forked from Minki/linux
8ee94ec065
add ufs node document for Hisilicon. Signed-off-by: Li Wei <liwei213@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
42 lines
1.7 KiB
Plaintext
42 lines
1.7 KiB
Plaintext
* Hisilicon Universal Flash Storage (UFS) Host Controller
|
|
|
|
UFS nodes are defined to describe on-chip UFS hardware macro.
|
|
Each UFS Host Controller should have its own node.
|
|
|
|
Required properties:
|
|
- compatible : compatible list, contains one of the following -
|
|
"hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
|
|
host controller present on Hi36xx chipset.
|
|
- reg : should contain UFS register address space & UFS SYS CTRL register address,
|
|
- interrupt-parent : interrupt device
|
|
- interrupts : interrupt number
|
|
- clocks : List of phandle and clock specifier pairs
|
|
- clock-names : List of clock input name strings sorted in the same
|
|
order as the clocks property. "ref_clk", "phy_clk" is optional
|
|
- freq-table-hz : Array of <min max> operating frequencies stored in the same
|
|
order as the clocks property. If this property is not
|
|
defined or a value in the array is "0" then it is assumed
|
|
that the frequency is set by the parent clock or a
|
|
fixed rate clock source.
|
|
- resets : describe reset node register
|
|
- reset-names : reset node register, the "rst" corresponds to reset the whole UFS IP.
|
|
|
|
Example:
|
|
|
|
ufs: ufs@ff3b0000 {
|
|
compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
|
|
/* 0: HCI standard */
|
|
/* 1: UFS SYS CTRL */
|
|
reg = <0x0 0xff3b0000 0x0 0x1000>,
|
|
<0x0 0xff3b1000 0x0 0x1000>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
|
|
<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
|
|
clock-names = "ref_clk", "phy_clk";
|
|
freq-table-hz = <0 0>, <0 0>;
|
|
/* offset: 0x84; bit: 12 */
|
|
resets = <&crg_rst 0x84 12>;
|
|
reset-names = "rst";
|
|
};
|