forked from Minki/linux
ab3a3b7b0c
When I had rewritten the code for ixgbe_clear_vf_vlans() it looks like I had transitioned back and forth between using word as an offset and using word as a register offset. As a result I honestly don't see how the code was working before other than the fact that resetting the VLANs on the VF like didn't do much to clear them. Another issue found is that the mask was using a divide instead of a modulus. As a result the mask bit was incorrectly being set to either bit 0 or 1 based on the value of the VF being tested. As a result the wrong VFs were having their VLANs cleared if they were enabled. I have updated the code so that word represents the offset in the array. This way we can use the modulus and xor operations and they will make sense instead of being performed on a 4 byte aligned value. I replaced the statement "(word % 2) ^ 1" with "~word % 2" in order to reduce the line length as the line exceeded 80 characters with the register name inserted. The two should be equivalent so the change should be safe. Reported-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
||
|---|---|---|
| .. | ||
| e1000 | ||
| e1000e | ||
| fm10k | ||
| i40e | ||
| i40evf | ||
| igb | ||
| igbvf | ||
| ixgb | ||
| ixgbe | ||
| ixgbevf | ||
| e100.c | ||
| Kconfig | ||
| Makefile | ||