forked from Minki/linux
b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
339 lines
17 KiB
C
339 lines
17 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/* $Id: sunbmac.h,v 1.7 2000/07/11 22:35:22 davem Exp $
|
|
* sunbmac.h: Defines for the Sun "Big MAC" 100baseT ethernet cards.
|
|
*
|
|
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
|
|
*/
|
|
|
|
#ifndef _SUNBMAC_H
|
|
#define _SUNBMAC_H
|
|
|
|
/* QEC global registers. */
|
|
#define GLOB_CTRL 0x00UL /* Control */
|
|
#define GLOB_STAT 0x04UL /* Status */
|
|
#define GLOB_PSIZE 0x08UL /* Packet Size */
|
|
#define GLOB_MSIZE 0x0cUL /* Local-mem size (64K) */
|
|
#define GLOB_RSIZE 0x10UL /* Receive partition size */
|
|
#define GLOB_TSIZE 0x14UL /* Transmit partition size */
|
|
#define GLOB_REG_SIZE 0x18UL
|
|
|
|
#define GLOB_CTRL_MMODE 0x40000000 /* MACE qec mode */
|
|
#define GLOB_CTRL_BMODE 0x10000000 /* BigMAC qec mode */
|
|
#define GLOB_CTRL_EPAR 0x00000020 /* Enable parity */
|
|
#define GLOB_CTRL_ACNTRL 0x00000018 /* SBUS arbitration control */
|
|
#define GLOB_CTRL_B64 0x00000004 /* 64 byte dvma bursts */
|
|
#define GLOB_CTRL_B32 0x00000002 /* 32 byte dvma bursts */
|
|
#define GLOB_CTRL_B16 0x00000000 /* 16 byte dvma bursts */
|
|
#define GLOB_CTRL_RESET 0x00000001 /* Reset the QEC */
|
|
|
|
#define GLOB_STAT_TX 0x00000008 /* BigMAC Transmit IRQ */
|
|
#define GLOB_STAT_RX 0x00000004 /* BigMAC Receive IRQ */
|
|
#define GLOB_STAT_BM 0x00000002 /* BigMAC Global IRQ */
|
|
#define GLOB_STAT_ER 0x00000001 /* BigMAC Error IRQ */
|
|
|
|
#define GLOB_PSIZE_2048 0x00 /* 2k packet size */
|
|
#define GLOB_PSIZE_4096 0x01 /* 4k packet size */
|
|
#define GLOB_PSIZE_6144 0x10 /* 6k packet size */
|
|
#define GLOB_PSIZE_8192 0x11 /* 8k packet size */
|
|
|
|
/* QEC BigMAC channel registers. */
|
|
#define CREG_CTRL 0x00UL /* Control */
|
|
#define CREG_STAT 0x04UL /* Status */
|
|
#define CREG_RXDS 0x08UL /* RX descriptor ring ptr */
|
|
#define CREG_TXDS 0x0cUL /* TX descriptor ring ptr */
|
|
#define CREG_RIMASK 0x10UL /* RX Interrupt Mask */
|
|
#define CREG_TIMASK 0x14UL /* TX Interrupt Mask */
|
|
#define CREG_QMASK 0x18UL /* QEC Error Interrupt Mask */
|
|
#define CREG_BMASK 0x1cUL /* BigMAC Error Interrupt Mask*/
|
|
#define CREG_RXWBUFPTR 0x20UL /* Local memory rx write ptr */
|
|
#define CREG_RXRBUFPTR 0x24UL /* Local memory rx read ptr */
|
|
#define CREG_TXWBUFPTR 0x28UL /* Local memory tx write ptr */
|
|
#define CREG_TXRBUFPTR 0x2cUL /* Local memory tx read ptr */
|
|
#define CREG_CCNT 0x30UL /* Collision Counter */
|
|
#define CREG_REG_SIZE 0x34UL
|
|
|
|
#define CREG_CTRL_TWAKEUP 0x00000001 /* Transmitter Wakeup, 'go'. */
|
|
|
|
#define CREG_STAT_BERROR 0x80000000 /* BigMAC error */
|
|
#define CREG_STAT_TXIRQ 0x00200000 /* Transmit Interrupt */
|
|
#define CREG_STAT_TXDERROR 0x00080000 /* TX Descriptor is bogus */
|
|
#define CREG_STAT_TXLERR 0x00040000 /* Late Transmit Error */
|
|
#define CREG_STAT_TXPERR 0x00020000 /* Transmit Parity Error */
|
|
#define CREG_STAT_TXSERR 0x00010000 /* Transmit SBUS error ack */
|
|
#define CREG_STAT_RXIRQ 0x00000020 /* Receive Interrupt */
|
|
#define CREG_STAT_RXDROP 0x00000010 /* Dropped a RX'd packet */
|
|
#define CREG_STAT_RXSMALL 0x00000008 /* Receive buffer too small */
|
|
#define CREG_STAT_RXLERR 0x00000004 /* Receive Late Error */
|
|
#define CREG_STAT_RXPERR 0x00000002 /* Receive Parity Error */
|
|
#define CREG_STAT_RXSERR 0x00000001 /* Receive SBUS Error ACK */
|
|
|
|
#define CREG_STAT_ERRORS (CREG_STAT_BERROR|CREG_STAT_TXDERROR|CREG_STAT_TXLERR| \
|
|
CREG_STAT_TXPERR|CREG_STAT_TXSERR|CREG_STAT_RXDROP| \
|
|
CREG_STAT_RXSMALL|CREG_STAT_RXLERR|CREG_STAT_RXPERR| \
|
|
CREG_STAT_RXSERR)
|
|
|
|
#define CREG_QMASK_TXDERROR 0x00080000 /* TXD error */
|
|
#define CREG_QMASK_TXLERR 0x00040000 /* TX late error */
|
|
#define CREG_QMASK_TXPERR 0x00020000 /* TX parity error */
|
|
#define CREG_QMASK_TXSERR 0x00010000 /* TX sbus error ack */
|
|
#define CREG_QMASK_RXDROP 0x00000010 /* RX drop */
|
|
#define CREG_QMASK_RXBERROR 0x00000008 /* RX buffer error */
|
|
#define CREG_QMASK_RXLEERR 0x00000004 /* RX late error */
|
|
#define CREG_QMASK_RXPERR 0x00000002 /* RX parity error */
|
|
#define CREG_QMASK_RXSERR 0x00000001 /* RX sbus error ack */
|
|
|
|
/* BIGMAC core registers */
|
|
#define BMAC_XIFCFG 0x000UL /* XIF config register */
|
|
/* 0x004-->0x0fc, reserved */
|
|
#define BMAC_STATUS 0x100UL /* Status register, clear on read */
|
|
#define BMAC_IMASK 0x104UL /* Interrupt mask register */
|
|
/* 0x108-->0x204, reserved */
|
|
#define BMAC_TXSWRESET 0x208UL /* Transmitter software reset */
|
|
#define BMAC_TXCFG 0x20cUL /* Transmitter config register */
|
|
#define BMAC_IGAP1 0x210UL /* Inter-packet gap 1 */
|
|
#define BMAC_IGAP2 0x214UL /* Inter-packet gap 2 */
|
|
#define BMAC_ALIMIT 0x218UL /* Transmit attempt limit */
|
|
#define BMAC_STIME 0x21cUL /* Transmit slot time */
|
|
#define BMAC_PLEN 0x220UL /* Size of transmit preamble */
|
|
#define BMAC_PPAT 0x224UL /* Pattern for transmit preamble */
|
|
#define BMAC_TXDELIM 0x228UL /* Transmit delimiter */
|
|
#define BMAC_JSIZE 0x22cUL /* Toe jam... */
|
|
#define BMAC_TXPMAX 0x230UL /* Transmit max pkt size */
|
|
#define BMAC_TXPMIN 0x234UL /* Transmit min pkt size */
|
|
#define BMAC_PATTEMPT 0x238UL /* Count of transmit peak attempts */
|
|
#define BMAC_DTCTR 0x23cUL /* Transmit defer timer */
|
|
#define BMAC_NCCTR 0x240UL /* Transmit normal-collision counter */
|
|
#define BMAC_FCCTR 0x244UL /* Transmit first-collision counter */
|
|
#define BMAC_EXCTR 0x248UL /* Transmit excess-collision counter */
|
|
#define BMAC_LTCTR 0x24cUL /* Transmit late-collision counter */
|
|
#define BMAC_RSEED 0x250UL /* Transmit random number seed */
|
|
#define BMAC_TXSMACHINE 0x254UL /* Transmit state machine */
|
|
/* 0x258-->0x304, reserved */
|
|
#define BMAC_RXSWRESET 0x308UL /* Receiver software reset */
|
|
#define BMAC_RXCFG 0x30cUL /* Receiver config register */
|
|
#define BMAC_RXPMAX 0x310UL /* Receive max pkt size */
|
|
#define BMAC_RXPMIN 0x314UL /* Receive min pkt size */
|
|
#define BMAC_MACADDR2 0x318UL /* Ether address register 2 */
|
|
#define BMAC_MACADDR1 0x31cUL /* Ether address register 1 */
|
|
#define BMAC_MACADDR0 0x320UL /* Ether address register 0 */
|
|
#define BMAC_FRCTR 0x324UL /* Receive frame receive counter */
|
|
#define BMAC_GLECTR 0x328UL /* Receive giant-length error counter */
|
|
#define BMAC_UNALECTR 0x32cUL /* Receive unaligned error counter */
|
|
#define BMAC_RCRCECTR 0x330UL /* Receive CRC error counter */
|
|
#define BMAC_RXSMACHINE 0x334UL /* Receiver state machine */
|
|
#define BMAC_RXCVALID 0x338UL /* Receiver code violation */
|
|
/* 0x33c, reserved */
|
|
#define BMAC_HTABLE3 0x340UL /* Hash table 3 */
|
|
#define BMAC_HTABLE2 0x344UL /* Hash table 2 */
|
|
#define BMAC_HTABLE1 0x348UL /* Hash table 1 */
|
|
#define BMAC_HTABLE0 0x34cUL /* Hash table 0 */
|
|
#define BMAC_AFILTER2 0x350UL /* Address filter 2 */
|
|
#define BMAC_AFILTER1 0x354UL /* Address filter 1 */
|
|
#define BMAC_AFILTER0 0x358UL /* Address filter 0 */
|
|
#define BMAC_AFMASK 0x35cUL /* Address filter mask */
|
|
#define BMAC_REG_SIZE 0x360UL
|
|
|
|
/* BigMac XIF config register. */
|
|
#define BIGMAC_XCFG_ODENABLE 0x00000001 /* Output driver enable */
|
|
#define BIGMAC_XCFG_RESV 0x00000002 /* Reserved, write always as 1 */
|
|
#define BIGMAC_XCFG_MLBACK 0x00000004 /* Loopback-mode MII enable */
|
|
#define BIGMAC_XCFG_SMODE 0x00000008 /* Enable serial mode */
|
|
|
|
/* BigMAC status register. */
|
|
#define BIGMAC_STAT_GOTFRAME 0x00000001 /* Received a frame */
|
|
#define BIGMAC_STAT_RCNTEXP 0x00000002 /* Receive frame counter expired */
|
|
#define BIGMAC_STAT_ACNTEXP 0x00000004 /* Align-error counter expired */
|
|
#define BIGMAC_STAT_CCNTEXP 0x00000008 /* CRC-error counter expired */
|
|
#define BIGMAC_STAT_LCNTEXP 0x00000010 /* Length-error counter expired */
|
|
#define BIGMAC_STAT_RFIFOVF 0x00000020 /* Receive FIFO overflow */
|
|
#define BIGMAC_STAT_CVCNTEXP 0x00000040 /* Code-violation counter expired */
|
|
#define BIGMAC_STAT_SENTFRAME 0x00000100 /* Transmitted a frame */
|
|
#define BIGMAC_STAT_TFIFO_UND 0x00000200 /* Transmit FIFO underrun */
|
|
#define BIGMAC_STAT_MAXPKTERR 0x00000400 /* Max-packet size error */
|
|
#define BIGMAC_STAT_NCNTEXP 0x00000800 /* Normal-collision counter expired */
|
|
#define BIGMAC_STAT_ECNTEXP 0x00001000 /* Excess-collision counter expired */
|
|
#define BIGMAC_STAT_LCCNTEXP 0x00002000 /* Late-collision counter expired */
|
|
#define BIGMAC_STAT_FCNTEXP 0x00004000 /* First-collision counter expired */
|
|
#define BIGMAC_STAT_DTIMEXP 0x00008000 /* Defer-timer expired */
|
|
|
|
/* BigMAC interrupt mask register. */
|
|
#define BIGMAC_IMASK_GOTFRAME 0x00000001 /* Received a frame */
|
|
#define BIGMAC_IMASK_RCNTEXP 0x00000002 /* Receive frame counter expired */
|
|
#define BIGMAC_IMASK_ACNTEXP 0x00000004 /* Align-error counter expired */
|
|
#define BIGMAC_IMASK_CCNTEXP 0x00000008 /* CRC-error counter expired */
|
|
#define BIGMAC_IMASK_LCNTEXP 0x00000010 /* Length-error counter expired */
|
|
#define BIGMAC_IMASK_RFIFOVF 0x00000020 /* Receive FIFO overflow */
|
|
#define BIGMAC_IMASK_CVCNTEXP 0x00000040 /* Code-violation counter expired */
|
|
#define BIGMAC_IMASK_SENTFRAME 0x00000100 /* Transmitted a frame */
|
|
#define BIGMAC_IMASK_TFIFO_UND 0x00000200 /* Transmit FIFO underrun */
|
|
#define BIGMAC_IMASK_MAXPKTERR 0x00000400 /* Max-packet size error */
|
|
#define BIGMAC_IMASK_NCNTEXP 0x00000800 /* Normal-collision counter expired */
|
|
#define BIGMAC_IMASK_ECNTEXP 0x00001000 /* Excess-collision counter expired */
|
|
#define BIGMAC_IMASK_LCCNTEXP 0x00002000 /* Late-collision counter expired */
|
|
#define BIGMAC_IMASK_FCNTEXP 0x00004000 /* First-collision counter expired */
|
|
#define BIGMAC_IMASK_DTIMEXP 0x00008000 /* Defer-timer expired */
|
|
|
|
/* BigMac transmit config register. */
|
|
#define BIGMAC_TXCFG_ENABLE 0x00000001 /* Enable the transmitter */
|
|
#define BIGMAC_TXCFG_FIFO 0x00000010 /* Default tx fthresh... */
|
|
#define BIGMAC_TXCFG_SMODE 0x00000020 /* Enable slow transmit mode */
|
|
#define BIGMAC_TXCFG_CIGN 0x00000040 /* Ignore transmit collisions */
|
|
#define BIGMAC_TXCFG_FCSOFF 0x00000080 /* Do not emit FCS */
|
|
#define BIGMAC_TXCFG_DBACKOFF 0x00000100 /* Disable backoff */
|
|
#define BIGMAC_TXCFG_FULLDPLX 0x00000200 /* Enable full-duplex */
|
|
|
|
/* BigMac receive config register. */
|
|
#define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
|
|
#define BIGMAC_RXCFG_FIFO 0x0000000e /* Default rx fthresh... */
|
|
#define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
|
|
#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
|
|
#define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */
|
|
#define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
|
|
#define BIGMAC_RXCFG_ME 0x00000200 /* Receive packets addressed to me */
|
|
#define BIGMAC_RXCFG_PGRP 0x00000400 /* Enable promisc group mode */
|
|
#define BIGMAC_RXCFG_HENABLE 0x00000800 /* Enable the hash filter */
|
|
#define BIGMAC_RXCFG_AENABLE 0x00001000 /* Enable the address filter */
|
|
|
|
/* The BigMAC PHY transceiver. Not nearly as sophisticated as the happy meal
|
|
* one. But it does have the "bit banger", oh baby.
|
|
*/
|
|
#define TCVR_TPAL 0x00UL
|
|
#define TCVR_MPAL 0x04UL
|
|
#define TCVR_REG_SIZE 0x08UL
|
|
|
|
/* Frame commands. */
|
|
#define FRAME_WRITE 0x50020000
|
|
#define FRAME_READ 0x60020000
|
|
|
|
/* Tranceiver registers. */
|
|
#define TCVR_PAL_SERIAL 0x00000001 /* Enable serial mode */
|
|
#define TCVR_PAL_EXTLBACK 0x00000002 /* Enable external loopback */
|
|
#define TCVR_PAL_MSENSE 0x00000004 /* Media sense */
|
|
#define TCVR_PAL_LTENABLE 0x00000008 /* Link test enable */
|
|
#define TCVR_PAL_LTSTATUS 0x00000010 /* Link test status (P1 only) */
|
|
|
|
/* Management PAL. */
|
|
#define MGMT_PAL_DCLOCK 0x00000001 /* Data clock */
|
|
#define MGMT_PAL_OENAB 0x00000002 /* Output enabler */
|
|
#define MGMT_PAL_MDIO 0x00000004 /* MDIO Data/attached */
|
|
#define MGMT_PAL_TIMEO 0x00000008 /* Transmit enable timeout error */
|
|
#define MGMT_PAL_EXT_MDIO MGMT_PAL_MDIO
|
|
#define MGMT_PAL_INT_MDIO MGMT_PAL_TIMEO
|
|
|
|
/* Here are some PHY addresses. */
|
|
#define BIGMAC_PHY_EXTERNAL 0 /* External transceiver */
|
|
#define BIGMAC_PHY_INTERNAL 1 /* Internal transceiver */
|
|
|
|
/* Ring descriptors and such, same as Quad Ethernet. */
|
|
struct be_rxd {
|
|
u32 rx_flags;
|
|
u32 rx_addr;
|
|
};
|
|
|
|
#define RXD_OWN 0x80000000 /* Ownership. */
|
|
#define RXD_UPDATE 0x10000000 /* Being Updated? */
|
|
#define RXD_LENGTH 0x000007ff /* Packet Length. */
|
|
|
|
struct be_txd {
|
|
u32 tx_flags;
|
|
u32 tx_addr;
|
|
};
|
|
|
|
#define TXD_OWN 0x80000000 /* Ownership. */
|
|
#define TXD_SOP 0x40000000 /* Start Of Packet */
|
|
#define TXD_EOP 0x20000000 /* End Of Packet */
|
|
#define TXD_UPDATE 0x10000000 /* Being Updated? */
|
|
#define TXD_LENGTH 0x000007ff /* Packet Length. */
|
|
|
|
#define TX_RING_MAXSIZE 256
|
|
#define RX_RING_MAXSIZE 256
|
|
|
|
#define TX_RING_SIZE 256
|
|
#define RX_RING_SIZE 256
|
|
|
|
#define NEXT_RX(num) (((num) + 1) & (RX_RING_SIZE - 1))
|
|
#define NEXT_TX(num) (((num) + 1) & (TX_RING_SIZE - 1))
|
|
#define PREV_RX(num) (((num) - 1) & (RX_RING_SIZE - 1))
|
|
#define PREV_TX(num) (((num) - 1) & (TX_RING_SIZE - 1))
|
|
|
|
#define TX_BUFFS_AVAIL(bp) \
|
|
(((bp)->tx_old <= (bp)->tx_new) ? \
|
|
(bp)->tx_old + (TX_RING_SIZE - 1) - (bp)->tx_new : \
|
|
(bp)->tx_old - (bp)->tx_new - 1)
|
|
|
|
|
|
#define RX_COPY_THRESHOLD 256
|
|
#define RX_BUF_ALLOC_SIZE (ETH_FRAME_LEN + (64 * 3))
|
|
|
|
struct bmac_init_block {
|
|
struct be_rxd be_rxd[RX_RING_MAXSIZE];
|
|
struct be_txd be_txd[TX_RING_MAXSIZE];
|
|
};
|
|
|
|
#define bib_offset(mem, elem) \
|
|
((__u32)((unsigned long)(&(((struct bmac_init_block *)0)->mem[elem]))))
|
|
|
|
/* Now software state stuff. */
|
|
enum bigmac_transceiver {
|
|
external = 0,
|
|
internal = 1,
|
|
none = 2,
|
|
};
|
|
|
|
/* Timer state engine. */
|
|
enum bigmac_timer_state {
|
|
ltrywait = 1, /* Forcing try of all modes, from fastest to slowest. */
|
|
asleep = 2, /* Timer inactive. */
|
|
};
|
|
|
|
struct bigmac {
|
|
void __iomem *gregs; /* QEC Global Registers */
|
|
void __iomem *creg; /* QEC BigMAC Channel Registers */
|
|
void __iomem *bregs; /* BigMAC Registers */
|
|
void __iomem *tregs; /* BigMAC Transceiver */
|
|
struct bmac_init_block *bmac_block; /* RX and TX descriptors */
|
|
dma_addr_t bblock_dvma; /* RX and TX descriptors */
|
|
|
|
spinlock_t lock;
|
|
|
|
struct sk_buff *rx_skbs[RX_RING_SIZE];
|
|
struct sk_buff *tx_skbs[TX_RING_SIZE];
|
|
|
|
int rx_new, tx_new, rx_old, tx_old;
|
|
|
|
int board_rev; /* BigMAC board revision. */
|
|
|
|
enum bigmac_transceiver tcvr_type;
|
|
unsigned int bigmac_bursts;
|
|
unsigned int paddr;
|
|
unsigned short sw_bmsr; /* SW copy of PHY BMSR */
|
|
unsigned short sw_bmcr; /* SW copy of PHY BMCR */
|
|
struct timer_list bigmac_timer;
|
|
enum bigmac_timer_state timer_state;
|
|
unsigned int timer_ticks;
|
|
|
|
struct platform_device *qec_op;
|
|
struct platform_device *bigmac_op;
|
|
struct net_device *dev;
|
|
};
|
|
|
|
/* We use this to acquire receive skb's that we can DMA directly into. */
|
|
#define ALIGNED_RX_SKB_ADDR(addr) \
|
|
((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr))
|
|
|
|
static inline struct sk_buff *big_mac_alloc_skb(unsigned int length, gfp_t gfp_flags)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
skb = alloc_skb(length + 64, gfp_flags);
|
|
if(skb) {
|
|
int offset = ALIGNED_RX_SKB_ADDR(skb->data);
|
|
|
|
if(offset)
|
|
skb_reserve(skb, offset);
|
|
}
|
|
return skb;
|
|
}
|
|
|
|
#endif /* !(_SUNBMAC_H) */
|