linux/Documentation/Makefile
Mauro Carvalho Chehab baeb2d5cb8 docs: Makefile: place final pdf docs on a separate dir
The Sphinx build system for PDF is too complex and generate
lots of ancillary files, including one PDF file for each
image.

So, at the end, the main latex dir has 156 pdf files, instead
of the 71 ones that would match each generated book. That's
confusing and it makes harder to identify when something didn't
work.

So, instead, let's move the final PDF output(s) to a separate
dir. This way, the latex/ dir will have the temporary and the
final *.tex files, while the final pdf files that built ok
will be under the pdf/ directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/832752cbc9678a6e8d3d634bc3356d655d44684f.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-04-20 15:45:41 -06:00

149 lines
5.4 KiB
Makefile

# -*- makefile -*-
# Makefile for Sphinx documentation
#
# for cleaning
subdir- := devicetree/bindings
# Check for broken documentation file references
ifeq ($(CONFIG_WARN_MISSING_DOCUMENTS),y)
$(shell $(srctree)/scripts/documentation-file-ref-check --warn)
endif
# You can set these variables from the command line.
SPHINXBUILD = sphinx-build
SPHINXOPTS =
SPHINXDIRS = .
_SPHINXDIRS = $(sort $(patsubst $(srctree)/Documentation/%/index.rst,%,$(wildcard $(srctree)/Documentation/*/index.rst)))
SPHINX_CONF = conf.py
PAPER =
BUILDDIR = $(obj)/output
PDFLATEX = xelatex
LATEXOPTS = -interaction=batchmode
# User-friendly check for sphinx-build
HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
ifeq ($(HAVE_SPHINX),0)
.DEFAULT:
$(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
@echo
@$(srctree)/scripts/sphinx-pre-install
@echo " SKIP Sphinx $@ target."
else # HAVE_SPHINX
# User-friendly check for pdflatex and latexmk
HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi)
HAVE_LATEXMK := $(shell if which latexmk >/dev/null 2>&1; then echo 1; else echo 0; fi)
ifeq ($(HAVE_LATEXMK),1)
PDFLATEX := latexmk -$(PDFLATEX)
endif #HAVE_LATEXMK
# Internal variables.
PAPEROPT_a4 = -D latex_paper_size=a4
PAPEROPT_letter = -D latex_paper_size=letter
KERNELDOC = $(srctree)/scripts/kernel-doc
KERNELDOC_CONF = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
ALLSPHINXOPTS = $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
# the i18n builder cannot share the environment and doctrees with the others
I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
# commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
# $2 sphinx builder e.g. "html"
# $3 name of the build subfolder / e.g. "media", used as:
# * dest folder relative to $(BUILDDIR) and
# * cache folder relative to $(BUILDDIR)/.doctrees
# $4 dest subfolder e.g. "man" for man pages at media/man
# $5 reST source folder relative to $(srctree)/$(src),
# e.g. "media" for the linux-tv book-set at ./Documentation/media
quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2 && \
PYTHONDONTWRITEBYTECODE=1 \
BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
$(PYTHON) $(srctree)/scripts/jobserver-exec \
$(SHELL) $(srctree)/Documentation/sphinx/parallel-wrapper.sh \
$(SPHINXBUILD) \
-b $2 \
-c $(abspath $(srctree)/$(src)) \
-d $(abspath $(BUILDDIR)/.doctrees/$3) \
-D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
$(ALLSPHINXOPTS) \
$(abspath $(srctree)/$(src)/$5) \
$(abspath $(BUILDDIR)/$3/$4)
htmldocs:
@$(srctree)/scripts/sphinx-pre-install --version-check
@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
linkcheckdocs:
@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var)))
latexdocs:
@$(srctree)/scripts/sphinx-pre-install --version-check
@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
ifeq ($(HAVE_PDFLATEX),0)
pdfdocs:
$(warning The '$(PDFLATEX)' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
@echo " SKIP Sphinx $@ target."
else # HAVE_PDFLATEX
pdfdocs: latexdocs
@$(srctree)/scripts/sphinx-pre-install --version-check
$(foreach var,$(SPHINXDIRS), \
$(MAKE) PDFLATEX="$(PDFLATEX)" LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit; \
mkdir -p $(BUILDDIR)/$(var)/pdf; \
mv $(subst .tex,.pdf,$(wildcard $(BUILDDIR)/$(var)/latex/*.tex)) $(BUILDDIR)/$(var)/pdf/; \
)
endif # HAVE_PDFLATEX
epubdocs:
@$(srctree)/scripts/sphinx-pre-install --version-check
@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
xmldocs:
@$(srctree)/scripts/sphinx-pre-install --version-check
@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
endif # HAVE_SPHINX
# The following targets are independent of HAVE_SPHINX, and the rules should
# work or silently pass without Sphinx.
refcheckdocs:
$(Q)cd $(srctree);scripts/documentation-file-ref-check
cleandocs:
$(Q)rm -rf $(BUILDDIR)
$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean
dochelp:
@echo ' Linux kernel internal documentation in different formats from ReST:'
@echo ' htmldocs - HTML'
@echo ' latexdocs - LaTeX'
@echo ' pdfdocs - PDF'
@echo ' epubdocs - EPUB'
@echo ' xmldocs - XML'
@echo ' linkcheckdocs - check for broken external links'
@echo ' (will connect to external hosts)'
@echo ' refcheckdocs - check for references to non-existing files under'
@echo ' Documentation'
@echo ' cleandocs - clean all generated files'
@echo
@echo ' make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
@echo ' valid values for SPHINXDIRS are: $(_SPHINXDIRS)'
@echo
@echo ' make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
@echo ' configuration. This is e.g. useful to build with nit-picking config.'
@echo
@echo ' Default location for the generated documents is Documentation/output'