forked from Minki/linux
e402af6caa
AT91_ID_SYS as virq is incorrect because of spare irq support which introduces NR_IRQS_LEGACY offset. It modifies rtc-at91sam9 driver in order to get irq from resources. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
1454 lines
36 KiB
C
1454 lines
36 KiB
C
/*
|
|
* arch/arm/mach-at91/at91sam9260_devices.c
|
|
*
|
|
* Copyright (C) 2006 Atmel
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c-gpio.h>
|
|
|
|
#include <linux/platform_data/at91_adc.h>
|
|
|
|
#include <mach/board.h>
|
|
#include <mach/cpu.h>
|
|
#include <mach/at91sam9260.h>
|
|
#include <mach/at91sam9260_matrix.h>
|
|
#include <mach/at91_matrix.h>
|
|
#include <mach/at91sam9_smc.h>
|
|
#include <mach/at91_adc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* USB Host
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
static u64 ohci_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_usbh_data usbh_data;
|
|
|
|
static struct resource usbh_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_UHP_BASE,
|
|
.end = AT91SAM9260_UHP_BASE + SZ_1M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91_usbh_device = {
|
|
.name = "at91_ohci",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &ohci_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &usbh_data,
|
|
},
|
|
.resource = usbh_resources,
|
|
.num_resources = ARRAY_SIZE(usbh_resources),
|
|
};
|
|
|
|
void __init at91_add_device_usbh(struct at91_usbh_data *data)
|
|
{
|
|
int i;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
/* Enable overcurrent notification */
|
|
for (i = 0; i < data->ports; i++) {
|
|
if (data->overcurrent_pin[i])
|
|
at91_set_gpio_input(data->overcurrent_pin[i], 1);
|
|
}
|
|
|
|
usbh_data = *data;
|
|
platform_device_register(&at91_usbh_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* USB Device (Gadget)
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
|
|
static struct at91_udc_data udc_data;
|
|
|
|
static struct resource udc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_UDP,
|
|
.end = AT91SAM9260_BASE_UDP + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91_udc_device = {
|
|
.name = "at91_udc",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &udc_data,
|
|
},
|
|
.resource = udc_resources,
|
|
.num_resources = ARRAY_SIZE(udc_resources),
|
|
};
|
|
|
|
void __init at91_add_device_udc(struct at91_udc_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
if (gpio_is_valid(data->vbus_pin)) {
|
|
at91_set_gpio_input(data->vbus_pin, 0);
|
|
at91_set_deglitch(data->vbus_pin, 1);
|
|
}
|
|
|
|
/* Pullup pin is handled internally by USB device peripheral */
|
|
|
|
udc_data = *data;
|
|
platform_device_register(&at91_udc_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_udc(struct at91_udc_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Ethernet
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
|
|
static u64 eth_dmamask = DMA_BIT_MASK(32);
|
|
static struct macb_platform_data eth_data;
|
|
|
|
static struct resource eth_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_EMAC,
|
|
.end = AT91SAM9260_BASE_EMAC + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_eth_device = {
|
|
.name = "macb",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = ð_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = ð_data,
|
|
},
|
|
.resource = eth_resources,
|
|
.num_resources = ARRAY_SIZE(eth_resources),
|
|
};
|
|
|
|
void __init at91_add_device_eth(struct macb_platform_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
if (gpio_is_valid(data->phy_irq_pin)) {
|
|
at91_set_gpio_input(data->phy_irq_pin, 0);
|
|
at91_set_deglitch(data->phy_irq_pin, 1);
|
|
}
|
|
|
|
/* Pins used for MII and RMII */
|
|
at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
|
|
at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
|
|
at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
|
|
at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
|
|
at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
|
|
at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
|
|
at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
|
|
at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
|
|
at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
|
|
at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
|
|
|
|
if (!data->is_rmii) {
|
|
at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
|
|
at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
|
|
at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
|
|
at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
|
|
at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
|
|
at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
|
|
at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
|
|
at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
|
|
}
|
|
|
|
eth_data = *data;
|
|
platform_device_register(&at91sam9260_eth_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_eth(struct macb_platform_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* MMC / SD
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
|
|
static u64 mmc_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_mmc_data mmc_data;
|
|
|
|
static struct resource mmc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_MCI,
|
|
.end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_mmc_device = {
|
|
.name = "at91_mci",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc_data,
|
|
},
|
|
.resource = mmc_resources,
|
|
.num_resources = ARRAY_SIZE(mmc_resources),
|
|
};
|
|
|
|
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
/* input/irq */
|
|
if (gpio_is_valid(data->det_pin)) {
|
|
at91_set_gpio_input(data->det_pin, 1);
|
|
at91_set_deglitch(data->det_pin, 1);
|
|
}
|
|
if (gpio_is_valid(data->wp_pin))
|
|
at91_set_gpio_input(data->wp_pin, 1);
|
|
if (gpio_is_valid(data->vcc_pin))
|
|
at91_set_gpio_output(data->vcc_pin, 0);
|
|
|
|
/* CLK */
|
|
at91_set_A_periph(AT91_PIN_PA8, 0);
|
|
|
|
if (data->slot_b) {
|
|
/* CMD */
|
|
at91_set_B_periph(AT91_PIN_PA1, 1);
|
|
|
|
/* DAT0, maybe DAT1..DAT3 */
|
|
at91_set_B_periph(AT91_PIN_PA0, 1);
|
|
if (data->wire4) {
|
|
at91_set_B_periph(AT91_PIN_PA5, 1);
|
|
at91_set_B_periph(AT91_PIN_PA4, 1);
|
|
at91_set_B_periph(AT91_PIN_PA3, 1);
|
|
}
|
|
} else {
|
|
/* CMD */
|
|
at91_set_A_periph(AT91_PIN_PA7, 1);
|
|
|
|
/* DAT0, maybe DAT1..DAT3 */
|
|
at91_set_A_periph(AT91_PIN_PA6, 1);
|
|
if (data->wire4) {
|
|
at91_set_A_periph(AT91_PIN_PA9, 1);
|
|
at91_set_A_periph(AT91_PIN_PA10, 1);
|
|
at91_set_A_periph(AT91_PIN_PA11, 1);
|
|
}
|
|
}
|
|
|
|
mmc_data = *data;
|
|
platform_device_register(&at91sam9260_mmc_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* MMC / SD Slot for Atmel MCI Driver
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
|
|
static u64 mmc_dmamask = DMA_BIT_MASK(32);
|
|
static struct mci_platform_data mmc_data;
|
|
|
|
static struct resource mmc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_MCI,
|
|
.end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_mmc_device = {
|
|
.name = "atmel_mci",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc_data,
|
|
},
|
|
.resource = mmc_resources,
|
|
.num_resources = ARRAY_SIZE(mmc_resources),
|
|
};
|
|
|
|
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
|
|
{
|
|
unsigned int i;
|
|
unsigned int slot_count = 0;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
|
|
if (data->slot[i].bus_width) {
|
|
/* input/irq */
|
|
if (gpio_is_valid(data->slot[i].detect_pin)) {
|
|
at91_set_gpio_input(data->slot[i].detect_pin, 1);
|
|
at91_set_deglitch(data->slot[i].detect_pin, 1);
|
|
}
|
|
if (gpio_is_valid(data->slot[i].wp_pin))
|
|
at91_set_gpio_input(data->slot[i].wp_pin, 1);
|
|
|
|
switch (i) {
|
|
case 0:
|
|
/* CMD */
|
|
at91_set_A_periph(AT91_PIN_PA7, 1);
|
|
/* DAT0, maybe DAT1..DAT3 */
|
|
at91_set_A_periph(AT91_PIN_PA6, 1);
|
|
if (data->slot[i].bus_width == 4) {
|
|
at91_set_A_periph(AT91_PIN_PA9, 1);
|
|
at91_set_A_periph(AT91_PIN_PA10, 1);
|
|
at91_set_A_periph(AT91_PIN_PA11, 1);
|
|
}
|
|
slot_count++;
|
|
break;
|
|
case 1:
|
|
/* CMD */
|
|
at91_set_B_periph(AT91_PIN_PA1, 1);
|
|
/* DAT0, maybe DAT1..DAT3 */
|
|
at91_set_B_periph(AT91_PIN_PA0, 1);
|
|
if (data->slot[i].bus_width == 4) {
|
|
at91_set_B_periph(AT91_PIN_PA5, 1);
|
|
at91_set_B_periph(AT91_PIN_PA4, 1);
|
|
at91_set_B_periph(AT91_PIN_PA3, 1);
|
|
}
|
|
slot_count++;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR
|
|
"AT91: SD/MMC slot %d not available\n", i);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (slot_count) {
|
|
/* CLK */
|
|
at91_set_A_periph(AT91_PIN_PA8, 0);
|
|
|
|
mmc_data = *data;
|
|
platform_device_register(&at91sam9260_mmc_device);
|
|
}
|
|
}
|
|
#else
|
|
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* NAND / SmartMedia
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
|
|
static struct atmel_nand_data nand_data;
|
|
|
|
#define NAND_BASE AT91_CHIPSELECT_3
|
|
|
|
static struct resource nand_resources[] = {
|
|
[0] = {
|
|
.start = NAND_BASE,
|
|
.end = NAND_BASE + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AT91SAM9260_BASE_ECC,
|
|
.end = AT91SAM9260_BASE_ECC + SZ_512 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device at91sam9260_nand_device = {
|
|
.name = "atmel_nand",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &nand_data,
|
|
},
|
|
.resource = nand_resources,
|
|
.num_resources = ARRAY_SIZE(nand_resources),
|
|
};
|
|
|
|
void __init at91_add_device_nand(struct atmel_nand_data *data)
|
|
{
|
|
unsigned long csa;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
csa = at91_matrix_read(AT91_MATRIX_EBICSA);
|
|
at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
|
|
|
|
/* enable pin */
|
|
if (gpio_is_valid(data->enable_pin))
|
|
at91_set_gpio_output(data->enable_pin, 1);
|
|
|
|
/* ready/busy pin */
|
|
if (gpio_is_valid(data->rdy_pin))
|
|
at91_set_gpio_input(data->rdy_pin, 1);
|
|
|
|
/* card detect pin */
|
|
if (gpio_is_valid(data->det_pin))
|
|
at91_set_gpio_input(data->det_pin, 1);
|
|
|
|
nand_data = *data;
|
|
platform_device_register(&at91sam9260_nand_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* TWI (i2c)
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Prefer the GPIO code since the TWI controller isn't robust
|
|
* (gets overruns and underruns under load) and can only issue
|
|
* repeated STARTs in one scenario (the driver doesn't yet handle them).
|
|
*/
|
|
|
|
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
|
|
|
|
static struct i2c_gpio_platform_data pdata = {
|
|
.sda_pin = AT91_PIN_PA23,
|
|
.sda_is_open_drain = 1,
|
|
.scl_pin = AT91_PIN_PA24,
|
|
.scl_is_open_drain = 1,
|
|
.udelay = 2, /* ~100 kHz */
|
|
};
|
|
|
|
static struct platform_device at91sam9260_twi_device = {
|
|
.name = "i2c-gpio",
|
|
.id = -1,
|
|
.dev.platform_data = &pdata,
|
|
};
|
|
|
|
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
|
|
{
|
|
at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
|
|
at91_set_multi_drive(AT91_PIN_PA23, 1);
|
|
|
|
at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
|
|
at91_set_multi_drive(AT91_PIN_PA24, 1);
|
|
|
|
i2c_register_board_info(0, devices, nr_devices);
|
|
platform_device_register(&at91sam9260_twi_device);
|
|
}
|
|
|
|
#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
|
|
|
|
static struct resource twi_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_TWI,
|
|
.end = AT91SAM9260_BASE_TWI + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_twi_device = {
|
|
.name = "at91_i2c",
|
|
.id = -1,
|
|
.resource = twi_resources,
|
|
.num_resources = ARRAY_SIZE(twi_resources),
|
|
};
|
|
|
|
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
|
|
{
|
|
/* pins used for TWI interface */
|
|
at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
|
|
at91_set_multi_drive(AT91_PIN_PA23, 1);
|
|
|
|
at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
|
|
at91_set_multi_drive(AT91_PIN_PA24, 1);
|
|
|
|
i2c_register_board_info(0, devices, nr_devices);
|
|
platform_device_register(&at91sam9260_twi_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SPI
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
|
static u64 spi_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource spi0_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_SPI0,
|
|
.end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_spi0_device = {
|
|
.name = "atmel_spi",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi0_resources,
|
|
.num_resources = ARRAY_SIZE(spi0_resources),
|
|
};
|
|
|
|
static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
|
|
|
|
static struct resource spi1_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_SPI1,
|
|
.end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_spi1_device = {
|
|
.name = "atmel_spi",
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi1_resources,
|
|
.num_resources = ARRAY_SIZE(spi1_resources),
|
|
};
|
|
|
|
static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
|
|
|
|
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
|
|
{
|
|
int i;
|
|
unsigned long cs_pin;
|
|
short enable_spi0 = 0;
|
|
short enable_spi1 = 0;
|
|
|
|
/* Choose SPI chip-selects */
|
|
for (i = 0; i < nr_devices; i++) {
|
|
if (devices[i].controller_data)
|
|
cs_pin = (unsigned long) devices[i].controller_data;
|
|
else if (devices[i].bus_num == 0)
|
|
cs_pin = spi0_standard_cs[devices[i].chip_select];
|
|
else
|
|
cs_pin = spi1_standard_cs[devices[i].chip_select];
|
|
|
|
if (!gpio_is_valid(cs_pin))
|
|
continue;
|
|
|
|
if (devices[i].bus_num == 0)
|
|
enable_spi0 = 1;
|
|
else
|
|
enable_spi1 = 1;
|
|
|
|
/* enable chip-select pin */
|
|
at91_set_gpio_output(cs_pin, 1);
|
|
|
|
/* pass chip-select pin to driver */
|
|
devices[i].controller_data = (void *) cs_pin;
|
|
}
|
|
|
|
spi_register_board_info(devices, nr_devices);
|
|
|
|
/* Configure SPI bus(es) */
|
|
if (enable_spi0) {
|
|
at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
|
|
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
|
|
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
|
|
|
|
platform_device_register(&at91sam9260_spi0_device);
|
|
}
|
|
if (enable_spi1) {
|
|
at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
|
|
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
|
|
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
|
|
|
|
platform_device_register(&at91sam9260_spi1_device);
|
|
}
|
|
}
|
|
#else
|
|
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Timer/Counter blocks
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_ATMEL_TCLIB
|
|
|
|
static struct resource tcb0_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_TCB0,
|
|
.end = AT91SAM9260_BASE_TCB0 + SZ_256 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_tcb0_device = {
|
|
.name = "atmel_tcb",
|
|
.id = 0,
|
|
.resource = tcb0_resources,
|
|
.num_resources = ARRAY_SIZE(tcb0_resources),
|
|
};
|
|
|
|
static struct resource tcb1_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_TCB1,
|
|
.end = AT91SAM9260_BASE_TCB1 + SZ_256 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_tcb1_device = {
|
|
.name = "atmel_tcb",
|
|
.id = 1,
|
|
.resource = tcb1_resources,
|
|
.num_resources = ARRAY_SIZE(tcb1_resources),
|
|
};
|
|
|
|
static void __init at91_add_device_tc(void)
|
|
{
|
|
platform_device_register(&at91sam9260_tcb0_device);
|
|
platform_device_register(&at91sam9260_tcb1_device);
|
|
}
|
|
#else
|
|
static void __init at91_add_device_tc(void) { }
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* RTT
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct resource rtt_resources[] = {
|
|
{
|
|
.start = AT91SAM9260_BASE_RTT,
|
|
.end = AT91SAM9260_BASE_RTT + SZ_16 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_rtt_device = {
|
|
.name = "at91_rtt",
|
|
.id = 0,
|
|
.resource = rtt_resources,
|
|
};
|
|
|
|
|
|
#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
|
|
static void __init at91_add_device_rtt_rtc(void)
|
|
{
|
|
at91sam9260_rtt_device.name = "rtc-at91sam9";
|
|
/*
|
|
* The second resource is needed:
|
|
* GPBR will serve as the storage for RTC time offset
|
|
*/
|
|
at91sam9260_rtt_device.num_resources = 3;
|
|
rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
|
|
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
|
|
rtt_resources[1].end = rtt_resources[1].start + 3;
|
|
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
|
|
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
|
|
}
|
|
#else
|
|
static void __init at91_add_device_rtt_rtc(void)
|
|
{
|
|
/* Only one resource is needed: RTT not used as RTC */
|
|
at91sam9260_rtt_device.num_resources = 1;
|
|
}
|
|
#endif
|
|
|
|
static void __init at91_add_device_rtt(void)
|
|
{
|
|
at91_add_device_rtt_rtc();
|
|
platform_device_register(&at91sam9260_rtt_device);
|
|
}
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Watchdog
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
|
|
static struct resource wdt_resources[] = {
|
|
{
|
|
.start = AT91SAM9260_BASE_WDT,
|
|
.end = AT91SAM9260_BASE_WDT + SZ_16 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device at91sam9260_wdt_device = {
|
|
.name = "at91_wdt",
|
|
.id = -1,
|
|
.resource = wdt_resources,
|
|
.num_resources = ARRAY_SIZE(wdt_resources),
|
|
};
|
|
|
|
static void __init at91_add_device_watchdog(void)
|
|
{
|
|
platform_device_register(&at91sam9260_wdt_device);
|
|
}
|
|
#else
|
|
static void __init at91_add_device_watchdog(void) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SSC -- Synchronous Serial Controller
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
|
|
static u64 ssc_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource ssc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_SSC,
|
|
.end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91sam9260_ssc_device = {
|
|
.name = "ssc",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &ssc_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = ssc_resources,
|
|
.num_resources = ARRAY_SIZE(ssc_resources),
|
|
};
|
|
|
|
static inline void configure_ssc_pins(unsigned pins)
|
|
{
|
|
if (pins & ATMEL_SSC_TF)
|
|
at91_set_A_periph(AT91_PIN_PB17, 1);
|
|
if (pins & ATMEL_SSC_TK)
|
|
at91_set_A_periph(AT91_PIN_PB16, 1);
|
|
if (pins & ATMEL_SSC_TD)
|
|
at91_set_A_periph(AT91_PIN_PB18, 1);
|
|
if (pins & ATMEL_SSC_RD)
|
|
at91_set_A_periph(AT91_PIN_PB19, 1);
|
|
if (pins & ATMEL_SSC_RK)
|
|
at91_set_A_periph(AT91_PIN_PB20, 1);
|
|
if (pins & ATMEL_SSC_RF)
|
|
at91_set_A_periph(AT91_PIN_PB21, 1);
|
|
}
|
|
|
|
/*
|
|
* SSC controllers are accessed through library code, instead of any
|
|
* kind of all-singing/all-dancing driver. For example one could be
|
|
* used by a particular I2S audio codec's driver, while another one
|
|
* on the same system might be used by a custom data capture driver.
|
|
*/
|
|
void __init at91_add_device_ssc(unsigned id, unsigned pins)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
/*
|
|
* NOTE: caller is responsible for passing information matching
|
|
* "pins" to whatever will be using each particular controller.
|
|
*/
|
|
switch (id) {
|
|
case AT91SAM9260_ID_SSC:
|
|
pdev = &at91sam9260_ssc_device;
|
|
configure_ssc_pins(pins);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
platform_device_register(pdev);
|
|
}
|
|
|
|
#else
|
|
void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
|
|
#endif
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* UART
|
|
* -------------------------------------------------------------------- */
|
|
#if defined(CONFIG_SERIAL_ATMEL)
|
|
static struct resource dbgu_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_DBGU,
|
|
.end = AT91SAM9260_BASE_DBGU + SZ_512 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91_ID_SYS,
|
|
.end = NR_IRQS_LEGACY + AT91_ID_SYS,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data dbgu_data = {
|
|
.use_dma_tx = 0,
|
|
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
|
|
};
|
|
|
|
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_dbgu_device = {
|
|
.name = "atmel_usart",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &dbgu_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &dbgu_data,
|
|
},
|
|
.resource = dbgu_resources,
|
|
.num_resources = ARRAY_SIZE(dbgu_resources),
|
|
};
|
|
|
|
static inline void configure_dbgu_pins(void)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
|
|
at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
|
|
}
|
|
|
|
static struct resource uart0_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_US0,
|
|
.end = AT91SAM9260_BASE_US0 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart0_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart0_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart0_device = {
|
|
.name = "atmel_usart",
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &uart0_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart0_data,
|
|
},
|
|
.resource = uart0_resources,
|
|
.num_resources = ARRAY_SIZE(uart0_resources),
|
|
};
|
|
|
|
static inline void configure_usart0_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
|
|
if (pins & ATMEL_UART_DTR)
|
|
at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
|
|
if (pins & ATMEL_UART_DSR)
|
|
at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
|
|
if (pins & ATMEL_UART_DCD)
|
|
at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
|
|
if (pins & ATMEL_UART_RI)
|
|
at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
|
|
}
|
|
|
|
static struct resource uart1_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_US1,
|
|
.end = AT91SAM9260_BASE_US1 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart1_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart1_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart1_device = {
|
|
.name = "atmel_usart",
|
|
.id = 2,
|
|
.dev = {
|
|
.dma_mask = &uart1_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart1_data,
|
|
},
|
|
.resource = uart1_resources,
|
|
.num_resources = ARRAY_SIZE(uart1_resources),
|
|
};
|
|
|
|
static inline void configure_usart1_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
|
|
}
|
|
|
|
static struct resource uart2_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_US2,
|
|
.end = AT91SAM9260_BASE_US2 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart2_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart2_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart2_device = {
|
|
.name = "atmel_usart",
|
|
.id = 3,
|
|
.dev = {
|
|
.dma_mask = &uart2_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart2_data,
|
|
},
|
|
.resource = uart2_resources,
|
|
.num_resources = ARRAY_SIZE(uart2_resources),
|
|
};
|
|
|
|
static inline void configure_usart2_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
|
|
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
|
|
}
|
|
|
|
static struct resource uart3_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_US3,
|
|
.end = AT91SAM9260_BASE_US3 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart3_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart3_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart3_device = {
|
|
.name = "atmel_usart",
|
|
.id = 4,
|
|
.dev = {
|
|
.dma_mask = &uart3_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart3_data,
|
|
},
|
|
.resource = uart3_resources,
|
|
.num_resources = ARRAY_SIZE(uart3_resources),
|
|
};
|
|
|
|
static inline void configure_usart3_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
|
|
at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
|
|
}
|
|
|
|
static struct resource uart4_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_US4,
|
|
.end = AT91SAM9260_BASE_US4 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart4_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart4_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart4_device = {
|
|
.name = "atmel_usart",
|
|
.id = 5,
|
|
.dev = {
|
|
.dma_mask = &uart4_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart4_data,
|
|
},
|
|
.resource = uart4_resources,
|
|
.num_resources = ARRAY_SIZE(uart4_resources),
|
|
};
|
|
|
|
static inline void configure_usart4_pins(void)
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
|
|
at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
|
|
}
|
|
|
|
static struct resource uart5_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_US5,
|
|
.end = AT91SAM9260_BASE_US5 + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct atmel_uart_data uart5_data = {
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
|
|
static u64 uart5_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart5_device = {
|
|
.name = "atmel_usart",
|
|
.id = 6,
|
|
.dev = {
|
|
.dma_mask = &uart5_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &uart5_data,
|
|
},
|
|
.resource = uart5_resources,
|
|
.num_resources = ARRAY_SIZE(uart5_resources),
|
|
};
|
|
|
|
static inline void configure_usart5_pins(void)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
|
|
at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
|
|
}
|
|
|
|
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
|
|
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
|
{
|
|
struct platform_device *pdev;
|
|
struct atmel_uart_data *pdata;
|
|
|
|
switch (id) {
|
|
case 0: /* DBGU */
|
|
pdev = &at91sam9260_dbgu_device;
|
|
configure_dbgu_pins();
|
|
break;
|
|
case AT91SAM9260_ID_US0:
|
|
pdev = &at91sam9260_uart0_device;
|
|
configure_usart0_pins(pins);
|
|
break;
|
|
case AT91SAM9260_ID_US1:
|
|
pdev = &at91sam9260_uart1_device;
|
|
configure_usart1_pins(pins);
|
|
break;
|
|
case AT91SAM9260_ID_US2:
|
|
pdev = &at91sam9260_uart2_device;
|
|
configure_usart2_pins(pins);
|
|
break;
|
|
case AT91SAM9260_ID_US3:
|
|
pdev = &at91sam9260_uart3_device;
|
|
configure_usart3_pins(pins);
|
|
break;
|
|
case AT91SAM9260_ID_US4:
|
|
pdev = &at91sam9260_uart4_device;
|
|
configure_usart4_pins();
|
|
break;
|
|
case AT91SAM9260_ID_US5:
|
|
pdev = &at91sam9260_uart5_device;
|
|
configure_usart5_pins();
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
pdata = pdev->dev.platform_data;
|
|
pdata->num = portnr; /* update to mapped ID */
|
|
|
|
if (portnr < ATMEL_MAX_UART)
|
|
at91_uarts[portnr] = pdev;
|
|
}
|
|
|
|
void __init at91_add_device_serial(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ATMEL_MAX_UART; i++) {
|
|
if (at91_uarts[i])
|
|
platform_device_register(at91_uarts[i]);
|
|
}
|
|
}
|
|
#else
|
|
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
|
|
void __init at91_add_device_serial(void) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* CF/IDE
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
|
|
defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
|
|
|
|
static struct at91_cf_data cf0_data;
|
|
|
|
static struct resource cf0_resources[] = {
|
|
[0] = {
|
|
.start = AT91_CHIPSELECT_4,
|
|
.end = AT91_CHIPSELECT_4 + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device cf0_device = {
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &cf0_data,
|
|
},
|
|
.resource = cf0_resources,
|
|
.num_resources = ARRAY_SIZE(cf0_resources),
|
|
};
|
|
|
|
static struct at91_cf_data cf1_data;
|
|
|
|
static struct resource cf1_resources[] = {
|
|
[0] = {
|
|
.start = AT91_CHIPSELECT_5,
|
|
.end = AT91_CHIPSELECT_5 + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device cf1_device = {
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &cf1_data,
|
|
},
|
|
.resource = cf1_resources,
|
|
.num_resources = ARRAY_SIZE(cf1_resources),
|
|
};
|
|
|
|
void __init at91_add_device_cf(struct at91_cf_data *data)
|
|
{
|
|
struct platform_device *pdev;
|
|
unsigned long csa;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
csa = at91_matrix_read(AT91_MATRIX_EBICSA);
|
|
|
|
switch (data->chipselect) {
|
|
case 4:
|
|
at91_set_multi_drive(AT91_PIN_PC8, 0);
|
|
at91_set_A_periph(AT91_PIN_PC8, 0);
|
|
csa |= AT91_MATRIX_CS4A_SMC_CF1;
|
|
cf0_data = *data;
|
|
pdev = &cf0_device;
|
|
break;
|
|
case 5:
|
|
at91_set_multi_drive(AT91_PIN_PC9, 0);
|
|
at91_set_A_periph(AT91_PIN_PC9, 0);
|
|
csa |= AT91_MATRIX_CS5A_SMC_CF2;
|
|
cf1_data = *data;
|
|
pdev = &cf1_device;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
|
|
data->chipselect);
|
|
return;
|
|
}
|
|
|
|
at91_matrix_write(AT91_MATRIX_EBICSA, csa);
|
|
|
|
if (gpio_is_valid(data->rst_pin)) {
|
|
at91_set_multi_drive(data->rst_pin, 0);
|
|
at91_set_gpio_output(data->rst_pin, 1);
|
|
}
|
|
|
|
if (gpio_is_valid(data->irq_pin)) {
|
|
at91_set_gpio_input(data->irq_pin, 0);
|
|
at91_set_deglitch(data->irq_pin, 1);
|
|
}
|
|
|
|
if (gpio_is_valid(data->det_pin)) {
|
|
at91_set_gpio_input(data->det_pin, 0);
|
|
at91_set_deglitch(data->det_pin, 1);
|
|
}
|
|
|
|
at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */
|
|
at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */
|
|
at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */
|
|
at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */
|
|
|
|
if (data->flags & AT91_CF_TRUE_IDE)
|
|
#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
|
|
pdev->name = "pata_at91";
|
|
#else
|
|
#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
|
|
#endif
|
|
else
|
|
pdev->name = "at91_cf";
|
|
|
|
platform_device_register(pdev);
|
|
}
|
|
|
|
#else
|
|
void __init at91_add_device_cf(struct at91_cf_data * data) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* ADCs
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if IS_ENABLED(CONFIG_AT91_ADC)
|
|
static struct at91_adc_data adc_data;
|
|
|
|
static struct resource adc_resources[] = {
|
|
[0] = {
|
|
.start = AT91SAM9260_BASE_ADC,
|
|
.end = AT91SAM9260_BASE_ADC + SZ_16K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC,
|
|
.end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device at91_adc_device = {
|
|
.name = "at91_adc",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &adc_data,
|
|
},
|
|
.resource = adc_resources,
|
|
.num_resources = ARRAY_SIZE(adc_resources),
|
|
};
|
|
|
|
static struct at91_adc_trigger at91_adc_triggers[] = {
|
|
[0] = {
|
|
.name = "timer-counter-0",
|
|
.value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN,
|
|
},
|
|
[1] = {
|
|
.name = "timer-counter-1",
|
|
.value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN,
|
|
},
|
|
[2] = {
|
|
.name = "timer-counter-2",
|
|
.value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN,
|
|
},
|
|
[3] = {
|
|
.name = "external",
|
|
.value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN,
|
|
.is_external = true,
|
|
},
|
|
};
|
|
|
|
static struct at91_adc_reg_desc at91_adc_register_g20 = {
|
|
.channel_base = AT91_ADC_CHR(0),
|
|
.drdy_mask = AT91_ADC_DRDY,
|
|
.status_register = AT91_ADC_SR,
|
|
.trigger_register = AT91_ADC_MR,
|
|
};
|
|
|
|
void __init at91_add_device_adc(struct at91_adc_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
if (test_bit(0, &data->channels_used))
|
|
at91_set_A_periph(AT91_PIN_PC0, 0);
|
|
if (test_bit(1, &data->channels_used))
|
|
at91_set_A_periph(AT91_PIN_PC1, 0);
|
|
if (test_bit(2, &data->channels_used))
|
|
at91_set_A_periph(AT91_PIN_PC2, 0);
|
|
if (test_bit(3, &data->channels_used))
|
|
at91_set_A_periph(AT91_PIN_PC3, 0);
|
|
|
|
if (data->use_external_triggers)
|
|
at91_set_A_periph(AT91_PIN_PA22, 0);
|
|
|
|
data->num_channels = 4;
|
|
data->startup_time = 10;
|
|
data->registers = &at91_adc_register_g20;
|
|
data->trigger_number = 4;
|
|
data->trigger_list = at91_adc_triggers;
|
|
|
|
adc_data = *data;
|
|
platform_device_register(&at91_adc_device);
|
|
}
|
|
#else
|
|
void __init at91_add_device_adc(struct at91_adc_data *data) {}
|
|
#endif
|
|
|
|
/* -------------------------------------------------------------------- */
|
|
/*
|
|
* These devices are always present and don't need any board-specific
|
|
* setup.
|
|
*/
|
|
static int __init at91_add_standard_devices(void)
|
|
{
|
|
if (of_have_populated_dt())
|
|
return 0;
|
|
|
|
at91_add_device_rtt();
|
|
at91_add_device_watchdog();
|
|
at91_add_device_tc();
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(at91_add_standard_devices);
|