forked from Minki/linux
88a99886c2
cycle Core changes: - It is possible configure groups in debugfs. - Consolidation of chained IRQ handler install/remove replacing all call sites where irq_set_handler_data() and irq_set_chained_handler() were done in succession with a combined call to irq_set_chained_handler_and_data(). This series was created by Thomas Gleixner after the problem was observed by Russell King. - Tglx also made another series of patches switching __irq_set_handler_locked() for irq_set_handler_locked() which is way cleaner. - Tglx also wrote a good bunch of patches to make use of irq_desc_get_xxx() accessors and avoid looking up irq_descs from IRQ numbers. The goal is to get rid of the irq number from the handlers in the IRQ flow which is nice. Driver feature enhancements: - Power management support for the SiRF SoC Atlas 7. - Power down support for the Qualcomm driver. - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks in IRQ handlers to play nice with the realtime patch set. - Rework and new modes handling for Qualcomm SPMI-MPP. - Pinconf power source config for SH PFC. New drivers and subdrivers: - A new driver for Conexant Digicolor CX92755. - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support. - Reverse-egineered the S/PDIF settings for the Allwinner sun4i driver. - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs - A new Freescale i.mx6ul subdriver. Cleanup: - Remove platform data support in a number of SH PFC subdrivers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV6YzgAAoJEEEQszewGV1zbIAQAILzMrzWkxsy7bhvL4QdP5/K OG3EodE//AE0G5gKugUDjg5t2lftdiIJVhjDA17ruETCSciuAxZSLThlMy1sQgyN LPxy9LlCrmsqrYt9+fmJ9js8j52RBJikKK0RUyUVz0VojTBplRpElyEx/KxwM5sG Hy3+hU61uKO0j9AyIcsa/RKP6SGavwZdHytJBsHNw+pODyE3UZCf52ChAVBsTPfE MV70g3Qzfqur7ZFqcNgtUV7qCyYvlF12ooiihrGFDOsTL3sSq4/OXB7z1z1mGGHL Dgq8pXJ6EIZlCbk+jFMTzPRSzy46dxNai0eErjTUVEldH1tOphzGMvKmOdm/nczH 4M/UOWOKBE1aOYZNPtnUgDy2MRt5K9VJStCNSHEQCB2lGdojNAtmj2cmr8flBN5m gM9FDpIS1/C+OYYTkOY9ftPsH5zOk7sCLEHSH5USYRGJHihzLnkV90eiN6a7vlF1 hyTGrIyl6e//E5JBgamjnR3+fYuxQGr6WeAZEP/gXZRm7BCKCaPwCarq+kPZVG4A nolZ/QQN6XYPSlveSPU97VYvLYEUvXaKN0Hf2DTbwkqvNFp7JORD65QLESPtQoIp x95iHMdB/1+0OfgOqMmlOtKpOKREeQ/R+KWACxsrr5Rfv3/7CP4BMRGypIZ/iPmz HWoyDI4lIebBR+JnjMjK =4QFX -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.3 development cycle. Like with GPIO it's a lot of stuff. If my subsystems are any sign of the overall tempo of the kernel v4.3 will be a gigantic diff. [ It looks like 4.3 is calmer than 4.2 in most other subsystems, but we'll see - Linus ] Core changes: - It is possible configure groups in debugfs. - Consolidation of chained IRQ handler install/remove replacing all call sites where irq_set_handler_data() and irq_set_chained_handler() were done in succession with a combined call to irq_set_chained_handler_and_data(). This series was created by Thomas Gleixner after the problem was observed by Russell King. - Tglx also made another series of patches switching __irq_set_handler_locked() for irq_set_handler_locked() which is way cleaner. - Tglx also wrote a good bunch of patches to make use of irq_desc_get_xxx() accessors and avoid looking up irq_descs from IRQ numbers. The goal is to get rid of the irq number from the handlers in the IRQ flow which is nice. Driver feature enhancements: - Power management support for the SiRF SoC Atlas 7. - Power down support for the Qualcomm driver. - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks in IRQ handlers to play nice with the realtime patch set. - Rework and new modes handling for Qualcomm SPMI-MPP. - Pinconf power source config for SH PFC. New drivers and subdrivers: - A new driver for Conexant Digicolor CX92755. - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support. - Reverse-egineered the S/PDIF settings for the Allwinner sun4i driver. - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs - A new Freescale i.mx6ul subdriver. Cleanup: - Remove platform data support in a number of SH PFC subdrivers" * tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits) pinctrl: at91: fix null pointer dereference pinctrl: mediatek: Implement wake handler and suspend resume pinctrl: mediatek: Fix multiple registration issue. pinctrl: sh-pfc: r8a7794: add USB pin groups pinctrl: at91: Use generic irq_{request,release}_resources() pinctrl: cherryview: Use raw_spinlock for locking pinctrl: baytrail: Use raw_spinlock for locking pinctrl: imx6ul: Remove .owner field pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks pinctrl: sun4i: add spdif to pin description. pinctrl: atlas7: clear ugly branch statements for pull and drivestrength pinctrl: baytrail: Serialize all register access pinctrl: baytrail: Drop FSF mailing address pinctrl: rockchip: only enable gpio clock when it setting pinctrl/mediatek: fix spelling mistake in dev_err error message pinctrl: cherryview: Serialize all register access pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting pinctrl: nomadik: reflect current input value ...
330 lines
9.8 KiB
C
330 lines
9.8 KiB
C
/*
|
|
* SuperH Pin Function Controller Support
|
|
*
|
|
* Copyright (c) 2008 Magnus Damm
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
|
|
#ifndef __SH_PFC_H
|
|
#define __SH_PFC_H
|
|
|
|
#include <linux/bug.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/stringify.h>
|
|
|
|
enum {
|
|
PINMUX_TYPE_NONE,
|
|
PINMUX_TYPE_FUNCTION,
|
|
PINMUX_TYPE_GPIO,
|
|
PINMUX_TYPE_OUTPUT,
|
|
PINMUX_TYPE_INPUT,
|
|
};
|
|
|
|
#define SH_PFC_PIN_CFG_INPUT (1 << 0)
|
|
#define SH_PFC_PIN_CFG_OUTPUT (1 << 1)
|
|
#define SH_PFC_PIN_CFG_PULL_UP (1 << 2)
|
|
#define SH_PFC_PIN_CFG_PULL_DOWN (1 << 3)
|
|
#define SH_PFC_PIN_CFG_IO_VOLTAGE (1 << 4)
|
|
#define SH_PFC_PIN_CFG_NO_GPIO (1 << 31)
|
|
|
|
struct sh_pfc_pin {
|
|
u16 pin;
|
|
u16 enum_id;
|
|
const char *name;
|
|
unsigned int configs;
|
|
};
|
|
|
|
#define SH_PFC_PIN_GROUP(n) \
|
|
{ \
|
|
.name = #n, \
|
|
.pins = n##_pins, \
|
|
.mux = n##_mux, \
|
|
.nr_pins = ARRAY_SIZE(n##_pins), \
|
|
}
|
|
|
|
struct sh_pfc_pin_group {
|
|
const char *name;
|
|
const unsigned int *pins;
|
|
const unsigned int *mux;
|
|
unsigned int nr_pins;
|
|
};
|
|
|
|
#define SH_PFC_FUNCTION(n) \
|
|
{ \
|
|
.name = #n, \
|
|
.groups = n##_groups, \
|
|
.nr_groups = ARRAY_SIZE(n##_groups), \
|
|
}
|
|
|
|
struct sh_pfc_function {
|
|
const char *name;
|
|
const char * const *groups;
|
|
unsigned int nr_groups;
|
|
};
|
|
|
|
struct pinmux_func {
|
|
u16 enum_id;
|
|
const char *name;
|
|
};
|
|
|
|
struct pinmux_cfg_reg {
|
|
u32 reg;
|
|
u8 reg_width, field_width;
|
|
const u16 *enum_ids;
|
|
const u8 *var_field_width;
|
|
};
|
|
|
|
#define PINMUX_CFG_REG(name, r, r_width, f_width) \
|
|
.reg = r, .reg_width = r_width, .field_width = f_width, \
|
|
.enum_ids = (const u16 [(r_width / f_width) * (1 << f_width)])
|
|
|
|
#define PINMUX_CFG_REG_VAR(name, r, r_width, var_fw0, var_fwn...) \
|
|
.reg = r, .reg_width = r_width, \
|
|
.var_field_width = (const u8 [r_width]) \
|
|
{ var_fw0, var_fwn, 0 }, \
|
|
.enum_ids = (const u16 [])
|
|
|
|
struct pinmux_data_reg {
|
|
u32 reg;
|
|
u8 reg_width;
|
|
const u16 *enum_ids;
|
|
};
|
|
|
|
#define PINMUX_DATA_REG(name, r, r_width) \
|
|
.reg = r, .reg_width = r_width, \
|
|
.enum_ids = (const u16 [r_width]) \
|
|
|
|
struct pinmux_irq {
|
|
int irq;
|
|
const short *gpios;
|
|
};
|
|
|
|
#ifdef CONFIG_ARCH_MULTIPLATFORM
|
|
#define PINMUX_IRQ(irq_nr, ids...) \
|
|
{ .gpios = (const short []) { ids, -1 } }
|
|
#else
|
|
#define PINMUX_IRQ(irq_nr, ids...) \
|
|
{ .irq = irq_nr, .gpios = (const short []) { ids, -1 } }
|
|
#endif
|
|
|
|
struct pinmux_range {
|
|
u16 begin;
|
|
u16 end;
|
|
u16 force;
|
|
};
|
|
|
|
struct sh_pfc;
|
|
|
|
struct sh_pfc_soc_operations {
|
|
int (*init)(struct sh_pfc *pfc);
|
|
unsigned int (*get_bias)(struct sh_pfc *pfc, unsigned int pin);
|
|
void (*set_bias)(struct sh_pfc *pfc, unsigned int pin,
|
|
unsigned int bias);
|
|
int (*get_io_voltage)(struct sh_pfc *pfc, unsigned int pin);
|
|
int (*set_io_voltage)(struct sh_pfc *pfc, unsigned int pin,
|
|
u16 voltage_mV);
|
|
};
|
|
|
|
struct sh_pfc_soc_info {
|
|
const char *name;
|
|
const struct sh_pfc_soc_operations *ops;
|
|
|
|
struct pinmux_range input;
|
|
struct pinmux_range output;
|
|
struct pinmux_range function;
|
|
|
|
const struct sh_pfc_pin *pins;
|
|
unsigned int nr_pins;
|
|
const struct sh_pfc_pin_group *groups;
|
|
unsigned int nr_groups;
|
|
const struct sh_pfc_function *functions;
|
|
unsigned int nr_functions;
|
|
|
|
const struct pinmux_func *func_gpios;
|
|
unsigned int nr_func_gpios;
|
|
|
|
const struct pinmux_cfg_reg *cfg_regs;
|
|
const struct pinmux_data_reg *data_regs;
|
|
|
|
const u16 *gpio_data;
|
|
unsigned int gpio_data_size;
|
|
|
|
const struct pinmux_irq *gpio_irq;
|
|
unsigned int gpio_irq_size;
|
|
|
|
u32 unlock_reg;
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Helper macros to create pin and port lists
|
|
*/
|
|
|
|
/*
|
|
* sh_pfc_soc_info gpio_data array macros
|
|
*/
|
|
|
|
#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0
|
|
|
|
#define PINMUX_IPSR_NOGP(ispr, fn) \
|
|
PINMUX_DATA(fn##_MARK, FN_##fn)
|
|
#define PINMUX_IPSR_DATA(ipsr, fn) \
|
|
PINMUX_DATA(fn##_MARK, FN_##fn, FN_##ipsr)
|
|
#define PINMUX_IPSR_NOGM(ispr, fn, ms) \
|
|
PINMUX_DATA(fn##_MARK, FN_##fn, FN_##ms)
|
|
#define PINMUX_IPSR_NOFN(ipsr, fn, ms) \
|
|
PINMUX_DATA(fn##_MARK, FN_##ipsr, FN_##ms)
|
|
#define PINMUX_IPSR_MSEL(ipsr, fn, ms) \
|
|
PINMUX_DATA(fn##_MARK, FN_##fn, FN_##ipsr, FN_##ms)
|
|
#define PINMUX_IPSR_MODSEL_DATA(ipsr, fn, ms) \
|
|
PINMUX_DATA(fn##_MARK, FN_##ms, FN_##ipsr, FN_##fn)
|
|
|
|
/*
|
|
* GP port style (32 ports banks)
|
|
*/
|
|
|
|
#define PORT_GP_1(bank, pin, fn, sfx) fn(bank, pin, GP_##bank##_##pin, sfx)
|
|
|
|
#define PORT_GP_32(bank, fn, sfx) \
|
|
PORT_GP_1(bank, 0, fn, sfx), PORT_GP_1(bank, 1, fn, sfx), \
|
|
PORT_GP_1(bank, 2, fn, sfx), PORT_GP_1(bank, 3, fn, sfx), \
|
|
PORT_GP_1(bank, 4, fn, sfx), PORT_GP_1(bank, 5, fn, sfx), \
|
|
PORT_GP_1(bank, 6, fn, sfx), PORT_GP_1(bank, 7, fn, sfx), \
|
|
PORT_GP_1(bank, 8, fn, sfx), PORT_GP_1(bank, 9, fn, sfx), \
|
|
PORT_GP_1(bank, 10, fn, sfx), PORT_GP_1(bank, 11, fn, sfx), \
|
|
PORT_GP_1(bank, 12, fn, sfx), PORT_GP_1(bank, 13, fn, sfx), \
|
|
PORT_GP_1(bank, 14, fn, sfx), PORT_GP_1(bank, 15, fn, sfx), \
|
|
PORT_GP_1(bank, 16, fn, sfx), PORT_GP_1(bank, 17, fn, sfx), \
|
|
PORT_GP_1(bank, 18, fn, sfx), PORT_GP_1(bank, 19, fn, sfx), \
|
|
PORT_GP_1(bank, 20, fn, sfx), PORT_GP_1(bank, 21, fn, sfx), \
|
|
PORT_GP_1(bank, 22, fn, sfx), PORT_GP_1(bank, 23, fn, sfx), \
|
|
PORT_GP_1(bank, 24, fn, sfx), PORT_GP_1(bank, 25, fn, sfx), \
|
|
PORT_GP_1(bank, 26, fn, sfx), PORT_GP_1(bank, 27, fn, sfx), \
|
|
PORT_GP_1(bank, 28, fn, sfx), PORT_GP_1(bank, 29, fn, sfx), \
|
|
PORT_GP_1(bank, 30, fn, sfx), PORT_GP_1(bank, 31, fn, sfx)
|
|
|
|
#define PORT_GP_32_REV(bank, fn, sfx) \
|
|
PORT_GP_1(bank, 31, fn, sfx), PORT_GP_1(bank, 30, fn, sfx), \
|
|
PORT_GP_1(bank, 29, fn, sfx), PORT_GP_1(bank, 28, fn, sfx), \
|
|
PORT_GP_1(bank, 27, fn, sfx), PORT_GP_1(bank, 26, fn, sfx), \
|
|
PORT_GP_1(bank, 25, fn, sfx), PORT_GP_1(bank, 24, fn, sfx), \
|
|
PORT_GP_1(bank, 23, fn, sfx), PORT_GP_1(bank, 22, fn, sfx), \
|
|
PORT_GP_1(bank, 21, fn, sfx), PORT_GP_1(bank, 20, fn, sfx), \
|
|
PORT_GP_1(bank, 19, fn, sfx), PORT_GP_1(bank, 18, fn, sfx), \
|
|
PORT_GP_1(bank, 17, fn, sfx), PORT_GP_1(bank, 16, fn, sfx), \
|
|
PORT_GP_1(bank, 15, fn, sfx), PORT_GP_1(bank, 14, fn, sfx), \
|
|
PORT_GP_1(bank, 13, fn, sfx), PORT_GP_1(bank, 12, fn, sfx), \
|
|
PORT_GP_1(bank, 11, fn, sfx), PORT_GP_1(bank, 10, fn, sfx), \
|
|
PORT_GP_1(bank, 9, fn, sfx), PORT_GP_1(bank, 8, fn, sfx), \
|
|
PORT_GP_1(bank, 7, fn, sfx), PORT_GP_1(bank, 6, fn, sfx), \
|
|
PORT_GP_1(bank, 5, fn, sfx), PORT_GP_1(bank, 4, fn, sfx), \
|
|
PORT_GP_1(bank, 3, fn, sfx), PORT_GP_1(bank, 2, fn, sfx), \
|
|
PORT_GP_1(bank, 1, fn, sfx), PORT_GP_1(bank, 0, fn, sfx)
|
|
|
|
/* GP_ALL(suffix) - Expand to a list of GP_#_#_suffix */
|
|
#define _GP_ALL(bank, pin, name, sfx) name##_##sfx
|
|
#define GP_ALL(str) CPU_ALL_PORT(_GP_ALL, str)
|
|
|
|
/* PINMUX_GPIO_GP_ALL - Expand to a list of sh_pfc_pin entries */
|
|
#define _GP_GPIO(bank, _pin, _name, sfx) \
|
|
{ \
|
|
.pin = (bank * 32) + _pin, \
|
|
.name = __stringify(_name), \
|
|
.enum_id = _name##_DATA, \
|
|
}
|
|
#define PINMUX_GPIO_GP_ALL() CPU_ALL_PORT(_GP_GPIO, unused)
|
|
|
|
/* PINMUX_DATA_GP_ALL - Expand to a list of name_DATA, name_FN marks */
|
|
#define _GP_DATA(bank, pin, name, sfx) PINMUX_DATA(name##_DATA, name##_FN)
|
|
#define PINMUX_DATA_GP_ALL() CPU_ALL_PORT(_GP_DATA, unused)
|
|
|
|
/*
|
|
* PORT style (linear pin space)
|
|
*/
|
|
|
|
#define PORT_1(pn, fn, pfx, sfx) fn(pn, pfx, sfx)
|
|
|
|
#define PORT_10(pn, fn, pfx, sfx) \
|
|
PORT_1(pn, fn, pfx##0, sfx), PORT_1(pn+1, fn, pfx##1, sfx), \
|
|
PORT_1(pn+2, fn, pfx##2, sfx), PORT_1(pn+3, fn, pfx##3, sfx), \
|
|
PORT_1(pn+4, fn, pfx##4, sfx), PORT_1(pn+5, fn, pfx##5, sfx), \
|
|
PORT_1(pn+6, fn, pfx##6, sfx), PORT_1(pn+7, fn, pfx##7, sfx), \
|
|
PORT_1(pn+8, fn, pfx##8, sfx), PORT_1(pn+9, fn, pfx##9, sfx)
|
|
|
|
#define PORT_90(pn, fn, pfx, sfx) \
|
|
PORT_10(pn+10, fn, pfx##1, sfx), PORT_10(pn+20, fn, pfx##2, sfx), \
|
|
PORT_10(pn+30, fn, pfx##3, sfx), PORT_10(pn+40, fn, pfx##4, sfx), \
|
|
PORT_10(pn+50, fn, pfx##5, sfx), PORT_10(pn+60, fn, pfx##6, sfx), \
|
|
PORT_10(pn+70, fn, pfx##7, sfx), PORT_10(pn+80, fn, pfx##8, sfx), \
|
|
PORT_10(pn+90, fn, pfx##9, sfx)
|
|
|
|
/* PORT_ALL(suffix) - Expand to a list of PORT_#_suffix */
|
|
#define _PORT_ALL(pn, pfx, sfx) pfx##_##sfx
|
|
#define PORT_ALL(str) CPU_ALL_PORT(_PORT_ALL, PORT, str)
|
|
|
|
/* PINMUX_GPIO - Expand to a sh_pfc_pin entry */
|
|
#define PINMUX_GPIO(_pin) \
|
|
[GPIO_##_pin] = { \
|
|
.pin = (u16)-1, \
|
|
.name = __stringify(GPIO_##_pin), \
|
|
.enum_id = _pin##_DATA, \
|
|
}
|
|
|
|
/* SH_PFC_PIN_CFG - Expand to a sh_pfc_pin entry (named PORT#) with config */
|
|
#define SH_PFC_PIN_CFG(_pin, cfgs) \
|
|
{ \
|
|
.pin = _pin, \
|
|
.name = __stringify(PORT##_pin), \
|
|
.enum_id = PORT##_pin##_DATA, \
|
|
.configs = cfgs, \
|
|
}
|
|
|
|
/* SH_PFC_PIN_NAMED - Expand to a sh_pfc_pin entry with the given name */
|
|
#define SH_PFC_PIN_NAMED(row, col, _name) \
|
|
{ \
|
|
.pin = PIN_NUMBER(row, col), \
|
|
.name = __stringify(PIN_##_name), \
|
|
.configs = SH_PFC_PIN_CFG_NO_GPIO, \
|
|
}
|
|
|
|
/* PINMUX_DATA_ALL - Expand to a list of PORT_name_DATA, PORT_name_FN0,
|
|
* PORT_name_OUT, PORT_name_IN marks
|
|
*/
|
|
#define _PORT_DATA(pn, pfx, sfx) \
|
|
PINMUX_DATA(PORT##pfx##_DATA, PORT##pfx##_FN0, \
|
|
PORT##pfx##_OUT, PORT##pfx##_IN)
|
|
#define PINMUX_DATA_ALL() CPU_ALL_PORT(_PORT_DATA, , unused)
|
|
|
|
/* GPIO_FN(name) - Expand to a sh_pfc_pin entry for a function GPIO */
|
|
#define PINMUX_GPIO_FN(gpio, base, data_or_mark) \
|
|
[gpio - (base)] = { \
|
|
.name = __stringify(gpio), \
|
|
.enum_id = data_or_mark, \
|
|
}
|
|
#define GPIO_FN(str) \
|
|
PINMUX_GPIO_FN(GPIO_FN_##str, PINMUX_FN_BASE, str##_MARK)
|
|
|
|
/*
|
|
* PORTnCR macro
|
|
*/
|
|
#define PORTCR(nr, reg) \
|
|
{ \
|
|
PINMUX_CFG_REG_VAR("PORT" nr "CR", reg, 8, 2, 2, 1, 3) {\
|
|
/* PULMD[1:0], handled by .set_bias() */ \
|
|
0, 0, 0, 0, \
|
|
/* IE and OE */ \
|
|
0, PORT##nr##_OUT, PORT##nr##_IN, 0, \
|
|
/* SEC, not supported */ \
|
|
0, 0, \
|
|
/* PTMD[2:0] */ \
|
|
PORT##nr##_FN0, PORT##nr##_FN1, \
|
|
PORT##nr##_FN2, PORT##nr##_FN3, \
|
|
PORT##nr##_FN4, PORT##nr##_FN5, \
|
|
PORT##nr##_FN6, PORT##nr##_FN7 \
|
|
} \
|
|
}
|
|
|
|
#endif /* __SH_PFC_H */
|