forked from Minki/linux
0d242698fa
The MVC module has a per channel control bit, based on which it decides to apply channel specific volume/mute settings. When per channel control bit is enabled (which is the default HW configuration), all MVC channel volume/mute can be independently controlled. If the control is disabled, channel-0 volume/mute setting is applied by HW to all remaining channels. Thus add support to leverage this HW feature by exposing master controls for volume/mute. With this, now there are per channel and master volume/mute controls. Users need to just use controls which are suitable for their applications. The per channel control enable/disable is mananged in driver and hidden from users, so that they need to just worry about respective volume/mute controls. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1638278605-28225-1-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
123 lines
3.9 KiB
C
123 lines
3.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* tegra210_mvc.h - Definitions for Tegra210 MVC driver
|
|
*
|
|
* Copyright (c) 2021 NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
*/
|
|
|
|
#ifndef __TEGRA210_MVC_H__
|
|
#define __TEGRA210_MVC_H__
|
|
|
|
/*
|
|
* MVC_RX registers are with respect to XBAR.
|
|
* The data comes from XBAR to MVC.
|
|
*/
|
|
#define TEGRA210_MVC_RX_STATUS 0x0c
|
|
#define TEGRA210_MVC_RX_INT_STATUS 0x10
|
|
#define TEGRA210_MVC_RX_INT_MASK 0x14
|
|
#define TEGRA210_MVC_RX_INT_SET 0x18
|
|
#define TEGRA210_MVC_RX_INT_CLEAR 0x1c
|
|
#define TEGRA210_MVC_RX_CIF_CTRL 0x20
|
|
|
|
/*
|
|
* MVC_TX registers are with respect to XBAR.
|
|
* The data goes out of MVC.
|
|
*/
|
|
#define TEGRA210_MVC_TX_STATUS 0x4c
|
|
#define TEGRA210_MVC_TX_INT_STATUS 0x50
|
|
#define TEGRA210_MVC_TX_INT_MASK 0x54
|
|
#define TEGRA210_MVC_TX_INT_SET 0x58
|
|
#define TEGRA210_MVC_TX_INT_CLEAR 0x5c
|
|
#define TEGRA210_MVC_TX_CIF_CTRL 0x60
|
|
|
|
/* Register offsets from TEGRA210_MVC*_BASE */
|
|
#define TEGRA210_MVC_ENABLE 0x80
|
|
#define TEGRA210_MVC_SOFT_RESET 0x84
|
|
#define TEGRA210_MVC_CG 0x88
|
|
#define TEGRA210_MVC_STATUS 0x90
|
|
#define TEGRA210_MVC_INT_STATUS 0x94
|
|
#define TEGRA210_MVC_CTRL 0xa8
|
|
#define TEGRA210_MVC_SWITCH 0xac
|
|
#define TEGRA210_MVC_INIT_VOL 0xb0
|
|
#define TEGRA210_MVC_TARGET_VOL 0xd0
|
|
#define TEGRA210_MVC_DURATION 0xf0
|
|
#define TEGRA210_MVC_DURATION_INV 0xf4
|
|
#define TEGRA210_MVC_POLY_N1 0xf8
|
|
#define TEGRA210_MVC_POLY_N2 0xfc
|
|
#define TEGRA210_MVC_PEAK_CTRL 0x100
|
|
#define TEGRA210_MVC_CFG_RAM_CTRL 0x104
|
|
#define TEGRA210_MVC_CFG_RAM_DATA 0x108
|
|
#define TEGRA210_MVC_PEAK_VALUE 0x10c
|
|
#define TEGRA210_MVC_CONFIG_ERR_TYPE 0x12c
|
|
|
|
/* Fields in TEGRA210_MVC_ENABLE */
|
|
#define TEGRA210_MVC_EN_SHIFT 0
|
|
#define TEGRA210_MVC_EN (1 << TEGRA210_MVC_EN_SHIFT)
|
|
|
|
#define TEGRA210_MVC_MUTE_SHIFT 8
|
|
#define TEGRA210_MUTE_MASK_EN 0xff
|
|
#define TEGRA210_MVC_MUTE_MASK (TEGRA210_MUTE_MASK_EN << TEGRA210_MVC_MUTE_SHIFT)
|
|
#define TEGRA210_MVC_MUTE_EN (TEGRA210_MUTE_MASK_EN << TEGRA210_MVC_MUTE_SHIFT)
|
|
#define TEGRA210_MVC_CH0_MUTE_EN 1
|
|
|
|
#define TEGRA210_MVC_PER_CHAN_CTRL_EN_SHIFT 30
|
|
#define TEGRA210_MVC_PER_CHAN_CTRL_EN_MASK (1 << TEGRA210_MVC_PER_CHAN_CTRL_EN_SHIFT)
|
|
#define TEGRA210_MVC_PER_CHAN_CTRL_EN (1 << TEGRA210_MVC_PER_CHAN_CTRL_EN_SHIFT)
|
|
|
|
#define TEGRA210_MVC_CURVE_TYPE_SHIFT 1
|
|
#define TEGRA210_MVC_CURVE_TYPE_MASK (1 << TEGRA210_MVC_CURVE_TYPE_SHIFT)
|
|
|
|
#define TEGRA210_MVC_VOLUME_SWITCH_SHIFT 2
|
|
#define TEGRA210_MVC_VOLUME_SWITCH_MASK (1 << TEGRA210_MVC_VOLUME_SWITCH_SHIFT)
|
|
#define TEGRA210_MVC_VOLUME_SWITCH_TRIGGER (1 << TEGRA210_MVC_VOLUME_SWITCH_SHIFT)
|
|
#define TEGRA210_MVC_CTRL_DEFAULT 0x40000003
|
|
|
|
#define TEGRA210_MVC_INIT_VOL_DEFAULT_POLY 0x01000000
|
|
#define TEGRA210_MVC_INIT_VOL_DEFAULT_LINEAR 0x00000000
|
|
|
|
/* Fields in TEGRA210_MVC ram ctrl */
|
|
#define TEGRA210_MVC_CFG_RAM_CTRL_RW_SHIFT 14
|
|
#define TEGRA210_MVC_CFG_RAM_CTRL_RW_WRITE (1 << TEGRA210_MVC_CFG_RAM_CTRL_RW_SHIFT)
|
|
|
|
#define TEGRA210_MVC_CFG_RAM_CTRL_ADDR_INIT_EN_SHIFT 13
|
|
#define TEGRA210_MVC_CFG_RAM_CTRL_ADDR_INIT_EN (1 << TEGRA210_MVC_CFG_RAM_CTRL_ADDR_INIT_EN_SHIFT)
|
|
|
|
#define TEGRA210_MVC_CFG_RAM_CTRL_SEQ_ACCESS_EN_SHIFT 12
|
|
#define TEGRA210_MVC_CFG_RAM_CTRL_SEQ_ACCESS_EN (1 << TEGRA210_MVC_CFG_RAM_CTRL_SEQ_ACCESS_EN_SHIFT)
|
|
|
|
#define TEGRA210_MVC_CFG_RAM_CTRL_ADDR_SHIFT 0
|
|
#define TEGRA210_MVC_CFG_RAM_CTRL_ADDR_MASK (0x1ff << TEGRA210_MVC_CFG_RAM_CTRL_ADDR_SHIFT)
|
|
|
|
#define REG_SIZE 4
|
|
#define TEGRA210_MVC_MAX_CHAN_COUNT 8
|
|
#define TEGRA210_MVC_REG_OFFSET(reg, i) (reg + (REG_SIZE * i))
|
|
|
|
#define TEGRA210_MVC_GET_CHAN(reg, base) (((reg) - (base)) / REG_SIZE)
|
|
|
|
#define TEGRA210_GET_MUTE_VAL(val) (((val) >> TEGRA210_MVC_MUTE_SHIFT) & TEGRA210_MUTE_MASK_EN)
|
|
|
|
#define NUM_GAIN_POLY_COEFFS 9
|
|
|
|
enum {
|
|
CURVE_POLY,
|
|
CURVE_LINEAR,
|
|
};
|
|
|
|
struct tegra210_mvc_gain_params {
|
|
int poly_coeff[NUM_GAIN_POLY_COEFFS];
|
|
int poly_n1;
|
|
int poly_n2;
|
|
int duration;
|
|
int duration_inv;
|
|
};
|
|
|
|
struct tegra210_mvc {
|
|
int volume[TEGRA210_MVC_MAX_CHAN_COUNT];
|
|
unsigned int curve_type;
|
|
unsigned int ctrl_value;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
#endif
|