forked from Minki/linux
fac3274c4e
All dvo drivers only support 2 dpms states, and our dvo driver even switches of the dvo port for anything else than DPMS_ON. Hence ditch this complexity and simply use bool enable. While reading through this code I've noticed that the mode_set function of ch7017 is a bit peculiar - it disable the lvds again, even though the crtc helper code should have done that ... This might be to work around an issue at driver load, we pretty much ignore the hw state when taking over. v2: Also do the conversion for the new ns2501 driver. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
305 lines
7.7 KiB
C
305 lines
7.7 KiB
C
/*
|
|
* Copyright © 2007 Dave Mueller
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Dave Mueller <dave.mueller@gmx.ch>
|
|
*
|
|
*/
|
|
|
|
#include "dvo.h"
|
|
|
|
/* register definitions according to the TFP410 data sheet */
|
|
#define TFP410_VID 0x014C
|
|
#define TFP410_DID 0x0410
|
|
|
|
#define TFP410_VID_LO 0x00
|
|
#define TFP410_VID_HI 0x01
|
|
#define TFP410_DID_LO 0x02
|
|
#define TFP410_DID_HI 0x03
|
|
#define TFP410_REV 0x04
|
|
|
|
#define TFP410_CTL_1 0x08
|
|
#define TFP410_CTL_1_TDIS (1<<6)
|
|
#define TFP410_CTL_1_VEN (1<<5)
|
|
#define TFP410_CTL_1_HEN (1<<4)
|
|
#define TFP410_CTL_1_DSEL (1<<3)
|
|
#define TFP410_CTL_1_BSEL (1<<2)
|
|
#define TFP410_CTL_1_EDGE (1<<1)
|
|
#define TFP410_CTL_1_PD (1<<0)
|
|
|
|
#define TFP410_CTL_2 0x09
|
|
#define TFP410_CTL_2_VLOW (1<<7)
|
|
#define TFP410_CTL_2_MSEL_MASK (0x7<<4)
|
|
#define TFP410_CTL_2_MSEL (1<<4)
|
|
#define TFP410_CTL_2_TSEL (1<<3)
|
|
#define TFP410_CTL_2_RSEN (1<<2)
|
|
#define TFP410_CTL_2_HTPLG (1<<1)
|
|
#define TFP410_CTL_2_MDI (1<<0)
|
|
|
|
#define TFP410_CTL_3 0x0A
|
|
#define TFP410_CTL_3_DK_MASK (0x7<<5)
|
|
#define TFP410_CTL_3_DK (1<<5)
|
|
#define TFP410_CTL_3_DKEN (1<<4)
|
|
#define TFP410_CTL_3_CTL_MASK (0x7<<1)
|
|
#define TFP410_CTL_3_CTL (1<<1)
|
|
|
|
#define TFP410_USERCFG 0x0B
|
|
|
|
#define TFP410_DE_DLY 0x32
|
|
|
|
#define TFP410_DE_CTL 0x33
|
|
#define TFP410_DE_CTL_DEGEN (1<<6)
|
|
#define TFP410_DE_CTL_VSPOL (1<<5)
|
|
#define TFP410_DE_CTL_HSPOL (1<<4)
|
|
#define TFP410_DE_CTL_DEDLY8 (1<<0)
|
|
|
|
#define TFP410_DE_TOP 0x34
|
|
|
|
#define TFP410_DE_CNT_LO 0x36
|
|
#define TFP410_DE_CNT_HI 0x37
|
|
|
|
#define TFP410_DE_LIN_LO 0x38
|
|
#define TFP410_DE_LIN_HI 0x39
|
|
|
|
#define TFP410_H_RES_LO 0x3A
|
|
#define TFP410_H_RES_HI 0x3B
|
|
|
|
#define TFP410_V_RES_LO 0x3C
|
|
#define TFP410_V_RES_HI 0x3D
|
|
|
|
struct tfp410_priv {
|
|
bool quiet;
|
|
};
|
|
|
|
static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
|
|
{
|
|
struct tfp410_priv *tfp = dvo->dev_priv;
|
|
struct i2c_adapter *adapter = dvo->i2c_bus;
|
|
u8 out_buf[2];
|
|
u8 in_buf[2];
|
|
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.addr = dvo->slave_addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = out_buf,
|
|
},
|
|
{
|
|
.addr = dvo->slave_addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = in_buf,
|
|
}
|
|
};
|
|
|
|
out_buf[0] = addr;
|
|
out_buf[1] = 0;
|
|
|
|
if (i2c_transfer(adapter, msgs, 2) == 2) {
|
|
*ch = in_buf[0];
|
|
return true;
|
|
};
|
|
|
|
if (!tfp->quiet) {
|
|
DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n",
|
|
addr, adapter->name, dvo->slave_addr);
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
|
|
{
|
|
struct tfp410_priv *tfp = dvo->dev_priv;
|
|
struct i2c_adapter *adapter = dvo->i2c_bus;
|
|
uint8_t out_buf[2];
|
|
struct i2c_msg msg = {
|
|
.addr = dvo->slave_addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = out_buf,
|
|
};
|
|
|
|
out_buf[0] = addr;
|
|
out_buf[1] = ch;
|
|
|
|
if (i2c_transfer(adapter, &msg, 1) == 1)
|
|
return true;
|
|
|
|
if (!tfp->quiet) {
|
|
DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
|
|
addr, adapter->name, dvo->slave_addr);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int tfp410_getid(struct intel_dvo_device *dvo, int addr)
|
|
{
|
|
uint8_t ch1, ch2;
|
|
|
|
if (tfp410_readb(dvo, addr+0, &ch1) &&
|
|
tfp410_readb(dvo, addr+1, &ch2))
|
|
return ((ch2 << 8) & 0xFF00) | (ch1 & 0x00FF);
|
|
|
|
return -1;
|
|
}
|
|
|
|
/* Ti TFP410 driver for chip on i2c bus */
|
|
static bool tfp410_init(struct intel_dvo_device *dvo,
|
|
struct i2c_adapter *adapter)
|
|
{
|
|
/* this will detect the tfp410 chip on the specified i2c bus */
|
|
struct tfp410_priv *tfp;
|
|
int id;
|
|
|
|
tfp = kzalloc(sizeof(struct tfp410_priv), GFP_KERNEL);
|
|
if (tfp == NULL)
|
|
return false;
|
|
|
|
dvo->i2c_bus = adapter;
|
|
dvo->dev_priv = tfp;
|
|
tfp->quiet = true;
|
|
|
|
if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
|
|
DRM_DEBUG_KMS("tfp410 not detected got VID %X: from %s "
|
|
"Slave %d.\n",
|
|
id, adapter->name, dvo->slave_addr);
|
|
goto out;
|
|
}
|
|
|
|
if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
|
|
DRM_DEBUG_KMS("tfp410 not detected got DID %X: from %s "
|
|
"Slave %d.\n",
|
|
id, adapter->name, dvo->slave_addr);
|
|
goto out;
|
|
}
|
|
tfp->quiet = false;
|
|
return true;
|
|
out:
|
|
kfree(tfp);
|
|
return false;
|
|
}
|
|
|
|
static enum drm_connector_status tfp410_detect(struct intel_dvo_device *dvo)
|
|
{
|
|
enum drm_connector_status ret = connector_status_disconnected;
|
|
uint8_t ctl2;
|
|
|
|
if (tfp410_readb(dvo, TFP410_CTL_2, &ctl2)) {
|
|
if (ctl2 & TFP410_CTL_2_RSEN)
|
|
ret = connector_status_connected;
|
|
else
|
|
ret = connector_status_disconnected;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum drm_mode_status tfp410_mode_valid(struct intel_dvo_device *dvo,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
return MODE_OK;
|
|
}
|
|
|
|
static void tfp410_mode_set(struct intel_dvo_device *dvo,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
/* As long as the basics are set up, since we don't have clock dependencies
|
|
* in the mode setup, we can just leave the registers alone and everything
|
|
* will work fine.
|
|
*/
|
|
/* don't do much */
|
|
return;
|
|
}
|
|
|
|
/* set the tfp410 power state */
|
|
static void tfp410_dpms(struct intel_dvo_device *dvo, bool enable)
|
|
{
|
|
uint8_t ctl1;
|
|
|
|
if (!tfp410_readb(dvo, TFP410_CTL_1, &ctl1))
|
|
return;
|
|
|
|
if (enable)
|
|
ctl1 |= TFP410_CTL_1_PD;
|
|
else
|
|
ctl1 &= ~TFP410_CTL_1_PD;
|
|
|
|
tfp410_writeb(dvo, TFP410_CTL_1, ctl1);
|
|
}
|
|
|
|
static void tfp410_dump_regs(struct intel_dvo_device *dvo)
|
|
{
|
|
uint8_t val, val2;
|
|
|
|
tfp410_readb(dvo, TFP410_REV, &val);
|
|
DRM_LOG_KMS("TFP410_REV: 0x%02X\n", val);
|
|
tfp410_readb(dvo, TFP410_CTL_1, &val);
|
|
DRM_LOG_KMS("TFP410_CTL1: 0x%02X\n", val);
|
|
tfp410_readb(dvo, TFP410_CTL_2, &val);
|
|
DRM_LOG_KMS("TFP410_CTL2: 0x%02X\n", val);
|
|
tfp410_readb(dvo, TFP410_CTL_3, &val);
|
|
DRM_LOG_KMS("TFP410_CTL3: 0x%02X\n", val);
|
|
tfp410_readb(dvo, TFP410_USERCFG, &val);
|
|
DRM_LOG_KMS("TFP410_USERCFG: 0x%02X\n", val);
|
|
tfp410_readb(dvo, TFP410_DE_DLY, &val);
|
|
DRM_LOG_KMS("TFP410_DE_DLY: 0x%02X\n", val);
|
|
tfp410_readb(dvo, TFP410_DE_CTL, &val);
|
|
DRM_LOG_KMS("TFP410_DE_CTL: 0x%02X\n", val);
|
|
tfp410_readb(dvo, TFP410_DE_TOP, &val);
|
|
DRM_LOG_KMS("TFP410_DE_TOP: 0x%02X\n", val);
|
|
tfp410_readb(dvo, TFP410_DE_CNT_LO, &val);
|
|
tfp410_readb(dvo, TFP410_DE_CNT_HI, &val2);
|
|
DRM_LOG_KMS("TFP410_DE_CNT: 0x%02X%02X\n", val2, val);
|
|
tfp410_readb(dvo, TFP410_DE_LIN_LO, &val);
|
|
tfp410_readb(dvo, TFP410_DE_LIN_HI, &val2);
|
|
DRM_LOG_KMS("TFP410_DE_LIN: 0x%02X%02X\n", val2, val);
|
|
tfp410_readb(dvo, TFP410_H_RES_LO, &val);
|
|
tfp410_readb(dvo, TFP410_H_RES_HI, &val2);
|
|
DRM_LOG_KMS("TFP410_H_RES: 0x%02X%02X\n", val2, val);
|
|
tfp410_readb(dvo, TFP410_V_RES_LO, &val);
|
|
tfp410_readb(dvo, TFP410_V_RES_HI, &val2);
|
|
DRM_LOG_KMS("TFP410_V_RES: 0x%02X%02X\n", val2, val);
|
|
}
|
|
|
|
static void tfp410_destroy(struct intel_dvo_device *dvo)
|
|
{
|
|
struct tfp410_priv *tfp = dvo->dev_priv;
|
|
|
|
if (tfp) {
|
|
kfree(tfp);
|
|
dvo->dev_priv = NULL;
|
|
}
|
|
}
|
|
|
|
struct intel_dvo_dev_ops tfp410_ops = {
|
|
.init = tfp410_init,
|
|
.detect = tfp410_detect,
|
|
.mode_valid = tfp410_mode_valid,
|
|
.mode_set = tfp410_mode_set,
|
|
.dpms = tfp410_dpms,
|
|
.dump_regs = tfp410_dump_regs,
|
|
.destroy = tfp410_destroy,
|
|
};
|