forked from Minki/linux
916f562fb2
side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1 -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/ tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd O2zWCGffeYs= =mK0C -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
457 lines
30 KiB
C
457 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright 2013-2014 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <dt-bindings/clock/imx6sl-clock.h>
|
|
|
|
#include "clk.h"
|
|
|
|
#define CCSR 0xc
|
|
#define BM_CCSR_PLL1_SW_CLK_SEL (1 << 2)
|
|
#define CACRR 0x10
|
|
#define CDHIPR 0x48
|
|
#define BM_CDHIPR_ARM_PODF_BUSY (1 << 16)
|
|
#define ARM_WAIT_DIV_396M 2
|
|
#define ARM_WAIT_DIV_792M 4
|
|
#define ARM_WAIT_DIV_996M 6
|
|
|
|
#define PLL_ARM 0x0
|
|
#define BM_PLL_ARM_DIV_SELECT (0x7f << 0)
|
|
#define BM_PLL_ARM_POWERDOWN (1 << 12)
|
|
#define BM_PLL_ARM_ENABLE (1 << 13)
|
|
#define BM_PLL_ARM_LOCK (1 << 31)
|
|
#define PLL_ARM_DIV_792M 66
|
|
|
|
static const char *step_sels[] = { "osc", "pll2_pfd2", };
|
|
static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
|
|
static const char *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", };
|
|
static const char *ocram_sels[] = { "periph", "ocram_alt_sels", };
|
|
static const char *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
|
|
static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
|
|
static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
|
|
static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", };
|
|
static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", };
|
|
static const char *csi_sels[] = { "osc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
|
|
static const char *lcdif_axi_sels[] = { "pll2_bus", "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", };
|
|
static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", };
|
|
static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
|
|
static const char *perclk_sels[] = { "ipg", "osc", };
|
|
static const char *pxp_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd3", };
|
|
static const char *epdc_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd2", };
|
|
static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
|
|
static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
|
|
static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
|
|
static const char *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
|
|
static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
|
|
static const char *ecspi_sels[] = { "pll3_60m", "osc", };
|
|
static const char *uart_sels[] = { "pll3_80m", "osc", };
|
|
static const char *lvds_sels[] = {
|
|
"pll1_sys", "pll2_bus", "pll2_pfd0", "pll2_pfd1", "pll2_pfd2", "dummy", "pll4_audio", "pll5_video",
|
|
"dummy", "enet_ref", "dummy", "dummy", "pll3_usb_otg", "pll7_usb_host", "pll3_pfd0", "pll3_pfd1",
|
|
"pll3_pfd2", "pll3_pfd3", "osc", "dummy", "dummy", "dummy", "dummy", "dummy",
|
|
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
|
|
};
|
|
static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", };
|
|
static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
|
|
static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
|
|
static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
|
|
static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
|
|
static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
|
|
static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
|
|
static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
|
|
|
|
static const struct clk_div_table clk_enet_ref_table[] = {
|
|
{ .val = 0, .div = 20, },
|
|
{ .val = 1, .div = 10, },
|
|
{ .val = 2, .div = 5, },
|
|
{ .val = 3, .div = 4, },
|
|
{ }
|
|
};
|
|
|
|
static const struct clk_div_table post_div_table[] = {
|
|
{ .val = 2, .div = 1, },
|
|
{ .val = 1, .div = 2, },
|
|
{ .val = 0, .div = 4, },
|
|
{ }
|
|
};
|
|
|
|
static const struct clk_div_table video_div_table[] = {
|
|
{ .val = 0, .div = 1, },
|
|
{ .val = 1, .div = 2, },
|
|
{ .val = 2, .div = 1, },
|
|
{ .val = 3, .div = 4, },
|
|
{ }
|
|
};
|
|
|
|
static unsigned int share_count_ssi1;
|
|
static unsigned int share_count_ssi2;
|
|
static unsigned int share_count_ssi3;
|
|
static unsigned int share_count_spdif;
|
|
|
|
static struct clk_hw **hws;
|
|
static struct clk_hw_onecell_data *clk_hw_data;
|
|
static void __iomem *ccm_base;
|
|
static void __iomem *anatop_base;
|
|
|
|
/*
|
|
* ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
|
|
* during WAIT mode entry process could cause cache memory
|
|
* corruption.
|
|
*
|
|
* Software workaround:
|
|
* To prevent this issue from occurring, software should ensure that the
|
|
* ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before
|
|
* entering WAIT mode.
|
|
*
|
|
* This function will set the ARM clk to max value within the 12:5 limit.
|
|
* As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz),
|
|
* ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since
|
|
* the clk APIs can NOT be called in idle thread(may cause kernel schedule
|
|
* as there is sleep function in PLL wait function), so here we just slow
|
|
* down ARM to below freq according to previous freq:
|
|
*
|
|
* run mode wait mode
|
|
* 396MHz -> 132MHz;
|
|
* 792MHz -> 158.4MHz;
|
|
* 996MHz -> 142.3MHz;
|
|
*/
|
|
static int imx6sl_get_arm_divider_for_wait(void)
|
|
{
|
|
if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) {
|
|
return ARM_WAIT_DIV_396M;
|
|
} else {
|
|
if ((readl_relaxed(anatop_base + PLL_ARM) &
|
|
BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M)
|
|
return ARM_WAIT_DIV_792M;
|
|
else
|
|
return ARM_WAIT_DIV_996M;
|
|
}
|
|
}
|
|
|
|
static void imx6sl_enable_pll_arm(bool enable)
|
|
{
|
|
static u32 saved_pll_arm;
|
|
u32 val;
|
|
|
|
if (enable) {
|
|
saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM);
|
|
val |= BM_PLL_ARM_ENABLE;
|
|
val &= ~BM_PLL_ARM_POWERDOWN;
|
|
writel_relaxed(val, anatop_base + PLL_ARM);
|
|
while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
|
|
;
|
|
} else {
|
|
writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM);
|
|
}
|
|
}
|
|
|
|
void imx6sl_set_wait_clk(bool enter)
|
|
{
|
|
static unsigned long saved_arm_div;
|
|
int arm_div_for_wait = imx6sl_get_arm_divider_for_wait();
|
|
|
|
/*
|
|
* According to hardware design, arm podf change need
|
|
* PLL1 clock enabled.
|
|
*/
|
|
if (arm_div_for_wait == ARM_WAIT_DIV_396M)
|
|
imx6sl_enable_pll_arm(true);
|
|
|
|
if (enter) {
|
|
saved_arm_div = readl_relaxed(ccm_base + CACRR);
|
|
writel_relaxed(arm_div_for_wait, ccm_base + CACRR);
|
|
} else {
|
|
writel_relaxed(saved_arm_div, ccm_base + CACRR);
|
|
}
|
|
while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY)
|
|
;
|
|
|
|
if (arm_div_for_wait == ARM_WAIT_DIV_396M)
|
|
imx6sl_enable_pll_arm(false);
|
|
}
|
|
|
|
static const int uart_clk_ids[] __initconst = {
|
|
IMX6SL_CLK_UART,
|
|
IMX6SL_CLK_UART_SERIAL,
|
|
};
|
|
|
|
static struct clk **uart_clks[ARRAY_SIZE(uart_clk_ids) + 1] __initdata;
|
|
|
|
static void __init imx6sl_clocks_init(struct device_node *ccm_node)
|
|
{
|
|
struct device_node *np;
|
|
void __iomem *base;
|
|
int ret;
|
|
int i;
|
|
|
|
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
|
|
IMX6SL_CLK_END), GFP_KERNEL);
|
|
if (WARN_ON(!clk_hw_data))
|
|
return;
|
|
|
|
clk_hw_data->num = IMX6SL_CLK_END;
|
|
hws = clk_hw_data->hws;
|
|
|
|
hws[IMX6SL_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0);
|
|
hws[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock_hw("ckil", 0);
|
|
hws[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock_hw("osc", 0);
|
|
/* Clock source from external clock via CLK1 PAD */
|
|
hws[IMX6SL_CLK_ANACLK1] = imx_obtain_fixed_clock_hw("anaclk1", 0);
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
|
|
base = of_iomap(np, 0);
|
|
WARN_ON(!base);
|
|
anatop_base = base;
|
|
|
|
hws[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_hw_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6SL_PLL2_BYPASS_SRC] = imx_clk_hw_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6SL_PLL3_BYPASS_SRC] = imx_clk_hw_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6SL_PLL4_BYPASS_SRC] = imx_clk_hw_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6SL_PLL5_BYPASS_SRC] = imx_clk_hw_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6SL_PLL6_BYPASS_SRC] = imx_clk_hw_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6SL_PLL7_BYPASS_SRC] = imx_clk_hw_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
|
|
/* type name parent_name base div_mask */
|
|
hws[IMX6SL_CLK_PLL1] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1", "osc", base + 0x00, 0x7f);
|
|
hws[IMX6SL_CLK_PLL2] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2", "osc", base + 0x30, 0x1);
|
|
hws[IMX6SL_CLK_PLL3] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3", "osc", base + 0x10, 0x3);
|
|
hws[IMX6SL_CLK_PLL4] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll4", "osc", base + 0x70, 0x7f);
|
|
hws[IMX6SL_CLK_PLL5] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5", "osc", base + 0xa0, 0x7f);
|
|
hws[IMX6SL_CLK_PLL6] = imx_clk_hw_pllv3(IMX_PLLV3_ENET, "pll6", "osc", base + 0xe0, 0x3);
|
|
hws[IMX6SL_CLK_PLL7] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll7", "osc", base + 0x20, 0x3);
|
|
|
|
hws[IMX6SL_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6SL_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6SL_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6SL_PLL4_BYPASS] = imx_clk_hw_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6SL_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6SL_PLL6_BYPASS] = imx_clk_hw_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6SL_PLL7_BYPASS] = imx_clk_hw_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
|
|
|
|
/* Do not bypass PLLs initially */
|
|
clk_set_parent(hws[IMX6SL_PLL1_BYPASS]->clk, hws[IMX6SL_CLK_PLL1]->clk);
|
|
clk_set_parent(hws[IMX6SL_PLL2_BYPASS]->clk, hws[IMX6SL_CLK_PLL2]->clk);
|
|
clk_set_parent(hws[IMX6SL_PLL3_BYPASS]->clk, hws[IMX6SL_CLK_PLL3]->clk);
|
|
clk_set_parent(hws[IMX6SL_PLL4_BYPASS]->clk, hws[IMX6SL_CLK_PLL4]->clk);
|
|
clk_set_parent(hws[IMX6SL_PLL5_BYPASS]->clk, hws[IMX6SL_CLK_PLL5]->clk);
|
|
clk_set_parent(hws[IMX6SL_PLL6_BYPASS]->clk, hws[IMX6SL_CLK_PLL6]->clk);
|
|
clk_set_parent(hws[IMX6SL_PLL7_BYPASS]->clk, hws[IMX6SL_CLK_PLL7]->clk);
|
|
|
|
hws[IMX6SL_CLK_PLL1_SYS] = imx_clk_hw_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
|
|
hws[IMX6SL_CLK_PLL2_BUS] = imx_clk_hw_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
|
|
hws[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_hw_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
|
|
hws[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_hw_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
|
|
hws[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_hw_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
|
|
hws[IMX6SL_CLK_PLL6_ENET] = imx_clk_hw_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
|
|
hws[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_hw_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
|
|
|
|
hws[IMX6SL_CLK_LVDS1_SEL] = imx_clk_hw_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
|
|
hws[IMX6SL_CLK_LVDS1_OUT] = imx_clk_hw_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12));
|
|
hws[IMX6SL_CLK_LVDS1_IN] = imx_clk_hw_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
|
|
|
|
/*
|
|
* usbphy1 and usbphy2 are implemented as dummy gates using reserve
|
|
* bit 20. They are used by phy driver to keep the refcount of
|
|
* parent PLL correct. usbphy1_gate and usbphy2_gate only needs to be
|
|
* turned on during boot, and software will not need to control it
|
|
* anymore after that.
|
|
*/
|
|
hws[IMX6SL_CLK_USBPHY1] = imx_clk_hw_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
|
|
hws[IMX6SL_CLK_USBPHY2] = imx_clk_hw_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
|
|
hws[IMX6SL_CLK_USBPHY1_GATE] = imx_clk_hw_gate("usbphy1_gate", "dummy", base + 0x10, 6);
|
|
hws[IMX6SL_CLK_USBPHY2_GATE] = imx_clk_hw_gate("usbphy2_gate", "dummy", base + 0x20, 6);
|
|
|
|
/* dev name parent_name flags reg shift width div: flags, div_table lock */
|
|
hws[IMX6SL_CLK_PLL4_POST_DIV] = clk_hw_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
|
|
hws[IMX6SL_CLK_PLL4_AUDIO_DIV] = clk_hw_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
|
|
hws[IMX6SL_CLK_PLL5_POST_DIV] = clk_hw_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
|
|
hws[IMX6SL_CLK_PLL5_VIDEO_DIV] = clk_hw_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
|
|
hws[IMX6SL_CLK_ENET_REF] = clk_hw_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
|
|
|
|
/* name parent_name reg idx */
|
|
hws[IMX6SL_CLK_PLL2_PFD0] = imx_clk_hw_pfd("pll2_pfd0", "pll2_bus", base + 0x100, 0);
|
|
hws[IMX6SL_CLK_PLL2_PFD1] = imx_clk_hw_pfd("pll2_pfd1", "pll2_bus", base + 0x100, 1);
|
|
hws[IMX6SL_CLK_PLL2_PFD2] = imx_clk_hw_pfd("pll2_pfd2", "pll2_bus", base + 0x100, 2);
|
|
hws[IMX6SL_CLK_PLL3_PFD0] = imx_clk_hw_pfd("pll3_pfd0", "pll3_usb_otg", base + 0xf0, 0);
|
|
hws[IMX6SL_CLK_PLL3_PFD1] = imx_clk_hw_pfd("pll3_pfd1", "pll3_usb_otg", base + 0xf0, 1);
|
|
hws[IMX6SL_CLK_PLL3_PFD2] = imx_clk_hw_pfd("pll3_pfd2", "pll3_usb_otg", base + 0xf0, 2);
|
|
hws[IMX6SL_CLK_PLL3_PFD3] = imx_clk_hw_pfd("pll3_pfd3", "pll3_usb_otg", base + 0xf0, 3);
|
|
|
|
/* name parent_name mult div */
|
|
hws[IMX6SL_CLK_PLL2_198M] = imx_clk_hw_fixed_factor("pll2_198m", "pll2_pfd2", 1, 2);
|
|
hws[IMX6SL_CLK_PLL3_120M] = imx_clk_hw_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
|
|
hws[IMX6SL_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
|
|
hws[IMX6SL_CLK_PLL3_60M] = imx_clk_hw_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
|
|
|
|
np = ccm_node;
|
|
base = of_iomap(np, 0);
|
|
WARN_ON(!base);
|
|
ccm_base = base;
|
|
|
|
/* name reg shift width parent_names num_parents */
|
|
hws[IMX6SL_CLK_STEP] = imx_clk_hw_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
|
|
hws[IMX6SL_CLK_PLL1_SW] = imx_clk_hw_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
|
|
hws[IMX6SL_CLK_OCRAM_ALT_SEL] = imx_clk_hw_mux("ocram_alt_sel", base + 0x14, 7, 1, ocram_alt_sels, ARRAY_SIZE(ocram_alt_sels));
|
|
hws[IMX6SL_CLK_OCRAM_SEL] = imx_clk_hw_mux("ocram_sel", base + 0x14, 6, 1, ocram_sels, ARRAY_SIZE(ocram_sels));
|
|
hws[IMX6SL_CLK_PRE_PERIPH2_SEL] = imx_clk_hw_mux("pre_periph2_sel", base + 0x18, 21, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
|
|
hws[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
|
|
hws[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_hw_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
|
|
hws[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_hw_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
|
|
hws[IMX6SL_CLK_CSI_SEL] = imx_clk_hw_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
|
|
hws[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_hw_mux("lcdif_axi_sel", base + 0x3c, 14, 2, lcdif_axi_sels, ARRAY_SIZE(lcdif_axi_sels));
|
|
hws[IMX6SL_CLK_USDHC1_SEL] = imx_clk_hw_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_USDHC2_SEL] = imx_clk_hw_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_USDHC3_SEL] = imx_clk_hw_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_USDHC4_SEL] = imx_clk_hw_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_SSI1_SEL] = imx_clk_hw_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_SSI2_SEL] = imx_clk_hw_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_SSI3_SEL] = imx_clk_hw_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_PERCLK_SEL] = imx_clk_hw_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_hw_mux("pxp_axi_sel", base + 0x34, 6, 3, pxp_axi_sels, ARRAY_SIZE(pxp_axi_sels));
|
|
hws[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_hw_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_axi_sels, ARRAY_SIZE(epdc_axi_sels));
|
|
hws[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_hw_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels));
|
|
hws[IMX6SL_CLK_GPU2D_SEL] = imx_clk_hw_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels));
|
|
hws[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_hw_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels));
|
|
hws[IMX6SL_CLK_EPDC_PIX_SEL] = imx_clk_hw_mux("epdc_pix_sel", base + 0x38, 15, 3, epdc_pix_sels, ARRAY_SIZE(epdc_pix_sels));
|
|
hws[IMX6SL_CLK_SPDIF0_SEL] = imx_clk_hw_mux("spdif0_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
|
|
hws[IMX6SL_CLK_SPDIF1_SEL] = imx_clk_hw_mux("spdif1_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
|
|
hws[IMX6SL_CLK_EXTERN_AUDIO_SEL] = imx_clk_hw_mux("extern_audio_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
|
|
hws[IMX6SL_CLK_ECSPI_SEL] = imx_clk_hw_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
|
|
hws[IMX6SL_CLK_UART_SEL] = imx_clk_hw_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
|
|
|
|
/* name reg shift width busy: reg, shift parent_names num_parents */
|
|
hws[IMX6SL_CLK_PERIPH] = imx_clk_hw_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
|
|
hws[IMX6SL_CLK_PERIPH2] = imx_clk_hw_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
|
|
|
|
/* name parent_name reg shift width */
|
|
hws[IMX6SL_CLK_OCRAM_PODF] = imx_clk_hw_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0);
|
|
hws[IMX6SL_CLK_PERIPH_CLK2_PODF] = imx_clk_hw_divider("periph_clk2_podf", "periph_clk2_sel", base + 0x14, 27, 3);
|
|
hws[IMX6SL_CLK_PERIPH2_CLK2_PODF] = imx_clk_hw_divider("periph2_clk2_podf", "periph2_clk2_sel", base + 0x14, 0, 3);
|
|
hws[IMX6SL_CLK_IPG] = imx_clk_hw_divider("ipg", "ahb", base + 0x14, 8, 2);
|
|
hws[IMX6SL_CLK_CSI_PODF] = imx_clk_hw_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
|
|
hws[IMX6SL_CLK_LCDIF_AXI_PODF] = imx_clk_hw_divider("lcdif_axi_podf", "lcdif_axi_sel", base + 0x3c, 16, 3);
|
|
hws[IMX6SL_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
|
|
hws[IMX6SL_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
|
|
hws[IMX6SL_CLK_USDHC3_PODF] = imx_clk_hw_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
|
|
hws[IMX6SL_CLK_USDHC4_PODF] = imx_clk_hw_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
|
|
hws[IMX6SL_CLK_SSI1_PRED] = imx_clk_hw_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
|
|
hws[IMX6SL_CLK_SSI1_PODF] = imx_clk_hw_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
|
|
hws[IMX6SL_CLK_SSI2_PRED] = imx_clk_hw_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
|
|
hws[IMX6SL_CLK_SSI2_PODF] = imx_clk_hw_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
|
|
hws[IMX6SL_CLK_SSI3_PRED] = imx_clk_hw_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
|
|
hws[IMX6SL_CLK_SSI3_PODF] = imx_clk_hw_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
|
|
hws[IMX6SL_CLK_PERCLK] = imx_clk_hw_fixup_divider("perclk", "perclk_sel", base + 0x1c, 0, 6, imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_PXP_AXI_PODF] = imx_clk_hw_divider("pxp_axi_podf", "pxp_axi_sel", base + 0x34, 3, 3);
|
|
hws[IMX6SL_CLK_EPDC_AXI_PODF] = imx_clk_hw_divider("epdc_axi_podf", "epdc_axi_sel", base + 0x34, 12, 3);
|
|
hws[IMX6SL_CLK_GPU2D_OVG_PODF] = imx_clk_hw_divider("gpu2d_ovg_podf", "gpu2d_ovg_sel", base + 0x18, 26, 3);
|
|
hws[IMX6SL_CLK_GPU2D_PODF] = imx_clk_hw_divider("gpu2d_podf", "gpu2d_sel", base + 0x18, 29, 3);
|
|
hws[IMX6SL_CLK_LCDIF_PIX_PRED] = imx_clk_hw_divider("lcdif_pix_pred", "lcdif_pix_sel", base + 0x38, 3, 3);
|
|
hws[IMX6SL_CLK_EPDC_PIX_PRED] = imx_clk_hw_divider("epdc_pix_pred", "epdc_pix_sel", base + 0x38, 12, 3);
|
|
hws[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_hw_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup);
|
|
hws[IMX6SL_CLK_EPDC_PIX_PODF] = imx_clk_hw_divider("epdc_pix_podf", "epdc_pix_pred", base + 0x18, 23, 3);
|
|
hws[IMX6SL_CLK_SPDIF0_PRED] = imx_clk_hw_divider("spdif0_pred", "spdif0_sel", base + 0x30, 25, 3);
|
|
hws[IMX6SL_CLK_SPDIF0_PODF] = imx_clk_hw_divider("spdif0_podf", "spdif0_pred", base + 0x30, 22, 3);
|
|
hws[IMX6SL_CLK_SPDIF1_PRED] = imx_clk_hw_divider("spdif1_pred", "spdif1_sel", base + 0x30, 12, 3);
|
|
hws[IMX6SL_CLK_SPDIF1_PODF] = imx_clk_hw_divider("spdif1_podf", "spdif1_pred", base + 0x30, 9, 3);
|
|
hws[IMX6SL_CLK_EXTERN_AUDIO_PRED] = imx_clk_hw_divider("extern_audio_pred", "extern_audio_sel", base + 0x28, 9, 3);
|
|
hws[IMX6SL_CLK_EXTERN_AUDIO_PODF] = imx_clk_hw_divider("extern_audio_podf", "extern_audio_pred", base + 0x28, 25, 3);
|
|
hws[IMX6SL_CLK_ECSPI_ROOT] = imx_clk_hw_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6);
|
|
hws[IMX6SL_CLK_UART_ROOT] = imx_clk_hw_divider("uart_root", "uart_sel", base + 0x24, 0, 6);
|
|
|
|
/* name parent_name reg shift width busy: reg, shift */
|
|
hws[IMX6SL_CLK_AHB] = imx_clk_hw_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
|
|
hws[IMX6SL_CLK_MMDC_ROOT] = imx_clk_hw_busy_divider("mmdc", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
|
|
hws[IMX6SL_CLK_ARM] = imx_clk_hw_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
|
|
|
|
/* name parent_name reg shift */
|
|
hws[IMX6SL_CLK_ECSPI1] = imx_clk_hw_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
|
|
hws[IMX6SL_CLK_ECSPI2] = imx_clk_hw_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
|
|
hws[IMX6SL_CLK_ECSPI3] = imx_clk_hw_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
|
|
hws[IMX6SL_CLK_ECSPI4] = imx_clk_hw_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
|
|
hws[IMX6SL_CLK_ENET] = imx_clk_hw_gate2("enet", "ipg", base + 0x6c, 10);
|
|
hws[IMX6SL_CLK_EPIT1] = imx_clk_hw_gate2("epit1", "perclk", base + 0x6c, 12);
|
|
hws[IMX6SL_CLK_EPIT2] = imx_clk_hw_gate2("epit2", "perclk", base + 0x6c, 14);
|
|
hws[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_hw_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16);
|
|
hws[IMX6SL_CLK_GPT] = imx_clk_hw_gate2("gpt", "perclk", base + 0x6c, 20);
|
|
hws[IMX6SL_CLK_GPT_SERIAL] = imx_clk_hw_gate2("gpt_serial", "perclk", base + 0x6c, 22);
|
|
hws[IMX6SL_CLK_GPU2D_OVG] = imx_clk_hw_gate2("gpu2d_ovg", "gpu2d_ovg_podf", base + 0x6c, 26);
|
|
hws[IMX6SL_CLK_I2C1] = imx_clk_hw_gate2("i2c1", "perclk", base + 0x70, 6);
|
|
hws[IMX6SL_CLK_I2C2] = imx_clk_hw_gate2("i2c2", "perclk", base + 0x70, 8);
|
|
hws[IMX6SL_CLK_I2C3] = imx_clk_hw_gate2("i2c3", "perclk", base + 0x70, 10);
|
|
hws[IMX6SL_CLK_OCOTP] = imx_clk_hw_gate2("ocotp", "ipg", base + 0x70, 12);
|
|
hws[IMX6SL_CLK_CSI] = imx_clk_hw_gate2("csi", "csi_podf", base + 0x74, 0);
|
|
hws[IMX6SL_CLK_PXP_AXI] = imx_clk_hw_gate2("pxp_axi", "pxp_axi_podf", base + 0x74, 2);
|
|
hws[IMX6SL_CLK_EPDC_AXI] = imx_clk_hw_gate2("epdc_axi", "epdc_axi_podf", base + 0x74, 4);
|
|
hws[IMX6SL_CLK_LCDIF_AXI] = imx_clk_hw_gate2("lcdif_axi", "lcdif_axi_podf", base + 0x74, 6);
|
|
hws[IMX6SL_CLK_LCDIF_PIX] = imx_clk_hw_gate2("lcdif_pix", "lcdif_pix_podf", base + 0x74, 8);
|
|
hws[IMX6SL_CLK_EPDC_PIX] = imx_clk_hw_gate2("epdc_pix", "epdc_pix_podf", base + 0x74, 10);
|
|
hws[IMX6SL_CLK_MMDC_P0_IPG] = imx_clk_hw_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL);
|
|
hws[IMX6SL_CLK_MMDC_P1_IPG] = imx_clk_hw_gate2("mmdc_p1_ipg", "ipg", base + 0x74, 26);
|
|
hws[IMX6SL_CLK_OCRAM] = imx_clk_hw_gate2("ocram", "ocram_podf", base + 0x74, 28);
|
|
hws[IMX6SL_CLK_PWM1] = imx_clk_hw_gate2("pwm1", "perclk", base + 0x78, 16);
|
|
hws[IMX6SL_CLK_PWM2] = imx_clk_hw_gate2("pwm2", "perclk", base + 0x78, 18);
|
|
hws[IMX6SL_CLK_PWM3] = imx_clk_hw_gate2("pwm3", "perclk", base + 0x78, 20);
|
|
hws[IMX6SL_CLK_PWM4] = imx_clk_hw_gate2("pwm4", "perclk", base + 0x78, 22);
|
|
hws[IMX6SL_CLK_SDMA] = imx_clk_hw_gate2("sdma", "ipg", base + 0x7c, 6);
|
|
hws[IMX6SL_CLK_SPBA] = imx_clk_hw_gate2("spba", "ipg", base + 0x7c, 12);
|
|
hws[IMX6SL_CLK_SPDIF] = imx_clk_hw_gate2_shared("spdif", "spdif0_podf", base + 0x7c, 14, &share_count_spdif);
|
|
hws[IMX6SL_CLK_SPDIF_GCLK] = imx_clk_hw_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_spdif);
|
|
hws[IMX6SL_CLK_SSI1_IPG] = imx_clk_hw_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
|
|
hws[IMX6SL_CLK_SSI2_IPG] = imx_clk_hw_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
|
|
hws[IMX6SL_CLK_SSI3_IPG] = imx_clk_hw_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
|
|
hws[IMX6SL_CLK_SSI1] = imx_clk_hw_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
|
|
hws[IMX6SL_CLK_SSI2] = imx_clk_hw_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
|
|
hws[IMX6SL_CLK_SSI3] = imx_clk_hw_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
|
|
hws[IMX6SL_CLK_UART] = imx_clk_hw_gate2("uart", "ipg", base + 0x7c, 24);
|
|
hws[IMX6SL_CLK_UART_SERIAL] = imx_clk_hw_gate2("uart_serial", "uart_root", base + 0x7c, 26);
|
|
hws[IMX6SL_CLK_USBOH3] = imx_clk_hw_gate2("usboh3", "ipg", base + 0x80, 0);
|
|
hws[IMX6SL_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
|
|
hws[IMX6SL_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
|
|
hws[IMX6SL_CLK_USDHC3] = imx_clk_hw_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
|
|
hws[IMX6SL_CLK_USDHC4] = imx_clk_hw_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
|
|
|
|
/* Ensure the MMDC CH0 handshake is bypassed */
|
|
imx_mmdc_mask_handshake(base, 0);
|
|
|
|
imx_check_clk_hws(hws, IMX6SL_CLK_END);
|
|
|
|
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
|
|
|
|
/* Ensure the AHB clk is at 132MHz. */
|
|
ret = clk_set_rate(hws[IMX6SL_CLK_AHB]->clk, 132000000);
|
|
if (ret)
|
|
pr_warn("%s: failed to set AHB clock rate %d!\n",
|
|
__func__, ret);
|
|
|
|
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
|
|
clk_prepare_enable(hws[IMX6SL_CLK_USBPHY1_GATE]->clk);
|
|
clk_prepare_enable(hws[IMX6SL_CLK_USBPHY2_GATE]->clk);
|
|
}
|
|
|
|
/* Audio-related clocks configuration */
|
|
clk_set_parent(hws[IMX6SL_CLK_SPDIF0_SEL]->clk, hws[IMX6SL_CLK_PLL3_PFD3]->clk);
|
|
|
|
/* set PLL5 video as lcdif pix parent clock */
|
|
clk_set_parent(hws[IMX6SL_CLK_LCDIF_PIX_SEL]->clk,
|
|
hws[IMX6SL_CLK_PLL5_VIDEO_DIV]->clk);
|
|
|
|
clk_set_parent(hws[IMX6SL_CLK_LCDIF_AXI_SEL]->clk,
|
|
hws[IMX6SL_CLK_PLL2_PFD2]->clk);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(uart_clk_ids); i++) {
|
|
int index = uart_clk_ids[i];
|
|
|
|
uart_clks[i] = &hws[index]->clk;
|
|
}
|
|
|
|
imx_register_uart_clocks(uart_clks);
|
|
}
|
|
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
|