linux/arch/arm/boot/dts/omap3-n900.dts

/*
 * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
 * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 (or later) as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "omap34xx.dtsi"

/ {
	model = "Nokia N900";
	compatible = "nokia,omap3-n900", "ti,omap3";

	cpus {
		cpu@0 {
			cpu0-supply = <&vcc>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	gpio_keys {
		compatible = "gpio-keys";

		camera_lens_cover {
			label = "Camera Lens Cover";
			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
			gpio-key,wakeup;
		};

		camera_focus {
			label = "Camera Focus";
			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
			gpio-key,wakeup;
		};

		camera_capture {
			label = "Camera Capture";
			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
			linux,code = <0xd4>; /* KEY_CAMERA */
			gpio-key,wakeup;
		};

		lock_button {
			label = "Lock Button";
			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
			linux,code = <0x98>; /* KEY_SCREENLOCK */
			gpio-key,wakeup;
		};

		keypad_slide {
			label = "Keypad Slide";
			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
			gpio-key,wakeup;
		};

		proximity_sensor {
			label = "Proximity Sensor";
			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
			linux,input-type = <5>; /* EV_SW */
			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
		};
	};

};

&omap3_pmx_core {
	pinctrl-names = "default";

	uart2_pins: pinmux_uart2_pins {
		pinctrl-single,pins = <
			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
		>;
	};

	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
		>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <2200000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
		interrupt-parent = <&intc>;
	};
};

#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"

&twl {
	twl_audio: audio {
		compatible = "ti,twl4030-audio";
		ti,enable-vibra = <1>;
	};
};

&twl_gpio {
	ti,pullups	= <0x0>;
	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <100000>;

	bq27200: bq27200@55 {
		compatible = "ti,bq27200";
		reg = <0x55>;
	};
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&vmmc1>;
	bus-width = <4>;
	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};

&mmc2 {
	status = "disabled";
};

&mmc3 {
	status = "disabled";
};

&mcspi1 {
	/*
	 * For some reason, touchscreen is necessary for screen to work at
	 * all on real hw. It works well without it on emulator.
	 *
	 * Also... order in the device tree actually matters here.
	 */
	tsc2005@0 {
		compatible = "tsc2005";
		spi-max-frequency = <6000000>;
		reg = <0>;
	};
	mipid@2 {
		compatible = "acx565akm";
		spi-max-frequency = <6000000>;
		reg = <2>;
	};
};

&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <2>;
	power = <50>;
};

&uart1 {
	status = "disabled";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
};