forked from Minki/linux
2bfcc0611d
Get rid of warning about unused variable Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
757 lines
18 KiB
C
757 lines
18 KiB
C
/*
|
|
DVB device driver for cx231xx
|
|
|
|
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
|
|
Based on em28xx driver
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include "cx231xx.h"
|
|
#include <media/v4l2-common.h>
|
|
#include <media/videobuf-vmalloc.h>
|
|
|
|
#include "xc5000.h"
|
|
#include "dvb_dummy_fe.h"
|
|
#include "s5h1432.h"
|
|
#include "tda18271.h"
|
|
#include "s5h1411.h"
|
|
#include "lgdt3305.h"
|
|
|
|
MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
|
|
MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static unsigned int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
#define dprintk(level, fmt, arg...) do { \
|
|
if (debug >= level) \
|
|
printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \
|
|
} while (0)
|
|
|
|
#define CX231XX_DVB_NUM_BUFS 5
|
|
#define CX231XX_DVB_MAX_PACKETSIZE 564
|
|
#define CX231XX_DVB_MAX_PACKETS 64
|
|
|
|
struct cx231xx_dvb {
|
|
struct dvb_frontend *frontend;
|
|
|
|
/* feed count management */
|
|
struct mutex lock;
|
|
int nfeeds;
|
|
|
|
/* general boilerplate stuff */
|
|
struct dvb_adapter adapter;
|
|
struct dvb_demux demux;
|
|
struct dmxdev dmxdev;
|
|
struct dmx_frontend fe_hw;
|
|
struct dmx_frontend fe_mem;
|
|
struct dvb_net net;
|
|
};
|
|
|
|
static struct s5h1432_config dvico_s5h1432_config = {
|
|
.output_mode = S5H1432_SERIAL_OUTPUT,
|
|
.gpio = S5H1432_GPIO_ON,
|
|
.qam_if = S5H1432_IF_4000,
|
|
.vsb_if = S5H1432_IF_4000,
|
|
.inversion = S5H1432_INVERSION_OFF,
|
|
.status_mode = S5H1432_DEMODLOCKING,
|
|
.mpeg_timing = S5H1432_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct tda18271_std_map cnxt_rde253s_tda18271_std_map = {
|
|
.dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
|
|
.if_lvl = 1, .rfagc_top = 0x37, },
|
|
.dvbt_7 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
|
|
.if_lvl = 1, .rfagc_top = 0x37, },
|
|
.dvbt_8 = { .if_freq = 4000, .agc_mode = 3, .std = 6,
|
|
.if_lvl = 1, .rfagc_top = 0x37, },
|
|
};
|
|
|
|
static struct tda18271_config cnxt_rde253s_tunerconfig = {
|
|
.std_map = &cnxt_rde253s_tda18271_std_map,
|
|
.gate = TDA18271_GATE_ANALOG,
|
|
};
|
|
|
|
static struct s5h1411_config tda18271_s5h1411_config = {
|
|
.output_mode = S5H1411_SERIAL_OUTPUT,
|
|
.gpio = S5H1411_GPIO_OFF,
|
|
.vsb_if = S5H1411_IF_3250,
|
|
.qam_if = S5H1411_IF_4000,
|
|
.inversion = S5H1411_INVERSION_ON,
|
|
.status_mode = S5H1411_DEMODLOCKING,
|
|
.mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
static struct s5h1411_config xc5000_s5h1411_config = {
|
|
.output_mode = S5H1411_SERIAL_OUTPUT,
|
|
.gpio = S5H1411_GPIO_OFF,
|
|
.vsb_if = S5H1411_IF_3250,
|
|
.qam_if = S5H1411_IF_3250,
|
|
.inversion = S5H1411_INVERSION_OFF,
|
|
.status_mode = S5H1411_DEMODLOCKING,
|
|
.mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
|
|
};
|
|
|
|
static struct lgdt3305_config hcw_lgdt3305_config = {
|
|
.i2c_addr = 0x0e,
|
|
.mpeg_mode = LGDT3305_MPEG_SERIAL,
|
|
.tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
|
|
.tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
|
|
.deny_i2c_rptr = 1,
|
|
.spectral_inversion = 1,
|
|
.qam_if_khz = 4000,
|
|
.vsb_if_khz = 3250,
|
|
};
|
|
|
|
static struct tda18271_std_map hauppauge_tda18271_std_map = {
|
|
.atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
|
|
.if_lvl = 1, .rfagc_top = 0x58, },
|
|
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
|
|
.if_lvl = 1, .rfagc_top = 0x58, },
|
|
};
|
|
|
|
static struct tda18271_config hcw_tda18271_config = {
|
|
.std_map = &hauppauge_tda18271_std_map,
|
|
.gate = TDA18271_GATE_DIGITAL,
|
|
};
|
|
|
|
static inline void print_err_status(struct cx231xx *dev, int packet, int status)
|
|
{
|
|
char *errmsg = "Unknown";
|
|
|
|
switch (status) {
|
|
case -ENOENT:
|
|
errmsg = "unlinked synchronuously";
|
|
break;
|
|
case -ECONNRESET:
|
|
errmsg = "unlinked asynchronuously";
|
|
break;
|
|
case -ENOSR:
|
|
errmsg = "Buffer error (overrun)";
|
|
break;
|
|
case -EPIPE:
|
|
errmsg = "Stalled (device not responding)";
|
|
break;
|
|
case -EOVERFLOW:
|
|
errmsg = "Babble (bad cable?)";
|
|
break;
|
|
case -EPROTO:
|
|
errmsg = "Bit-stuff error (bad cable?)";
|
|
break;
|
|
case -EILSEQ:
|
|
errmsg = "CRC/Timeout (could be anything)";
|
|
break;
|
|
case -ETIME:
|
|
errmsg = "Device does not respond";
|
|
break;
|
|
}
|
|
if (packet < 0) {
|
|
dprintk(1, "URB status %d [%s].\n", status, errmsg);
|
|
} else {
|
|
dprintk(1, "URB packet %d, status %d [%s].\n",
|
|
packet, status, errmsg);
|
|
}
|
|
}
|
|
|
|
static inline int dvb_isoc_copy(struct cx231xx *dev, struct urb *urb)
|
|
{
|
|
int i;
|
|
|
|
if (!dev)
|
|
return 0;
|
|
|
|
if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED))
|
|
return 0;
|
|
|
|
if (urb->status < 0) {
|
|
print_err_status(dev, -1, urb->status);
|
|
if (urb->status == -ENOENT)
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < urb->number_of_packets; i++) {
|
|
int status = urb->iso_frame_desc[i].status;
|
|
|
|
if (status < 0) {
|
|
print_err_status(dev, i, status);
|
|
if (urb->iso_frame_desc[i].status != -EPROTO)
|
|
continue;
|
|
}
|
|
|
|
dvb_dmx_swfilter(&dev->dvb->demux,
|
|
urb->transfer_buffer +
|
|
urb->iso_frame_desc[i].offset,
|
|
urb->iso_frame_desc[i].actual_length);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int dvb_bulk_copy(struct cx231xx *dev, struct urb *urb)
|
|
{
|
|
if (!dev)
|
|
return 0;
|
|
|
|
if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED))
|
|
return 0;
|
|
|
|
if (urb->status < 0) {
|
|
print_err_status(dev, -1, urb->status);
|
|
if (urb->status == -ENOENT)
|
|
return 0;
|
|
}
|
|
|
|
/* Feed the transport payload into the kernel demux */
|
|
dvb_dmx_swfilter(&dev->dvb->demux,
|
|
urb->transfer_buffer, urb->actual_length);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int start_streaming(struct cx231xx_dvb *dvb)
|
|
{
|
|
int rc;
|
|
struct cx231xx *dev = dvb->adapter.priv;
|
|
|
|
if (dev->USE_ISO) {
|
|
cx231xx_info("DVB transfer mode is ISO.\n");
|
|
mutex_lock(&dev->i2c_lock);
|
|
cx231xx_enable_i2c_for_tuner(dev, I2C_1);
|
|
cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
|
|
cx231xx_enable_i2c_for_tuner(dev, I2C_3);
|
|
mutex_unlock(&dev->i2c_lock);
|
|
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
|
|
if (rc < 0)
|
|
return rc;
|
|
dev->mode_tv = 1;
|
|
return cx231xx_init_isoc(dev, CX231XX_DVB_MAX_PACKETS,
|
|
CX231XX_DVB_NUM_BUFS,
|
|
dev->ts1_mode.max_pkt_size,
|
|
dvb_isoc_copy);
|
|
} else {
|
|
cx231xx_info("DVB transfer mode is BULK.\n");
|
|
cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
|
|
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
|
|
if (rc < 0)
|
|
return rc;
|
|
dev->mode_tv = 1;
|
|
return cx231xx_init_bulk(dev, CX231XX_DVB_MAX_PACKETS,
|
|
CX231XX_DVB_NUM_BUFS,
|
|
dev->ts1_mode.max_pkt_size,
|
|
dvb_bulk_copy);
|
|
}
|
|
|
|
}
|
|
|
|
static int stop_streaming(struct cx231xx_dvb *dvb)
|
|
{
|
|
struct cx231xx *dev = dvb->adapter.priv;
|
|
|
|
if (dev->USE_ISO)
|
|
cx231xx_uninit_isoc(dev);
|
|
else
|
|
cx231xx_uninit_bulk(dev);
|
|
|
|
cx231xx_set_mode(dev, CX231XX_SUSPEND);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int start_feed(struct dvb_demux_feed *feed)
|
|
{
|
|
struct dvb_demux *demux = feed->demux;
|
|
struct cx231xx_dvb *dvb = demux->priv;
|
|
int rc, ret;
|
|
|
|
if (!demux->dmx.frontend)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&dvb->lock);
|
|
dvb->nfeeds++;
|
|
rc = dvb->nfeeds;
|
|
|
|
if (dvb->nfeeds == 1) {
|
|
ret = start_streaming(dvb);
|
|
if (ret < 0)
|
|
rc = ret;
|
|
}
|
|
|
|
mutex_unlock(&dvb->lock);
|
|
return rc;
|
|
}
|
|
|
|
static int stop_feed(struct dvb_demux_feed *feed)
|
|
{
|
|
struct dvb_demux *demux = feed->demux;
|
|
struct cx231xx_dvb *dvb = demux->priv;
|
|
int err = 0;
|
|
|
|
mutex_lock(&dvb->lock);
|
|
dvb->nfeeds--;
|
|
|
|
if (0 == dvb->nfeeds)
|
|
err = stop_streaming(dvb);
|
|
|
|
mutex_unlock(&dvb->lock);
|
|
return err;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
static int cx231xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
|
|
{
|
|
struct cx231xx *dev = fe->dvb->priv;
|
|
|
|
if (acquire)
|
|
return cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
|
|
else
|
|
return cx231xx_set_mode(dev, CX231XX_SUSPEND);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static struct xc5000_config cnxt_rde250_tunerconfig = {
|
|
.i2c_address = 0x61,
|
|
.if_khz = 4000,
|
|
};
|
|
static struct xc5000_config cnxt_rdu250_tunerconfig = {
|
|
.i2c_address = 0x61,
|
|
.if_khz = 3250,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
#if 0
|
|
static int attach_xc5000(u8 addr, struct cx231xx *dev)
|
|
{
|
|
|
|
struct dvb_frontend *fe;
|
|
struct xc5000_config cfg;
|
|
|
|
memset(&cfg, 0, sizeof(cfg));
|
|
cfg.i2c_adap = &dev->i2c_bus[1].i2c_adap;
|
|
cfg.i2c_addr = addr;
|
|
|
|
if (!dev->dvb->frontend) {
|
|
printk(KERN_ERR "%s/2: dvb frontend not attached. "
|
|
"Can't attach xc5000\n", dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
fe = dvb_attach(xc5000_attach, dev->dvb->frontend, &cfg);
|
|
if (!fe) {
|
|
printk(KERN_ERR "%s/2: xc5000 attach failed\n", dev->name);
|
|
dvb_frontend_detach(dev->dvb->frontend);
|
|
dev->dvb->frontend = NULL;
|
|
return -EINVAL;
|
|
}
|
|
|
|
printk(KERN_INFO "%s/2: xc5000 attached\n", dev->name);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int cx231xx_set_analog_freq(struct cx231xx *dev, u32 freq)
|
|
{
|
|
int status = 0;
|
|
|
|
if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
|
|
|
|
struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
|
|
|
|
if (dops->set_analog_params != NULL) {
|
|
struct analog_parameters params;
|
|
|
|
params.frequency = freq;
|
|
params.std = dev->norm;
|
|
params.mode = 0; /* 0- Air; 1 - cable */
|
|
/*params.audmode = ; */
|
|
|
|
/* Set the analog parameters to set the frequency */
|
|
dops->set_analog_params(dev->dvb->frontend, ¶ms);
|
|
}
|
|
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
int cx231xx_reset_analog_tuner(struct cx231xx *dev)
|
|
{
|
|
int status = 0;
|
|
|
|
if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
|
|
|
|
struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
|
|
|
|
if (dops->init != NULL && !dev->xc_fw_load_done) {
|
|
|
|
cx231xx_info("Reloading firmware for XC5000\n");
|
|
status = dops->init(dev->dvb->frontend);
|
|
if (status == 0) {
|
|
dev->xc_fw_load_done = 1;
|
|
cx231xx_info
|
|
("XC5000 firmware download completed\n");
|
|
} else {
|
|
dev->xc_fw_load_done = 0;
|
|
cx231xx_info
|
|
("XC5000 firmware download failed !!!\n");
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int register_dvb(struct cx231xx_dvb *dvb,
|
|
struct module *module,
|
|
struct cx231xx *dev, struct device *device)
|
|
{
|
|
int result;
|
|
|
|
mutex_init(&dvb->lock);
|
|
|
|
/* register adapter */
|
|
result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
|
|
adapter_nr);
|
|
if (result < 0) {
|
|
printk(KERN_WARNING
|
|
"%s: dvb_register_adapter failed (errno = %d)\n",
|
|
dev->name, result);
|
|
goto fail_adapter;
|
|
}
|
|
|
|
/* Ensure all frontends negotiate bus access */
|
|
dvb->frontend->ops.ts_bus_ctrl = cx231xx_dvb_bus_ctrl;
|
|
|
|
dvb->adapter.priv = dev;
|
|
|
|
/* register frontend */
|
|
result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
|
|
if (result < 0) {
|
|
printk(KERN_WARNING
|
|
"%s: dvb_register_frontend failed (errno = %d)\n",
|
|
dev->name, result);
|
|
goto fail_frontend;
|
|
}
|
|
|
|
/* register demux stuff */
|
|
dvb->demux.dmx.capabilities =
|
|
DMX_TS_FILTERING | DMX_SECTION_FILTERING |
|
|
DMX_MEMORY_BASED_FILTERING;
|
|
dvb->demux.priv = dvb;
|
|
dvb->demux.filternum = 256;
|
|
dvb->demux.feednum = 256;
|
|
dvb->demux.start_feed = start_feed;
|
|
dvb->demux.stop_feed = stop_feed;
|
|
|
|
result = dvb_dmx_init(&dvb->demux);
|
|
if (result < 0) {
|
|
printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n",
|
|
dev->name, result);
|
|
goto fail_dmx;
|
|
}
|
|
|
|
dvb->dmxdev.filternum = 256;
|
|
dvb->dmxdev.demux = &dvb->demux.dmx;
|
|
dvb->dmxdev.capabilities = 0;
|
|
result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
|
|
if (result < 0) {
|
|
printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
|
|
dev->name, result);
|
|
goto fail_dmxdev;
|
|
}
|
|
|
|
dvb->fe_hw.source = DMX_FRONTEND_0;
|
|
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
|
|
if (result < 0) {
|
|
printk(KERN_WARNING
|
|
"%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
|
|
dev->name, result);
|
|
goto fail_fe_hw;
|
|
}
|
|
|
|
dvb->fe_mem.source = DMX_MEMORY_FE;
|
|
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
|
|
if (result < 0) {
|
|
printk(KERN_WARNING
|
|
"%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
|
|
dev->name, result);
|
|
goto fail_fe_mem;
|
|
}
|
|
|
|
result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
|
|
if (result < 0) {
|
|
printk(KERN_WARNING
|
|
"%s: connect_frontend failed (errno = %d)\n", dev->name,
|
|
result);
|
|
goto fail_fe_conn;
|
|
}
|
|
|
|
/* register network adapter */
|
|
dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
|
|
return 0;
|
|
|
|
fail_fe_conn:
|
|
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
|
|
fail_fe_mem:
|
|
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
|
|
fail_fe_hw:
|
|
dvb_dmxdev_release(&dvb->dmxdev);
|
|
fail_dmxdev:
|
|
dvb_dmx_release(&dvb->demux);
|
|
fail_dmx:
|
|
dvb_unregister_frontend(dvb->frontend);
|
|
fail_frontend:
|
|
dvb_frontend_detach(dvb->frontend);
|
|
dvb_unregister_adapter(&dvb->adapter);
|
|
fail_adapter:
|
|
return result;
|
|
}
|
|
|
|
static void unregister_dvb(struct cx231xx_dvb *dvb)
|
|
{
|
|
dvb_net_release(&dvb->net);
|
|
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
|
|
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
|
|
dvb_dmxdev_release(&dvb->dmxdev);
|
|
dvb_dmx_release(&dvb->demux);
|
|
dvb_unregister_frontend(dvb->frontend);
|
|
dvb_frontend_detach(dvb->frontend);
|
|
dvb_unregister_adapter(&dvb->adapter);
|
|
}
|
|
|
|
static int dvb_init(struct cx231xx *dev)
|
|
{
|
|
int result = 0;
|
|
struct cx231xx_dvb *dvb;
|
|
|
|
if (!dev->board.has_dvb) {
|
|
/* This device does not support the extension */
|
|
return 0;
|
|
}
|
|
|
|
dvb = kzalloc(sizeof(struct cx231xx_dvb), GFP_KERNEL);
|
|
|
|
if (dvb == NULL) {
|
|
printk(KERN_INFO "cx231xx_dvb: memory allocation failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
dev->dvb = dvb;
|
|
dev->cx231xx_set_analog_freq = cx231xx_set_analog_freq;
|
|
dev->cx231xx_reset_analog_tuner = cx231xx_reset_analog_tuner;
|
|
|
|
mutex_lock(&dev->lock);
|
|
cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
|
|
cx231xx_demod_reset(dev);
|
|
/* init frontend */
|
|
switch (dev->model) {
|
|
case CX231XX_BOARD_CNXT_CARRAERA:
|
|
case CX231XX_BOARD_CNXT_RDE_250:
|
|
|
|
dev->dvb->frontend = dvb_attach(s5h1432_attach,
|
|
&dvico_s5h1432_config,
|
|
&dev->i2c_bus[2].i2c_adap);
|
|
|
|
if (dev->dvb->frontend == NULL) {
|
|
printk(DRIVER_NAME
|
|
": Failed to attach s5h1432 front end\n");
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
/* define general-purpose callback pointer */
|
|
dvb->frontend->callback = cx231xx_tuner_callback;
|
|
|
|
if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
|
|
&dev->i2c_bus[1].i2c_adap,
|
|
&cnxt_rde250_tunerconfig)) {
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
break;
|
|
case CX231XX_BOARD_CNXT_SHELBY:
|
|
case CX231XX_BOARD_CNXT_RDU_250:
|
|
|
|
dev->dvb->frontend = dvb_attach(s5h1411_attach,
|
|
&xc5000_s5h1411_config,
|
|
&dev->i2c_bus[2].i2c_adap);
|
|
|
|
if (dev->dvb->frontend == NULL) {
|
|
printk(DRIVER_NAME
|
|
": Failed to attach dummy front end\n");
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
/* define general-purpose callback pointer */
|
|
dvb->frontend->callback = cx231xx_tuner_callback;
|
|
|
|
if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
|
|
&dev->i2c_bus[1].i2c_adap,
|
|
&cnxt_rdu250_tunerconfig)) {
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
break;
|
|
case CX231XX_BOARD_CNXT_RDE_253S:
|
|
|
|
dev->dvb->frontend = dvb_attach(s5h1432_attach,
|
|
&dvico_s5h1432_config,
|
|
&dev->i2c_bus[2].i2c_adap);
|
|
|
|
if (dev->dvb->frontend == NULL) {
|
|
printk(DRIVER_NAME
|
|
": Failed to attach s5h1432 front end\n");
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
/* define general-purpose callback pointer */
|
|
dvb->frontend->callback = cx231xx_tuner_callback;
|
|
|
|
if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&cnxt_rde253s_tunerconfig)) {
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
break;
|
|
case CX231XX_BOARD_CNXT_RDU_253S:
|
|
|
|
dev->dvb->frontend = dvb_attach(s5h1411_attach,
|
|
&tda18271_s5h1411_config,
|
|
&dev->i2c_bus[2].i2c_adap);
|
|
|
|
if (dev->dvb->frontend == NULL) {
|
|
printk(DRIVER_NAME
|
|
": Failed to attach dummy front end\n");
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
/* define general-purpose callback pointer */
|
|
dvb->frontend->callback = cx231xx_tuner_callback;
|
|
|
|
if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&cnxt_rde253s_tunerconfig)) {
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
break;
|
|
case CX231XX_BOARD_HAUPPAUGE_EXETER:
|
|
|
|
printk(KERN_INFO "%s: looking for tuner / demod on i2c bus: %d\n",
|
|
__func__, i2c_adapter_id(&dev->i2c_bus[1].i2c_adap));
|
|
|
|
dev->dvb->frontend = dvb_attach(lgdt3305_attach,
|
|
&hcw_lgdt3305_config,
|
|
&dev->i2c_bus[1].i2c_adap);
|
|
|
|
if (dev->dvb->frontend == NULL) {
|
|
printk(DRIVER_NAME
|
|
": Failed to attach LG3305 front end\n");
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
/* define general-purpose callback pointer */
|
|
dvb->frontend->callback = cx231xx_tuner_callback;
|
|
|
|
dvb_attach(tda18271_attach, dev->dvb->frontend,
|
|
0x60, &dev->i2c_bus[1].i2c_adap,
|
|
&hcw_tda18271_config);
|
|
break;
|
|
|
|
|
|
default:
|
|
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
|
|
" isn't supported yet\n", dev->name);
|
|
break;
|
|
}
|
|
if (NULL == dvb->frontend) {
|
|
printk(KERN_ERR
|
|
"%s/2: frontend initialization failed\n", dev->name);
|
|
result = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
/* register everything */
|
|
result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);
|
|
|
|
if (result < 0)
|
|
goto out_free;
|
|
|
|
|
|
printk(KERN_INFO "Successfully loaded cx231xx-dvb\n");
|
|
|
|
ret:
|
|
cx231xx_set_mode(dev, CX231XX_SUSPEND);
|
|
mutex_unlock(&dev->lock);
|
|
return result;
|
|
|
|
out_free:
|
|
kfree(dvb);
|
|
dev->dvb = NULL;
|
|
goto ret;
|
|
}
|
|
|
|
static int dvb_fini(struct cx231xx *dev)
|
|
{
|
|
if (!dev->board.has_dvb) {
|
|
/* This device does not support the extension */
|
|
return 0;
|
|
}
|
|
|
|
if (dev->dvb) {
|
|
unregister_dvb(dev->dvb);
|
|
dev->dvb = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct cx231xx_ops dvb_ops = {
|
|
.id = CX231XX_DVB,
|
|
.name = "Cx231xx dvb Extension",
|
|
.init = dvb_init,
|
|
.fini = dvb_fini,
|
|
};
|
|
|
|
static int __init cx231xx_dvb_register(void)
|
|
{
|
|
return cx231xx_register_extension(&dvb_ops);
|
|
}
|
|
|
|
static void __exit cx231xx_dvb_unregister(void)
|
|
{
|
|
cx231xx_unregister_extension(&dvb_ops);
|
|
}
|
|
|
|
module_init(cx231xx_dvb_register);
|
|
module_exit(cx231xx_dvb_unregister);
|