linux/arch/powerpc/mm/8xx_mmu.c
Christophe Leroy 766d45cbee powerpc/8xx: rewrite flush_instruction_cache() in C
On PPC8xx, flushing instruction cache is performed by writing
in register SPRN_IC_CST. This registers suffers CPU6 ERRATA.
The patch rewrites the fonction in C so that CPU6 ERRATA will
be handled transparently

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-03-11 17:20:11 -06:00

142 lines
3.5 KiB
C

/*
* This file contains the routines for initializing the MMU
* on the 8xx series of chips.
* -- christophe
*
* Derived from arch/powerpc/mm/40x_mmu.c:
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/memblock.h>
#include "mmu_decl.h"
extern int __map_without_ltlbs;
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
*/
void __init MMU_init_hw(void)
{
/* Nothing to do for the time being but keep it similar to other PPC */
}
#define LARGE_PAGE_SIZE_4M (1<<22)
#define LARGE_PAGE_SIZE_8M (1<<23)
#define LARGE_PAGE_SIZE_64M (1<<26)
unsigned long __init mmu_mapin_ram(unsigned long top)
{
unsigned long v, s, mapped;
phys_addr_t p;
v = KERNELBASE;
p = 0;
s = top;
if (__map_without_ltlbs)
return 0;
#ifdef CONFIG_PPC_4K_PAGES
while (s >= LARGE_PAGE_SIZE_8M) {
pmd_t *pmdp;
unsigned long val = p | MD_PS8MEG;
pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
*pmdp++ = __pmd(val);
*pmdp++ = __pmd(val + LARGE_PAGE_SIZE_4M);
v += LARGE_PAGE_SIZE_8M;
p += LARGE_PAGE_SIZE_8M;
s -= LARGE_PAGE_SIZE_8M;
}
#else /* CONFIG_PPC_16K_PAGES */
while (s >= LARGE_PAGE_SIZE_64M) {
pmd_t *pmdp;
unsigned long val = p | MD_PS8MEG;
pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
*pmdp++ = __pmd(val);
v += LARGE_PAGE_SIZE_64M;
p += LARGE_PAGE_SIZE_64M;
s -= LARGE_PAGE_SIZE_64M;
}
#endif
mapped = top - s;
/* If the size of RAM is not an exact power of two, we may not
* have covered RAM in its entirety with 8 MiB
* pages. Consequently, restrict the top end of RAM currently
* allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
* coverage with normal-sized pages (or other reasons) do not
* attempt to allocate outside the allowed range.
*/
memblock_set_current_limit(mapped);
return mapped;
}
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
{
/* We don't currently support the first MEMBLOCK not mapping 0
* physical on those processors
*/
BUG_ON(first_memblock_base != 0);
#ifdef CONFIG_PIN_TLB
/* 8xx can only access 24MB at the moment */
memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
#else
/* 8xx can only access 8MB at the moment */
memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
#endif
}
/*
* Set up to use a given MMU context.
* id is context number, pgd is PGD pointer.
*
* We place the physical address of the new task page directory loaded
* into the MMU base register, and set the ASID compare register with
* the new "context."
*/
void set_context(unsigned long id, pgd_t *pgd)
{
s16 offset = (s16)(__pa(swapper_pg_dir));
#ifdef CONFIG_BDI_SWITCH
pgd_t **ptr = *(pgd_t ***)(KERNELBASE + 0xf0);
/* Context switch the PTE pointer for the Abatron BDI2000.
* The PGDIR is passed as second argument.
*/
*(ptr + 1) = pgd;
#endif
/* Register M_TW will contain base address of level 1 table minus the
* lower part of the kernel PGDIR base address, so that all accesses to
* level 1 table are done relative to lower part of kernel PGDIR base
* address.
*/
mtspr(SPRN_M_TW, __pa(pgd) - offset);
/* Update context */
mtspr(SPRN_M_CASID, id);
/* sync */
mb();
}
void flush_instruction_cache(void)
{
isync();
mtspr(SPRN_IC_CST, IDC_INVALL);
isync();
}