linux/drivers/char/tpm/tpm_tis_core.c
Hao Wu 79ca6f74da tpm: fix Atmel TPM crash caused by too frequent queries
The Atmel TPM 1.2 chips crash with error
`tpm_try_transmit: send(): error -62` since kernel 4.14.
It is observed from the kernel log after running `tpm_sealdata -z`.
The error thrown from the command is as follows
```
$ tpm_sealdata -z
Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl,
code=0087 (135), I/O error
```

The issue was reproduced with the following Atmel TPM chip:
```
$ tpm_version
T0  TPM 1.2 Version Info:
  Chip Version:        1.2.66.1
  Spec Level:          2
  Errata Revision:     3
  TPM Vendor ID:       ATML
  TPM Version:         01010000
  Manufacturer Info:   41544d4c
```

The root cause of the issue is due to the TPM calls to msleep()
were replaced with usleep_range() [1], which reduces
the actual timeout. Via experiments, it is observed that
the original msleep(5) actually sleeps for 15ms.
Because of a known timeout issue in Atmel TPM 1.2 chip,
the shorter timeout than 15ms can cause the error described above.

A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further
reduced the timeout to less than 1ms. With experiments,
the problematic timeout in the latest kernel is the one
for `wait_for_tpm_stat`.

To fix it, the patch reverts the timeout of `wait_for_tpm_stat`
to 15ms for all Atmel TPM 1.2 chips, but leave it untouched
for Ateml TPM 2.0 chip, and chips from other vendors.
As explained above, the chosen 15ms timeout is
the actual timeout before this issue introduced,
thus the old value is used here.
Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us,
TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to
the existing TPM_TIMEOUT_RANGE_US (300us).
The fixed has been tested in the system with the affected Atmel chip
with no issues observed after boot up.

References:
[1] 9f3fc7bcdd tpm: replace msleep() with usleep_range() in TPM
1.2/2.0 generic drivers
[2] cf151a9a44 tpm: reduce tpm polling delay in tpm_tis_core
[3] 59f5a6b07f tpm: reduce poll sleep time in tpm_transmit()
[4] 424eaf910c tpm: reduce polling time to usecs for even finer
granularity

Fixes: 9f3fc7bcdd ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers")
Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/
Signed-off-by: Hao Wu <hao.wu@rubrik.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-10-26 05:03:34 +03:00

1172 lines
28 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2005, 2006 IBM Corporation
* Copyright (C) 2014, 2015 Intel Corporation
*
* Authors:
* Leendert van Doorn <leendert@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
*
* This device driver implements the TPM interface as defined in
* the TCG TPM Interface Spec version 1.2, revision 1.0.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pnp.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/acpi.h>
#include <linux/freezer.h>
#include "tpm.h"
#include "tpm_tis_core.h"
static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value);
static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
bool check_cancel, bool *canceled)
{
u8 status = chip->ops->status(chip);
*canceled = false;
if ((status & mask) == mask)
return true;
if (check_cancel && chip->ops->req_canceled(chip, status)) {
*canceled = true;
return true;
}
return false;
}
static int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
unsigned long timeout, wait_queue_head_t *queue,
bool check_cancel)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
unsigned long stop;
long rc;
u8 status;
bool canceled = false;
/* check current status */
status = chip->ops->status(chip);
if ((status & mask) == mask)
return 0;
stop = jiffies + timeout;
if (chip->flags & TPM_CHIP_FLAG_IRQ) {
again:
timeout = stop - jiffies;
if ((long)timeout <= 0)
return -ETIME;
rc = wait_event_interruptible_timeout(*queue,
wait_for_tpm_stat_cond(chip, mask, check_cancel,
&canceled),
timeout);
if (rc > 0) {
if (canceled)
return -ECANCELED;
return 0;
}
if (rc == -ERESTARTSYS && freezing(current)) {
clear_thread_flag(TIF_SIGPENDING);
goto again;
}
} else {
do {
usleep_range(priv->timeout_min,
priv->timeout_max);
status = chip->ops->status(chip);
if ((status & mask) == mask)
return 0;
} while (time_before(jiffies, stop));
}
return -ETIME;
}
/* Before we attempt to access the TPM we must see that the valid bit is set.
* The specification says that this bit is 0 at reset and remains 0 until the
* 'TPM has gone through its self test and initialization and has established
* correct values in the other bits.'
*/
static int wait_startup(struct tpm_chip *chip, int l)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
unsigned long stop = jiffies + chip->timeout_a;
do {
int rc;
u8 access;
rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access);
if (rc < 0)
return rc;
if (access & TPM_ACCESS_VALID)
return 0;
tpm_msleep(TPM_TIMEOUT);
} while (time_before(jiffies, stop));
return -1;
}
static bool check_locality(struct tpm_chip *chip, int l)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int rc;
u8 access;
rc = tpm_tis_read8(priv, TPM_ACCESS(l), &access);
if (rc < 0)
return false;
if ((access & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID
| TPM_ACCESS_REQUEST_USE)) ==
(TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) {
priv->locality = l;
return true;
}
return false;
}
static int release_locality(struct tpm_chip *chip, int l)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
tpm_tis_write8(priv, TPM_ACCESS(l), TPM_ACCESS_ACTIVE_LOCALITY);
return 0;
}
static int request_locality(struct tpm_chip *chip, int l)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
unsigned long stop, timeout;
long rc;
if (check_locality(chip, l))
return l;
rc = tpm_tis_write8(priv, TPM_ACCESS(l), TPM_ACCESS_REQUEST_USE);
if (rc < 0)
return rc;
stop = jiffies + chip->timeout_a;
if (chip->flags & TPM_CHIP_FLAG_IRQ) {
again:
timeout = stop - jiffies;
if ((long)timeout <= 0)
return -1;
rc = wait_event_interruptible_timeout(priv->int_queue,
(check_locality
(chip, l)),
timeout);
if (rc > 0)
return l;
if (rc == -ERESTARTSYS && freezing(current)) {
clear_thread_flag(TIF_SIGPENDING);
goto again;
}
} else {
/* wait for burstcount */
do {
if (check_locality(chip, l))
return l;
tpm_msleep(TPM_TIMEOUT);
} while (time_before(jiffies, stop));
}
return -1;
}
static u8 tpm_tis_status(struct tpm_chip *chip)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int rc;
u8 status;
rc = tpm_tis_read8(priv, TPM_STS(priv->locality), &status);
if (rc < 0)
return 0;
if (unlikely((status & TPM_STS_READ_ZERO) != 0)) {
if (!test_and_set_bit(TPM_TIS_INVALID_STATUS, &priv->flags)) {
/*
* If this trips, the chances are the read is
* returning 0xff because the locality hasn't been
* acquired. Usually because tpm_try_get_ops() hasn't
* been called before doing a TPM operation.
*/
dev_err(&chip->dev, "invalid TPM_STS.x 0x%02x, dumping stack for forensics\n",
status);
/*
* Dump stack for forensics, as invalid TPM_STS.x could be
* potentially triggered by impaired tpm_try_get_ops() or
* tpm_find_get_ops().
*/
dump_stack();
}
return 0;
}
return status;
}
static void tpm_tis_ready(struct tpm_chip *chip)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
/* this causes the current command to be aborted */
tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_COMMAND_READY);
}
static int get_burstcount(struct tpm_chip *chip)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
unsigned long stop;
int burstcnt, rc;
u32 value;
/* wait for burstcount */
if (chip->flags & TPM_CHIP_FLAG_TPM2)
stop = jiffies + chip->timeout_a;
else
stop = jiffies + chip->timeout_d;
do {
rc = tpm_tis_read32(priv, TPM_STS(priv->locality), &value);
if (rc < 0)
return rc;
burstcnt = (value >> 8) & 0xFFFF;
if (burstcnt)
return burstcnt;
usleep_range(TPM_TIMEOUT_USECS_MIN, TPM_TIMEOUT_USECS_MAX);
} while (time_before(jiffies, stop));
return -EBUSY;
}
static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int size = 0, burstcnt, rc;
while (size < count) {
rc = wait_for_tpm_stat(chip,
TPM_STS_DATA_AVAIL | TPM_STS_VALID,
chip->timeout_c,
&priv->read_queue, true);
if (rc < 0)
return rc;
burstcnt = get_burstcount(chip);
if (burstcnt < 0) {
dev_err(&chip->dev, "Unable to read burstcount\n");
return burstcnt;
}
burstcnt = min_t(int, burstcnt, count - size);
rc = tpm_tis_read_bytes(priv, TPM_DATA_FIFO(priv->locality),
burstcnt, buf + size);
if (rc < 0)
return rc;
size += burstcnt;
}
return size;
}
static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int size = 0;
int status;
u32 expected;
if (count < TPM_HEADER_SIZE) {
size = -EIO;
goto out;
}
size = recv_data(chip, buf, TPM_HEADER_SIZE);
/* read first 10 bytes, including tag, paramsize, and result */
if (size < TPM_HEADER_SIZE) {
dev_err(&chip->dev, "Unable to read header\n");
goto out;
}
expected = be32_to_cpu(*(__be32 *) (buf + 2));
if (expected > count || expected < TPM_HEADER_SIZE) {
size = -EIO;
goto out;
}
size += recv_data(chip, &buf[TPM_HEADER_SIZE],
expected - TPM_HEADER_SIZE);
if (size < expected) {
dev_err(&chip->dev, "Unable to read remainder of result\n");
size = -ETIME;
goto out;
}
if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
&priv->int_queue, false) < 0) {
size = -ETIME;
goto out;
}
status = tpm_tis_status(chip);
if (status & TPM_STS_DATA_AVAIL) { /* retry? */
dev_err(&chip->dev, "Error left over data\n");
size = -EIO;
goto out;
}
out:
tpm_tis_ready(chip);
return size;
}
/*
* If interrupts are used (signaled by an irq set in the vendor structure)
* tpm.c can skip polling for the data to be available as the interrupt is
* waited for here
*/
static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int rc, status, burstcnt;
size_t count = 0;
bool itpm = priv->flags & TPM_TIS_ITPM_WORKAROUND;
status = tpm_tis_status(chip);
if ((status & TPM_STS_COMMAND_READY) == 0) {
tpm_tis_ready(chip);
if (wait_for_tpm_stat
(chip, TPM_STS_COMMAND_READY, chip->timeout_b,
&priv->int_queue, false) < 0) {
rc = -ETIME;
goto out_err;
}
}
while (count < len - 1) {
burstcnt = get_burstcount(chip);
if (burstcnt < 0) {
dev_err(&chip->dev, "Unable to read burstcount\n");
rc = burstcnt;
goto out_err;
}
burstcnt = min_t(int, burstcnt, len - count - 1);
rc = tpm_tis_write_bytes(priv, TPM_DATA_FIFO(priv->locality),
burstcnt, buf + count);
if (rc < 0)
goto out_err;
count += burstcnt;
if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
&priv->int_queue, false) < 0) {
rc = -ETIME;
goto out_err;
}
status = tpm_tis_status(chip);
if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
rc = -EIO;
goto out_err;
}
}
/* write last byte */
rc = tpm_tis_write8(priv, TPM_DATA_FIFO(priv->locality), buf[count]);
if (rc < 0)
goto out_err;
if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
&priv->int_queue, false) < 0) {
rc = -ETIME;
goto out_err;
}
status = tpm_tis_status(chip);
if (!itpm && (status & TPM_STS_DATA_EXPECT) != 0) {
rc = -EIO;
goto out_err;
}
return 0;
out_err:
tpm_tis_ready(chip);
return rc;
}
static void disable_interrupts(struct tpm_chip *chip)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
u32 intmask;
int rc;
if (priv->irq == 0)
return;
rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
if (rc < 0)
intmask = 0;
intmask &= ~TPM_GLOBAL_INT_ENABLE;
rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
devm_free_irq(chip->dev.parent, priv->irq, chip);
priv->irq = 0;
chip->flags &= ~TPM_CHIP_FLAG_IRQ;
}
/*
* If interrupts are used (signaled by an irq set in the vendor structure)
* tpm.c can skip polling for the data to be available as the interrupt is
* waited for here
*/
static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int rc;
u32 ordinal;
unsigned long dur;
rc = tpm_tis_send_data(chip, buf, len);
if (rc < 0)
return rc;
/* go and do it */
rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
if (rc < 0)
goto out_err;
if (chip->flags & TPM_CHIP_FLAG_IRQ) {
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
dur = tpm_calc_ordinal_duration(chip, ordinal);
if (wait_for_tpm_stat
(chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
&priv->read_queue, false) < 0) {
rc = -ETIME;
goto out_err;
}
}
return 0;
out_err:
tpm_tis_ready(chip);
return rc;
}
static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
{
int rc, irq;
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
if (!(chip->flags & TPM_CHIP_FLAG_IRQ) || priv->irq_tested)
return tpm_tis_send_main(chip, buf, len);
/* Verify receipt of the expected IRQ */
irq = priv->irq;
priv->irq = 0;
chip->flags &= ~TPM_CHIP_FLAG_IRQ;
rc = tpm_tis_send_main(chip, buf, len);
priv->irq = irq;
chip->flags |= TPM_CHIP_FLAG_IRQ;
if (!priv->irq_tested)
tpm_msleep(1);
if (!priv->irq_tested)
disable_interrupts(chip);
priv->irq_tested = true;
return rc;
}
struct tis_vendor_durations_override {
u32 did_vid;
struct tpm1_version version;
unsigned long durations[3];
};
static const struct tis_vendor_durations_override vendor_dur_overrides[] = {
/* STMicroelectronics 0x104a */
{ 0x0000104a,
{ 1, 2, 8, 28 },
{ (2 * 60 * HZ), (2 * 60 * HZ), (2 * 60 * HZ) } },
};
static void tpm_tis_update_durations(struct tpm_chip *chip,
unsigned long *duration_cap)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
struct tpm1_version *version;
u32 did_vid;
int i, rc;
cap_t cap;
chip->duration_adjusted = false;
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, true);
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &did_vid);
if (rc < 0) {
dev_warn(&chip->dev, "%s: failed to read did_vid. %d\n",
__func__, rc);
goto out;
}
/* Try to get a TPM version 1.2 or 1.1 TPM_CAP_VERSION_INFO */
rc = tpm1_getcap(chip, TPM_CAP_VERSION_1_2, &cap,
"attempting to determine the 1.2 version",
sizeof(cap.version2));
if (!rc) {
version = &cap.version2.version;
} else {
rc = tpm1_getcap(chip, TPM_CAP_VERSION_1_1, &cap,
"attempting to determine the 1.1 version",
sizeof(cap.version1));
if (rc)
goto out;
version = &cap.version1;
}
for (i = 0; i != ARRAY_SIZE(vendor_dur_overrides); i++) {
if (vendor_dur_overrides[i].did_vid != did_vid)
continue;
if ((version->major ==
vendor_dur_overrides[i].version.major) &&
(version->minor ==
vendor_dur_overrides[i].version.minor) &&
(version->rev_major ==
vendor_dur_overrides[i].version.rev_major) &&
(version->rev_minor ==
vendor_dur_overrides[i].version.rev_minor)) {
memcpy(duration_cap,
vendor_dur_overrides[i].durations,
sizeof(vendor_dur_overrides[i].durations));
chip->duration_adjusted = true;
goto out;
}
}
out:
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, false);
}
struct tis_vendor_timeout_override {
u32 did_vid;
unsigned long timeout_us[4];
};
static const struct tis_vendor_timeout_override vendor_timeout_overrides[] = {
/* Atmel 3204 */
{ 0x32041114, { (TIS_SHORT_TIMEOUT*1000), (TIS_LONG_TIMEOUT*1000),
(TIS_SHORT_TIMEOUT*1000), (TIS_SHORT_TIMEOUT*1000) } },
};
static void tpm_tis_update_timeouts(struct tpm_chip *chip,
unsigned long *timeout_cap)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int i, rc;
u32 did_vid;
chip->timeout_adjusted = false;
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, true);
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &did_vid);
if (rc < 0) {
dev_warn(&chip->dev, "%s: failed to read did_vid: %d\n",
__func__, rc);
goto out;
}
for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
if (vendor_timeout_overrides[i].did_vid != did_vid)
continue;
memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
sizeof(vendor_timeout_overrides[i].timeout_us));
chip->timeout_adjusted = true;
}
out:
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, false);
return;
}
/*
* Early probing for iTPM with STS_DATA_EXPECT flaw.
* Try sending command without itpm flag set and if that
* fails, repeat with itpm flag set.
*/
static int probe_itpm(struct tpm_chip *chip)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int rc = 0;
static const u8 cmd_getticks[] = {
0x00, 0xc1, 0x00, 0x00, 0x00, 0x0a,
0x00, 0x00, 0x00, 0xf1
};
size_t len = sizeof(cmd_getticks);
u16 vendor;
if (priv->flags & TPM_TIS_ITPM_WORKAROUND)
return 0;
rc = tpm_tis_read16(priv, TPM_DID_VID(0), &vendor);
if (rc < 0)
return rc;
/* probe only iTPMS */
if (vendor != TPM_VID_INTEL)
return 0;
if (request_locality(chip, 0) != 0)
return -EBUSY;
rc = tpm_tis_send_data(chip, cmd_getticks, len);
if (rc == 0)
goto out;
tpm_tis_ready(chip);
priv->flags |= TPM_TIS_ITPM_WORKAROUND;
rc = tpm_tis_send_data(chip, cmd_getticks, len);
if (rc == 0)
dev_info(&chip->dev, "Detected an iTPM.\n");
else {
priv->flags &= ~TPM_TIS_ITPM_WORKAROUND;
rc = -EFAULT;
}
out:
tpm_tis_ready(chip);
release_locality(chip, priv->locality);
return rc;
}
static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
switch (priv->manufacturer_id) {
case TPM_VID_WINBOND:
return ((status == TPM_STS_VALID) ||
(status == (TPM_STS_VALID | TPM_STS_COMMAND_READY)));
case TPM_VID_STM:
return (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY));
default:
return (status == TPM_STS_COMMAND_READY);
}
}
static irqreturn_t tis_int_handler(int dummy, void *dev_id)
{
struct tpm_chip *chip = dev_id;
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
u32 interrupt;
int i, rc;
rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
if (rc < 0)
return IRQ_NONE;
if (interrupt == 0)
return IRQ_NONE;
priv->irq_tested = true;
if (interrupt & TPM_INTF_DATA_AVAIL_INT)
wake_up_interruptible(&priv->read_queue);
if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
for (i = 0; i < 5; i++)
if (check_locality(chip, i))
break;
if (interrupt &
(TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
TPM_INTF_CMD_READY_INT))
wake_up_interruptible(&priv->int_queue);
/* Clear interrupts handled with TPM_EOI */
rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
if (rc < 0)
return IRQ_NONE;
tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
return IRQ_HANDLED;
}
static int tpm_tis_gen_interrupt(struct tpm_chip *chip)
{
const char *desc = "attempting to generate an interrupt";
u32 cap2;
cap_t cap;
int ret;
ret = request_locality(chip, 0);
if (ret < 0)
return ret;
if (chip->flags & TPM_CHIP_FLAG_TPM2)
ret = tpm2_get_tpm_pt(chip, 0x100, &cap2, desc);
else
ret = tpm1_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc, 0);
release_locality(chip, 0);
return ret;
}
/* Register the IRQ and issue a command that will cause an interrupt. If an
* irq is seen then leave the chip setup for IRQ operation, otherwise reverse
* everything and leave in polling mode. Returns 0 on success.
*/
static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
int flags, int irq)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
u8 original_int_vec;
int rc;
u32 int_status;
if (devm_request_irq(chip->dev.parent, irq, tis_int_handler, flags,
dev_name(&chip->dev), chip) != 0) {
dev_info(&chip->dev, "Unable to request irq: %d for probe\n",
irq);
return -1;
}
priv->irq = irq;
rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality),
&original_int_vec);
if (rc < 0)
return rc;
rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), irq);
if (rc < 0)
return rc;
rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &int_status);
if (rc < 0)
return rc;
/* Clear all existing */
rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), int_status);
if (rc < 0)
return rc;
/* Turn on */
rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality),
intmask | TPM_GLOBAL_INT_ENABLE);
if (rc < 0)
return rc;
priv->irq_tested = false;
/* Generate an interrupt by having the core call through to
* tpm_tis_send
*/
rc = tpm_tis_gen_interrupt(chip);
if (rc < 0)
return rc;
/* tpm_tis_send will either confirm the interrupt is working or it
* will call disable_irq which undoes all of the above.
*/
if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
rc = tpm_tis_write8(priv, original_int_vec,
TPM_INT_VECTOR(priv->locality));
if (rc < 0)
return rc;
return 1;
}
return 0;
}
/* Try to find the IRQ the TPM is using. This is for legacy x86 systems that
* do not have ACPI/etc. We typically expect the interrupt to be declared if
* present.
*/
static void tpm_tis_probe_irq(struct tpm_chip *chip, u32 intmask)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
u8 original_int_vec;
int i, rc;
rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality),
&original_int_vec);
if (rc < 0)
return;
if (!original_int_vec) {
if (IS_ENABLED(CONFIG_X86))
for (i = 3; i <= 15; i++)
if (!tpm_tis_probe_irq_single(chip, intmask, 0,
i))
return;
} else if (!tpm_tis_probe_irq_single(chip, intmask, 0,
original_int_vec))
return;
}
void tpm_tis_remove(struct tpm_chip *chip)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
u32 reg = TPM_INT_ENABLE(priv->locality);
u32 interrupt;
int rc;
tpm_tis_clkrun_enable(chip, true);
rc = tpm_tis_read32(priv, reg, &interrupt);
if (rc < 0)
interrupt = 0;
tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
tpm_tis_clkrun_enable(chip, false);
if (priv->ilb_base_addr)
iounmap(priv->ilb_base_addr);
}
EXPORT_SYMBOL_GPL(tpm_tis_remove);
/**
* tpm_tis_clkrun_enable() - Keep clkrun protocol disabled for entire duration
* of a single TPM command
* @chip: TPM chip to use
* @value: 1 - Disable CLKRUN protocol, so that clocks are free running
* 0 - Enable CLKRUN protocol
* Call this function directly in tpm_tis_remove() in error or driver removal
* path, since the chip->ops is set to NULL in tpm_chip_unregister().
*/
static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
{
struct tpm_tis_data *data = dev_get_drvdata(&chip->dev);
u32 clkrun_val;
if (!IS_ENABLED(CONFIG_X86) || !is_bsw() ||
!data->ilb_base_addr)
return;
if (value) {
data->clkrun_enabled++;
if (data->clkrun_enabled > 1)
return;
clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
/* Disable LPC CLKRUN# */
clkrun_val &= ~LPC_CLKRUN_EN;
iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
/*
* Write any random value on port 0x80 which is on LPC, to make
* sure LPC clock is running before sending any TPM command.
*/
outb(0xCC, 0x80);
} else {
data->clkrun_enabled--;
if (data->clkrun_enabled)
return;
clkrun_val = ioread32(data->ilb_base_addr + LPC_CNTRL_OFFSET);
/* Enable LPC CLKRUN# */
clkrun_val |= LPC_CLKRUN_EN;
iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
/*
* Write any random value on port 0x80 which is on LPC, to make
* sure LPC clock is running before sending any TPM command.
*/
outb(0xCC, 0x80);
}
}
static const struct tpm_class_ops tpm_tis = {
.flags = TPM_OPS_AUTO_STARTUP,
.status = tpm_tis_status,
.recv = tpm_tis_recv,
.send = tpm_tis_send,
.cancel = tpm_tis_ready,
.update_timeouts = tpm_tis_update_timeouts,
.update_durations = tpm_tis_update_durations,
.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
.req_canceled = tpm_tis_req_canceled,
.request_locality = request_locality,
.relinquish_locality = release_locality,
.clk_enable = tpm_tis_clkrun_enable,
};
int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
const struct tpm_tis_phy_ops *phy_ops,
acpi_handle acpi_dev_handle)
{
u32 vendor;
u32 intfcaps;
u32 intmask;
u32 clkrun_val;
u8 rid;
int rc, probe;
struct tpm_chip *chip;
chip = tpmm_chip_alloc(dev, &tpm_tis);
if (IS_ERR(chip))
return PTR_ERR(chip);
#ifdef CONFIG_ACPI
chip->acpi_dev_handle = acpi_dev_handle;
#endif
chip->hwrng.quality = priv->rng_quality;
/* Maximum timeouts */
chip->timeout_a = msecs_to_jiffies(TIS_TIMEOUT_A_MAX);
chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX);
chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX);
chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX);
priv->timeout_min = TPM_TIMEOUT_USECS_MIN;
priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
priv->phy_ops = phy_ops;
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
if (rc < 0)
goto out_err;
priv->manufacturer_id = vendor;
if (priv->manufacturer_id == TPM_VID_ATML &&
!(chip->flags & TPM_CHIP_FLAG_TPM2)) {
priv->timeout_min = TIS_TIMEOUT_MIN_ATML;
priv->timeout_max = TIS_TIMEOUT_MAX_ATML;
}
dev_set_drvdata(&chip->dev, priv);
if (is_bsw()) {
priv->ilb_base_addr = ioremap(INTEL_LEGACY_BLK_BASE_ADDR,
ILB_REMAP_SIZE);
if (!priv->ilb_base_addr)
return -ENOMEM;
clkrun_val = ioread32(priv->ilb_base_addr + LPC_CNTRL_OFFSET);
/* Check if CLKRUN# is already not enabled in the LPC bus */
if (!(clkrun_val & LPC_CLKRUN_EN)) {
iounmap(priv->ilb_base_addr);
priv->ilb_base_addr = NULL;
}
}
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, true);
if (wait_startup(chip, 0) != 0) {
rc = -ENODEV;
goto out_err;
}
/* Take control of the TPM's interrupt hardware and shut it off */
rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
if (rc < 0)
goto out_err;
intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
intmask &= ~TPM_GLOBAL_INT_ENABLE;
tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
rc = tpm_chip_start(chip);
if (rc)
goto out_err;
rc = tpm2_probe(chip);
tpm_chip_stop(chip);
if (rc)
goto out_err;
rc = tpm_tis_read8(priv, TPM_RID(0), &rid);
if (rc < 0)
goto out_err;
dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
(chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
vendor >> 16, rid);
probe = probe_itpm(chip);
if (probe < 0) {
rc = -ENODEV;
goto out_err;
}
/* Figure out the capabilities */
rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
if (rc < 0)
goto out_err;
dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
intfcaps);
if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
dev_dbg(dev, "\tBurst Count Static\n");
if (intfcaps & TPM_INTF_CMD_READY_INT)
dev_dbg(dev, "\tCommand Ready Int Support\n");
if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
dev_dbg(dev, "\tInterrupt Edge Falling\n");
if (intfcaps & TPM_INTF_INT_EDGE_RISING)
dev_dbg(dev, "\tInterrupt Edge Rising\n");
if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
dev_dbg(dev, "\tInterrupt Level Low\n");
if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
dev_dbg(dev, "\tInterrupt Level High\n");
if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
dev_dbg(dev, "\tLocality Change Int Support\n");
if (intfcaps & TPM_INTF_STS_VALID_INT)
dev_dbg(dev, "\tSts Valid Int Support\n");
if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
dev_dbg(dev, "\tData Avail Int Support\n");
/* INTERRUPT Setup */
init_waitqueue_head(&priv->read_queue);
init_waitqueue_head(&priv->int_queue);
if (irq != -1) {
/*
* Before doing irq testing issue a command to the TPM in polling mode
* to make sure it works. May as well use that command to set the
* proper timeouts for the driver.
*/
rc = request_locality(chip, 0);
if (rc < 0)
goto out_err;
rc = tpm_get_timeouts(chip);
release_locality(chip, 0);
if (rc) {
dev_err(dev, "Could not get TPM timeouts and durations\n");
rc = -ENODEV;
goto out_err;
}
if (irq) {
tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
irq);
if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
dev_err(&chip->dev, FW_BUG
"TPM interrupt not working, polling instead\n");
disable_interrupts(chip);
}
} else {
tpm_tis_probe_irq(chip, intmask);
}
}
rc = tpm_chip_register(chip);
if (rc)
goto out_err;
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, false);
return 0;
out_err:
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, false);
tpm_tis_remove(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_tis_core_init);
#ifdef CONFIG_PM_SLEEP
static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
u32 intmask;
int rc;
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, true);
/* reenable interrupts that device may have lost or
* BIOS/firmware may have disabled
*/
rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), priv->irq);
if (rc < 0)
goto out;
rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
if (rc < 0)
goto out;
intmask |= TPM_INTF_CMD_READY_INT
| TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
| TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
out:
if (chip->ops->clk_enable != NULL)
chip->ops->clk_enable(chip, false);
return;
}
int tpm_tis_resume(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
int ret;
if (chip->flags & TPM_CHIP_FLAG_IRQ)
tpm_tis_reenable_interrupts(chip);
ret = tpm_pm_resume(dev);
if (ret)
return ret;
/*
* TPM 1.2 requires self-test on resume. This function actually returns
* an error code but for unknown reason it isn't handled.
*/
if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) {
ret = request_locality(chip, 0);
if (ret < 0)
return ret;
tpm1_do_selftest(chip);
release_locality(chip, 0);
}
return 0;
}
EXPORT_SYMBOL_GPL(tpm_tis_resume);
#endif
MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
MODULE_DESCRIPTION("TPM Driver");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");