4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
28 lines
767 B
Plaintext
28 lines
767 B
Plaintext
* Clock bindings for Freescale i.MX27
|
|
|
|
Required properties:
|
|
- compatible: Should be "fsl,imx27-ccm"
|
|
- reg: Address and length of the register set
|
|
- interrupts: Should contain CCM interrupt
|
|
- #clock-cells: Should be <1>
|
|
|
|
The clock consumer should specify the desired clock by having the clock
|
|
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
|
|
for the full list of i.MX27 clock IDs.
|
|
|
|
Examples:
|
|
clks: ccm@10027000{
|
|
compatible = "fsl,imx27-ccm";
|
|
reg = <0x10027000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
uart1: serial@1000a000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1000a000 0x1000>;
|
|
interrupts = <20>;
|
|
clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
|
|
<&clks IMX27_CLK_PER1_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|