forked from Minki/linux
18aecc2b64
This support was partially present in the existing code (look for "__tilegx__" ifdefs) but with this change you can build a working kernel using the TILE-Gx toolchain and ARCH=tilegx. Most of these files are new, generally adding a foo_64.c file where previously there was just a foo_32.c file. The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx, using the existing SRCARCH mechanism in the top-level Makefile. Changes to existing files: - <asm/bitops.h> and <asm/bitops_32.h> changed to factor the include of <asm-generic/bitops/non-atomic.h> in the common header. - <asm/compat.h> and arch/tile/kernel/compat.c changed to remove the "const" markers I had put on compat_sys_execve() when trying to match some recent similar changes to the non-compat execve. It turns out the compat version wasn't "upgraded" to use const. - <asm/opcode-tile_64.h> and <asm/opcode_constants_64.h> were previously included accidentally, with the 32-bit contents. Now they have the proper 64-bit contents. Finally, I had to hack the existing hacky drivers/input/input-compat.h to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [drivers/input]
197 lines
5.7 KiB
ArmAsm
197 lines
5.7 KiB
ArmAsm
/*
|
|
* Copyright 2011 Tilera Corporation. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation, version 2.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/cache.h>
|
|
#include <arch/chip.h>
|
|
|
|
/* Access user memory, but use MMU to avoid propagating kernel exceptions. */
|
|
|
|
.pushsection .fixup,"ax"
|
|
|
|
get_user_fault:
|
|
{ movei r1, -EFAULT; move r0, zero }
|
|
jrp lr
|
|
ENDPROC(get_user_fault)
|
|
|
|
put_user_fault:
|
|
{ movei r0, -EFAULT; jrp lr }
|
|
ENDPROC(put_user_fault)
|
|
|
|
.popsection
|
|
|
|
/*
|
|
* __get_user_N functions take a pointer in r0, and return 0 in r1
|
|
* on success, with the value in r0; or else -EFAULT in r1.
|
|
*/
|
|
#define __get_user_N(bytes, LOAD) \
|
|
STD_ENTRY(__get_user_##bytes); \
|
|
1: { LOAD r0, r0; move r1, zero }; \
|
|
jrp lr; \
|
|
STD_ENDPROC(__get_user_##bytes); \
|
|
.pushsection __ex_table,"a"; \
|
|
.quad 1b, get_user_fault; \
|
|
.popsection
|
|
|
|
__get_user_N(1, ld1u)
|
|
__get_user_N(2, ld2u)
|
|
__get_user_N(4, ld4u)
|
|
__get_user_N(8, ld)
|
|
|
|
/*
|
|
* __put_user_N functions take a value in r0 and a pointer in r1,
|
|
* and return 0 in r0 on success or -EFAULT on failure.
|
|
*/
|
|
#define __put_user_N(bytes, STORE) \
|
|
STD_ENTRY(__put_user_##bytes); \
|
|
1: { STORE r1, r0; move r0, zero }; \
|
|
jrp lr; \
|
|
STD_ENDPROC(__put_user_##bytes); \
|
|
.pushsection __ex_table,"a"; \
|
|
.quad 1b, put_user_fault; \
|
|
.popsection
|
|
|
|
__put_user_N(1, st1)
|
|
__put_user_N(2, st2)
|
|
__put_user_N(4, st4)
|
|
__put_user_N(8, st)
|
|
|
|
/*
|
|
* strnlen_user_asm takes the pointer in r0, and the length bound in r1.
|
|
* It returns the length, including the terminating NUL, or zero on exception.
|
|
* If length is greater than the bound, returns one plus the bound.
|
|
*/
|
|
STD_ENTRY(strnlen_user_asm)
|
|
{ beqz r1, 2f; addi r3, r0, -1 } /* bias down to include NUL */
|
|
1: { ld1u r4, r0; addi r1, r1, -1 }
|
|
beqz r4, 2f
|
|
{ bnezt r1, 1b; addi r0, r0, 1 }
|
|
2: { sub r0, r0, r3; jrp lr }
|
|
STD_ENDPROC(strnlen_user_asm)
|
|
.pushsection .fixup,"ax"
|
|
strnlen_user_fault:
|
|
{ move r0, zero; jrp lr }
|
|
ENDPROC(strnlen_user_fault)
|
|
.section __ex_table,"a"
|
|
.quad 1b, strnlen_user_fault
|
|
.popsection
|
|
|
|
/*
|
|
* strncpy_from_user_asm takes the kernel target pointer in r0,
|
|
* the userspace source pointer in r1, and the length bound (including
|
|
* the trailing NUL) in r2. On success, it returns the string length
|
|
* (not including the trailing NUL), or -EFAULT on failure.
|
|
*/
|
|
STD_ENTRY(strncpy_from_user_asm)
|
|
{ beqz r2, 2f; move r3, r0 }
|
|
1: { ld1u r4, r1; addi r1, r1, 1; addi r2, r2, -1 }
|
|
{ st1 r0, r4; addi r0, r0, 1 }
|
|
beqz r2, 2f
|
|
bnezt r4, 1b
|
|
addi r0, r0, -1 /* don't count the trailing NUL */
|
|
2: { sub r0, r0, r3; jrp lr }
|
|
STD_ENDPROC(strncpy_from_user_asm)
|
|
.pushsection .fixup,"ax"
|
|
strncpy_from_user_fault:
|
|
{ movei r0, -EFAULT; jrp lr }
|
|
ENDPROC(strncpy_from_user_fault)
|
|
.section __ex_table,"a"
|
|
.quad 1b, strncpy_from_user_fault
|
|
.popsection
|
|
|
|
/*
|
|
* clear_user_asm takes the user target address in r0 and the
|
|
* number of bytes to zero in r1.
|
|
* It returns the number of uncopiable bytes (hopefully zero) in r0.
|
|
* Note that we don't use a separate .fixup section here since we fall
|
|
* through into the "fixup" code as the last straight-line bundle anyway.
|
|
*/
|
|
STD_ENTRY(clear_user_asm)
|
|
{ beqz r1, 2f; or r2, r0, r1 }
|
|
andi r2, r2, 7
|
|
beqzt r2, .Lclear_aligned_user_asm
|
|
1: { st1 r0, zero; addi r0, r0, 1; addi r1, r1, -1 }
|
|
bnezt r1, 1b
|
|
2: { move r0, r1; jrp lr }
|
|
.pushsection __ex_table,"a"
|
|
.quad 1b, 2b
|
|
.popsection
|
|
|
|
.Lclear_aligned_user_asm:
|
|
1: { st r0, zero; addi r0, r0, 8; addi r1, r1, -8 }
|
|
bnezt r1, 1b
|
|
2: { move r0, r1; jrp lr }
|
|
STD_ENDPROC(clear_user_asm)
|
|
.pushsection __ex_table,"a"
|
|
.quad 1b, 2b
|
|
.popsection
|
|
|
|
/*
|
|
* flush_user_asm takes the user target address in r0 and the
|
|
* number of bytes to flush in r1.
|
|
* It returns the number of unflushable bytes (hopefully zero) in r0.
|
|
*/
|
|
STD_ENTRY(flush_user_asm)
|
|
beqz r1, 2f
|
|
{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
|
|
{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
|
|
{ and r0, r0, r2; and r1, r1, r2 }
|
|
{ sub r1, r1, r0 }
|
|
1: { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() }
|
|
{ addi r0, r0, CHIP_FLUSH_STRIDE(); bnezt r1, 1b }
|
|
2: { move r0, r1; jrp lr }
|
|
STD_ENDPROC(flush_user_asm)
|
|
.pushsection __ex_table,"a"
|
|
.quad 1b, 2b
|
|
.popsection
|
|
|
|
/*
|
|
* inv_user_asm takes the user target address in r0 and the
|
|
* number of bytes to invalidate in r1.
|
|
* It returns the number of not inv'able bytes (hopefully zero) in r0.
|
|
*/
|
|
STD_ENTRY(inv_user_asm)
|
|
beqz r1, 2f
|
|
{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
|
|
{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
|
|
{ and r0, r0, r2; and r1, r1, r2 }
|
|
{ sub r1, r1, r0 }
|
|
1: { inv r0; addi r1, r1, -CHIP_INV_STRIDE() }
|
|
{ addi r0, r0, CHIP_INV_STRIDE(); bnezt r1, 1b }
|
|
2: { move r0, r1; jrp lr }
|
|
STD_ENDPROC(inv_user_asm)
|
|
.pushsection __ex_table,"a"
|
|
.quad 1b, 2b
|
|
.popsection
|
|
|
|
/*
|
|
* finv_user_asm takes the user target address in r0 and the
|
|
* number of bytes to flush-invalidate in r1.
|
|
* It returns the number of not finv'able bytes (hopefully zero) in r0.
|
|
*/
|
|
STD_ENTRY(finv_user_asm)
|
|
beqz r1, 2f
|
|
{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
|
|
{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
|
|
{ and r0, r0, r2; and r1, r1, r2 }
|
|
{ sub r1, r1, r0 }
|
|
1: { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() }
|
|
{ addi r0, r0, CHIP_FINV_STRIDE(); bnezt r1, 1b }
|
|
2: { move r0, r1; jrp lr }
|
|
STD_ENDPROC(finv_user_asm)
|
|
.pushsection __ex_table,"a"
|
|
.quad 1b, 2b
|
|
.popsection
|