linux/lib/Makefile
Linus Torvalds b293fca43b RISC-V Port for Linux 4.15 v9
This tag contains the core RISC-V Linux port, which has been through
 nine rounds of review on various mailing lists.  The port is not
 complete: there's some cleanup patches moving through the review
 process, a whole bunch of drivers that need some work, and a lot of
 feature additions that will be needed.
 
 The patches contained in this tag have been through nine rounds of
 review on the various mailing lists.  I have some outstanding cleanup
 patches, but since there's been so much review on these patches I
 thought it would be best to submit them as-is and then submit explicit
 cleanup patches so everyone can review them.  This first patch set is
 big enough that it's a bit of a pain to constantly rewrite, and it's
 caused a few headaches with various contributors.
 
 The port is definately a work in progress.  While what's there builds
 and boots with 4.14, it's a bit hard to actually see anything happen
 because there are no device drivers yet.  I maintain a staging branch
 that contains all the device drivers and cleanup that actually works,
 but those patches won't all be ready for a while.  I'd like to get what
 we currently have into your tree so everyone can start working from a
 single base -- of particular importance is allowing the glibc
 upstreaming process to proceed so we can sort out any possibly lingering
 user-visible ABI problems we might have.
 
 Copied below is the ChangeLog that contains the history of this patch
 set:
 
 (v9) As per suggestions on our v8 patch set, I've split the core architecture code
 out from our drivers and would like to submit this patch set to be included
 into linux-next, with the goal being to be merged in during the next merge
 window.  This patch set is based on 4.14-rc2, but if it's better to have it
 based on something else then I can change it around.
 
 This patch set contains just the core arch code for RISC-V, so while it builds
 an nominally boots, you can't print or take an interrupt so it's not that
 useful.  If you're looking to actually boot a system it would probably be
 better to use the full patch set listed below.
 
 We've collected a handful of tags from reviewers, and the remainder of the
 patch set only got minimal feedback last time.  Here's what changed:
 
  * We now use the device tree to initialize the timer driver so it's less
    tighly coupled with the arch port.
  * I cleaned up the defconfigs -- there's actually now just one, and it's
    empty.  For now I think we're OK with what the kernel sets as defaults, but
    I anticipate we'll begin to expand this as people start to use the port
    more.
  * The VDSO symbols version is sane.
  * We WFI while spinning in the boot loop.
  * A handful of comments have been added.
 
 While there are still a handful of FIXMEs in this patch set, we've started to
 get enough interest from various users and contributors that maintaining an out
 of tree patch set is starting to become a big burden.  Hopefully the patches
 are good enough to merge now, which will at least get everyone working in a
 more reasonable manner as we clean up the remaining issues.
 
 This patch set is also availiable on github
 
   https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9-arch
 
 as is the entire patch set necessary to get a more functional RISC-V system up
 and running, including a handful of patches that aren't ready for upstream yet.
 
   https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9
 
 Hopefully I've managed to get everyone's feedback
 
 Here's the change highlights from the whole patch set:
 
 (v8) I know it may not be the ideal time to submit a patch set right now, as
 it's the middle of the merge window, but things have calmed down quite a bit in
 the last month so I thought it would be good to get everyone on the same page.
 There's been a handful of changes since the last patch set, but most of them
 are fairly minor:
 
 * We changed PAGE_OFFSET to allowing mapping more physical memory on 64-bit
   systems.  This is user configurable, as it triggers a different code model
   that generates slightly less efficient code.
 * The device tree binding documentation is back, I'd managed to lose it at some
   point.
 * We now pass the atomic64 test suite.  The SBI timer driver has been
 * refactored.
 
 (v7) It's been a while since my last patch set, but the changes han been fairly
 minimal:
 
  * The PCI cleanup patches have been dropped, we'll do them as a separate patch
    set later.
  * We've the Kconfig entries from CONFIG_ISA_* to CONFIG_RISCV_ISA_*, to make
    grep easier.
  * There have been a handful of memory model related tweaks in I/O land,
    particularly relating the PCI and the upcoming platform specification.
    There are significant comments in the relevant files.  This is still a WIP,
    but I think we're close to getting as good as we're going to get until we
    end up with some more specifications.
 
 (v6) As it's been only a day since the v5 patch set, the changes are pretty
 minimal:
 
  * The patch set is now based on linux-next/master, which I believe is a better
    base now that we're getting closer to upstream.
  * EARLY_PRINTK is no longer an option.  Since the SBI console is reasonable,
    there's no penalty to enabling it (and thus no benefit to disabling it).
  * The mmap syscalls were refactored a bit.
 
 (v5) Things have really started to calm down, so this is fairly similar to the
 v4 patch set.  The most interesting changes include:
 
  * We've moved back to a single patch set.
 
  * SMP support has been fixed, I was accidentally running on a non-SMP
    configuration.  There were various mistakes all over the tree as a result of
    this.
 
  * The cmpxchg syscalls have been removed, as they were deemed a bad idea.  As
    a result, RISC-V Linux systems mandate the A extension.  The corresponding
    Kconfig entry to enable builds on non-A systems has been removed.
 
  * A few more atomic fixes: mostly fence changes, but those resulted in a
    handful of additional macros that were no longer necessary.
 
  * riscv_early_sie has been removed.
 
 (v4) There have only been a few changes since the v3 patch set:
 
  * The cmpxchg64 syscall is no longer enabled on 32-bit systems.  It's not
    possible to provide this on SMP systems, and it's not necessary as glibc
    knows not to call it.
 
  * We provide a ELF_HWCAP so users can determine the ISA of the machine the
    kernel is running on.
 
  * The multi-line comments are in a better form.
 
  * There were a handful of headers that could be replaced with the asm-generic
    versions, and a few unnecessary definitions.
 
  * We no longer use printk, but instead use pr_*.
 
  * A few Kconfig and defconfig entries have been cleaned up.
 
 (v3) A highlight of the changes since the v2 patch set includes:
 
  * We've split out all our drivers into separate patch sets, which I've already
    sent out to the relevant maintainers.  I haven't included those patches in
    this patch set, but some of them are necessary to build our port.  A git
    tree that contains all our patch sets merged together lives at
    <https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v3>.
 
  * The patch set is now split up differently: rather than being split per
    directory it is split per topic.  Hopefully this will make it easier to
    review the port on the mailing list.  The split is a bit rough, so you
    probably still want to look at the patch set as a whole.
 
  * atomic.h has been completely rewritten and is hopefully now correct.  I've
    attempted to sanitize the various other memory model related code as well,
    and I think it should all be sane now aside from a handful of FIXMEs
    commented in the code.
 
  * We've changed the cmpexchg syscall to always exist and to not be
    multiplexed.  There is also a VDSO entry for compare and exchange, which
    allows kernels with the A extension to execute user code without the A
    extension reasonably fast.
 
  * Our user-visible register state now contains enough space for the Q
    extension for 128-bit floating point, as well as a few words to allow
    extensibility to future ISA extensions like the eventual V extension for
    vectors.
 
  * A handful of driver cleanups, but these have been split into separate patch
    sets now so I won't duplicate them here.
 
 (v2) A highlight of the changes since the v1 patch set includes:
 
   * We've split out our drivers into the right places, which means now there's
     a lot more patches.  I'll be submitting these patches to various subsystem
     maintainers and including them in any future RISC-V patch sets until
     they've been merged.
 
   * The SBI console driver has been completely rewritten to use the HVC helpers
     and is now significantly smaller.
 
   * We've begun to use weaker barriers as opposed to just the big "fence".
     There's still some work to do here, specifically:
     - We need fences in the relaxed MMIO functions.
     - The non-relaxed MMIO functions are missing R/W bits on their fences.
     - Many AMOs need the aq and rl bits set.
 
   * We now have thread_info in task_struct.  As a result, sscratch now contains
     TP instead of SP.  This was necessary because thread_info is no longer on
     the stack.
 
   * A few shared routines have been added that we use instead of creating
     another arch copy.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAloLD8sTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQbCZEAC2IgWFOAhYDIv4s39jC/iuGcofuuwC
 atTVgKSM8tUES5wBomoVxRH1yjDvmyb2jeq3gsp6gWPcchUpLMdfwf2MwW3NV3Mw
 ESCZPwYiuFhORh1Jt5RSespjK+V9qMvCW0iU6cPE/9kAlPfMGGDv2vEttOFgOGEm
 yVb1i0gHBcdzbw5H0xszBionUAQVXOFqkfO8AW8VPtFMdzZB6t9OBXRgHJLdWgmK
 2Zr5pFN75uivNh4RI1KXHpUeD1kLRVICzG7Ak/aQCfKxWsJutFI1dnLFZmFOIoTf
 2wgW4KsDsZakcA9rILtfo3SFH+mSD5PWzvv5G44yf9sEkGG9bSgxl29GeJYL7NzG
 3Da9FVMvzjIhmxamPGHfFOFTxTud9+6GU6Lj0iBLpHzpcttjhNgE2NXzcY8r1uMD
 BcSwkK3duybjeiZLpwnxOywZidCQDv6pZYyc50WBtV/oUG1fncj8DT2ZTIqGv1V8
 L6D/MXSr1jt9oJeWzfDCxHlaGaHL6grrmyJ8L1tQKPjMp+DbBPFbMLfvbn/dlsat
 mPqmfQZ4zydOVO53k6KiHozGQh6K+cuXMvNxrb9pCRy3etFV2wfTNxtbdeJSa7gj
 xarC6vSia8KFVyXp5nydSks5woHGJFQ1kQYSLEORUWiL5zWILbtI6POzOZeYHgej
 BvTzVq0AVIbxjA==
 =xDIk
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux

Pull RISC-V architecture support from Palmer Dabbelt:
 "This contains the core RISC-V Linux port, which has been through nine
  rounds of review on various mailing lists. The port is not complete:
  there's some cleanup patches moving through the review process, a
  whole bunch of drivers that need some work, and a lot of feature
  additions that will be needed.

  The patches contained in this tag have been through nine rounds of
  review on the various mailing lists. I have some outstanding cleanup
  patches, but since there's been so much review on these patches I
  thought it would be best to submit them as-is and then submit explicit
  cleanup patches so everyone can review them. This first patch set is
  big enough that it's a bit of a pain to constantly rewrite, and it's
  caused a few headaches with various contributors.

  The port is definately a work in progress. While what's there builds
  and boots with 4.14, it's a bit hard to actually see anything happen
  because there are no device drivers yet. I maintain a staging branch
  that contains all the device drivers and cleanup that actually works,
  but those patches won't all be ready for a while. I'd like to get what
  we currently have into your tree so everyone can start working from a
  single base -- of particular importance is allowing the glibc
  upstreaming process to proceed so we can sort out any possibly
  lingering user-visible ABI problems we might have.

  Copied below is the ChangeLog that contains the history of this patch
  set:

   (v9) As per suggestions on our v8 patch set, I've split the core
        architecture code out from our drivers and would like to submit
        this patch set to be included into linux-next, with the goal
        being to be merged in during the next merge window. This patch
        set is based on 4.14-rc2, but if it's better to have it based on
        something else then I can change it around.

        This patch set contains just the core arch code for RISC-V, so
        while it builds an nominally boots, you can't print or take an
        interrupt so it's not that useful. If you're looking to actually
        boot a system it would probably be better to use the full patch
        set listed below.

        We've collected a handful of tags from reviewers, and the
        remainder of the patch set only got minimal feedback last time.
        Here's what changed:

         - We now use the device tree to initialize the timer driver so
           it's less tighly coupled with the arch port.

         - I cleaned up the defconfigs -- there's actually now just one,
           and it's empty. For now I think we're OK with what the kernel
           sets as defaults, but I anticipate we'll begin to expand this
           as people start to use the port more.

         - The VDSO symbols version is sane.

         - We WFI while spinning in the boot loop.

         - A handful of comments have been added.

        While there are still a handful of FIXMEs in this patch set,
        we've started to get enough interest from various users and
        contributors that maintaining an out of tree patch set is
        starting to become a big burden. Hopefully the patches are good
        enough to merge now, which will at least get everyone working in
        a more reasonable manner as we clean up the remaining issues.

   (v8) I know it may not be the ideal time to submit a patch set right
        now, as it's the middle of the merge window, but things have
        calmed down quite a bit in the last month so I thought it would
        be good to get everyone on the same page. There's been a handful
        of changes since the last patch set, but most of them are fairly
        minor:

         - We changed PAGE_OFFSET to allowing mapping more physical
           memory on 64-bit systems. This is user configurable, as it
           triggers a different code model that generates slightly less
           efficient code.

         - The device tree binding documentation is back, I'd managed to
           lose it at some point.

         - We now pass the atomic64 test suite

         - The SBI timer driver has been refactored.

   (v7) It's been a while since my last patch set, but the changes han
        been fairly minimal:

         - The PCI cleanup patches have been dropped, we'll do them as a
           separate patch set later.

         - We've the Kconfig entries from CONFIG_ISA_* to
           CONFIG_RISCV_ISA_*, to make grep easier.

         - There have been a handful of memory model related tweaks in
           I/O land, particularly relating the PCI and the upcoming
           platform specification. There are significant comments in the
           relevant files. This is still a WIP, but I think we're close
           to getting as good as we're going to get until we end up with
           some more specifications.

   (v6) As it's been only a day since the v5 patch set, the changes are
        pretty minimal:

         - The patch set is now based on linux-next/master, which I
           believe is a better base now that we're getting closer to
           upstream.

         - EARLY_PRINTK is no longer an option. Since the SBI console is
           reasonable, there's no penalty to enabling it (and thus no
           benefit to disabling it).

         - The mmap syscalls were refactored a bit.

   (v5) Things have really started to calm down, so this is fairly
        similar to the v4 patch set. The most interesting changes
        include:

         - We've moved back to a single patch set.

         - SMP support has been fixed, I was accidentally running on a
           non-SMP configuration. There were various mistakes all over
           the tree as a result of this.

         - The cmpxchg syscalls have been removed, as they were deemed a
           bad idea. As a result, RISC-V Linux systems mandate the A
           extension. The corresponding Kconfig entry to enable builds
           on non-A systems has been removed.

         - A few more atomic fixes: mostly fence changes, but those
           resulted in a handful of additional macros that were no
           longer necessary.

         - riscv_early_sie has been removed.

   (v4) There have only been a few changes since the v3 patch set:

         - The cmpxchg64 syscall is no longer enabled on 32-bit systems.
           It's not possible to provide this on SMP systems, and it's
           not necessary as glibc knows not to call it.

         - We provide a ELF_HWCAP so users can determine the ISA of the
           machine the kernel is running on.

         - The multi-line comments are in a better form.

         - There were a handful of headers that could be replaced with
           the asm-generic versions, and a few unnecessary definitions.

         - We no longer use printk, but instead use pr_*.

         - A few Kconfig and defconfig entries have been cleaned up.

   (v3) A highlight of the changes since the v2 patch set includes:

         - We've split out all our drivers into separate patch sets,
           which I've already sent out to the relevant maintainers. I
           haven't included those patches in this patch set, but some of
           them are necessary to build our port.

         - The patch set is now split up differently: rather than being
           split per directory it is split per topic. Hopefully this
           will make it easier to review the port on the mailing list.
           The split is a bit rough, so you probably still want to look
           at the patch set as a whole.

         - atomic.h has been completely rewritten and is hopefully now
           correct. I've attempted to sanitize the various other memory
           model related code as well, and I think it should all be sane
           now aside from a handful of FIXMEs commented in the code.

         - We've changed the cmpexchg syscall to always exist and to not
           be multiplexed. There is also a VDSO entry for compare and
           exchange, which allows kernels with the A extension to
           execute user code without the A extension reasonably fast.

         - Our user-visible register state now contains enough space for
           the Q extension for 128-bit floating point, as well as a few
           words to allow extensibility to future ISA extensions like
           the eventual V extension for vectors.

         - A handful of driver cleanups, but these have been split into
           separate patch sets now so I won't duplicate them here.

   (v2) A highlight of the changes since the v1 patch set includes:

         - We've split out our drivers into the right places, which
           means now there's a lot more patches. I'll be submitting
           these patches to various subsystem maintainers and including
           them in any future RISC-V patch sets until they've been
           merged.

         - The SBI console driver has been completely rewritten to use
           the HVC helpers and is now significantly smaller.

         - We've begun to use weaker barriers as opposed to just the big
           "fence". There's still some work to do here, specifically:
            - We need fences in the relaxed MMIO functions.
            - The non-relaxed MMIO functions are missing R/W bits on their fences.
            - Many AMOs need the aq and rl bits set.

         - We now have thread_info in task_struct. As a result, sscratch
           now contains TP instead of SP. This was necessary because
           thread_info is no longer on the stack.

         - A few shared routines have been added that we use instead of
           creating another arch copy"

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
  RISC-V: Build Infrastructure
  RISC-V: User-facing API
  RISC-V: Paging and MMU
  RISC-V: Device, timer, IRQs, and the SBI
  RISC-V: Task implementation
  RISC-V: ELF and module implementation
  RISC-V: Generic library routines and assembly
  RISC-V: Atomic and Locking Code
  RISC-V: Init and Halt Code
  dt-bindings: RISC-V CPU Bindings
  lib: Add shared copies of some GCC library routines
  MAINTAINERS: Add RISC-V
2017-11-15 10:49:15 -08:00

259 lines
8.2 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for some libs needed in the kernel.
#
ifdef CONFIG_FUNCTION_TRACER
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
endif
# These files are disabled because they produce lots of non-interesting and/or
# flaky coverage that is not a function of syscall inputs. For example,
# rbtree can be global and individual rotations don't correlate with inputs.
KCOV_INSTRUMENT_string.o := n
KCOV_INSTRUMENT_rbtree.o := n
KCOV_INSTRUMENT_list_debug.o := n
KCOV_INSTRUMENT_debugobjects.o := n
KCOV_INSTRUMENT_dynamic_debug.o := n
lib-y := ctype.o string.o vsprintf.o cmdline.o \
rbtree.o radix-tree.o dump_stack.o timerqueue.o\
idr.o int_sqrt.o extable.o \
sha1.o chacha20.o irq_regs.o argv_split.o \
flex_proportions.o ratelimit.o show_mem.o \
is_single_threaded.o plist.o decompress.o kobject_uevent.o \
earlycpio.o seq_buf.o siphash.o \
nmi_backtrace.o nodemask.o win_minmax.o
lib-$(CONFIG_MMU) += ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
lib-$(CONFIG_DMA_NOOP_OPS) += dma-noop.o
lib-$(CONFIG_DMA_VIRT_OPS) += dma-virt.o
lib-y += kobject.o klist.o
obj-y += lockref.o
obj-y += bcd.o div64.o sort.o parser.o debug_locks.o random32.o \
bust_spinlocks.o kasprintf.o bitmap.o scatterlist.o \
gcd.o lcm.o list_sort.o uuid.o flex_array.o iov_iter.o clz_ctz.o \
bsearch.o find_bit.o llist.o memweight.o kfifo.o \
percpu-refcount.o percpu_ida.o rhashtable.o reciprocal_div.o \
once.o refcount.o usercopy.o errseq.o
obj-y += string_helpers.o
obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
obj-y += hexdump.o
obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o
obj-y += kstrtox.o
obj-$(CONFIG_TEST_BPF) += test_bpf.o
obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
obj-$(CONFIG_TEST_SYSCTL) += test_sysctl.o
obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
obj-$(CONFIG_TEST_KASAN) += test_kasan.o
obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o
obj-$(CONFIG_TEST_LKM) += test_module.o
obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o
obj-$(CONFIG_TEST_SORT) += test_sort.o
obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
obj-$(CONFIG_TEST_PRINTF) += test_printf.o
obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
obj-$(CONFIG_TEST_UUID) += test_uuid.o
obj-$(CONFIG_TEST_PARMAN) += test_parman.o
obj-$(CONFIG_TEST_KMOD) += test_kmod.o
obj-$(CONFIG_TEST_DEBUG_VIRTUAL) += test_debug_virtual.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
CFLAGS_kobject_uevent.o += -DDEBUG
endif
obj-$(CONFIG_DEBUG_INFO_REDUCED) += debug_info.o
CFLAGS_debug_info.o += $(call cc-option, -femit-struct-debug-detailed=any)
obj-$(CONFIG_GENERIC_IOMAP) += iomap.o
obj-$(CONFIG_GENERIC_PCI_IOMAP) += pci_iomap.o
obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_BTREE) += btree.o
obj-$(CONFIG_INTERVAL_TREE) += interval_tree.o
obj-$(CONFIG_ASSOCIATIVE_ARRAY) += assoc_array.o
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
obj-$(CONFIG_DEBUG_LIST) += list_debug.o
obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
ifneq ($(CONFIG_HAVE_DEC_LOCK),y)
lib-y += dec_and_lock.o
endif
obj-$(CONFIG_BITREVERSE) += bitrev.o
obj-$(CONFIG_RATIONAL) += rational.o
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
obj-$(CONFIG_CRC16) += crc16.o
obj-$(CONFIG_CRC_T10DIF)+= crc-t10dif.o
obj-$(CONFIG_CRC_ITU_T) += crc-itu-t.o
obj-$(CONFIG_CRC32) += crc32.o
obj-$(CONFIG_CRC32_SELFTEST) += crc32test.o
obj-$(CONFIG_CRC4) += crc4.o
obj-$(CONFIG_CRC7) += crc7.o
obj-$(CONFIG_LIBCRC32C) += libcrc32c.o
obj-$(CONFIG_CRC8) += crc8.o
obj-$(CONFIG_XXHASH) += xxhash.o
obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
obj-$(CONFIG_842_COMPRESS) += 842/
obj-$(CONFIG_842_DECOMPRESS) += 842/
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_BCH) += bch.o
obj-$(CONFIG_LZO_COMPRESS) += lzo/
obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
obj-$(CONFIG_LZ4_COMPRESS) += lz4/
obj-$(CONFIG_LZ4HC_COMPRESS) += lz4/
obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/
obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
obj-$(CONFIG_XZ_DEC) += xz/
obj-$(CONFIG_RAID6_PQ) += raid6/
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
lib-$(CONFIG_DECOMPRESS_XZ) += decompress_unxz.o
lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
lib-$(CONFIG_DECOMPRESS_LZ4) += decompress_unlz4.o
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o
obj-$(CONFIG_TEXTSEARCH_FSM) += ts_fsm.o
obj-$(CONFIG_SMP) += percpu_counter.o
obj-$(CONFIG_AUDIT_GENERIC) += audit.o
obj-$(CONFIG_AUDIT_COMPAT_GENERIC) += compat_audit.o
obj-$(CONFIG_SWIOTLB) += swiotlb.o
obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o iommu-common.o
obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
obj-$(CONFIG_NOTIFIER_ERROR_INJECTION) += notifier-error-inject.o
obj-$(CONFIG_PM_NOTIFIER_ERROR_INJECT) += pm-notifier-error-inject.o
obj-$(CONFIG_NETDEV_NOTIFIER_ERROR_INJECT) += netdev-notifier-error-inject.o
obj-$(CONFIG_MEMORY_NOTIFIER_ERROR_INJECT) += memory-notifier-error-inject.o
obj-$(CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT) += \
of-reconfig-notifier-error-inject.o
lib-$(CONFIG_GENERIC_BUG) += bug.o
obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
obj-$(CONFIG_DYNAMIC_DEBUG) += dynamic_debug.o
obj-$(CONFIG_NLATTR) += nlattr.o
obj-$(CONFIG_LRU_CACHE) += lru_cache.o
obj-$(CONFIG_DMA_API_DEBUG) += dma-debug.o
obj-$(CONFIG_GENERIC_CSUM) += checksum.o
obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o
obj-$(CONFIG_ATOMIC64_SELFTEST) += atomic64_test.o
obj-$(CONFIG_CPU_RMAP) += cpu_rmap.o
obj-$(CONFIG_CORDIC) += cordic.o
obj-$(CONFIG_DQL) += dynamic_queue_limits.o
obj-$(CONFIG_GLOB) += glob.o
obj-$(CONFIG_GLOB_SELFTEST) += globtest.o
obj-$(CONFIG_MPILIB) += mpi/
obj-$(CONFIG_SIGNATURE) += digsig.o
lib-$(CONFIG_CLZ_TAB) += clz_tab.o
obj-$(CONFIG_DDR) += jedec_ddr_data.o
obj-$(CONFIG_GENERIC_STRNCPY_FROM_USER) += strncpy_from_user.o
obj-$(CONFIG_GENERIC_STRNLEN_USER) += strnlen_user.o
obj-$(CONFIG_GENERIC_NET_UTILS) += net_utils.o
obj-$(CONFIG_SG_SPLIT) += sg_split.o
obj-$(CONFIG_SG_POOL) += sg_pool.o
obj-$(CONFIG_STMP_DEVICE) += stmp_device.o
obj-$(CONFIG_IRQ_POLL) += irq_poll.o
obj-$(CONFIG_STACKDEPOT) += stackdepot.o
KASAN_SANITIZE_stackdepot.o := n
KCOV_INSTRUMENT_stackdepot.o := n
libfdt_files = fdt.o fdt_ro.o fdt_wip.o fdt_rw.o fdt_sw.o fdt_strerror.o \
fdt_empty_tree.o
$(foreach file, $(libfdt_files), \
$(eval CFLAGS_$(file) = -I$(src)/../scripts/dtc/libfdt))
lib-$(CONFIG_LIBFDT) += $(libfdt_files)
obj-$(CONFIG_RBTREE_TEST) += rbtree_test.o
obj-$(CONFIG_INTERVAL_TREE_TEST) += interval_tree_test.o
obj-$(CONFIG_PERCPU_TEST) += percpu_test.o
obj-$(CONFIG_ASN1) += asn1_decoder.o
obj-$(CONFIG_FONT_SUPPORT) += fonts/
obj-$(CONFIG_PRIME_NUMBERS) += prime_numbers.o
hostprogs-y := gen_crc32table
clean-files := crc32table.h
$(obj)/crc32.o: $(obj)/crc32table.h
quiet_cmd_crc32 = GEN $@
cmd_crc32 = $< > $@
$(obj)/crc32table.h: $(obj)/gen_crc32table
$(call cmd,crc32)
#
# Build a fast OID lookip registry from include/linux/oid_registry.h
#
obj-$(CONFIG_OID_REGISTRY) += oid_registry.o
$(obj)/oid_registry.o: $(obj)/oid_registry_data.c
$(obj)/oid_registry_data.c: $(srctree)/include/linux/oid_registry.h \
$(src)/build_OID_registry
$(call cmd,build_OID_registry)
quiet_cmd_build_OID_registry = GEN $@
cmd_build_OID_registry = perl $(srctree)/$(src)/build_OID_registry $< $@
clean-files += oid_registry_data.c
obj-$(CONFIG_UCS2_STRING) += ucs2_string.o
obj-$(CONFIG_UBSAN) += ubsan.o
UBSAN_SANITIZE_ubsan.o := n
obj-$(CONFIG_SBITMAP) += sbitmap.o
obj-$(CONFIG_PARMAN) += parman.o
# GCC library routines
obj-$(CONFIG_GENERIC_ASHLDI3) += ashldi3.o
obj-$(CONFIG_GENERIC_ASHRDI3) += ashrdi3.o
obj-$(CONFIG_GENERIC_LSHRDI3) += lshrdi3.o
obj-$(CONFIG_GENERIC_MULDI3) += muldi3.o
obj-$(CONFIG_GENERIC_CMPDI2) += cmpdi2.o
obj-$(CONFIG_GENERIC_UCMPDI2) += ucmpdi2.o