linux/drivers/net/wireless/ath/ath10k/core.h
Michal Kazior 6782cb696d ath10k: make core registering async
If ath10k was built into the kernel it could stall
booting for 120 seconds by default (60 seconds for
each firmware API variant) waiting for firmware
files before userspace was ready or filesystems
mounted.

Fix this by making the core registering
asynchronous.

This also shoves off about 1 second from boot time
on most systems since the driver is now mostly
initialized in a worker and modprobe takes very
little time to complete.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-26 12:44:44 +03:00

507 lines
11 KiB
C

/*
* Copyright (c) 2005-2011 Atheros Communications Inc.
* Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _CORE_H_
#define _CORE_H_
#include <linux/completion.h>
#include <linux/if_ether.h>
#include <linux/types.h>
#include <linux/pci.h>
#include "htt.h"
#include "htc.h"
#include "hw.h"
#include "targaddrs.h"
#include "wmi.h"
#include "../ath.h"
#include "../regd.h"
#include "../dfs_pattern_detector.h"
#define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
#define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
#define WO(_f) ((_f##_OFFSET) >> 2)
#define ATH10K_SCAN_ID 0
#define WMI_READY_TIMEOUT (5 * HZ)
#define ATH10K_FLUSH_TIMEOUT_HZ (5*HZ)
#define ATH10K_NUM_CHANS 38
/* Antenna noise floor */
#define ATH10K_DEFAULT_NOISE_FLOOR -95
#define ATH10K_MAX_NUM_MGMT_PENDING 128
/* number of failed packets */
#define ATH10K_KICKOUT_THRESHOLD 50
/*
* Use insanely high numbers to make sure that the firmware implementation
* won't start, we have the same functionality already in hostapd. Unit
* is seconds.
*/
#define ATH10K_KEEPALIVE_MIN_IDLE 3747
#define ATH10K_KEEPALIVE_MAX_IDLE 3895
#define ATH10K_KEEPALIVE_MAX_UNRESPONSIVE 3900
struct ath10k;
struct ath10k_skb_cb {
dma_addr_t paddr;
u8 vdev_id;
struct {
u8 tid;
bool is_offchan;
struct ath10k_htt_txbuf *txbuf;
u32 txbuf_paddr;
} __packed htt;
struct {
bool dtim_zero;
bool deliver_cab;
} bcn;
} __packed;
static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb)
{
BUILD_BUG_ON(sizeof(struct ath10k_skb_cb) >
IEEE80211_TX_INFO_DRIVER_DATA_SIZE);
return (struct ath10k_skb_cb *)&IEEE80211_SKB_CB(skb)->driver_data;
}
static inline u32 host_interest_item_address(u32 item_offset)
{
return QCA988X_HOST_INTEREST_ADDRESS + item_offset;
}
struct ath10k_bmi {
bool done_sent;
};
#define ATH10K_MAX_MEM_REQS 16
struct ath10k_mem_chunk {
void *vaddr;
dma_addr_t paddr;
u32 len;
u32 req_id;
};
struct ath10k_wmi {
enum ath10k_htc_ep_id eid;
struct completion service_ready;
struct completion unified_ready;
wait_queue_head_t tx_credits_wq;
struct wmi_cmd_map *cmd;
struct wmi_vdev_param_map *vdev_param;
struct wmi_pdev_param_map *pdev_param;
u32 num_mem_chunks;
struct ath10k_mem_chunk mem_chunks[ATH10K_MAX_MEM_REQS];
};
struct ath10k_peer_stat {
u8 peer_macaddr[ETH_ALEN];
u32 peer_rssi;
u32 peer_tx_rate;
u32 peer_rx_rate; /* 10x only */
};
struct ath10k_target_stats {
/* PDEV stats */
s32 ch_noise_floor;
u32 tx_frame_count;
u32 rx_frame_count;
u32 rx_clear_count;
u32 cycle_count;
u32 phy_err_count;
u32 chan_tx_power;
u32 ack_rx_bad;
u32 rts_bad;
u32 rts_good;
u32 fcs_bad;
u32 no_beacons;
u32 mib_int_count;
/* PDEV TX stats */
s32 comp_queued;
s32 comp_delivered;
s32 msdu_enqued;
s32 mpdu_enqued;
s32 wmm_drop;
s32 local_enqued;
s32 local_freed;
s32 hw_queued;
s32 hw_reaped;
s32 underrun;
s32 tx_abort;
s32 mpdus_requed;
u32 tx_ko;
u32 data_rc;
u32 self_triggers;
u32 sw_retry_failure;
u32 illgl_rate_phy_err;
u32 pdev_cont_xretry;
u32 pdev_tx_timeout;
u32 pdev_resets;
u32 phy_underrun;
u32 txop_ovf;
/* PDEV RX stats */
s32 mid_ppdu_route_change;
s32 status_rcvd;
s32 r0_frags;
s32 r1_frags;
s32 r2_frags;
s32 r3_frags;
s32 htt_msdus;
s32 htt_mpdus;
s32 loc_msdus;
s32 loc_mpdus;
s32 oversize_amsdu;
s32 phy_errs;
s32 phy_err_drop;
s32 mpdu_errs;
/* VDEV STATS */
/* PEER STATS */
u8 peers;
struct ath10k_peer_stat peer_stat[TARGET_NUM_PEERS];
/* TODO: Beacon filter stats */
};
struct ath10k_dfs_stats {
u32 phy_errors;
u32 pulses_total;
u32 pulses_detected;
u32 pulses_discarded;
u32 radar_detected;
};
#define ATH10K_MAX_NUM_PEER_IDS (1 << 11) /* htt rx_desc limit */
struct ath10k_peer {
struct list_head list;
int vdev_id;
u8 addr[ETH_ALEN];
DECLARE_BITMAP(peer_ids, ATH10K_MAX_NUM_PEER_IDS);
struct ieee80211_key_conf *keys[WMI_MAX_KEY_INDEX + 1];
};
struct ath10k_sta {
struct ath10k_vif *arvif;
/* the following are protected by ar->data_lock */
u32 changed; /* IEEE80211_RC_* */
u32 bw;
u32 nss;
u32 smps;
struct work_struct update_wk;
};
#define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
struct ath10k_vif {
struct list_head list;
u32 vdev_id;
enum wmi_vdev_type vdev_type;
enum wmi_vdev_subtype vdev_subtype;
u32 beacon_interval;
u32 dtim_period;
struct sk_buff *beacon;
/* protected by data_lock */
bool beacon_sent;
struct ath10k *ar;
struct ieee80211_vif *vif;
bool is_started;
bool is_up;
u32 aid;
u8 bssid[ETH_ALEN];
struct work_struct wep_key_work;
struct ieee80211_key_conf *wep_keys[WMI_MAX_KEY_INDEX + 1];
u8 def_wep_key_idx;
u8 def_wep_key_newidx;
u16 tx_seq_no;
union {
struct {
u32 uapsd;
} sta;
struct {
/* 127 stations; wmi limit */
u8 tim_bitmap[16];
u8 tim_len;
u32 ssid_len;
u8 ssid[IEEE80211_MAX_SSID_LEN];
bool hidden_ssid;
/* P2P_IE with NoA attribute for P2P_GO case */
u32 noa_len;
u8 *noa_data;
} ap;
} u;
u8 fixed_rate;
u8 fixed_nss;
u8 force_sgi;
bool use_cts_prot;
int num_legacy_stations;
};
struct ath10k_vif_iter {
u32 vdev_id;
struct ath10k_vif *arvif;
};
struct ath10k_debug {
struct dentry *debugfs_phy;
struct ath10k_target_stats target_stats;
u32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE];
struct completion event_stats_compl;
unsigned long htt_stats_mask;
struct delayed_work htt_stats_dwork;
struct ath10k_dfs_stats dfs_stats;
struct ath_dfs_pool_stats dfs_pool_stats;
u32 fw_dbglog_mask;
};
enum ath10k_state {
ATH10K_STATE_OFF = 0,
ATH10K_STATE_ON,
/* When doing firmware recovery the device is first powered down.
* mac80211 is supposed to call in to start() hook later on. It is
* however possible that driver unloading and firmware crash overlap.
* mac80211 can wait on conf_mutex in stop() while the device is
* stopped in ath10k_core_restart() work holding conf_mutex. The state
* RESTARTED means that the device is up and mac80211 has started hw
* reconfiguration. Once mac80211 is done with the reconfiguration we
* set the state to STATE_ON in restart_complete(). */
ATH10K_STATE_RESTARTING,
ATH10K_STATE_RESTARTED,
/* The device has crashed while restarting hw. This state is like ON
* but commands are blocked in HTC and -ECOMM response is given. This
* prevents completion timeouts and makes the driver more responsive to
* userspace commands. This is also prevents recursive recovery. */
ATH10K_STATE_WEDGED,
};
enum ath10k_fw_features {
/* wmi_mgmt_rx_hdr contains extra RSSI information */
ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX = 0,
/* firmware from 10X branch */
ATH10K_FW_FEATURE_WMI_10X = 1,
/* firmware support tx frame management over WMI, otherwise it's HTT */
ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX = 2,
/* Firmware does not support P2P */
ATH10K_FW_FEATURE_NO_P2P = 3,
/* keep last */
ATH10K_FW_FEATURE_COUNT,
};
enum ath10k_dev_flags {
/* Indicates that ath10k device is during CAC phase of DFS */
ATH10K_CAC_RUNNING,
ATH10K_FLAG_FIRST_BOOT_DONE,
ATH10K_FLAG_CORE_REGISTERED,
};
struct ath10k {
struct ath_common ath_common;
struct ieee80211_hw *hw;
struct device *dev;
u8 mac_addr[ETH_ALEN];
u32 chip_id;
u32 target_version;
u8 fw_version_major;
u32 fw_version_minor;
u16 fw_version_release;
u16 fw_version_build;
u32 phy_capability;
u32 hw_min_tx_power;
u32 hw_max_tx_power;
u32 ht_cap_info;
u32 vht_cap_info;
u32 num_rf_chains;
DECLARE_BITMAP(fw_features, ATH10K_FW_FEATURE_COUNT);
struct targetdef *targetdef;
struct hostdef *hostdef;
bool p2p;
struct {
void *priv;
const struct ath10k_hif_ops *ops;
} hif;
struct completion target_suspend;
struct ath10k_bmi bmi;
struct ath10k_wmi wmi;
struct ath10k_htc htc;
struct ath10k_htt htt;
struct ath10k_hw_params {
u32 id;
const char *name;
u32 patch_load_addr;
struct ath10k_hw_params_fw {
const char *dir;
const char *fw;
const char *otp;
const char *board;
} fw;
} hw_params;
const struct firmware *board;
const void *board_data;
size_t board_len;
const struct firmware *otp;
const void *otp_data;
size_t otp_len;
const struct firmware *firmware;
const void *firmware_data;
size_t firmware_len;
int fw_api;
struct {
struct completion started;
struct completion completed;
struct completion on_channel;
struct timer_list timeout;
bool is_roc;
bool in_progress;
bool aborting;
int vdev_id;
int roc_freq;
} scan;
struct {
struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
} mac;
/* should never be NULL; needed for regular htt rx */
struct ieee80211_channel *rx_channel;
/* valid during scan; needed for mgmt rx during scan */
struct ieee80211_channel *scan_channel;
/* current operating channel definition */
struct cfg80211_chan_def chandef;
int free_vdev_map;
bool promisc;
bool monitor;
int monitor_vdev_id;
bool monitor_started;
unsigned int filter_flags;
unsigned long dev_flags;
u32 dfs_block_radar_events;
/* protected by conf_mutex */
bool radar_enabled;
int num_started_vdevs;
/* Protected by conf-mutex */
u8 supp_tx_chainmask;
u8 supp_rx_chainmask;
u8 cfg_tx_chainmask;
u8 cfg_rx_chainmask;
struct wmi_pdev_set_wmm_params_arg wmm_params;
struct completion install_key_done;
struct completion vdev_setup_done;
struct workqueue_struct *workqueue;
/* prevents concurrent FW reconfiguration */
struct mutex conf_mutex;
/* protects shared structure data */
spinlock_t data_lock;
struct list_head arvifs;
struct list_head peers;
wait_queue_head_t peer_mapping_wq;
/* number of created peers; protected by data_lock */
int num_peers;
struct work_struct offchan_tx_work;
struct sk_buff_head offchan_tx_queue;
struct completion offchan_tx_completed;
struct sk_buff *offchan_tx_skb;
struct work_struct wmi_mgmt_tx_work;
struct sk_buff_head wmi_mgmt_tx_queue;
enum ath10k_state state;
struct work_struct register_work;
struct work_struct restart_work;
/* cycle count is reported twice for each visited channel during scan.
* access protected by data_lock */
u32 survey_last_rx_clear_count;
u32 survey_last_cycle_count;
struct survey_info survey[ATH10K_NUM_CHANS];
struct dfs_pattern_detector *dfs_detector;
#ifdef CONFIG_ATH10K_DEBUGFS
struct ath10k_debug debug;
#endif
};
struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
const struct ath10k_hif_ops *hif_ops);
void ath10k_core_destroy(struct ath10k *ar);
int ath10k_core_start(struct ath10k *ar);
int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt);
void ath10k_core_stop(struct ath10k *ar);
int ath10k_core_register(struct ath10k *ar, u32 chip_id);
void ath10k_core_unregister(struct ath10k *ar);
#endif /* _CORE_H_ */