information for doing CPU DVFS
|
|
* on each CPU power/clock domain of Mediatek SoCs. Each CPU cluster in
|
|
* Mediatek SoCs has two voltage inputs, Vproc and Vsram. In some cases the two
|
|
* voltage inputs need to be controlled under a hardware limitation:
|
|
* 100mV < Vsram - Vproc < 200mV
|
|
*
|
|
* When scaling the clock frequency of a CPU clock domain, the clock source
|
|
* needs to be switched to another stable PLL clock temporarily until
|
|
* the original PLL becomes stable at target frequency.
|
|
*/
|
|
struct mtk_cpu_dvfs_info {
|
|
struct cpumask cpus;
|
|
struct device *cpu_dev;
|
|
struct regulator *proc_reg;
|
|
struct regulator *sram_reg;
|
|
struct clk *cpu_clk;
|
|
struct clk *inter_clk;
|
|
struct list_head list_head;
|
|
int intermediate_voltage;
|
|
bool need_voltage_tracking;
|
|
int pre_vproc;
|
|
};
|
|
|
|
static LIST_HEAD(dvfs_info_list);
|
|
|
|
static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu)
|
|
{
|
|
struct mtk_cpu_dvfs_info *info;
|
|
|
|
list_for_each_entry(info, &dvfs_info_list, list_head) {
|
|
if (cpumask_test_cpu(cpu, &info->cpus))
|
|
return info;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
|
|
int new_vproc)
|
|
{
|
|
struct regulator *proc_reg = info->proc_reg;
|
|
struct regulator *sram_reg = info->sram_reg;
|
|
int pre_vproc, pre_vsram, new_vsram, vsram, vproc, ret;
|
|
|
|
pre_vproc = regulator_get_voltage(proc_reg);
|
|
if (pre_vproc < 0) {
|
|
dev_err(info->cpu_dev,
|
|
"invalid Vproc value: %d\n", pre_vproc);
|
|
return pre_vproc;
|
|
}
|
|
/* Vsram should not exceed the maximum allowed voltage of SoC. */
|
|
new_vsram = min(new_vproc + MIN_VOLT_SHIFT, MAX_VOLT_LIMIT);
|
|
|
|
if (pre_vproc < new_vproc) {
|
|
/*
|
|
* When scaling up voltages, Vsram and Vproc scale up step
|
|
* by step. At each step, set Vsram to (Vproc + 200mV) first,
|
|
* then set Vproc to (Vsram - 100mV).
|
|
* Keep doing it until Vsram and Vproc hit target voltages.
|
|
*/
|
|
do {
|
|
pre_vsram = regulator_get_voltage(sram_reg);
|
|
if (pre_vsram < 0) {
|
|
dev_err(info->cpu_dev,
|
|
"invalid Vsram value: %d\n", pre_vsram);
|
|
return pre_vsram;
|
|
}
|
|
pre_vproc = regulator_get_voltage(proc_reg);
|
|
if (pre_vproc < 0) {
|
|
dev_err(info->cpu_dev,
|
|
"invalid Vproc value: %d\n", pre_vproc);
|
|
return pre_vproc;
|
|
}
|
|
|
|
vsram = min(new_vsram, pre_vproc + MAX_VOLT_SHIFT);
|
|
|
|
if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) {
|
|
vsram = MAX_VOLT_LIMIT;
|
|
|
|
/*
|
|
* If the target Vsram hits the maximum voltage,
|
|
* try to set the exact voltage value first.
|
|
*/
|
|
ret = regulator_set_voltage(sram_reg, vsram,
|
|
vsram);
|
|
if (ret)
|
|
ret = regulator_set_voltage(sram_reg,
|
|
vsram - VOLT_TOL,
|
|
vsram);
|
|
|
|
vproc = new_vproc;
|
|
} else {
|
|
ret = regulator_set_voltage(sram_reg, vsram,
|
|
vsram + VOLT_TOL);
|
|
|
|
vproc = vsram - MIN_VOLT_SHIFT;
|
|
}
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_set_voltage(proc_reg, vproc,
|
|
vproc + VOLT_TOL);
|
|
if (ret) {
|
|
regulator_set_voltage(sram_reg, pre_vsram,
|
|
pre_vsram);
|
|
return ret;
|
|
}
|
|
} while (vproc < new_vproc || vsram < new_vsram);
|
|
} else if (pre_vproc > new_vproc) {
|
|
/*
|
|
* When scaling down voltages, Vsram and Vproc scale down step
|
|
* by step. At each step, set Vproc to (Vsram - 200mV) first,
|
|
* then set Vproc to (Vproc + 100mV).
|
|
* Keep doing it until Vsram and Vproc hit target voltages.
|
|
*/
|
|
do {
|
|
pre_vproc = regulator_get_voltage(proc_reg);
|
|
if (pre_vproc < 0) {
|
|
dev_err(info->cpu_dev,
|
|
"invalid Vproc value: %d\n", pre_vproc);
|
|
return pre_vproc;
|
|
}
|
|
pre_vsram = regulator_get_voltage(sram_reg);
|
|
if (pre_vsram < 0) {
|
|
dev_err(info->cpu_dev,
|
|
"invalid Vsram value: %d\n", pre_vsram);
|
|
return pre_vsram;
|
|
}
|
|
|
|
vproc = max(new_vproc, pre_vsram - MAX_VOLT_SHIFT);
|
|
ret = regulator_set_voltage(proc_reg, vproc,
|
|
vproc + VOLT_TOL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (vproc == new_vproc)
|
|
vsram = new_vsram;
|
|
else
|
|
vsram = max(new_vsram, vproc + MIN_VOLT_SHIFT);
|
|
|
|
if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) {
|
|
vsram = MAX_VOLT_LIMIT;
|
|
|
|
/*
|
|
* If the target Vsram hits the maximum voltage,
|
|
* try to set the exact voltage value first.
|
|
*/
|
|
ret = regulator_set_voltage(sram_reg, vsram,
|
|
vsram);
|
|
if (ret)
|
|
ret = regulator_set_voltage(sram_reg,
|
|
vsram - VOLT_TOL,
|
|
vsram);
|
|
} else {
|
|
ret = regulator_set_voltage(sram_reg, vsram,
|
|
vsram + VOLT_TOL);
|
|
}
|
|
|
|
if (ret) {
|
|
regulator_set_voltage(proc_reg, pre_vproc,
|
|
pre_vproc);
|
|
return ret;
|
|
}
|
|
} while (vproc > new_vproc + VOLT_TOL ||
|
|
vsram > new_vsram + VOLT_TOL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_cpufreq_set_voltage(struct mtk_cpu_dvfs_info *info, int vproc)
|
|
{
|
|
int ret;
|
|
|
|
if (info->need_voltage_tracking)
|
|
ret = mtk_cpufreq_voltage_tracking(info, vproc);
|
|
else
|
|
ret = regulator_set_voltage(info->proc_reg, vproc,
|
|
MAX_VOLT_LIMIT);
|
|
if (!ret)
|
|
info->pre_vproc = vproc;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
|
|
unsigned int index)
|
|
{
|
|
struct cpufreq_frequency_table *freq_table = policy->freq_table;
|
|
struct clk *cpu_clk = policy->clk;
|
|
struct clk *armpll = clk_get_parent(cpu_clk);
|
|
struct mtk_cpu_dvfs_info *info = policy->driver_data;
|
|
struct device *cpu_dev = info->cpu_dev;
|
|
struct dev_pm_opp *opp;
|
|
long freq_hz, pre_freq_hz;
|
|
int vproc, pre_vproc, inter_vproc, target_vproc, ret;
|
|
|
|
inter_vproc = info->intermediate_voltage;
|
|
|
|
pre_freq_hz = clk_get_rate(cpu_clk);
|
|
|
|
if (unlikely(info->pre_vproc <= 0))
|
|
pre_vproc = regulator_get_voltage(info->proc_reg);
|
|
else
|
|
pre_vproc = info->pre_vproc;
|
|
|
|
if (pre_vproc < 0) {
|
|
dev_err(cpu_dev, "invalid Vproc value: %d\n", pre_vproc);
|
|
return pre_vproc;
|
|
}
|
|
|
|
freq_hz = freq_table[index].frequency * 1000;
|
|
|
|
opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
|
|
if (IS_ERR(opp)) {
|
|
dev_err(cpu_dev, "cpu%d: failed to find OPP for %ld\n",
|
|
policy->cpu, freq_hz);
|
|
return PTR_ERR(opp);
|
|
}
|
|
vproc = dev_pm_opp_get_voltage(opp);
|
|
dev_pm_opp_put(opp);
|
|
|
|
/*
|
|
* If the new voltage or the intermediate voltage is higher than the
|
|
* current voltage, scale up voltage first.
|
|
*/
|
|
target_vproc = (inter_vproc > vproc) ? inter_vproc : vproc;
|
|
if (pre_vproc < target_vproc) {
|
|
ret = mtk_cpufreq_set_voltage(info, target_vproc);
|
|
if (ret) {
|
|
dev_err(cpu_dev,
|
|
"cpu%d: failed to scale up voltage!\n", policy->cpu);
|
|
mtk_cpufreq_set_voltage(info, pre_vproc);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Reparent the CPU clock to intermediate clock. */
|
|
ret = clk_set_parent(cpu_clk, info->inter_clk);
|
|
if (ret) {
|
|
dev_err(cpu_dev,
|
|
"cpu%d: failed to re-parent cpu clock!\n", policy->cpu);
|
|
mtk_cpufreq_set_voltage(info, pre_vproc);
|
|
WARN_ON(1);
|
|
return ret;
|
|
}
|
|
|
|
/* Set the original PLL to target rate. */
|
|
ret = clk_set_rate(armpll, freq_hz);
|
|
if (ret) {
|
|
dev_err(cpu_dev,
|
|
"cpu%d: failed to scale cpu clock rate!\n", policy->cpu);
|
|
clk_set_parent(cpu_clk, armpll);
|
|
mtk_cpufreq_set_voltage(info, pre_vproc);
|
|
return ret;
|
|
}
|
|
|
|
/* Set parent of CPU clock back to the original PLL. */
|
|
ret = clk_set_parent(cpu_clk, armpll);
|
|
if (ret) {
|
|
dev_err(cpu_dev,
|
|
"cpu%d: failed to re-parent cpu clock!\n", policy->cpu);
|
|
mtk_cpufreq_set_voltage(info, inter_vproc);
|
|
WARN_ON(1);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* If the new voltage is lower than the intermediate voltage or the
|
|
* original voltage, scale down to the new voltage.
|
|
*/
|
|
if (vproc < inter_vproc || vproc < pre_vproc) {
|
|
ret = mtk_cpufreq_set_voltage(info, vproc);
|
|
if (ret) {
|
|
dev_err(cpu_dev,
|
|
"cpu%d: failed to scale down voltage!\n", policy->cpu);
|
|
clk_set_parent(cpu_clk, info->inter_clk);
|
|
clk_set_rate(armpll, pre_freq_hz);
|
|
clk_set_parent(cpu_clk, armpll);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define DYNAMIC_POWER "dynamic-power-coefficient"
|
|
|
|
static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
|
|
{
|
|
struct device *cpu_dev;
|
|
struct dev_pm_opp *opp;
|
|
unsigned long rate;
|
|
int ret;
|
|
|
|
cpu_dev = get_cpu_device(cpu);
|
|
if (!cpu_dev) {
|
|
dev_err(cpu_dev, "failed to get cpu%d device\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
info->cpu_dev = cpu_dev;
|
|
|
|
info->cpu_clk = clk_get(cpu_dev, "cpu");
|
|
if (IS_ERR(info->cpu_clk)) {
|
|
ret = PTR_ERR(info->cpu_clk);
|
|
return dev_err_probe(cpu_dev, ret,
|
|
"cpu%d: failed to get cpu clk\n", cpu);
|
|
}
|
|
|
|
info->inter_clk = clk_get(cpu_dev, "intermediate");
|
|
if (IS_ERR(info->inter_clk)) {
|
|
ret = PTR_ERR(info->inter_clk);
|
|
dev_err_probe(cpu_dev, ret,
|
|
"cpu%d: failed to get intermediate clk\n", cpu);
|
|
goto out_free_resources;
|
|
}
|
|
|
|
info->proc_reg = regulator_get_optional(cpu_dev, "proc");
|
|
if (IS_ERR(info->proc_reg)) {
|
|
ret = PTR_ERR(info->proc_reg);
|
|
dev_err_probe(cpu_dev, ret,
|
|
"cpu%d: failed to get proc regulator\n", cpu);
|
|
goto out_free_resources;
|
|
}
|
|
|
|
ret = regulator_enable(info->proc_reg);
|
|
if (ret) {
|
|
dev_warn(cpu_dev, "cpu%d: failed to enable vproc\n", cpu);
|
|
goto out_free_resources;
|
|
}
|
|
|
|
/* Both presence and absence of sram regulator are valid cases. */
|
|
info->sram_reg = regulator_get_exclusive(cpu_dev, "sram");
|
|
if (IS_ERR(info->sram_reg))
|
|
info->sram_reg = NULL;
|
|
else {
|
|
ret = regulator_enable(info->sram_reg);
|
|
if (ret) {
|
|
dev_warn(cpu_dev, "cpu%d: failed to enable vsram\n", cpu);
|
|
goto out_free_resources;
|
|
}
|
|
}
|
|
|
|
/* Get OPP-sharing information from "operating-points-v2" bindings */
|
|
ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, &info->cpus);
|
|
if (ret) {
|
|
dev_err(cpu_dev,
|
|
"cpu%d: failed to get OPP-sharing information\n", cpu);
|
|
goto out_free_resources;
|
|
}
|
|
|
|
ret = dev_pm_opp_of_cpumask_add_table(&info->cpus);
|
|
if (ret) {
|
|
dev_warn(cpu_dev, "cpu%d: no OPP table\n", cpu);
|
|
goto out_free_resources;
|
|
}
|
|
|
|
ret = clk_prepare_enable(info->cpu_clk);
|
|
if (ret)
|
|
goto out_free_opp_table;
|
|
|
|
ret = clk_prepare_enable(info->inter_clk);
|
|
if (ret)
|
|
goto out_disable_mux_clock;
|
|
|
|
/* Search a safe voltage for intermediate frequency. */
|
|
rate = clk_get_rate(info->inter_clk);
|
|
opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate);
|
|
if (IS_ERR(opp)) {
|
|
dev_err(cpu_dev, "cpu%d: failed to get intermediate opp\n", cpu);
|
|
ret = PTR_ERR(opp);
|
|
goto out_disable_inter_clock;
|
|
}
|
|
info->intermediate_voltage = dev_pm_opp_get_voltage(opp);
|
|
dev_pm_opp_put(opp);
|
|
|
|
/*
|
|
* If SRAM regulator is present, software "voltage tracking" is needed
|
|
* for this CPU power domain.
|
|
*/
|
|
info->need_voltage_tracking = (info->sram_reg != NULL);
|
|
|
|
return 0;
|
|
|
|
out_disable_inter_clock:
|
|
clk_disable_unprepare(info->inter_clk);
|
|
|
|
out_disable_mux_clock:
|
|
clk_disable_unprepare(info->cpu_clk);
|
|
|
|
out_free_opp_table:
|
|
dev_pm_opp_of_cpumask_remove_table(&info->cpus);
|
|
|
|
out_free_resources:
|
|
if (regulator_is_enabled(info->proc_reg))
|
|
regulator_disable(info->proc_reg);
|
|
if (info->sram_reg && regulator_is_enabled(info->sram_reg))
|
|
regulator_disable(info->sram_reg);
|
|
|
|
if (!IS_ERR(info->proc_reg))
|
|
regulator_put(info->proc_reg);
|
|
if (!IS_ERR(info->sram_reg))
|
|
regulator_put(info->sram_reg);
|
|
if (!IS_ERR(info->cpu_clk))
|
|
clk_put(info->cpu_clk);
|
|
if (!IS_ERR(info->inter_clk))
|
|
clk_put(info->inter_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info)
|
|
{
|
|
if (!IS_ERR(info->proc_reg)) {
|
|
regulator_disable(info->proc_reg);
|
|
regulator_put(info->proc_reg);
|
|
}
|
|
if (!IS_ERR(info->sram_reg)) {
|
|
regulator_disable(info->sram_reg);
|
|
regulator_put(info->sram_reg);
|
|
}
|
|
if (!IS_ERR(info->cpu_clk)) {
|
|
clk_disable_unprepare(info->cpu_clk);
|
|
clk_put(info->cpu_clk);
|
|
}
|
|
if (!IS_ERR(info->inter_clk)) {
|
|
clk_disable_unprepare(info->inter_clk);
|
|
clk_put(info->inter_clk);
|
|
}
|
|
|
|
dev_pm_opp_of_cpumask_remove_table(&info->cpus);
|
|
}
|
|
|
|
static int mtk_cpufreq_init(struct cpufreq_policy *policy)
|
|
{
|
|
struct mtk_cpu_dvfs_info *info;
|
|
struct cpufreq_frequency_table *freq_table;
|
|
int ret;
|
|
|
|
info = mtk_cpu_dvfs_info_lookup(policy->cpu);
|
|
if (!info) {
|
|
dev_err(info->cpu_dev,
|
|
"dvfs info for cpu%d is not initialized.\n", policy->cpu);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = dev_pm_opp_init_cpufreq_table(info->cpu_dev, &freq_table);
|
|
if (ret) {
|
|
dev_err(info->cpu_dev,
|
|
"failed to init cpufreq table for cpu%d: %d\n",
|
|
policy->cpu, ret);
|
|
return ret;
|
|
}
|
|
|
|
cpumask_copy(policy->cpus, &info->cpus);
|
|
policy->freq_table = freq_table;
|
|
policy->driver_data = info;
|
|
policy->clk = info->cpu_clk;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
|
|
{
|
|
struct mtk_cpu_dvfs_info *info = policy->driver_data;
|
|
|
|
dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct cpufreq_driver mtk_cpufreq_driver = {
|
|
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
|
|
CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
|
|
CPUFREQ_IS_COOLING_DEV,
|
|
.verify = cpufreq_generic_frequency_table_verify,
|
|
.target_index = mtk_cpufreq_set_target,
|
|
.get = cpufreq_generic_get,
|
|
.init = mtk_cpufreq_init,
|
|
.exit = mtk_cpufreq_exit,
|
|
.register_em = cpufreq_register_em_with_opp,
|
|
.name = "mtk-cpufreq",
|
|
.attr = cpufreq_generic_attr,
|
|
};
|
|
|
|
static int mtk_cpufreq_probe(struct platform_device *pdev)
|
|
{
|
|
struct mtk_cpu_dvfs_info *info, *tmp;
|
|
int cpu, ret;
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
info = mtk_cpu_dvfs_info_lookup(cpu);
|
|
if (info)
|
|
continue;
|
|
|
|
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
|
if (!info) {
|
|
ret = -ENOMEM;
|
|
goto release_dvfs_info_list;
|
|
}
|
|
|
|
ret = mtk_cpu_dvfs_info_init(info, cpu);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"failed to initialize dvfs info for cpu%d\n",
|
|
cpu);
|
|
goto release_dvfs_info_list;
|
|
}
|
|
|
|
list_add(&info->list_head, &dvfs_info_list);
|
|
}
|
|
|
|
ret = cpufreq_register_driver(&mtk_cpufreq_driver);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register mtk cpufreq driver\n");
|
|
goto release_dvfs_info_list;
|
|
}
|
|
|
|
return 0;
|
|
|
|
release_dvfs_info_list:
|
|
list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) {
|
|
mtk_cpu_dvfs_info_release(info);
|
|
list_del(&info->list_head);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver mtk_cpufreq_platdrv = {
|
|
.driver = {
|
|
.name = "mtk-cpufreq",
|
|
},
|
|
.probe = mtk_cpufreq_probe,
|
|
};
|
|
|
|
/* List of machines supported by this driver */
|
|
static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
|
|
{ .compatible = "mediatek,mt2701", },
|
|
{ .compatible = "mediatek,mt2712", },
|
|
{ .compatible = "mediatek,mt7622", },
|
|
{ .compatible = "mediatek,mt7623", },
|
|
{ .compatible = "mediatek,mt8167", },
|
|
{ .compatible = "mediatek,mt817x", },
|
|
{ .compatible = "mediatek,mt8173", },
|
|
{ .compatible = "mediatek,mt8176", },
|
|
{ .compatible = "mediatek,mt8183", },
|
|
{ .compatible = "mediatek,mt8365", },
|
|
{ .compatible = "mediatek,mt8516", },
|
|
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mtk_cpufreq_machines);
|
|
|
|
static int __init mtk_cpufreq_driver_init(void)
|
|
{
|
|
struct device_node *np;
|
|
const struct of_device_id *match;
|
|
struct platform_device *pdev;
|
|
int err;
|
|
|
|
np = of_find_node_by_path("/");
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
match = of_match_node(mtk_cpufreq_machines, np);
|
|
of_node_put(np);
|
|
if (!match) {
|
|
pr_debug("Machine is not compatible with mtk-cpufreq\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
err = platform_driver_register(&mtk_cpufreq_platdrv);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* Since there's no place to hold device registration code and no
|
|
* device tree based way to match cpufreq driver yet, both the driver
|
|
* and the device registration codes are put here to handle defer
|
|
* probing.
|
|
*/
|
|
pdev = platform_device_register_simple("mtk-cpufreq", -1, NULL, 0);
|
|
if (IS_ERR(pdev)) {
|
|
pr_err("failed to register mtk-cpufreq platform device\n");
|
|
platform_driver_unregister(&mtk_cpufreq_platdrv);
|
|
return PTR_ERR(pdev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
module_init(mtk_cpufreq_driver_init)
|
|
|
|
static void __exit mtk_cpufreq_driver_exit(void)
|
|
{
|
|
platform_driver_unregister(&mtk_cpufreq_platdrv);
|
|
}
|
|
module_exit(mtk_cpufreq_driver_exit)
|
|
|
|
MODULE_DESCRIPTION("MediaTek CPUFreq driver");
|
|
MODULE_AUTHOR("Pi-Cheng Chen <pi-cheng.chen@linaro.org>");
|
|
MODULE_LICENSE("GPL v2");
|