forked from Minki/linux
b8c7428af0
set_irq_trigger_mode() is not needed on all platforms so remove it and move the related source code to mach_init_irq(). This will allow gdium to share the common irq.c without adding an empty set_irq_trigger_mode(). Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1493/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
132 lines
3.3 KiB
C
132 lines
3.3 KiB
C
/*
|
|
* Copyright (C) 2007 Lemote Inc.
|
|
* Author: Fuxin Zhang, zhangfx@lemote.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/irq_cpu.h>
|
|
#include <asm/i8259.h>
|
|
#include <asm/mipsregs.h>
|
|
|
|
#include <loongson.h>
|
|
#include <machine.h>
|
|
|
|
#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
|
|
#define LOONGSON_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
|
|
#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */
|
|
#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */
|
|
#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */
|
|
|
|
#define LOONGSON_INT_BIT_INT0 (1 << 11)
|
|
#define LOONGSON_INT_BIT_INT1 (1 << 12)
|
|
|
|
/*
|
|
* The generic i8259_irq() make the kernel hang on booting. Since we cannot
|
|
* get the irq via the IRR directly, we access the ISR instead.
|
|
*/
|
|
int mach_i8259_irq(void)
|
|
{
|
|
int irq, isr;
|
|
|
|
irq = -1;
|
|
|
|
if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
|
|
raw_spin_lock(&i8259A_lock);
|
|
isr = inb(PIC_MASTER_CMD) &
|
|
~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR);
|
|
if (!isr)
|
|
isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8;
|
|
irq = ffs(isr) - 1;
|
|
if (unlikely(irq == 7)) {
|
|
/*
|
|
* This may be a spurious interrupt.
|
|
*
|
|
* Read the interrupt status register (ISR). If the most
|
|
* significant bit is not set then there is no valid
|
|
* interrupt.
|
|
*/
|
|
outb(0x0B, PIC_MASTER_ISR); /* ISR register */
|
|
if (~inb(PIC_MASTER_ISR) & 0x80)
|
|
irq = -1;
|
|
}
|
|
raw_spin_unlock(&i8259A_lock);
|
|
}
|
|
|
|
return irq;
|
|
}
|
|
EXPORT_SYMBOL(mach_i8259_irq);
|
|
|
|
static void i8259_irqdispatch(void)
|
|
{
|
|
int irq;
|
|
|
|
irq = mach_i8259_irq();
|
|
if (irq >= 0)
|
|
do_IRQ(irq);
|
|
else
|
|
spurious_interrupt();
|
|
}
|
|
|
|
void mach_irq_dispatch(unsigned int pending)
|
|
{
|
|
if (pending & CAUSEF_IP7)
|
|
do_IRQ(LOONGSON_TIMER_IRQ);
|
|
else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */
|
|
#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
|
|
do_IRQ(LOONGSON2_PERFCNT_IRQ);
|
|
#endif
|
|
bonito_irqdispatch();
|
|
} else if (pending & CAUSEF_IP3) /* CPU UART */
|
|
do_IRQ(LOONGSON_UART_IRQ);
|
|
else if (pending & CAUSEF_IP2) /* South Bridge */
|
|
i8259_irqdispatch();
|
|
else
|
|
spurious_interrupt();
|
|
}
|
|
|
|
static irqreturn_t ip6_action(int cpl, void *dev_id)
|
|
{
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
struct irqaction ip6_irqaction = {
|
|
.handler = ip6_action,
|
|
.name = "cascade",
|
|
.flags = IRQF_SHARED,
|
|
};
|
|
|
|
struct irqaction cascade_irqaction = {
|
|
.handler = no_action,
|
|
.name = "cascade",
|
|
};
|
|
|
|
void __init mach_init_irq(void)
|
|
{
|
|
/* init all controller
|
|
* 0-15 ------> i8259 interrupt
|
|
* 16-23 ------> mips cpu interrupt
|
|
* 32-63 ------> bonito irq
|
|
*/
|
|
|
|
/* setup cs5536 as high level trigger */
|
|
LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
|
|
LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
|
|
|
|
/* Sets the first-level interrupt dispatcher. */
|
|
mips_cpu_irq_init();
|
|
init_i8259_irqs();
|
|
bonito_irq_init();
|
|
|
|
/* setup north bridge irq (bonito) */
|
|
setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
|
|
/* setup source bridge irq (i8259) */
|
|
setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
|
|
}
|