forked from Minki/linux
685e2d08c5
Change interrupt numbering for sparse IRQ. We do this using a fixed offset until we can drop irqs.h once all it's users have been updated. Note that this depends on the GPIO fix for the MPUIO IRQs "gpio: omap: Fix regression for MPUIO interrupts". Also note that this patch adds some extra irq alloc warnings that will go away when we stop calling irq_alloc_descs in gpio-omap.c with a follow-up patch. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
281 lines
8.8 KiB
ArmAsm
281 lines
8.8 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S
|
|
*
|
|
* Based on linux/arch/arm/lib/floppydma.S
|
|
* Renamed and modified to work with 2.6 kernel by Matt Callow
|
|
* Copyright (C) 1995, 1996 Russell King
|
|
* Copyright (C) 2004 Pete Trapps
|
|
* Copyright (C) 2006 Matt Callow
|
|
* Copyright (C) 2010 Janusz Krzysztofik
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2
|
|
* as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
|
|
#include <mach/board-ams-delta.h>
|
|
#include <mach/ams-delta-fiq.h>
|
|
|
|
#include "iomap.h"
|
|
#include "soc.h"
|
|
|
|
/*
|
|
* GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
|
|
* Unfortunately, those were not placed in a separate header file.
|
|
*/
|
|
#define OMAP1510_GPIO_BASE 0xFFFCE000
|
|
#define OMAP1510_GPIO_DATA_INPUT 0x00
|
|
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
|
|
#define OMAP1510_GPIO_DIR_CONTROL 0x08
|
|
#define OMAP1510_GPIO_INT_CONTROL 0x0c
|
|
#define OMAP1510_GPIO_INT_MASK 0x10
|
|
#define OMAP1510_GPIO_INT_STATUS 0x14
|
|
#define OMAP1510_GPIO_PIN_CONTROL 0x18
|
|
|
|
/* GPIO register bitmasks */
|
|
#define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
|
|
#define KEYBRD_CLK_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK)
|
|
#define MODEM_IRQ_MASK (0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ)
|
|
#define HOOK_SWITCH_MASK (0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH)
|
|
#define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
|
|
|
|
/* IRQ handler register bitmasks */
|
|
#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
|
|
#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1)
|
|
|
|
/* Driver buffer byte offsets */
|
|
#define BUF_MASK (FIQ_MASK * 4)
|
|
#define BUF_STATE (FIQ_STATE * 4)
|
|
#define BUF_KEYS_CNT (FIQ_KEYS_CNT * 4)
|
|
#define BUF_TAIL_OFFSET (FIQ_TAIL_OFFSET * 4)
|
|
#define BUF_HEAD_OFFSET (FIQ_HEAD_OFFSET * 4)
|
|
#define BUF_BUF_LEN (FIQ_BUF_LEN * 4)
|
|
#define BUF_KEY (FIQ_KEY * 4)
|
|
#define BUF_MISSED_KEYS (FIQ_MISSED_KEYS * 4)
|
|
#define BUF_BUFFER_START (FIQ_BUFFER_START * 4)
|
|
#define BUF_GPIO_INT_MASK (FIQ_GPIO_INT_MASK * 4)
|
|
#define BUF_KEYS_HICNT (FIQ_KEYS_HICNT * 4)
|
|
#define BUF_IRQ_PEND (FIQ_IRQ_PEND * 4)
|
|
#define BUF_SIR_CODE_L1 (FIQ_SIR_CODE_L1 * 4)
|
|
#define BUF_SIR_CODE_L2 (IRQ_SIR_CODE_L2 * 4)
|
|
#define BUF_CNT_INT_00 (FIQ_CNT_INT_00 * 4)
|
|
#define BUF_CNT_INT_KEY (FIQ_CNT_INT_KEY * 4)
|
|
#define BUF_CNT_INT_MDM (FIQ_CNT_INT_MDM * 4)
|
|
#define BUF_CNT_INT_03 (FIQ_CNT_INT_03 * 4)
|
|
#define BUF_CNT_INT_HSW (FIQ_CNT_INT_HSW * 4)
|
|
#define BUF_CNT_INT_05 (FIQ_CNT_INT_05 * 4)
|
|
#define BUF_CNT_INT_06 (FIQ_CNT_INT_06 * 4)
|
|
#define BUF_CNT_INT_07 (FIQ_CNT_INT_07 * 4)
|
|
#define BUF_CNT_INT_08 (FIQ_CNT_INT_08 * 4)
|
|
#define BUF_CNT_INT_09 (FIQ_CNT_INT_09 * 4)
|
|
#define BUF_CNT_INT_10 (FIQ_CNT_INT_10 * 4)
|
|
#define BUF_CNT_INT_11 (FIQ_CNT_INT_11 * 4)
|
|
#define BUF_CNT_INT_12 (FIQ_CNT_INT_12 * 4)
|
|
#define BUF_CNT_INT_13 (FIQ_CNT_INT_13 * 4)
|
|
#define BUF_CNT_INT_14 (FIQ_CNT_INT_14 * 4)
|
|
#define BUF_CNT_INT_15 (FIQ_CNT_INT_15 * 4)
|
|
#define BUF_CIRC_BUFF (FIQ_CIRC_BUFF * 4)
|
|
|
|
|
|
/*
|
|
* Register usage
|
|
* r8 - temporary
|
|
* r9 - the driver buffer
|
|
* r10 - temporary
|
|
* r11 - interrupts mask
|
|
* r12 - base pointers
|
|
* r13 - interrupts status
|
|
*/
|
|
|
|
.text
|
|
|
|
.global qwerty_fiqin_end
|
|
|
|
ENTRY(qwerty_fiqin_start)
|
|
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
|
|
@ FIQ intrrupt handler
|
|
ldr r12, omap_ih1_base @ set pointer to level1 handler
|
|
|
|
ldr r11, [r12, #IRQ_MIR_REG_OFFSET] @ fetch interrupts mask
|
|
|
|
ldr r13, [r12, #IRQ_ITR_REG_OFFSET] @ fetch interrupts status
|
|
bics r13, r13, r11 @ clear masked - any left?
|
|
beq exit @ none - spurious FIQ? exit
|
|
|
|
ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET] @ get requested interrupt number
|
|
|
|
mov r8, #2 @ reset FIQ agreement
|
|
str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
|
|
|
|
cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt?
|
|
beq gpio @ yes - process it
|
|
|
|
mov r8, #1
|
|
orr r8, r11, r8, lsl r10 @ mask spurious interrupt
|
|
str r8, [r12, #IRQ_MIR_REG_OFFSET]
|
|
exit:
|
|
subs pc, lr, #4 @ return from FIQ
|
|
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
|
|
|
|
|
|
@@@@@@@@@@@@@@@@@@@@@@@@@@@
|
|
gpio: @ GPIO bank interrupt handler
|
|
ldr r12, omap1510_gpio_base @ set base pointer to GPIO bank
|
|
|
|
ldr r11, [r12, #OMAP1510_GPIO_INT_MASK] @ fetch GPIO interrupts mask
|
|
restart:
|
|
ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ fetch status bits
|
|
bics r13, r13, r11 @ clear masked - any left?
|
|
beq exit @ no - spurious interrupt? exit
|
|
|
|
orr r11, r11, r13 @ mask all requested interrupts
|
|
str r11, [r12, #OMAP1510_GPIO_INT_MASK]
|
|
|
|
ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set?
|
|
beq hksw @ no - try next source
|
|
|
|
|
|
@@@@@@@@@@@@@@@@@@@@@@
|
|
@ Keyboard clock FIQ mode interrupt handler
|
|
@ r10 now contains KEYBRD_CLK_MASK, use it
|
|
str r10, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack the interrupt
|
|
bic r11, r11, r10 @ unmask it
|
|
str r11, [r12, #OMAP1510_GPIO_INT_MASK]
|
|
|
|
@ Process keyboard data
|
|
ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT] @ fetch GPIO input
|
|
|
|
ldr r10, [r9, #BUF_STATE] @ fetch kbd interface state
|
|
cmp r10, #0 @ are we expecting start bit?
|
|
bne data @ no - go to data processing
|
|
|
|
ands r8, r8, #KEYBRD_DATA_MASK @ check start bit - detected?
|
|
beq hksw @ no - try next source
|
|
|
|
@ r8 contains KEYBRD_DATA_MASK, use it
|
|
str r8, [r9, #BUF_STATE] @ enter data processing state
|
|
@ r10 already contains 0, reuse it
|
|
str r10, [r9, #BUF_KEY] @ clear keycode
|
|
mov r10, #2 @ reset input bit mask
|
|
str r10, [r9, #BUF_MASK]
|
|
|
|
@ Mask other GPIO line interrupts till key done
|
|
str r11, [r9, #BUF_GPIO_INT_MASK] @ save mask for later restore
|
|
mvn r11, #KEYBRD_CLK_MASK @ prepare all except kbd mask
|
|
str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ store into the mask register
|
|
|
|
b restart @ restart
|
|
|
|
data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask
|
|
|
|
@ r8 still contains GPIO input bits
|
|
ands r8, r8, #KEYBRD_DATA_MASK @ is keyboard data line low?
|
|
ldreq r8, [r9, #BUF_KEY] @ yes - fetch collected so far,
|
|
orreq r8, r8, r10 @ set 1 at current mask position
|
|
streq r8, [r9, #BUF_KEY] @ and save back
|
|
|
|
mov r10, r10, lsl #1 @ shift mask left
|
|
bics r10, r10, #0x800 @ have we got all the bits?
|
|
strne r10, [r9, #BUF_MASK] @ not yet - store the mask
|
|
bne restart @ and restart
|
|
|
|
@ r10 already contains 0, reuse it
|
|
str r10, [r9, #BUF_STATE] @ reset state to start
|
|
|
|
@ Key done - restore interrupt mask
|
|
ldr r10, [r9, #BUF_GPIO_INT_MASK] @ fetch saved mask
|
|
and r11, r11, r10 @ unmask all saved as unmasked
|
|
str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ restore into the mask register
|
|
|
|
@ Try appending the keycode to the circular buffer
|
|
ldr r10, [r9, #BUF_KEYS_CNT] @ get saved keystrokes count
|
|
ldr r8, [r9, #BUF_BUF_LEN] @ get buffer size
|
|
cmp r10, r8 @ is buffer full?
|
|
beq hksw @ yes - key lost, next source
|
|
|
|
add r10, r10, #1 @ incremet keystrokes counter
|
|
str r10, [r9, #BUF_KEYS_CNT]
|
|
|
|
ldr r10, [r9, #BUF_TAIL_OFFSET] @ get buffer tail offset
|
|
@ r8 already contains buffer size
|
|
cmp r10, r8 @ end of buffer?
|
|
moveq r10, #0 @ yes - rewind to buffer start
|
|
|
|
ldr r12, [r9, #BUF_BUFFER_START] @ get buffer start address
|
|
add r12, r12, r10, LSL #2 @ calculate buffer tail address
|
|
ldr r8, [r9, #BUF_KEY] @ get last keycode
|
|
str r8, [r12] @ append it to the buffer tail
|
|
|
|
add r10, r10, #1 @ increment buffer tail offset
|
|
str r10, [r9, #BUF_TAIL_OFFSET]
|
|
|
|
ldr r10, [r9, #BUF_CNT_INT_KEY] @ increment interrupts counter
|
|
add r10, r10, #1
|
|
str r10, [r9, #BUF_CNT_INT_KEY]
|
|
@@@@@@@@@@@@@@@@@@@@@@@@
|
|
|
|
|
|
hksw: @Is hook switch interrupt requested?
|
|
tst r13, #HOOK_SWITCH_MASK @ is hook switch status bit set?
|
|
beq mdm @ no - try next source
|
|
|
|
|
|
@@@@@@@@@@@@@@@@@@@@@@@@
|
|
@ Hook switch interrupt FIQ mode simple handler
|
|
|
|
@ Don't toggle active edge, the switch always bounces
|
|
|
|
@ Increment hook switch interrupt counter
|
|
ldr r10, [r9, #BUF_CNT_INT_HSW]
|
|
add r10, r10, #1
|
|
str r10, [r9, #BUF_CNT_INT_HSW]
|
|
@@@@@@@@@@@@@@@@@@@@@@@@
|
|
|
|
|
|
mdm: @Is it a modem interrupt?
|
|
tst r13, #MODEM_IRQ_MASK @ is modem status bit set?
|
|
beq irq @ no - check for next interrupt
|
|
|
|
|
|
@@@@@@@@@@@@@@@@@@@@@@@@
|
|
@ Modem FIQ mode interrupt handler stub
|
|
|
|
@ Increment modem interrupt counter
|
|
ldr r10, [r9, #BUF_CNT_INT_MDM]
|
|
add r10, r10, #1
|
|
str r10, [r9, #BUF_CNT_INT_MDM]
|
|
@@@@@@@@@@@@@@@@@@@@@@@@
|
|
|
|
|
|
irq: @ Place deferred_fiq interrupt request
|
|
ldr r12, deferred_fiq_ih_base @ set pointer to IRQ handler
|
|
mov r10, #DEFERRED_FIQ_MASK @ set deferred_fiq bit
|
|
str r10, [r12, #IRQ_ISR_REG_OFFSET] @ place it in the ISR register
|
|
|
|
ldr r12, omap1510_gpio_base @ set pointer back to GPIO bank
|
|
b restart @ check for next GPIO interrupt
|
|
@@@@@@@@@@@@@@@@@@@@@@@@@@@
|
|
|
|
|
|
/*
|
|
* Virtual addresses for IO
|
|
*/
|
|
omap_ih1_base:
|
|
.word OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
|
|
deferred_fiq_ih_base:
|
|
.word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE)
|
|
omap1510_gpio_base:
|
|
.word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE)
|
|
qwerty_fiqin_end:
|
|
|
|
/*
|
|
* Check the size of the FIQ,
|
|
* it cannot go beyond 0xffff0200, and is copied to 0xffff001c
|
|
*/
|
|
.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c)
|
|
.err
|
|
.endif
|