forked from Minki/linux
b7258a4aba
The former is way to generic for a global symbol. Fixes this build error: drivers/usb/built-in.o: In function `.handle_event': (.text+0x67dd0): multiple definition of `.handle_event' drivers/pcmcia/built-in.o:(.text+0xcfcc): first defined here drivers/usb/built-in.o: In function `handle_event': (.opd+0x5bc8): multiple definition of `handle_event' drivers/pcmcia/built-in.o:(.opd+0xed0): first defined here Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1151 lines
40 KiB
C
1151 lines
40 KiB
C
/*
|
|
* xHCI host controller driver
|
|
*
|
|
* Copyright (C) 2008 Intel Corp.
|
|
*
|
|
* Author: Sarah Sharp
|
|
* Some code borrowed from the Linux EHCI driver.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef __LINUX_XHCI_HCD_H
|
|
#define __LINUX_XHCI_HCD_H
|
|
|
|
#include <linux/usb.h>
|
|
#include <linux/timer.h>
|
|
|
|
#include "../core/hcd.h"
|
|
/* Code sharing between pci-quirks and xhci hcd */
|
|
#include "xhci-ext-caps.h"
|
|
|
|
/* xHCI PCI Configuration Registers */
|
|
#define XHCI_SBRN_OFFSET (0x60)
|
|
|
|
/* Max number of USB devices for any host controller - limit in section 6.1 */
|
|
#define MAX_HC_SLOTS 256
|
|
/* Section 5.3.3 - MaxPorts */
|
|
#define MAX_HC_PORTS 127
|
|
|
|
/*
|
|
* xHCI register interface.
|
|
* This corresponds to the eXtensible Host Controller Interface (xHCI)
|
|
* Revision 0.95 specification
|
|
*
|
|
* Registers should always be accessed with double word or quad word accesses.
|
|
*
|
|
* Some xHCI implementations may support 64-bit address pointers. Registers
|
|
* with 64-bit address pointers should be written to with dword accesses by
|
|
* writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
|
|
* xHCI implementations that do not support 64-bit address pointers will ignore
|
|
* the high dword, and write order is irrelevant.
|
|
*/
|
|
|
|
/**
|
|
* struct xhci_cap_regs - xHCI Host Controller Capability Registers.
|
|
* @hc_capbase: length of the capabilities register and HC version number
|
|
* @hcs_params1: HCSPARAMS1 - Structural Parameters 1
|
|
* @hcs_params2: HCSPARAMS2 - Structural Parameters 2
|
|
* @hcs_params3: HCSPARAMS3 - Structural Parameters 3
|
|
* @hcc_params: HCCPARAMS - Capability Parameters
|
|
* @db_off: DBOFF - Doorbell array offset
|
|
* @run_regs_off: RTSOFF - Runtime register space offset
|
|
*/
|
|
struct xhci_cap_regs {
|
|
u32 hc_capbase;
|
|
u32 hcs_params1;
|
|
u32 hcs_params2;
|
|
u32 hcs_params3;
|
|
u32 hcc_params;
|
|
u32 db_off;
|
|
u32 run_regs_off;
|
|
/* Reserved up to (CAPLENGTH - 0x1C) */
|
|
} __attribute__ ((packed));
|
|
|
|
/* hc_capbase bitmasks */
|
|
/* bits 7:0 - how long is the Capabilities register */
|
|
#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
|
|
/* bits 31:16 */
|
|
#define HC_VERSION(p) (((p) >> 16) & 0xffff)
|
|
|
|
/* HCSPARAMS1 - hcs_params1 - bitmasks */
|
|
/* bits 0:7, Max Device Slots */
|
|
#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
|
|
#define HCS_SLOTS_MASK 0xff
|
|
/* bits 8:18, Max Interrupters */
|
|
#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
|
|
/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
|
|
#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
|
|
|
|
/* HCSPARAMS2 - hcs_params2 - bitmasks */
|
|
/* bits 0:3, frames or uframes that SW needs to queue transactions
|
|
* ahead of the HW to meet periodic deadlines */
|
|
#define HCS_IST(p) (((p) >> 0) & 0xf)
|
|
/* bits 4:7, max number of Event Ring segments */
|
|
#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
|
|
/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
|
|
/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
|
|
|
|
/* HCSPARAMS3 - hcs_params3 - bitmasks */
|
|
/* bits 0:7, Max U1 to U0 latency for the roothub ports */
|
|
#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
|
|
/* bits 16:31, Max U2 to U0 latency for the roothub ports */
|
|
#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
|
|
|
|
/* HCCPARAMS - hcc_params - bitmasks */
|
|
/* true: HC can use 64-bit address pointers */
|
|
#define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
|
|
/* true: HC can do bandwidth negotiation */
|
|
#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
|
|
/* true: HC uses 64-byte Device Context structures
|
|
* FIXME 64-byte context structures aren't supported yet.
|
|
*/
|
|
#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
|
|
/* true: HC has port power switches */
|
|
#define HCC_PPC(p) ((p) & (1 << 3))
|
|
/* true: HC has port indicators */
|
|
#define HCS_INDICATOR(p) ((p) & (1 << 4))
|
|
/* true: HC has Light HC Reset Capability */
|
|
#define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
|
|
/* true: HC supports latency tolerance messaging */
|
|
#define HCC_LTC(p) ((p) & (1 << 6))
|
|
/* true: no secondary Stream ID Support */
|
|
#define HCC_NSS(p) ((p) & (1 << 7))
|
|
/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
|
|
#define HCC_MAX_PSA (1 << ((((p) >> 12) & 0xf) + 1))
|
|
/* Extended Capabilities pointer from PCI base - section 5.3.6 */
|
|
#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
|
|
|
|
/* db_off bitmask - bits 0:1 reserved */
|
|
#define DBOFF_MASK (~0x3)
|
|
|
|
/* run_regs_off bitmask - bits 0:4 reserved */
|
|
#define RTSOFF_MASK (~0x1f)
|
|
|
|
|
|
/* Number of registers per port */
|
|
#define NUM_PORT_REGS 4
|
|
|
|
/**
|
|
* struct xhci_op_regs - xHCI Host Controller Operational Registers.
|
|
* @command: USBCMD - xHC command register
|
|
* @status: USBSTS - xHC status register
|
|
* @page_size: This indicates the page size that the host controller
|
|
* supports. If bit n is set, the HC supports a page size
|
|
* of 2^(n+12), up to a 128MB page size.
|
|
* 4K is the minimum page size.
|
|
* @cmd_ring: CRP - 64-bit Command Ring Pointer
|
|
* @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
|
|
* @config_reg: CONFIG - Configure Register
|
|
* @port_status_base: PORTSCn - base address for Port Status and Control
|
|
* Each port has a Port Status and Control register,
|
|
* followed by a Port Power Management Status and Control
|
|
* register, a Port Link Info register, and a reserved
|
|
* register.
|
|
* @port_power_base: PORTPMSCn - base address for
|
|
* Port Power Management Status and Control
|
|
* @port_link_base: PORTLIn - base address for Port Link Info (current
|
|
* Link PM state and control) for USB 2.1 and USB 3.0
|
|
* devices.
|
|
*/
|
|
struct xhci_op_regs {
|
|
u32 command;
|
|
u32 status;
|
|
u32 page_size;
|
|
u32 reserved1;
|
|
u32 reserved2;
|
|
u32 dev_notification;
|
|
u32 cmd_ring[2];
|
|
/* rsvd: offset 0x20-2F */
|
|
u32 reserved3[4];
|
|
u32 dcbaa_ptr[2];
|
|
u32 config_reg;
|
|
/* rsvd: offset 0x3C-3FF */
|
|
u32 reserved4[241];
|
|
/* port 1 registers, which serve as a base address for other ports */
|
|
u32 port_status_base;
|
|
u32 port_power_base;
|
|
u32 port_link_base;
|
|
u32 reserved5;
|
|
/* registers for ports 2-255 */
|
|
u32 reserved6[NUM_PORT_REGS*254];
|
|
} __attribute__ ((packed));
|
|
|
|
/* USBCMD - USB command - command bitmasks */
|
|
/* start/stop HC execution - do not write unless HC is halted*/
|
|
#define CMD_RUN XHCI_CMD_RUN
|
|
/* Reset HC - resets internal HC state machine and all registers (except
|
|
* PCI config regs). HC does NOT drive a USB reset on the downstream ports.
|
|
* The xHCI driver must reinitialize the xHC after setting this bit.
|
|
*/
|
|
#define CMD_RESET (1 << 1)
|
|
/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
|
|
#define CMD_EIE XHCI_CMD_EIE
|
|
/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
|
|
#define CMD_HSEIE XHCI_CMD_HSEIE
|
|
/* bits 4:6 are reserved (and should be preserved on writes). */
|
|
/* light reset (port status stays unchanged) - reset completed when this is 0 */
|
|
#define CMD_LRESET (1 << 7)
|
|
/* FIXME: ignoring host controller save/restore state for now. */
|
|
#define CMD_CSS (1 << 8)
|
|
#define CMD_CRS (1 << 9)
|
|
/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
|
|
#define CMD_EWE XHCI_CMD_EWE
|
|
/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
|
|
* hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
|
|
* '0' means the xHC can power it off if all ports are in the disconnect,
|
|
* disabled, or powered-off state.
|
|
*/
|
|
#define CMD_PM_INDEX (1 << 11)
|
|
/* bits 12:31 are reserved (and should be preserved on writes). */
|
|
|
|
/* USBSTS - USB status - status bitmasks */
|
|
/* HC not running - set to 1 when run/stop bit is cleared. */
|
|
#define STS_HALT XHCI_STS_HALT
|
|
/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
|
|
#define STS_FATAL (1 << 2)
|
|
/* event interrupt - clear this prior to clearing any IP flags in IR set*/
|
|
#define STS_EINT (1 << 3)
|
|
/* port change detect */
|
|
#define STS_PORT (1 << 4)
|
|
/* bits 5:7 reserved and zeroed */
|
|
/* save state status - '1' means xHC is saving state */
|
|
#define STS_SAVE (1 << 8)
|
|
/* restore state status - '1' means xHC is restoring state */
|
|
#define STS_RESTORE (1 << 9)
|
|
/* true: save or restore error */
|
|
#define STS_SRE (1 << 10)
|
|
/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
|
|
#define STS_CNR XHCI_STS_CNR
|
|
/* true: internal Host Controller Error - SW needs to reset and reinitialize */
|
|
#define STS_HCE (1 << 12)
|
|
/* bits 13:31 reserved and should be preserved */
|
|
|
|
/*
|
|
* DNCTRL - Device Notification Control Register - dev_notification bitmasks
|
|
* Generate a device notification event when the HC sees a transaction with a
|
|
* notification type that matches a bit set in this bit field.
|
|
*/
|
|
#define DEV_NOTE_MASK (0xffff)
|
|
#define ENABLE_DEV_NOTE(x) (1 << x)
|
|
/* Most of the device notification types should only be used for debug.
|
|
* SW does need to pay attention to function wake notifications.
|
|
*/
|
|
#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
|
|
|
|
/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
|
|
/* bit 0 is the command ring cycle state */
|
|
/* stop ring operation after completion of the currently executing command */
|
|
#define CMD_RING_PAUSE (1 << 1)
|
|
/* stop ring immediately - abort the currently executing command */
|
|
#define CMD_RING_ABORT (1 << 2)
|
|
/* true: command ring is running */
|
|
#define CMD_RING_RUNNING (1 << 3)
|
|
/* bits 4:5 reserved and should be preserved */
|
|
/* Command Ring pointer - bit mask for the lower 32 bits. */
|
|
#define CMD_RING_ADDR_MASK (0xffffffc0)
|
|
|
|
/* CONFIG - Configure Register - config_reg bitmasks */
|
|
/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
|
|
#define MAX_DEVS(p) ((p) & 0xff)
|
|
/* bits 8:31 - reserved and should be preserved */
|
|
|
|
/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
|
|
/* true: device connected */
|
|
#define PORT_CONNECT (1 << 0)
|
|
/* true: port enabled */
|
|
#define PORT_PE (1 << 1)
|
|
/* bit 2 reserved and zeroed */
|
|
/* true: port has an over-current condition */
|
|
#define PORT_OC (1 << 3)
|
|
/* true: port reset signaling asserted */
|
|
#define PORT_RESET (1 << 4)
|
|
/* Port Link State - bits 5:8
|
|
* A read gives the current link PM state of the port,
|
|
* a write with Link State Write Strobe set sets the link state.
|
|
*/
|
|
/* true: port has power (see HCC_PPC) */
|
|
#define PORT_POWER (1 << 9)
|
|
/* bits 10:13 indicate device speed:
|
|
* 0 - undefined speed - port hasn't be initialized by a reset yet
|
|
* 1 - full speed
|
|
* 2 - low speed
|
|
* 3 - high speed
|
|
* 4 - super speed
|
|
* 5-15 reserved
|
|
*/
|
|
#define DEV_SPEED_MASK (0xf << 10)
|
|
#define XDEV_FS (0x1 << 10)
|
|
#define XDEV_LS (0x2 << 10)
|
|
#define XDEV_HS (0x3 << 10)
|
|
#define XDEV_SS (0x4 << 10)
|
|
#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
|
|
#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
|
|
#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
|
|
#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
|
|
#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
|
|
/* Bits 20:23 in the Slot Context are the speed for the device */
|
|
#define SLOT_SPEED_FS (XDEV_FS << 10)
|
|
#define SLOT_SPEED_LS (XDEV_LS << 10)
|
|
#define SLOT_SPEED_HS (XDEV_HS << 10)
|
|
#define SLOT_SPEED_SS (XDEV_SS << 10)
|
|
/* Port Indicator Control */
|
|
#define PORT_LED_OFF (0 << 14)
|
|
#define PORT_LED_AMBER (1 << 14)
|
|
#define PORT_LED_GREEN (2 << 14)
|
|
#define PORT_LED_MASK (3 << 14)
|
|
/* Port Link State Write Strobe - set this when changing link state */
|
|
#define PORT_LINK_STROBE (1 << 16)
|
|
/* true: connect status change */
|
|
#define PORT_CSC (1 << 17)
|
|
/* true: port enable change */
|
|
#define PORT_PEC (1 << 18)
|
|
/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
|
|
* into an enabled state, and the device into the default state. A "warm" reset
|
|
* also resets the link, forcing the device through the link training sequence.
|
|
* SW can also look at the Port Reset register to see when warm reset is done.
|
|
*/
|
|
#define PORT_WRC (1 << 19)
|
|
/* true: over-current change */
|
|
#define PORT_OCC (1 << 20)
|
|
/* true: reset change - 1 to 0 transition of PORT_RESET */
|
|
#define PORT_RC (1 << 21)
|
|
/* port link status change - set on some port link state transitions:
|
|
* Transition Reason
|
|
* ------------------------------------------------------------------------------
|
|
* - U3 to Resume Wakeup signaling from a device
|
|
* - Resume to Recovery to U0 USB 3.0 device resume
|
|
* - Resume to U0 USB 2.0 device resume
|
|
* - U3 to Recovery to U0 Software resume of USB 3.0 device complete
|
|
* - U3 to U0 Software resume of USB 2.0 device complete
|
|
* - U2 to U0 L1 resume of USB 2.1 device complete
|
|
* - U0 to U0 (???) L1 entry rejection by USB 2.1 device
|
|
* - U0 to disabled L1 entry error with USB 2.1 device
|
|
* - Any state to inactive Error on USB 3.0 port
|
|
*/
|
|
#define PORT_PLC (1 << 22)
|
|
/* port configure error change - port failed to configure its link partner */
|
|
#define PORT_CEC (1 << 23)
|
|
/* bit 24 reserved */
|
|
/* wake on connect (enable) */
|
|
#define PORT_WKCONN_E (1 << 25)
|
|
/* wake on disconnect (enable) */
|
|
#define PORT_WKDISC_E (1 << 26)
|
|
/* wake on over-current (enable) */
|
|
#define PORT_WKOC_E (1 << 27)
|
|
/* bits 28:29 reserved */
|
|
/* true: device is removable - for USB 3.0 roothub emulation */
|
|
#define PORT_DEV_REMOVE (1 << 30)
|
|
/* Initiate a warm port reset - complete when PORT_WRC is '1' */
|
|
#define PORT_WR (1 << 31)
|
|
|
|
/* Port Power Management Status and Control - port_power_base bitmasks */
|
|
/* Inactivity timer value for transitions into U1, in microseconds.
|
|
* Timeout can be up to 127us. 0xFF means an infinite timeout.
|
|
*/
|
|
#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
|
|
/* Inactivity timer value for transitions into U2 */
|
|
#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
|
|
/* Bits 24:31 for port testing */
|
|
|
|
|
|
/**
|
|
* struct intr_reg - Interrupt Register Set
|
|
* @irq_pending: IMAN - Interrupt Management Register. Used to enable
|
|
* interrupts and check for pending interrupts.
|
|
* @irq_control: IMOD - Interrupt Moderation Register.
|
|
* Used to throttle interrupts.
|
|
* @erst_size: Number of segments in the Event Ring Segment Table (ERST).
|
|
* @erst_base: ERST base address.
|
|
* @erst_dequeue: Event ring dequeue pointer.
|
|
*
|
|
* Each interrupter (defined by a MSI-X vector) has an event ring and an Event
|
|
* Ring Segment Table (ERST) associated with it. The event ring is comprised of
|
|
* multiple segments of the same size. The HC places events on the ring and
|
|
* "updates the Cycle bit in the TRBs to indicate to software the current
|
|
* position of the Enqueue Pointer." The HCD (Linux) processes those events and
|
|
* updates the dequeue pointer.
|
|
*/
|
|
struct intr_reg {
|
|
u32 irq_pending;
|
|
u32 irq_control;
|
|
u32 erst_size;
|
|
u32 rsvd;
|
|
u32 erst_base[2];
|
|
u32 erst_dequeue[2];
|
|
} __attribute__ ((packed));
|
|
|
|
/* irq_pending bitmasks */
|
|
#define ER_IRQ_PENDING(p) ((p) & 0x1)
|
|
/* bits 2:31 need to be preserved */
|
|
/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
|
|
#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
|
|
#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
|
|
#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
|
|
|
|
/* irq_control bitmasks */
|
|
/* Minimum interval between interrupts (in 250ns intervals). The interval
|
|
* between interrupts will be longer if there are no events on the event ring.
|
|
* Default is 4000 (1 ms).
|
|
*/
|
|
#define ER_IRQ_INTERVAL_MASK (0xffff)
|
|
/* Counter used to count down the time to the next interrupt - HW use only */
|
|
#define ER_IRQ_COUNTER_MASK (0xffff << 16)
|
|
|
|
/* erst_size bitmasks */
|
|
/* Preserve bits 16:31 of erst_size */
|
|
#define ERST_SIZE_MASK (0xffff << 16)
|
|
|
|
/* erst_dequeue bitmasks */
|
|
/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
|
|
* where the current dequeue pointer lies. This is an optional HW hint.
|
|
*/
|
|
#define ERST_DESI_MASK (0x7)
|
|
/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
|
|
* a work queue (or delayed service routine)?
|
|
*/
|
|
#define ERST_EHB (1 << 3)
|
|
#define ERST_PTR_MASK (0xf)
|
|
|
|
/**
|
|
* struct xhci_run_regs
|
|
* @microframe_index:
|
|
* MFINDEX - current microframe number
|
|
*
|
|
* Section 5.5 Host Controller Runtime Registers:
|
|
* "Software should read and write these registers using only Dword (32 bit)
|
|
* or larger accesses"
|
|
*/
|
|
struct xhci_run_regs {
|
|
u32 microframe_index;
|
|
u32 rsvd[7];
|
|
struct intr_reg ir_set[128];
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct doorbell_array
|
|
*
|
|
* Section 5.6
|
|
*/
|
|
struct xhci_doorbell_array {
|
|
u32 doorbell[256];
|
|
} __attribute__ ((packed));
|
|
|
|
#define DB_TARGET_MASK 0xFFFFFF00
|
|
#define DB_STREAM_ID_MASK 0x0000FFFF
|
|
#define DB_TARGET_HOST 0x0
|
|
#define DB_STREAM_ID_HOST 0x0
|
|
#define DB_MASK (0xff << 8)
|
|
|
|
/* Endpoint Target - bits 0:7 */
|
|
#define EPI_TO_DB(p) (((p) + 1) & 0xff)
|
|
|
|
|
|
/**
|
|
* struct xhci_slot_ctx
|
|
* @dev_info: Route string, device speed, hub info, and last valid endpoint
|
|
* @dev_info2: Max exit latency for device number, root hub port number
|
|
* @tt_info: tt_info is used to construct split transaction tokens
|
|
* @dev_state: slot state and device address
|
|
*
|
|
* Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
|
|
* structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
|
|
* reserved at the end of the slot context for HC internal use.
|
|
*/
|
|
struct xhci_slot_ctx {
|
|
u32 dev_info;
|
|
u32 dev_info2;
|
|
u32 tt_info;
|
|
u32 dev_state;
|
|
/* offset 0x10 to 0x1f reserved for HC internal use */
|
|
u32 reserved[4];
|
|
} __attribute__ ((packed));
|
|
|
|
/* dev_info bitmasks */
|
|
/* Route String - 0:19 */
|
|
#define ROUTE_STRING_MASK (0xfffff)
|
|
/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
|
|
#define DEV_SPEED (0xf << 20)
|
|
/* bit 24 reserved */
|
|
/* Is this LS/FS device connected through a HS hub? - bit 25 */
|
|
#define DEV_MTT (0x1 << 25)
|
|
/* Set if the device is a hub - bit 26 */
|
|
#define DEV_HUB (0x1 << 26)
|
|
/* Index of the last valid endpoint context in this device context - 27:31 */
|
|
#define LAST_CTX_MASK (0x1f << 27)
|
|
#define LAST_CTX(p) ((p) << 27)
|
|
#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
|
|
#define SLOT_FLAG (1 << 0)
|
|
#define EP0_FLAG (1 << 1)
|
|
|
|
/* dev_info2 bitmasks */
|
|
/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
|
|
#define MAX_EXIT (0xffff)
|
|
/* Root hub port number that is needed to access the USB device */
|
|
#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
|
|
|
|
/* tt_info bitmasks */
|
|
/*
|
|
* TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
|
|
* The Slot ID of the hub that isolates the high speed signaling from
|
|
* this low or full-speed device. '0' if attached to root hub port.
|
|
*/
|
|
#define TT_SLOT (0xff)
|
|
/*
|
|
* The number of the downstream facing port of the high-speed hub
|
|
* '0' if the device is not low or full speed.
|
|
*/
|
|
#define TT_PORT (0xff << 8)
|
|
|
|
/* dev_state bitmasks */
|
|
/* USB device address - assigned by the HC */
|
|
#define DEV_ADDR_MASK (0xff)
|
|
/* bits 8:26 reserved */
|
|
/* Slot state */
|
|
#define SLOT_STATE (0x1f << 27)
|
|
#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
|
|
|
|
|
|
/**
|
|
* struct xhci_ep_ctx
|
|
* @ep_info: endpoint state, streams, mult, and interval information.
|
|
* @ep_info2: information on endpoint type, max packet size, max burst size,
|
|
* error count, and whether the HC will force an event for all
|
|
* transactions.
|
|
* @deq: 64-bit ring dequeue pointer address. If the endpoint only
|
|
* defines one stream, this points to the endpoint transfer ring.
|
|
* Otherwise, it points to a stream context array, which has a
|
|
* ring pointer for each flow.
|
|
* @tx_info:
|
|
* Average TRB lengths for the endpoint ring and
|
|
* max payload within an Endpoint Service Interval Time (ESIT).
|
|
*
|
|
* Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
|
|
* structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
|
|
* reserved at the end of the endpoint context for HC internal use.
|
|
*/
|
|
struct xhci_ep_ctx {
|
|
u32 ep_info;
|
|
u32 ep_info2;
|
|
u32 deq[2];
|
|
u32 tx_info;
|
|
/* offset 0x14 - 0x1f reserved for HC internal use */
|
|
u32 reserved[3];
|
|
} __attribute__ ((packed));
|
|
|
|
/* ep_info bitmasks */
|
|
/*
|
|
* Endpoint State - bits 0:2
|
|
* 0 - disabled
|
|
* 1 - running
|
|
* 2 - halted due to halt condition - ok to manipulate endpoint ring
|
|
* 3 - stopped
|
|
* 4 - TRB error
|
|
* 5-7 - reserved
|
|
*/
|
|
#define EP_STATE_MASK (0xf)
|
|
#define EP_STATE_DISABLED 0
|
|
#define EP_STATE_RUNNING 1
|
|
#define EP_STATE_HALTED 2
|
|
#define EP_STATE_STOPPED 3
|
|
#define EP_STATE_ERROR 4
|
|
/* Mult - Max number of burtst within an interval, in EP companion desc. */
|
|
#define EP_MULT(p) ((p & 0x3) << 8)
|
|
/* bits 10:14 are Max Primary Streams */
|
|
/* bit 15 is Linear Stream Array */
|
|
/* Interval - period between requests to an endpoint - 125u increments. */
|
|
#define EP_INTERVAL(p) ((p & 0xff) << 16)
|
|
|
|
/* ep_info2 bitmasks */
|
|
/*
|
|
* Force Event - generate transfer events for all TRBs for this endpoint
|
|
* This will tell the HC to ignore the IOC and ISP flags (for debugging only).
|
|
*/
|
|
#define FORCE_EVENT (0x1)
|
|
#define ERROR_COUNT(p) (((p) & 0x3) << 1)
|
|
#define EP_TYPE(p) ((p) << 3)
|
|
#define ISOC_OUT_EP 1
|
|
#define BULK_OUT_EP 2
|
|
#define INT_OUT_EP 3
|
|
#define CTRL_EP 4
|
|
#define ISOC_IN_EP 5
|
|
#define BULK_IN_EP 6
|
|
#define INT_IN_EP 7
|
|
/* bit 6 reserved */
|
|
/* bit 7 is Host Initiate Disable - for disabling stream selection */
|
|
#define MAX_BURST(p) (((p)&0xff) << 8)
|
|
#define MAX_PACKET(p) (((p)&0xffff) << 16)
|
|
|
|
|
|
/**
|
|
* struct xhci_device_control
|
|
* Input/Output context; see section 6.2.5.
|
|
*
|
|
* @drop_context: set the bit of the endpoint context you want to disable
|
|
* @add_context: set the bit of the endpoint context you want to enable
|
|
*/
|
|
struct xhci_device_control {
|
|
u32 drop_flags;
|
|
u32 add_flags;
|
|
u32 rsvd[6];
|
|
struct xhci_slot_ctx slot;
|
|
struct xhci_ep_ctx ep[31];
|
|
} __attribute__ ((packed));
|
|
|
|
/* drop context bitmasks */
|
|
#define DROP_EP(x) (0x1 << x)
|
|
/* add context bitmasks */
|
|
#define ADD_EP(x) (0x1 << x)
|
|
|
|
|
|
struct xhci_virt_device {
|
|
/*
|
|
* Commands to the hardware are passed an "input context" that
|
|
* tells the hardware what to change in its data structures.
|
|
* The hardware will return changes in an "output context" that
|
|
* software must allocate for the hardware. We need to keep
|
|
* track of input and output contexts separately because
|
|
* these commands might fail and we don't trust the hardware.
|
|
*/
|
|
struct xhci_device_control *out_ctx;
|
|
dma_addr_t out_ctx_dma;
|
|
/* Used for addressing devices and configuration changes */
|
|
struct xhci_device_control *in_ctx;
|
|
dma_addr_t in_ctx_dma;
|
|
/* FIXME when stream support is added */
|
|
struct xhci_ring *ep_rings[31];
|
|
/* Temporary storage in case the configure endpoint command fails and we
|
|
* have to restore the device state to the previous state
|
|
*/
|
|
struct xhci_ring *new_ep_rings[31];
|
|
struct completion cmd_completion;
|
|
/* Status of the last command issued for this device */
|
|
u32 cmd_status;
|
|
};
|
|
|
|
|
|
/**
|
|
* struct xhci_device_context_array
|
|
* @dev_context_ptr array of 64-bit DMA addresses for device contexts
|
|
*/
|
|
struct xhci_device_context_array {
|
|
/* 64-bit device addresses; we only write 32-bit addresses */
|
|
u32 dev_context_ptrs[2*MAX_HC_SLOTS];
|
|
/* private xHCD pointers */
|
|
dma_addr_t dma;
|
|
} __attribute__ ((packed));
|
|
/* TODO: write function to set the 64-bit device DMA address */
|
|
/*
|
|
* TODO: change this to be dynamically sized at HC mem init time since the HC
|
|
* might not be able to handle the maximum number of devices possible.
|
|
*/
|
|
|
|
|
|
struct xhci_stream_ctx {
|
|
/* 64-bit stream ring address, cycle state, and stream type */
|
|
u32 stream_ring[2];
|
|
/* offset 0x14 - 0x1f reserved for HC internal use */
|
|
u32 reserved[2];
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
struct xhci_transfer_event {
|
|
/* 64-bit buffer address, or immediate data */
|
|
u32 buffer[2];
|
|
u32 transfer_len;
|
|
/* This field is interpreted differently based on the type of TRB */
|
|
u32 flags;
|
|
} __attribute__ ((packed));
|
|
|
|
/** Transfer Event bit fields **/
|
|
#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
|
|
|
|
/* Completion Code - only applicable for some types of TRBs */
|
|
#define COMP_CODE_MASK (0xff << 24)
|
|
#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
|
|
#define COMP_SUCCESS 1
|
|
/* Data Buffer Error */
|
|
#define COMP_DB_ERR 2
|
|
/* Babble Detected Error */
|
|
#define COMP_BABBLE 3
|
|
/* USB Transaction Error */
|
|
#define COMP_TX_ERR 4
|
|
/* TRB Error - some TRB field is invalid */
|
|
#define COMP_TRB_ERR 5
|
|
/* Stall Error - USB device is stalled */
|
|
#define COMP_STALL 6
|
|
/* Resource Error - HC doesn't have memory for that device configuration */
|
|
#define COMP_ENOMEM 7
|
|
/* Bandwidth Error - not enough room in schedule for this dev config */
|
|
#define COMP_BW_ERR 8
|
|
/* No Slots Available Error - HC ran out of device slots */
|
|
#define COMP_ENOSLOTS 9
|
|
/* Invalid Stream Type Error */
|
|
#define COMP_STREAM_ERR 10
|
|
/* Slot Not Enabled Error - doorbell rung for disabled device slot */
|
|
#define COMP_EBADSLT 11
|
|
/* Endpoint Not Enabled Error */
|
|
#define COMP_EBADEP 12
|
|
/* Short Packet */
|
|
#define COMP_SHORT_TX 13
|
|
/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
|
|
#define COMP_UNDERRUN 14
|
|
/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
|
|
#define COMP_OVERRUN 15
|
|
/* Virtual Function Event Ring Full Error */
|
|
#define COMP_VF_FULL 16
|
|
/* Parameter Error - Context parameter is invalid */
|
|
#define COMP_EINVAL 17
|
|
/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
|
|
#define COMP_BW_OVER 18
|
|
/* Context State Error - illegal context state transition requested */
|
|
#define COMP_CTX_STATE 19
|
|
/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
|
|
#define COMP_PING_ERR 20
|
|
/* Event Ring is full */
|
|
#define COMP_ER_FULL 21
|
|
/* Missed Service Error - HC couldn't service an isoc ep within interval */
|
|
#define COMP_MISSED_INT 23
|
|
/* Successfully stopped command ring */
|
|
#define COMP_CMD_STOP 24
|
|
/* Successfully aborted current command and stopped command ring */
|
|
#define COMP_CMD_ABORT 25
|
|
/* Stopped - transfer was terminated by a stop endpoint command */
|
|
#define COMP_STOP 26
|
|
/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */
|
|
#define COMP_STOP_INVAL 27
|
|
/* Control Abort Error - Debug Capability - control pipe aborted */
|
|
#define COMP_DBG_ABORT 28
|
|
/* TRB type 29 and 30 reserved */
|
|
/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
|
|
#define COMP_BUFF_OVER 31
|
|
/* Event Lost Error - xHC has an "internal event overrun condition" */
|
|
#define COMP_ISSUES 32
|
|
/* Undefined Error - reported when other error codes don't apply */
|
|
#define COMP_UNKNOWN 33
|
|
/* Invalid Stream ID Error */
|
|
#define COMP_STRID_ERR 34
|
|
/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
|
|
/* FIXME - check for this */
|
|
#define COMP_2ND_BW_ERR 35
|
|
/* Split Transaction Error */
|
|
#define COMP_SPLIT_ERR 36
|
|
|
|
struct xhci_link_trb {
|
|
/* 64-bit segment pointer*/
|
|
u32 segment_ptr[2];
|
|
u32 intr_target;
|
|
u32 control;
|
|
} __attribute__ ((packed));
|
|
|
|
/* control bitfields */
|
|
#define LINK_TOGGLE (0x1<<1)
|
|
|
|
/* Command completion event TRB */
|
|
struct xhci_event_cmd {
|
|
/* Pointer to command TRB, or the value passed by the event data trb */
|
|
u32 cmd_trb[2];
|
|
u32 status;
|
|
u32 flags;
|
|
} __attribute__ ((packed));
|
|
|
|
/* flags bitmasks */
|
|
/* bits 16:23 are the virtual function ID */
|
|
/* bits 24:31 are the slot ID */
|
|
#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
|
|
#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
|
|
|
|
/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
|
|
#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
|
|
#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
|
|
|
|
|
|
/* Port Status Change Event TRB fields */
|
|
/* Port ID - bits 31:24 */
|
|
#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
|
|
|
|
/* Normal TRB fields */
|
|
/* transfer_len bitmasks - bits 0:16 */
|
|
#define TRB_LEN(p) ((p) & 0x1ffff)
|
|
/* TD size - number of bytes remaining in the TD (including this TRB):
|
|
* bits 17 - 21. Shift the number of bytes by 10. */
|
|
#define TD_REMAINDER(p) ((((p) >> 10) & 0x1f) << 17)
|
|
/* Interrupter Target - which MSI-X vector to target the completion event at */
|
|
#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
|
|
#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
|
|
|
|
/* Cycle bit - indicates TRB ownership by HC or HCD */
|
|
#define TRB_CYCLE (1<<0)
|
|
/*
|
|
* Force next event data TRB to be evaluated before task switch.
|
|
* Used to pass OS data back after a TD completes.
|
|
*/
|
|
#define TRB_ENT (1<<1)
|
|
/* Interrupt on short packet */
|
|
#define TRB_ISP (1<<2)
|
|
/* Set PCIe no snoop attribute */
|
|
#define TRB_NO_SNOOP (1<<3)
|
|
/* Chain multiple TRBs into a TD */
|
|
#define TRB_CHAIN (1<<4)
|
|
/* Interrupt on completion */
|
|
#define TRB_IOC (1<<5)
|
|
/* The buffer pointer contains immediate data */
|
|
#define TRB_IDT (1<<6)
|
|
|
|
|
|
/* Control transfer TRB specific fields */
|
|
#define TRB_DIR_IN (1<<16)
|
|
|
|
struct xhci_generic_trb {
|
|
u32 field[4];
|
|
} __attribute__ ((packed));
|
|
|
|
union xhci_trb {
|
|
struct xhci_link_trb link;
|
|
struct xhci_transfer_event trans_event;
|
|
struct xhci_event_cmd event_cmd;
|
|
struct xhci_generic_trb generic;
|
|
};
|
|
|
|
/* TRB bit mask */
|
|
#define TRB_TYPE_BITMASK (0xfc00)
|
|
#define TRB_TYPE(p) ((p) << 10)
|
|
/* TRB type IDs */
|
|
/* bulk, interrupt, isoc scatter/gather, and control data stage */
|
|
#define TRB_NORMAL 1
|
|
/* setup stage for control transfers */
|
|
#define TRB_SETUP 2
|
|
/* data stage for control transfers */
|
|
#define TRB_DATA 3
|
|
/* status stage for control transfers */
|
|
#define TRB_STATUS 4
|
|
/* isoc transfers */
|
|
#define TRB_ISOC 5
|
|
/* TRB for linking ring segments */
|
|
#define TRB_LINK 6
|
|
#define TRB_EVENT_DATA 7
|
|
/* Transfer Ring No-op (not for the command ring) */
|
|
#define TRB_TR_NOOP 8
|
|
/* Command TRBs */
|
|
/* Enable Slot Command */
|
|
#define TRB_ENABLE_SLOT 9
|
|
/* Disable Slot Command */
|
|
#define TRB_DISABLE_SLOT 10
|
|
/* Address Device Command */
|
|
#define TRB_ADDR_DEV 11
|
|
/* Configure Endpoint Command */
|
|
#define TRB_CONFIG_EP 12
|
|
/* Evaluate Context Command */
|
|
#define TRB_EVAL_CONTEXT 13
|
|
/* Reset Transfer Ring Command */
|
|
#define TRB_RESET_RING 14
|
|
/* Stop Transfer Ring Command */
|
|
#define TRB_STOP_RING 15
|
|
/* Set Transfer Ring Dequeue Pointer Command */
|
|
#define TRB_SET_DEQ 16
|
|
/* Reset Device Command */
|
|
#define TRB_RESET_DEV 17
|
|
/* Force Event Command (opt) */
|
|
#define TRB_FORCE_EVENT 18
|
|
/* Negotiate Bandwidth Command (opt) */
|
|
#define TRB_NEG_BANDWIDTH 19
|
|
/* Set Latency Tolerance Value Command (opt) */
|
|
#define TRB_SET_LT 20
|
|
/* Get port bandwidth Command */
|
|
#define TRB_GET_BW 21
|
|
/* Force Header Command - generate a transaction or link management packet */
|
|
#define TRB_FORCE_HEADER 22
|
|
/* No-op Command - not for transfer rings */
|
|
#define TRB_CMD_NOOP 23
|
|
/* TRB IDs 24-31 reserved */
|
|
/* Event TRBS */
|
|
/* Transfer Event */
|
|
#define TRB_TRANSFER 32
|
|
/* Command Completion Event */
|
|
#define TRB_COMPLETION 33
|
|
/* Port Status Change Event */
|
|
#define TRB_PORT_STATUS 34
|
|
/* Bandwidth Request Event (opt) */
|
|
#define TRB_BANDWIDTH_EVENT 35
|
|
/* Doorbell Event (opt) */
|
|
#define TRB_DOORBELL 36
|
|
/* Host Controller Event */
|
|
#define TRB_HC_EVENT 37
|
|
/* Device Notification Event - device sent function wake notification */
|
|
#define TRB_DEV_NOTE 38
|
|
/* MFINDEX Wrap Event - microframe counter wrapped */
|
|
#define TRB_MFINDEX_WRAP 39
|
|
/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
|
|
|
|
/*
|
|
* TRBS_PER_SEGMENT must be a multiple of 4,
|
|
* since the command ring is 64-byte aligned.
|
|
* It must also be greater than 16.
|
|
*/
|
|
#define TRBS_PER_SEGMENT 64
|
|
#define SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
|
|
/* TRB buffer pointers can't cross 64KB boundaries */
|
|
#define TRB_MAX_BUFF_SHIFT 16
|
|
#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
|
|
|
|
struct xhci_segment {
|
|
union xhci_trb *trbs;
|
|
/* private to HCD */
|
|
struct xhci_segment *next;
|
|
dma_addr_t dma;
|
|
} __attribute__ ((packed));
|
|
|
|
struct xhci_td {
|
|
struct list_head td_list;
|
|
struct list_head cancelled_td_list;
|
|
struct urb *urb;
|
|
struct xhci_segment *start_seg;
|
|
union xhci_trb *first_trb;
|
|
union xhci_trb *last_trb;
|
|
};
|
|
|
|
struct xhci_ring {
|
|
struct xhci_segment *first_seg;
|
|
union xhci_trb *enqueue;
|
|
struct xhci_segment *enq_seg;
|
|
unsigned int enq_updates;
|
|
union xhci_trb *dequeue;
|
|
struct xhci_segment *deq_seg;
|
|
unsigned int deq_updates;
|
|
struct list_head td_list;
|
|
/* ---- Related to URB cancellation ---- */
|
|
struct list_head cancelled_td_list;
|
|
unsigned int cancels_pending;
|
|
unsigned int state;
|
|
#define SET_DEQ_PENDING (1 << 0)
|
|
/* The TRB that was last reported in a stopped endpoint ring */
|
|
union xhci_trb *stopped_trb;
|
|
struct xhci_td *stopped_td;
|
|
/*
|
|
* Write the cycle state into the TRB cycle field to give ownership of
|
|
* the TRB to the host controller (if we are the producer), or to check
|
|
* if we own the TRB (if we are the consumer). See section 4.9.1.
|
|
*/
|
|
u32 cycle_state;
|
|
};
|
|
|
|
struct xhci_erst_entry {
|
|
/* 64-bit event ring segment address */
|
|
u32 seg_addr[2];
|
|
u32 seg_size;
|
|
/* Set to zero */
|
|
u32 rsvd;
|
|
} __attribute__ ((packed));
|
|
|
|
struct xhci_erst {
|
|
struct xhci_erst_entry *entries;
|
|
unsigned int num_entries;
|
|
/* xhci->event_ring keeps track of segment dma addresses */
|
|
dma_addr_t erst_dma_addr;
|
|
/* Num entries the ERST can contain */
|
|
unsigned int erst_size;
|
|
};
|
|
|
|
/*
|
|
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
|
|
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
|
|
* meaning 64 ring segments.
|
|
* Initial allocated size of the ERST, in number of entries */
|
|
#define ERST_NUM_SEGS 1
|
|
/* Initial allocated size of the ERST, in number of entries */
|
|
#define ERST_SIZE 64
|
|
/* Initial number of event segment rings allocated */
|
|
#define ERST_ENTRIES 1
|
|
/* Poll every 60 seconds */
|
|
#define POLL_TIMEOUT 60
|
|
/* XXX: Make these module parameters */
|
|
|
|
|
|
/* There is one ehci_hci structure per controller */
|
|
struct xhci_hcd {
|
|
/* glue to PCI and HCD framework */
|
|
struct xhci_cap_regs __iomem *cap_regs;
|
|
struct xhci_op_regs __iomem *op_regs;
|
|
struct xhci_run_regs __iomem *run_regs;
|
|
struct xhci_doorbell_array __iomem *dba;
|
|
/* Our HCD's current interrupter register set */
|
|
struct intr_reg __iomem *ir_set;
|
|
|
|
/* Cached register copies of read-only HC data */
|
|
__u32 hcs_params1;
|
|
__u32 hcs_params2;
|
|
__u32 hcs_params3;
|
|
__u32 hcc_params;
|
|
|
|
spinlock_t lock;
|
|
|
|
/* packed release number */
|
|
u8 sbrn;
|
|
u16 hci_version;
|
|
u8 max_slots;
|
|
u8 max_interrupters;
|
|
u8 max_ports;
|
|
u8 isoc_threshold;
|
|
int event_ring_max;
|
|
int addr_64;
|
|
/* 4KB min, 128MB max */
|
|
int page_size;
|
|
/* Valid values are 12 to 20, inclusive */
|
|
int page_shift;
|
|
/* only one MSI vector for now, but might need more later */
|
|
int msix_count;
|
|
struct msix_entry *msix_entries;
|
|
/* data structures */
|
|
struct xhci_device_context_array *dcbaa;
|
|
struct xhci_ring *cmd_ring;
|
|
struct xhci_ring *event_ring;
|
|
struct xhci_erst erst;
|
|
/* slot enabling and address device helpers */
|
|
struct completion addr_dev;
|
|
int slot_id;
|
|
/* Internal mirror of the HW's dcbaa */
|
|
struct xhci_virt_device *devs[MAX_HC_SLOTS];
|
|
|
|
/* DMA pools */
|
|
struct dma_pool *device_pool;
|
|
struct dma_pool *segment_pool;
|
|
|
|
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
|
|
/* Poll the rings - for debugging */
|
|
struct timer_list event_ring_timer;
|
|
int zombie;
|
|
#endif
|
|
/* Statistics */
|
|
int noops_submitted;
|
|
int noops_handled;
|
|
int error_bitmask;
|
|
};
|
|
|
|
/* For testing purposes */
|
|
#define NUM_TEST_NOOPS 0
|
|
|
|
/* convert between an HCD pointer and the corresponding EHCI_HCD */
|
|
static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
|
|
{
|
|
return (struct xhci_hcd *) (hcd->hcd_priv);
|
|
}
|
|
|
|
static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
|
|
{
|
|
return container_of((void *) xhci, struct usb_hcd, hcd_priv);
|
|
}
|
|
|
|
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
|
|
#define XHCI_DEBUG 1
|
|
#else
|
|
#define XHCI_DEBUG 0
|
|
#endif
|
|
|
|
#define xhci_dbg(xhci, fmt, args...) \
|
|
do { if (XHCI_DEBUG) dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
|
|
#define xhci_info(xhci, fmt, args...) \
|
|
do { if (XHCI_DEBUG) dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
|
|
#define xhci_err(xhci, fmt, args...) \
|
|
dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
|
|
#define xhci_warn(xhci, fmt, args...) \
|
|
dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
|
|
|
|
/* TODO: copied from ehci.h - can be refactored? */
|
|
/* xHCI spec says all registers are little endian */
|
|
static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
|
|
__u32 __iomem *regs)
|
|
{
|
|
return readl(regs);
|
|
}
|
|
static inline void xhci_writel(const struct xhci_hcd *xhci,
|
|
const unsigned int val, __u32 __iomem *regs)
|
|
{
|
|
if (!in_interrupt())
|
|
xhci_dbg(xhci, "`MEM_WRITE_DWORD(3'b000, 32'h%0x, 32'h%0x, 4'hf);\n",
|
|
(unsigned int) regs, val);
|
|
writel(val, regs);
|
|
}
|
|
|
|
/* xHCI debugging */
|
|
void xhci_print_ir_set(struct xhci_hcd *xhci, struct intr_reg *ir_set, int set_num);
|
|
void xhci_print_registers(struct xhci_hcd *xhci);
|
|
void xhci_dbg_regs(struct xhci_hcd *xhci);
|
|
void xhci_print_run_regs(struct xhci_hcd *xhci);
|
|
void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb);
|
|
void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb);
|
|
void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg);
|
|
void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
|
|
void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
|
|
void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
|
|
void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
|
|
void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
|
|
|
|
/* xHCI memory managment */
|
|
void xhci_mem_cleanup(struct xhci_hcd *xhci);
|
|
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
|
|
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
|
|
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
|
|
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
|
|
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
|
|
unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
|
|
void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
|
|
int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_device *udev, struct usb_host_endpoint *ep);
|
|
void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
|
|
|
|
#ifdef CONFIG_PCI
|
|
/* xHCI PCI glue */
|
|
int xhci_register_pci(void);
|
|
void xhci_unregister_pci(void);
|
|
#endif
|
|
|
|
/* xHCI host controller glue */
|
|
int xhci_halt(struct xhci_hcd *xhci);
|
|
int xhci_reset(struct xhci_hcd *xhci);
|
|
int xhci_init(struct usb_hcd *hcd);
|
|
int xhci_run(struct usb_hcd *hcd);
|
|
void xhci_stop(struct usb_hcd *hcd);
|
|
void xhci_shutdown(struct usb_hcd *hcd);
|
|
int xhci_get_frame(struct usb_hcd *hcd);
|
|
irqreturn_t xhci_irq(struct usb_hcd *hcd);
|
|
int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
|
|
void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
|
|
int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
|
|
int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
|
|
int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
|
|
int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
|
|
int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
|
|
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
|
|
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
|
|
|
|
/* xHCI ring, segment, TRB, and TD functions */
|
|
dma_addr_t trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
|
|
void ring_cmd_db(struct xhci_hcd *xhci);
|
|
void *setup_one_noop(struct xhci_hcd *xhci);
|
|
void xhci_handle_event(struct xhci_hcd *xhci);
|
|
void set_hc_event_deq(struct xhci_hcd *xhci);
|
|
int queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
|
|
int queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id);
|
|
int queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
|
|
unsigned int ep_index);
|
|
int queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index);
|
|
int queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index);
|
|
int queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id);
|
|
|
|
/* xHCI roothub code */
|
|
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
|
|
char *buf, u16 wLength);
|
|
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
|
|
|
|
#endif /* __LINUX_XHCI_HCD_H */
|