forked from Minki/linux
901b74a3c4
The gpio_request_one() flags parameter was set to: GPIOF_DIR_OUT | !!brightness GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below: GPIOF_DIR_OUT (0 << 0) GPIOF_DIR_IN (1 << 0) So, when '!!brightness' is 1, the gpio pin can be set as input, instead of output. To prevent this problem, GPIOF_OUT_INIT flags should be used when using gpio_request_one(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
338 lines
8.8 KiB
C
338 lines
8.8 KiB
C
/*
|
|
* LED control using Renesas TPU
|
|
*
|
|
* Copyright (C) 2011 Magnus Damm
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/printk.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/platform_data/leds-renesas-tpu.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
enum r_tpu_pin { R_TPU_PIN_UNUSED, R_TPU_PIN_GPIO, R_TPU_PIN_GPIO_FN };
|
|
enum r_tpu_timer { R_TPU_TIMER_UNUSED, R_TPU_TIMER_ON };
|
|
|
|
struct r_tpu_priv {
|
|
struct led_classdev ldev;
|
|
void __iomem *mapbase;
|
|
struct clk *clk;
|
|
struct platform_device *pdev;
|
|
enum r_tpu_pin pin_state;
|
|
enum r_tpu_timer timer_state;
|
|
unsigned long min_rate;
|
|
unsigned int refresh_rate;
|
|
struct work_struct work;
|
|
enum led_brightness new_brightness;
|
|
};
|
|
|
|
static DEFINE_SPINLOCK(r_tpu_lock);
|
|
|
|
#define TSTR -1 /* Timer start register (shared register) */
|
|
#define TCR 0 /* Timer control register (+0x00) */
|
|
#define TMDR 1 /* Timer mode register (+0x04) */
|
|
#define TIOR 2 /* Timer I/O control register (+0x08) */
|
|
#define TIER 3 /* Timer interrupt enable register (+0x0c) */
|
|
#define TSR 4 /* Timer status register (+0x10) */
|
|
#define TCNT 5 /* Timer counter (+0x14) */
|
|
#define TGRA 6 /* Timer general register A (+0x18) */
|
|
#define TGRB 7 /* Timer general register B (+0x1c) */
|
|
#define TGRC 8 /* Timer general register C (+0x20) */
|
|
#define TGRD 9 /* Timer general register D (+0x24) */
|
|
|
|
static inline unsigned short r_tpu_read(struct r_tpu_priv *p, int reg_nr)
|
|
{
|
|
struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
|
|
void __iomem *base = p->mapbase;
|
|
unsigned long offs = reg_nr << 2;
|
|
|
|
if (reg_nr == TSTR)
|
|
return ioread16(base - cfg->channel_offset);
|
|
|
|
return ioread16(base + offs);
|
|
}
|
|
|
|
static inline void r_tpu_write(struct r_tpu_priv *p, int reg_nr,
|
|
unsigned short value)
|
|
{
|
|
struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
|
|
void __iomem *base = p->mapbase;
|
|
unsigned long offs = reg_nr << 2;
|
|
|
|
if (reg_nr == TSTR) {
|
|
iowrite16(value, base - cfg->channel_offset);
|
|
return;
|
|
}
|
|
|
|
iowrite16(value, base + offs);
|
|
}
|
|
|
|
static void r_tpu_start_stop_ch(struct r_tpu_priv *p, int start)
|
|
{
|
|
struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
|
|
unsigned long flags, value;
|
|
|
|
/* start stop register shared by multiple timer channels */
|
|
spin_lock_irqsave(&r_tpu_lock, flags);
|
|
value = r_tpu_read(p, TSTR);
|
|
|
|
if (start)
|
|
value |= 1 << cfg->timer_bit;
|
|
else
|
|
value &= ~(1 << cfg->timer_bit);
|
|
|
|
r_tpu_write(p, TSTR, value);
|
|
spin_unlock_irqrestore(&r_tpu_lock, flags);
|
|
}
|
|
|
|
static int r_tpu_enable(struct r_tpu_priv *p, enum led_brightness brightness)
|
|
{
|
|
struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
|
|
int prescaler[] = { 1, 4, 16, 64 };
|
|
int k, ret;
|
|
unsigned long rate, tmp;
|
|
|
|
if (p->timer_state == R_TPU_TIMER_ON)
|
|
return 0;
|
|
|
|
/* wake up device and enable clock */
|
|
pm_runtime_get_sync(&p->pdev->dev);
|
|
ret = clk_enable(p->clk);
|
|
if (ret) {
|
|
dev_err(&p->pdev->dev, "cannot enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
/* make sure channel is disabled */
|
|
r_tpu_start_stop_ch(p, 0);
|
|
|
|
/* get clock rate after enabling it */
|
|
rate = clk_get_rate(p->clk);
|
|
|
|
/* pick the lowest acceptable rate */
|
|
for (k = ARRAY_SIZE(prescaler) - 1; k >= 0; k--)
|
|
if ((rate / prescaler[k]) >= p->min_rate)
|
|
break;
|
|
|
|
if (k < 0) {
|
|
dev_err(&p->pdev->dev, "clock rate mismatch\n");
|
|
goto err0;
|
|
}
|
|
dev_dbg(&p->pdev->dev, "rate = %lu, prescaler %u\n",
|
|
rate, prescaler[k]);
|
|
|
|
/* clear TCNT on TGRB match, count on rising edge, set prescaler */
|
|
r_tpu_write(p, TCR, 0x0040 | k);
|
|
|
|
/* output 0 until TGRA, output 1 until TGRB */
|
|
r_tpu_write(p, TIOR, 0x0002);
|
|
|
|
rate /= prescaler[k] * p->refresh_rate;
|
|
r_tpu_write(p, TGRB, rate);
|
|
dev_dbg(&p->pdev->dev, "TRGB = 0x%04lx\n", rate);
|
|
|
|
tmp = (cfg->max_brightness - brightness) * rate;
|
|
r_tpu_write(p, TGRA, tmp / cfg->max_brightness);
|
|
dev_dbg(&p->pdev->dev, "TRGA = 0x%04lx\n", tmp / cfg->max_brightness);
|
|
|
|
/* PWM mode */
|
|
r_tpu_write(p, TMDR, 0x0002);
|
|
|
|
/* enable channel */
|
|
r_tpu_start_stop_ch(p, 1);
|
|
|
|
p->timer_state = R_TPU_TIMER_ON;
|
|
return 0;
|
|
err0:
|
|
clk_disable(p->clk);
|
|
pm_runtime_put_sync(&p->pdev->dev);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static void r_tpu_disable(struct r_tpu_priv *p)
|
|
{
|
|
if (p->timer_state == R_TPU_TIMER_UNUSED)
|
|
return;
|
|
|
|
/* disable channel */
|
|
r_tpu_start_stop_ch(p, 0);
|
|
|
|
/* stop clock and mark device as idle */
|
|
clk_disable(p->clk);
|
|
pm_runtime_put_sync(&p->pdev->dev);
|
|
|
|
p->timer_state = R_TPU_TIMER_UNUSED;
|
|
}
|
|
|
|
static void r_tpu_set_pin(struct r_tpu_priv *p, enum r_tpu_pin new_state,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct led_renesas_tpu_config *cfg = p->pdev->dev.platform_data;
|
|
|
|
if (p->pin_state == new_state) {
|
|
if (p->pin_state == R_TPU_PIN_GPIO)
|
|
gpio_set_value(cfg->pin_gpio, brightness);
|
|
return;
|
|
}
|
|
|
|
if (p->pin_state == R_TPU_PIN_GPIO)
|
|
gpio_free(cfg->pin_gpio);
|
|
|
|
if (p->pin_state == R_TPU_PIN_GPIO_FN)
|
|
gpio_free(cfg->pin_gpio_fn);
|
|
|
|
if (new_state == R_TPU_PIN_GPIO)
|
|
gpio_request_one(cfg->pin_gpio, !!brightness ?
|
|
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
|
|
cfg->name);
|
|
|
|
if (new_state == R_TPU_PIN_GPIO_FN)
|
|
gpio_request(cfg->pin_gpio_fn, cfg->name);
|
|
|
|
p->pin_state = new_state;
|
|
}
|
|
|
|
static void r_tpu_work(struct work_struct *work)
|
|
{
|
|
struct r_tpu_priv *p = container_of(work, struct r_tpu_priv, work);
|
|
enum led_brightness brightness = p->new_brightness;
|
|
|
|
r_tpu_disable(p);
|
|
|
|
/* off and maximum are handled as GPIO pins, in between PWM */
|
|
if ((brightness == 0) || (brightness == p->ldev.max_brightness))
|
|
r_tpu_set_pin(p, R_TPU_PIN_GPIO, brightness);
|
|
else {
|
|
r_tpu_set_pin(p, R_TPU_PIN_GPIO_FN, 0);
|
|
r_tpu_enable(p, brightness);
|
|
}
|
|
}
|
|
|
|
static void r_tpu_set_brightness(struct led_classdev *ldev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct r_tpu_priv *p = container_of(ldev, struct r_tpu_priv, ldev);
|
|
p->new_brightness = brightness;
|
|
schedule_work(&p->work);
|
|
}
|
|
|
|
static int r_tpu_probe(struct platform_device *pdev)
|
|
{
|
|
struct led_renesas_tpu_config *cfg = pdev->dev.platform_data;
|
|
struct r_tpu_priv *p;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
if (!cfg) {
|
|
dev_err(&pdev->dev, "missing platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
|
|
if (p == NULL) {
|
|
dev_err(&pdev->dev, "failed to allocate driver data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "failed to get I/O memory\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* map memory, let mapbase point to our channel */
|
|
p->mapbase = devm_ioremap_nocache(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (p->mapbase == NULL) {
|
|
dev_err(&pdev->dev, "failed to remap I/O memory\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* get hold of clock */
|
|
p->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(p->clk)) {
|
|
dev_err(&pdev->dev, "cannot get clock\n");
|
|
return PTR_ERR(p->clk);
|
|
}
|
|
|
|
p->pdev = pdev;
|
|
p->pin_state = R_TPU_PIN_UNUSED;
|
|
p->timer_state = R_TPU_TIMER_UNUSED;
|
|
p->refresh_rate = cfg->refresh_rate ? cfg->refresh_rate : 100;
|
|
r_tpu_set_pin(p, R_TPU_PIN_GPIO, LED_OFF);
|
|
platform_set_drvdata(pdev, p);
|
|
|
|
INIT_WORK(&p->work, r_tpu_work);
|
|
|
|
p->ldev.name = cfg->name;
|
|
p->ldev.brightness = LED_OFF;
|
|
p->ldev.max_brightness = cfg->max_brightness;
|
|
p->ldev.brightness_set = r_tpu_set_brightness;
|
|
p->ldev.flags |= LED_CORE_SUSPENDRESUME;
|
|
ret = led_classdev_register(&pdev->dev, &p->ldev);
|
|
if (ret < 0)
|
|
goto err0;
|
|
|
|
/* max_brightness may be updated by the LED core code */
|
|
p->min_rate = p->ldev.max_brightness * p->refresh_rate;
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
return 0;
|
|
|
|
err0:
|
|
r_tpu_set_pin(p, R_TPU_PIN_UNUSED, LED_OFF);
|
|
return ret;
|
|
}
|
|
|
|
static int r_tpu_remove(struct platform_device *pdev)
|
|
{
|
|
struct r_tpu_priv *p = platform_get_drvdata(pdev);
|
|
|
|
r_tpu_set_brightness(&p->ldev, LED_OFF);
|
|
led_classdev_unregister(&p->ldev);
|
|
cancel_work_sync(&p->work);
|
|
r_tpu_disable(p);
|
|
r_tpu_set_pin(p, R_TPU_PIN_UNUSED, LED_OFF);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver r_tpu_device_driver = {
|
|
.probe = r_tpu_probe,
|
|
.remove = r_tpu_remove,
|
|
.driver = {
|
|
.name = "leds-renesas-tpu",
|
|
}
|
|
};
|
|
|
|
module_platform_driver(r_tpu_device_driver);
|
|
|
|
MODULE_AUTHOR("Magnus Damm");
|
|
MODULE_DESCRIPTION("Renesas TPU LED Driver");
|
|
MODULE_LICENSE("GPL v2");
|