linux/arch/microblaze/Makefile
Arnd Bergmann 71e7673dad microblaze: fix endian handling
Building an allmodconfig kernel fails horribly because of
endian mismatch. It turns out that the -mlittle-endian
switch was not honored at all as we were using the wrong
Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS.
Finally, the linker flags did not get set right.

This addresses all three of those issues, which now lets
me build both big-endian and little-endian kernels for
testing.

Fixes: 428dbf156c ("arch: change default endian for microblaze")
Fixes: 206d3642d8 ("arch/microblaze: add choice for endianness and update Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-17 13:34:28 +01:00

107 lines
3.4 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
KBUILD_DEFCONFIG := mmu_defconfig
ifeq ($(CONFIG_MMU),y)
UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
else
UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
endif
# What CPU vesion are we building for, and crack it open
# as major.minor.rev
CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
CPU_REV := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
# Use cpu-related CONFIG_ vars to set compile options.
# The various CONFIG_XILINX cpu features options are integers 0/1/2...
# rather than bools y/n
# Work out HW multipler support. This is tricky.
# 1. Spartan2 has no HW multipliers.
# 2. MicroBlaze v3.x always uses them, except in Spartan 2
# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
ifeq ($(CPU_MAJOR),3)
CPUFLAGS-1 += -mno-xl-soft-mul
else
# USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
endif
endif
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
ifdef CONFIG_CPU_BIG_ENDIAN
KBUILD_CFLAGS += -mbig-endian
KBUILD_AFLAGS += -mbig-endian
LD += -EB
else
KBUILD_CFLAGS += -mlittle-endian
KBUILD_AFLAGS += -mlittle-endian
LD += -EL
endif
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# r31 holds current when in kernel mode
KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-y) $(CPUFLAGS-1) $(CPUFLAGS-2)
head-y := arch/microblaze/kernel/head.o
libs-y += arch/microblaze/lib/
core-y += arch/microblaze/kernel/
core-y += arch/microblaze/mm/
core-$(CONFIG_PCI) += arch/microblaze/pci/
drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
boot := arch/microblaze/boot
# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
ifneq ($(DTB),)
core-y += $(boot)/dts/
endif
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
MMU := -nommu
endif
export MMU DTB
all: linux.bin
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
linux.bin linux.bin.gz linux.bin.ub: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
simpleImage.%: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
define archhelp
echo '* linux.bin - Create raw binary'
echo ' linux.bin.gz - Create compressed raw binary'
echo ' linux.bin.ub - Create U-Boot wrapped raw binary'
echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
echo ' - stripped elf with fdt blob'
echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob'
echo ' *_defconfig - Select default config from arch/microblaze/configs'
echo ''
echo ' Targets with <dt> embed a device tree blob inside the image'
echo ' These targets support board with firmware that does not'
echo ' support passing a device tree directly. Replace <dt> with the'
echo ' name of a dts file from the arch/microblaze/boot/dts/ directory'
echo ' (minus the .dts extension).'
endef
MRPROPER_FILES += $(boot)/simpleImage.*