forked from Minki/linux
77ba6b7396
For MFC firmwares, improved versions with bug fixes and feature additions are released keeping the firmware version including major and minor number same. The issue came with the release of a new MFCv6 firmware with an interface change. This patch adds the support of accepting multiple firmware binaries for every version with the driver trying to load firmwares starting from latest. This ensures full backward compatibility regardless of which firmware version and kernel version is used. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
440 lines
12 KiB
C
440 lines
12 KiB
C
/*
|
|
* linux/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
|
|
*
|
|
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/sched.h>
|
|
#include "s5p_mfc_cmd.h"
|
|
#include "s5p_mfc_common.h"
|
|
#include "s5p_mfc_debug.h"
|
|
#include "s5p_mfc_intr.h"
|
|
#include "s5p_mfc_opr.h"
|
|
#include "s5p_mfc_pm.h"
|
|
|
|
/* Allocate memory for firmware */
|
|
int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev)
|
|
{
|
|
void *bank2_virt;
|
|
dma_addr_t bank2_dma_addr;
|
|
|
|
dev->fw_size = dev->variant->buf_size->fw;
|
|
|
|
if (dev->fw_virt_addr) {
|
|
mfc_err("Attempting to allocate firmware when it seems that it is already loaded\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev->fw_virt_addr = dma_alloc_coherent(dev->mem_dev_l, dev->fw_size,
|
|
&dev->bank1, GFP_KERNEL);
|
|
|
|
if (!dev->fw_virt_addr) {
|
|
mfc_err("Allocating bitprocessor buffer failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (HAS_PORTNUM(dev) && IS_TWOPORT(dev)) {
|
|
bank2_virt = dma_alloc_coherent(dev->mem_dev_r, 1 << MFC_BASE_ALIGN_ORDER,
|
|
&bank2_dma_addr, GFP_KERNEL);
|
|
|
|
if (!bank2_virt) {
|
|
mfc_err("Allocating bank2 base failed\n");
|
|
dma_free_coherent(dev->mem_dev_l, dev->fw_size,
|
|
dev->fw_virt_addr, dev->bank1);
|
|
dev->fw_virt_addr = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Valid buffers passed to MFC encoder with LAST_FRAME command
|
|
* should not have address of bank2 - MFC will treat it as a null frame.
|
|
* To avoid such situation we set bank2 address below the pool address.
|
|
*/
|
|
dev->bank2 = bank2_dma_addr - (1 << MFC_BASE_ALIGN_ORDER);
|
|
|
|
dma_free_coherent(dev->mem_dev_r, 1 << MFC_BASE_ALIGN_ORDER,
|
|
bank2_virt, bank2_dma_addr);
|
|
|
|
} else {
|
|
/* In this case bank2 can point to the same address as bank1.
|
|
* Firmware will always occupy the beginning of this area so it is
|
|
* impossible having a video frame buffer with zero address. */
|
|
dev->bank2 = dev->bank1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Load firmware */
|
|
int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
|
|
{
|
|
struct firmware *fw_blob;
|
|
int i, err = -EINVAL;
|
|
|
|
/* Firmare has to be present as a separate file or compiled
|
|
* into kernel. */
|
|
mfc_debug_enter();
|
|
|
|
for (i = MFC_FW_MAX_VERSIONS - 1; i >= 0; i--) {
|
|
if (!dev->variant->fw_name[i])
|
|
continue;
|
|
err = request_firmware((const struct firmware **)&fw_blob,
|
|
dev->variant->fw_name[i], dev->v4l2_dev.dev);
|
|
if (!err) {
|
|
dev->fw_ver = (enum s5p_mfc_fw_ver) i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (err != 0) {
|
|
mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
|
|
return -EINVAL;
|
|
}
|
|
if (fw_blob->size > dev->fw_size) {
|
|
mfc_err("MFC firmware is too big to be loaded\n");
|
|
release_firmware(fw_blob);
|
|
return -ENOMEM;
|
|
}
|
|
if (!dev->fw_virt_addr) {
|
|
mfc_err("MFC firmware is not allocated\n");
|
|
release_firmware(fw_blob);
|
|
return -EINVAL;
|
|
}
|
|
memcpy(dev->fw_virt_addr, fw_blob->data, fw_blob->size);
|
|
wmb();
|
|
release_firmware(fw_blob);
|
|
mfc_debug_leave();
|
|
return 0;
|
|
}
|
|
|
|
/* Release firmware memory */
|
|
int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
|
|
{
|
|
/* Before calling this function one has to make sure
|
|
* that MFC is no longer processing */
|
|
if (!dev->fw_virt_addr)
|
|
return -EINVAL;
|
|
dma_free_coherent(dev->mem_dev_l, dev->fw_size, dev->fw_virt_addr,
|
|
dev->bank1);
|
|
dev->fw_virt_addr = NULL;
|
|
return 0;
|
|
}
|
|
|
|
/* Reset the device */
|
|
int s5p_mfc_reset(struct s5p_mfc_dev *dev)
|
|
{
|
|
unsigned int mc_status;
|
|
unsigned long timeout;
|
|
int i;
|
|
|
|
mfc_debug_enter();
|
|
|
|
if (IS_MFCV6_PLUS(dev)) {
|
|
/* Reset IP */
|
|
/* except RISC, reset */
|
|
mfc_write(dev, 0xFEE, S5P_FIMV_MFC_RESET_V6);
|
|
/* reset release */
|
|
mfc_write(dev, 0x0, S5P_FIMV_MFC_RESET_V6);
|
|
|
|
/* Zero Initialization of MFC registers */
|
|
mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD_V6);
|
|
mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD_V6);
|
|
mfc_write(dev, 0, S5P_FIMV_FW_VERSION_V6);
|
|
|
|
for (i = 0; i < S5P_FIMV_REG_CLEAR_COUNT_V6; i++)
|
|
mfc_write(dev, 0, S5P_FIMV_REG_CLEAR_BEGIN_V6 + (i*4));
|
|
|
|
/* Reset */
|
|
mfc_write(dev, 0, S5P_FIMV_RISC_ON_V6);
|
|
mfc_write(dev, 0x1FFF, S5P_FIMV_MFC_RESET_V6);
|
|
mfc_write(dev, 0, S5P_FIMV_MFC_RESET_V6);
|
|
} else {
|
|
/* Stop procedure */
|
|
/* reset RISC */
|
|
mfc_write(dev, 0x3f6, S5P_FIMV_SW_RESET);
|
|
/* All reset except for MC */
|
|
mfc_write(dev, 0x3e2, S5P_FIMV_SW_RESET);
|
|
mdelay(10);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
|
|
/* Check MC status */
|
|
do {
|
|
if (time_after(jiffies, timeout)) {
|
|
mfc_err("Timeout while resetting MFC\n");
|
|
return -EIO;
|
|
}
|
|
|
|
mc_status = mfc_read(dev, S5P_FIMV_MC_STATUS);
|
|
|
|
} while (mc_status & 0x3);
|
|
|
|
mfc_write(dev, 0x0, S5P_FIMV_SW_RESET);
|
|
mfc_write(dev, 0x3fe, S5P_FIMV_SW_RESET);
|
|
}
|
|
|
|
mfc_debug_leave();
|
|
return 0;
|
|
}
|
|
|
|
static inline void s5p_mfc_init_memctrl(struct s5p_mfc_dev *dev)
|
|
{
|
|
if (IS_MFCV6_PLUS(dev)) {
|
|
mfc_write(dev, dev->bank1, S5P_FIMV_RISC_BASE_ADDRESS_V6);
|
|
mfc_debug(2, "Base Address : %08x\n", dev->bank1);
|
|
} else {
|
|
mfc_write(dev, dev->bank1, S5P_FIMV_MC_DRAMBASE_ADR_A);
|
|
mfc_write(dev, dev->bank2, S5P_FIMV_MC_DRAMBASE_ADR_B);
|
|
mfc_debug(2, "Bank1: %08x, Bank2: %08x\n",
|
|
dev->bank1, dev->bank2);
|
|
}
|
|
}
|
|
|
|
static inline void s5p_mfc_clear_cmds(struct s5p_mfc_dev *dev)
|
|
{
|
|
if (IS_MFCV6_PLUS(dev)) {
|
|
/* Zero initialization should be done before RESET.
|
|
* Nothing to do here. */
|
|
} else {
|
|
mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH0_INST_ID);
|
|
mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH1_INST_ID);
|
|
mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD);
|
|
mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD);
|
|
}
|
|
}
|
|
|
|
/* Initialize hardware */
|
|
int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
|
|
{
|
|
unsigned int ver;
|
|
int ret;
|
|
|
|
mfc_debug_enter();
|
|
if (!dev->fw_virt_addr) {
|
|
mfc_err("Firmware memory is not allocated.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* 0. MFC reset */
|
|
mfc_debug(2, "MFC reset..\n");
|
|
s5p_mfc_clock_on();
|
|
ret = s5p_mfc_reset(dev);
|
|
if (ret) {
|
|
mfc_err("Failed to reset MFC - timeout\n");
|
|
return ret;
|
|
}
|
|
mfc_debug(2, "Done MFC reset..\n");
|
|
/* 1. Set DRAM base Addr */
|
|
s5p_mfc_init_memctrl(dev);
|
|
/* 2. Initialize registers of channel I/F */
|
|
s5p_mfc_clear_cmds(dev);
|
|
/* 3. Release reset signal to the RISC */
|
|
s5p_mfc_clean_dev_int_flags(dev);
|
|
if (IS_MFCV6_PLUS(dev))
|
|
mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
|
|
else
|
|
mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
|
|
mfc_debug(2, "Will now wait for completion of firmware transfer\n");
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_FW_STATUS_RET)) {
|
|
mfc_err("Failed to load firmware\n");
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_clock_off();
|
|
return -EIO;
|
|
}
|
|
s5p_mfc_clean_dev_int_flags(dev);
|
|
/* 4. Initialize firmware */
|
|
ret = s5p_mfc_hw_call(dev->mfc_cmds, sys_init_cmd, dev);
|
|
if (ret) {
|
|
mfc_err("Failed to send command to MFC - timeout\n");
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_clock_off();
|
|
return ret;
|
|
}
|
|
mfc_debug(2, "Ok, now will write a command to init the system\n");
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_SYS_INIT_RET)) {
|
|
mfc_err("Failed to load firmware\n");
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_clock_off();
|
|
return -EIO;
|
|
}
|
|
dev->int_cond = 0;
|
|
if (dev->int_err != 0 || dev->int_type !=
|
|
S5P_MFC_R2H_CMD_SYS_INIT_RET) {
|
|
/* Failure. */
|
|
mfc_err("Failed to init firmware - error: %d int: %d\n",
|
|
dev->int_err, dev->int_type);
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_clock_off();
|
|
return -EIO;
|
|
}
|
|
if (IS_MFCV6_PLUS(dev))
|
|
ver = mfc_read(dev, S5P_FIMV_FW_VERSION_V6);
|
|
else
|
|
ver = mfc_read(dev, S5P_FIMV_FW_VERSION);
|
|
|
|
mfc_debug(2, "MFC F/W version : %02xyy, %02xmm, %02xdd\n",
|
|
(ver >> 16) & 0xFF, (ver >> 8) & 0xFF, ver & 0xFF);
|
|
s5p_mfc_clock_off();
|
|
mfc_debug_leave();
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Deinitialize hardware */
|
|
void s5p_mfc_deinit_hw(struct s5p_mfc_dev *dev)
|
|
{
|
|
s5p_mfc_clock_on();
|
|
|
|
s5p_mfc_reset(dev);
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_dev_context_buffer, dev);
|
|
|
|
s5p_mfc_clock_off();
|
|
}
|
|
|
|
int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
|
|
{
|
|
int ret;
|
|
|
|
mfc_debug_enter();
|
|
s5p_mfc_clock_on();
|
|
s5p_mfc_clean_dev_int_flags(dev);
|
|
ret = s5p_mfc_hw_call(dev->mfc_cmds, sleep_cmd, dev);
|
|
if (ret) {
|
|
mfc_err("Failed to send command to MFC - timeout\n");
|
|
return ret;
|
|
}
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_SLEEP_RET)) {
|
|
mfc_err("Failed to sleep\n");
|
|
return -EIO;
|
|
}
|
|
s5p_mfc_clock_off();
|
|
dev->int_cond = 0;
|
|
if (dev->int_err != 0 || dev->int_type !=
|
|
S5P_MFC_R2H_CMD_SLEEP_RET) {
|
|
/* Failure. */
|
|
mfc_err("Failed to sleep - error: %d int: %d\n", dev->int_err,
|
|
dev->int_type);
|
|
return -EIO;
|
|
}
|
|
mfc_debug_leave();
|
|
return ret;
|
|
}
|
|
|
|
int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
|
|
{
|
|
int ret;
|
|
|
|
mfc_debug_enter();
|
|
/* 0. MFC reset */
|
|
mfc_debug(2, "MFC reset..\n");
|
|
s5p_mfc_clock_on();
|
|
ret = s5p_mfc_reset(dev);
|
|
if (ret) {
|
|
mfc_err("Failed to reset MFC - timeout\n");
|
|
return ret;
|
|
}
|
|
mfc_debug(2, "Done MFC reset..\n");
|
|
/* 1. Set DRAM base Addr */
|
|
s5p_mfc_init_memctrl(dev);
|
|
/* 2. Initialize registers of channel I/F */
|
|
s5p_mfc_clear_cmds(dev);
|
|
s5p_mfc_clean_dev_int_flags(dev);
|
|
/* 3. Initialize firmware */
|
|
ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev);
|
|
if (ret) {
|
|
mfc_err("Failed to send command to MFC - timeout\n");
|
|
return ret;
|
|
}
|
|
/* 4. Release reset signal to the RISC */
|
|
if (IS_MFCV6_PLUS(dev))
|
|
mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
|
|
else
|
|
mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
|
|
mfc_debug(2, "Ok, now will write a command to wakeup the system\n");
|
|
if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) {
|
|
mfc_err("Failed to load firmware\n");
|
|
return -EIO;
|
|
}
|
|
s5p_mfc_clock_off();
|
|
dev->int_cond = 0;
|
|
if (dev->int_err != 0 || dev->int_type !=
|
|
S5P_MFC_R2H_CMD_WAKEUP_RET) {
|
|
/* Failure. */
|
|
mfc_err("Failed to wakeup - error: %d int: %d\n", dev->int_err,
|
|
dev->int_type);
|
|
return -EIO;
|
|
}
|
|
mfc_debug_leave();
|
|
return 0;
|
|
}
|
|
|
|
int s5p_mfc_open_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = s5p_mfc_hw_call(dev->mfc_ops, alloc_instance_buffer, ctx);
|
|
if (ret) {
|
|
mfc_err("Failed allocating instance buffer\n");
|
|
goto err;
|
|
}
|
|
|
|
if (ctx->type == MFCINST_DECODER) {
|
|
ret = s5p_mfc_hw_call(dev->mfc_ops,
|
|
alloc_dec_temp_buffers, ctx);
|
|
if (ret) {
|
|
mfc_err("Failed allocating temporary buffers\n");
|
|
goto err_free_inst_buf;
|
|
}
|
|
}
|
|
|
|
set_work_bit_irqsave(ctx);
|
|
s5p_mfc_clean_ctx_int_flags(ctx);
|
|
s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
|
|
if (s5p_mfc_wait_for_done_ctx(ctx,
|
|
S5P_MFC_R2H_CMD_OPEN_INSTANCE_RET, 0)) {
|
|
/* Error or timeout */
|
|
mfc_err("Error getting instance from hardware\n");
|
|
ret = -EIO;
|
|
goto err_free_desc_buf;
|
|
}
|
|
|
|
mfc_debug(2, "Got instance number: %d\n", ctx->inst_no);
|
|
return ret;
|
|
|
|
err_free_desc_buf:
|
|
if (ctx->type == MFCINST_DECODER)
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_dec_desc_buffer, ctx);
|
|
err_free_inst_buf:
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_instance_buffer, ctx);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
void s5p_mfc_close_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
|
|
{
|
|
ctx->state = MFCINST_RETURN_INST;
|
|
set_work_bit_irqsave(ctx);
|
|
s5p_mfc_clean_ctx_int_flags(ctx);
|
|
s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
|
|
/* Wait until instance is returned or timeout occurred */
|
|
if (s5p_mfc_wait_for_done_ctx(ctx,
|
|
S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET, 0))
|
|
mfc_err("Err returning instance\n");
|
|
|
|
/* Free resources */
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_codec_buffers, ctx);
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_instance_buffer, ctx);
|
|
if (ctx->type == MFCINST_DECODER)
|
|
s5p_mfc_hw_call(dev->mfc_ops, release_dec_desc_buffer, ctx);
|
|
|
|
ctx->inst_no = MFC_NO_INSTANCE_SET;
|
|
ctx->state = MFCINST_FREE;
|
|
}
|