forked from Minki/linux
01e2ab207c
The I2S DAI driver for blackfin SPORT, but works in TDM mode. I2S is not a special case of TDM with only left and right two slots for SPORT interface. I2S coordinates with TDM in SPORT, but not a part of TDM. TDM require different hardware configuration with I2S, not only different slot number. One is "Stereo Serial Operation" mode of SPORT, the other one is "Multichannel Operation" mode. They are incompatible at the same time. Hardware and DMA description and data transfer flow are much different for I2S and TDM. Merging them as a whole will be very ugly and difficult to maintain. So we don't define a new DAI type, but give two DAI instances for standard I2S and TDM, both in I2S-family DAI type. The TDM instance still uses the I2S-family DAI type. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
344 lines
8.1 KiB
C
344 lines
8.1 KiB
C
/*
|
|
* File: sound/soc/blackfin/bf5xx-tdm.c
|
|
* Author: Barry Song <Barry.Song@analog.com>
|
|
*
|
|
* Created: Thurs June 04 2009
|
|
* Description: Blackfin I2S(TDM) CPU DAI driver
|
|
* Even though TDM mode can be as part of I2S DAI, but there
|
|
* are so much difference in configuration and data flow,
|
|
* it's very ugly to integrate I2S and TDM into a module
|
|
*
|
|
* Modified:
|
|
* Copyright 2009 Analog Devices Inc.
|
|
*
|
|
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see the file COPYING, or write
|
|
* to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/portmux.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include "bf5xx-sport.h"
|
|
#include "bf5xx-tdm.h"
|
|
|
|
struct bf5xx_tdm_port {
|
|
u16 tcr1;
|
|
u16 rcr1;
|
|
u16 tcr2;
|
|
u16 rcr2;
|
|
int configured;
|
|
};
|
|
|
|
static struct bf5xx_tdm_port bf5xx_tdm;
|
|
static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
|
|
|
|
static struct sport_param sport_params[2] = {
|
|
{
|
|
.dma_rx_chan = CH_SPORT0_RX,
|
|
.dma_tx_chan = CH_SPORT0_TX,
|
|
.err_irq = IRQ_SPORT0_ERROR,
|
|
.regs = (struct sport_register *)SPORT0_TCR1,
|
|
},
|
|
{
|
|
.dma_rx_chan = CH_SPORT1_RX,
|
|
.dma_tx_chan = CH_SPORT1_TX,
|
|
.err_irq = IRQ_SPORT1_ERROR,
|
|
.regs = (struct sport_register *)SPORT1_TCR1,
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Setting the TFS pin selector for SPORT 0 based on whether the selected
|
|
* port id F or G. If the port is F then no conflict should exist for the
|
|
* TFS. When Port G is selected and EMAC then there is a conflict between
|
|
* the PHY interrupt line and TFS. Current settings prevent the conflict
|
|
* by ignoring the TFS pin when Port G is selected. This allows both
|
|
* ssm2602 using Port G and EMAC concurrently.
|
|
*/
|
|
#ifdef CONFIG_BF527_SPORT0_PORTF
|
|
#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
|
|
#else
|
|
#define LOCAL_SPORT0_TFS (0)
|
|
#endif
|
|
|
|
static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
|
|
P_SPORT0_DRPRI, P_SPORT0_RSCLK, LOCAL_SPORT0_TFS, 0},
|
|
{P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, P_SPORT1_DRPRI,
|
|
P_SPORT1_RSCLK, P_SPORT1_TFS, 0} };
|
|
|
|
static int bf5xx_tdm_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* interface format:support TDM,slave mode */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "%s: Unknown DAI format type\n", __func__);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
ret = -EINVAL;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "%s: Unknown DAI master type\n", __func__);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bf5xx_tdm_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
int ret = 0;
|
|
|
|
bf5xx_tdm.tcr2 &= ~0x1f;
|
|
bf5xx_tdm.rcr2 &= ~0x1f;
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
bf5xx_tdm.tcr2 |= 31;
|
|
bf5xx_tdm.rcr2 |= 31;
|
|
sport_handle->wdsize = 4;
|
|
break;
|
|
/* at present, we only support 32bit transfer */
|
|
default:
|
|
pr_err("not supported PCM format yet\n");
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (!bf5xx_tdm.configured) {
|
|
/*
|
|
* TX and RX are not independent,they are enabled at the
|
|
* same time, even if only one side is running. So, we
|
|
* need to configure both of them at the time when the first
|
|
* stream is opened.
|
|
*
|
|
* CPU DAI:slave mode.
|
|
*/
|
|
ret = sport_config_rx(sport_handle, bf5xx_tdm.rcr1,
|
|
bf5xx_tdm.rcr2, 0, 0);
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
ret = sport_config_tx(sport_handle, bf5xx_tdm.tcr1,
|
|
bf5xx_tdm.tcr2, 0, 0);
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
bf5xx_tdm.configured = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bf5xx_tdm_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
/* No active stream, SPORT is allowed to be configured again. */
|
|
if (!dai->active)
|
|
bf5xx_tdm.configured = 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bf5xx_tdm_suspend(struct snd_soc_dai *dai)
|
|
{
|
|
struct sport_device *sport =
|
|
(struct sport_device *)dai->private_data;
|
|
|
|
if (!dai->active)
|
|
return 0;
|
|
if (dai->capture.active)
|
|
sport_rx_stop(sport);
|
|
if (dai->playback.active)
|
|
sport_tx_stop(sport);
|
|
return 0;
|
|
}
|
|
|
|
static int bf5xx_tdm_resume(struct snd_soc_dai *dai)
|
|
{
|
|
int ret;
|
|
struct sport_device *sport =
|
|
(struct sport_device *)dai->private_data;
|
|
|
|
if (!dai->active)
|
|
return 0;
|
|
|
|
ret = sport_set_multichannel(sport, 8, 0xFF, 1);
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
ret = -EBUSY;
|
|
}
|
|
|
|
ret = sport_config_rx(sport, IRFS, 0x1F, 0, 0);
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
ret = -EBUSY;
|
|
}
|
|
|
|
ret = sport_config_tx(sport, ITFS, 0x1F, 0, 0);
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
ret = -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define bf5xx_tdm_suspend NULL
|
|
#define bf5xx_tdm_resume NULL
|
|
#endif
|
|
|
|
static struct snd_soc_dai_ops bf5xx_tdm_dai_ops = {
|
|
.hw_params = bf5xx_tdm_hw_params,
|
|
.set_fmt = bf5xx_tdm_set_dai_fmt,
|
|
.shutdown = bf5xx_tdm_shutdown,
|
|
};
|
|
|
|
struct snd_soc_dai bf5xx_tdm_dai = {
|
|
.name = "bf5xx-tdm",
|
|
.id = 0,
|
|
.suspend = bf5xx_tdm_suspend,
|
|
.resume = bf5xx_tdm_resume,
|
|
.playback = {
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
.rates = SNDRV_PCM_RATE_48000,
|
|
.formats = SNDRV_PCM_FMTBIT_S32_LE,},
|
|
.capture = {
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
.rates = SNDRV_PCM_RATE_48000,
|
|
.formats = SNDRV_PCM_FMTBIT_S32_LE,},
|
|
.ops = &bf5xx_tdm_dai_ops,
|
|
};
|
|
EXPORT_SYMBOL_GPL(bf5xx_tdm_dai);
|
|
|
|
static int __devinit bfin_tdm_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (peripheral_request_list(&sport_req[sport_num][0], "soc-audio")) {
|
|
pr_err("Requesting Peripherals failed\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* request DMA for SPORT */
|
|
sport_handle = sport_init(&sport_params[sport_num], 4, \
|
|
8 * sizeof(u32), NULL);
|
|
if (!sport_handle) {
|
|
peripheral_free_list(&sport_req[sport_num][0]);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* SPORT works in TDM mode */
|
|
ret = sport_set_multichannel(sport_handle, 8, 0xFF, 1);
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
ret = -EBUSY;
|
|
goto sport_config_err;
|
|
}
|
|
|
|
ret = sport_config_rx(sport_handle, IRFS, 0x1F, 0, 0);
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
ret = -EBUSY;
|
|
goto sport_config_err;
|
|
}
|
|
|
|
ret = sport_config_tx(sport_handle, ITFS, 0x1F, 0, 0);
|
|
if (ret) {
|
|
pr_err("SPORT is busy!\n");
|
|
ret = -EBUSY;
|
|
goto sport_config_err;
|
|
}
|
|
|
|
ret = snd_soc_register_dai(&bf5xx_tdm_dai);
|
|
if (ret) {
|
|
pr_err("Failed to register DAI: %d\n", ret);
|
|
goto sport_config_err;
|
|
}
|
|
return 0;
|
|
|
|
sport_config_err:
|
|
peripheral_free_list(&sport_req[sport_num][0]);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit bfin_tdm_remove(struct platform_device *pdev)
|
|
{
|
|
peripheral_free_list(&sport_req[sport_num][0]);
|
|
snd_soc_unregister_dai(&bf5xx_tdm_dai);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver bfin_tdm_driver = {
|
|
.probe = bfin_tdm_probe,
|
|
.remove = __devexit_p(bfin_tdm_remove),
|
|
.driver = {
|
|
.name = "bfin-tdm",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init bfin_tdm_init(void)
|
|
{
|
|
return platform_driver_register(&bfin_tdm_driver);
|
|
}
|
|
module_init(bfin_tdm_init);
|
|
|
|
static void __exit bfin_tdm_exit(void)
|
|
{
|
|
platform_driver_unregister(&bfin_tdm_driver);
|
|
}
|
|
module_exit(bfin_tdm_exit);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Barry Song");
|
|
MODULE_DESCRIPTION("TDM driver for ADI Blackfin");
|
|
MODULE_LICENSE("GPL");
|
|
|