forked from Minki/linux
bea67aeab0
In two different instances the return value of "of_property_read_u32" API was neither captured nor checked. Fixed it by capturing the return value and then checking for any error. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Addresses-Coverity: "check_return" Link: https://lore.kernel.org/r/1605201148-4508-9-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
416 lines
11 KiB
C
416 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Xilinx gpio driver for xps/axi_gpio IP.
|
|
*
|
|
* Copyright 2008 - 2013 Xilinx, Inc.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Register Offset Definitions */
|
|
#define XGPIO_DATA_OFFSET (0x0) /* Data register */
|
|
#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */
|
|
|
|
#define XGPIO_CHANNEL_OFFSET 0x8
|
|
|
|
/* Read/Write access to the GPIO registers */
|
|
#if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86)
|
|
# define xgpio_readreg(offset) readl(offset)
|
|
# define xgpio_writereg(offset, val) writel(val, offset)
|
|
#else
|
|
# define xgpio_readreg(offset) __raw_readl(offset)
|
|
# define xgpio_writereg(offset, val) __raw_writel(val, offset)
|
|
#endif
|
|
|
|
/**
|
|
* struct xgpio_instance - Stores information about GPIO device
|
|
* @gc: GPIO chip
|
|
* @regs: register block
|
|
* @gpio_width: GPIO width for every channel
|
|
* @gpio_state: GPIO state shadow register
|
|
* @gpio_dir: GPIO direction shadow register
|
|
* @gpio_lock: Lock used for synchronization
|
|
* @clk: clock resource for this driver
|
|
*/
|
|
struct xgpio_instance {
|
|
struct gpio_chip gc;
|
|
void __iomem *regs;
|
|
unsigned int gpio_width[2];
|
|
u32 gpio_state[2];
|
|
u32 gpio_dir[2];
|
|
spinlock_t gpio_lock[2];
|
|
struct clk *clk;
|
|
};
|
|
|
|
static inline int xgpio_index(struct xgpio_instance *chip, int gpio)
|
|
{
|
|
if (gpio >= chip->gpio_width[0])
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio)
|
|
{
|
|
if (xgpio_index(chip, gpio))
|
|
return XGPIO_CHANNEL_OFFSET;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int xgpio_offset(struct xgpio_instance *chip, int gpio)
|
|
{
|
|
if (xgpio_index(chip, gpio))
|
|
return gpio - chip->gpio_width[0];
|
|
|
|
return gpio;
|
|
}
|
|
|
|
/**
|
|
* xgpio_get - Read the specified signal of the GPIO device.
|
|
* @gc: Pointer to gpio_chip device structure.
|
|
* @gpio: GPIO signal number.
|
|
*
|
|
* This function reads the specified signal of the GPIO device.
|
|
*
|
|
* Return:
|
|
* 0 if direction of GPIO signals is set as input otherwise it
|
|
* returns negative error value.
|
|
*/
|
|
static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
|
|
{
|
|
struct xgpio_instance *chip = gpiochip_get_data(gc);
|
|
u32 val;
|
|
|
|
val = xgpio_readreg(chip->regs + XGPIO_DATA_OFFSET +
|
|
xgpio_regoffset(chip, gpio));
|
|
|
|
return !!(val & BIT(xgpio_offset(chip, gpio)));
|
|
}
|
|
|
|
/**
|
|
* xgpio_set - Write the specified signal of the GPIO device.
|
|
* @gc: Pointer to gpio_chip device structure.
|
|
* @gpio: GPIO signal number.
|
|
* @val: Value to be written to specified signal.
|
|
*
|
|
* This function writes the specified value in to the specified signal of the
|
|
* GPIO device.
|
|
*/
|
|
static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
|
|
{
|
|
unsigned long flags;
|
|
struct xgpio_instance *chip = gpiochip_get_data(gc);
|
|
int index = xgpio_index(chip, gpio);
|
|
int offset = xgpio_offset(chip, gpio);
|
|
|
|
spin_lock_irqsave(&chip->gpio_lock[index], flags);
|
|
|
|
/* Write to GPIO signal and set its direction to output */
|
|
if (val)
|
|
chip->gpio_state[index] |= BIT(offset);
|
|
else
|
|
chip->gpio_state[index] &= ~BIT(offset);
|
|
|
|
xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
|
|
xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
|
|
|
|
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
|
|
}
|
|
|
|
/**
|
|
* xgpio_set_multiple - Write the specified signals of the GPIO device.
|
|
* @gc: Pointer to gpio_chip device structure.
|
|
* @mask: Mask of the GPIOS to modify.
|
|
* @bits: Value to be wrote on each GPIO
|
|
*
|
|
* This function writes the specified values into the specified signals of the
|
|
* GPIO devices.
|
|
*/
|
|
static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
|
|
unsigned long *bits)
|
|
{
|
|
unsigned long flags;
|
|
struct xgpio_instance *chip = gpiochip_get_data(gc);
|
|
int index = xgpio_index(chip, 0);
|
|
int offset, i;
|
|
|
|
spin_lock_irqsave(&chip->gpio_lock[index], flags);
|
|
|
|
/* Write to GPIO signals */
|
|
for (i = 0; i < gc->ngpio; i++) {
|
|
if (*mask == 0)
|
|
break;
|
|
/* Once finished with an index write it out to the register */
|
|
if (index != xgpio_index(chip, i)) {
|
|
xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
|
|
index * XGPIO_CHANNEL_OFFSET,
|
|
chip->gpio_state[index]);
|
|
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
|
|
index = xgpio_index(chip, i);
|
|
spin_lock_irqsave(&chip->gpio_lock[index], flags);
|
|
}
|
|
if (__test_and_clear_bit(i, mask)) {
|
|
offset = xgpio_offset(chip, i);
|
|
if (test_bit(i, bits))
|
|
chip->gpio_state[index] |= BIT(offset);
|
|
else
|
|
chip->gpio_state[index] &= ~BIT(offset);
|
|
}
|
|
}
|
|
|
|
xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
|
|
index * XGPIO_CHANNEL_OFFSET, chip->gpio_state[index]);
|
|
|
|
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
|
|
}
|
|
|
|
/**
|
|
* xgpio_dir_in - Set the direction of the specified GPIO signal as input.
|
|
* @gc: Pointer to gpio_chip device structure.
|
|
* @gpio: GPIO signal number.
|
|
*
|
|
* Return:
|
|
* 0 - if direction of GPIO signals is set as input
|
|
* otherwise it returns negative error value.
|
|
*/
|
|
static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
|
|
{
|
|
unsigned long flags;
|
|
struct xgpio_instance *chip = gpiochip_get_data(gc);
|
|
int index = xgpio_index(chip, gpio);
|
|
int offset = xgpio_offset(chip, gpio);
|
|
|
|
spin_lock_irqsave(&chip->gpio_lock[index], flags);
|
|
|
|
/* Set the GPIO bit in shadow register and set direction as input */
|
|
chip->gpio_dir[index] |= BIT(offset);
|
|
xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET +
|
|
xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
|
|
|
|
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xgpio_dir_out - Set the direction of the specified GPIO signal as output.
|
|
* @gc: Pointer to gpio_chip device structure.
|
|
* @gpio: GPIO signal number.
|
|
* @val: Value to be written to specified signal.
|
|
*
|
|
* This function sets the direction of specified GPIO signal as output.
|
|
*
|
|
* Return:
|
|
* If all GPIO signals of GPIO chip is configured as input then it returns
|
|
* error otherwise it returns 0.
|
|
*/
|
|
static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
|
|
{
|
|
unsigned long flags;
|
|
struct xgpio_instance *chip = gpiochip_get_data(gc);
|
|
int index = xgpio_index(chip, gpio);
|
|
int offset = xgpio_offset(chip, gpio);
|
|
|
|
spin_lock_irqsave(&chip->gpio_lock[index], flags);
|
|
|
|
/* Write state of GPIO signal */
|
|
if (val)
|
|
chip->gpio_state[index] |= BIT(offset);
|
|
else
|
|
chip->gpio_state[index] &= ~BIT(offset);
|
|
xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
|
|
xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
|
|
|
|
/* Clear the GPIO bit in shadow register and set direction as output */
|
|
chip->gpio_dir[index] &= ~BIT(offset);
|
|
xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET +
|
|
xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
|
|
|
|
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xgpio_save_regs - Set initial values of GPIO pins
|
|
* @chip: Pointer to GPIO instance
|
|
*/
|
|
static void xgpio_save_regs(struct xgpio_instance *chip)
|
|
{
|
|
xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET, chip->gpio_state[0]);
|
|
xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]);
|
|
|
|
if (!chip->gpio_width[1])
|
|
return;
|
|
|
|
xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET,
|
|
chip->gpio_state[1]);
|
|
xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET,
|
|
chip->gpio_dir[1]);
|
|
}
|
|
|
|
/**
|
|
* xgpio_remove - Remove method for the GPIO device.
|
|
* @pdev: pointer to the platform device
|
|
*
|
|
* This function remove gpiochips and frees all the allocated resources.
|
|
*
|
|
* Return: 0 always
|
|
*/
|
|
static int xgpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct xgpio_instance *gpio = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(gpio->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xgpio_of_probe - Probe method for the GPIO device.
|
|
* @pdev: pointer to the platform device
|
|
*
|
|
* Return:
|
|
* It returns 0, if the driver is bound to the GPIO device, or
|
|
* a negative value if there is an error.
|
|
*/
|
|
static int xgpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct xgpio_instance *chip;
|
|
int status = 0;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
u32 is_dual;
|
|
|
|
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, chip);
|
|
|
|
/* Update GPIO state shadow register with default value */
|
|
if (of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]))
|
|
chip->gpio_state[0] = 0x0;
|
|
|
|
/* Update GPIO direction shadow register with default value */
|
|
if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0]))
|
|
chip->gpio_dir[0] = 0xFFFFFFFF;
|
|
|
|
/*
|
|
* Check device node and parent device node for device width
|
|
* and assume default width of 32
|
|
*/
|
|
if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0]))
|
|
chip->gpio_width[0] = 32;
|
|
|
|
spin_lock_init(&chip->gpio_lock[0]);
|
|
|
|
if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
|
|
is_dual = 0;
|
|
|
|
if (is_dual) {
|
|
/* Update GPIO state shadow register with default value */
|
|
if (of_property_read_u32(np, "xlnx,dout-default-2",
|
|
&chip->gpio_state[1]))
|
|
chip->gpio_state[1] = 0x0;
|
|
|
|
/* Update GPIO direction shadow register with default value */
|
|
if (of_property_read_u32(np, "xlnx,tri-default-2",
|
|
&chip->gpio_dir[1]))
|
|
chip->gpio_dir[1] = 0xFFFFFFFF;
|
|
|
|
/*
|
|
* Check device node and parent device node for device width
|
|
* and assume default width of 32
|
|
*/
|
|
if (of_property_read_u32(np, "xlnx,gpio2-width",
|
|
&chip->gpio_width[1]))
|
|
chip->gpio_width[1] = 32;
|
|
|
|
spin_lock_init(&chip->gpio_lock[1]);
|
|
}
|
|
|
|
chip->gc.base = -1;
|
|
chip->gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1];
|
|
chip->gc.parent = &pdev->dev;
|
|
chip->gc.direction_input = xgpio_dir_in;
|
|
chip->gc.direction_output = xgpio_dir_out;
|
|
chip->gc.get = xgpio_get;
|
|
chip->gc.set = xgpio_set;
|
|
chip->gc.set_multiple = xgpio_set_multiple;
|
|
|
|
chip->gc.label = dev_name(&pdev->dev);
|
|
|
|
chip->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(chip->regs)) {
|
|
dev_err(&pdev->dev, "failed to ioremap memory resource\n");
|
|
return PTR_ERR(chip->regs);
|
|
}
|
|
|
|
chip->clk = devm_clk_get_optional(&pdev->dev, NULL);
|
|
if (IS_ERR(chip->clk)) {
|
|
if (PTR_ERR(chip->clk) != -EPROBE_DEFER)
|
|
dev_dbg(&pdev->dev, "Input clock not found\n");
|
|
return PTR_ERR(chip->clk);
|
|
}
|
|
|
|
status = clk_prepare_enable(chip->clk);
|
|
if (status < 0) {
|
|
dev_err(&pdev->dev, "Failed to prepare clk\n");
|
|
return status;
|
|
}
|
|
|
|
xgpio_save_regs(chip);
|
|
|
|
status = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
|
|
if (status) {
|
|
dev_err(&pdev->dev, "failed to add GPIO chip\n");
|
|
clk_disable_unprepare(chip->clk);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id xgpio_of_match[] = {
|
|
{ .compatible = "xlnx,xps-gpio-1.00.a", },
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, xgpio_of_match);
|
|
|
|
static struct platform_driver xgpio_plat_driver = {
|
|
.probe = xgpio_probe,
|
|
.remove = xgpio_remove,
|
|
.driver = {
|
|
.name = "gpio-xilinx",
|
|
.of_match_table = xgpio_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init xgpio_init(void)
|
|
{
|
|
return platform_driver_register(&xgpio_plat_driver);
|
|
}
|
|
|
|
subsys_initcall(xgpio_init);
|
|
|
|
static void __exit xgpio_exit(void)
|
|
{
|
|
platform_driver_unregister(&xgpio_plat_driver);
|
|
}
|
|
module_exit(xgpio_exit);
|
|
|
|
MODULE_AUTHOR("Xilinx, Inc.");
|
|
MODULE_DESCRIPTION("Xilinx GPIO driver");
|
|
MODULE_LICENSE("GPL");
|