forked from Minki/linux
39f4034693
Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that produce, switch and output trace data from multiple hardware and software sources over several types of trace output ports encoded in System Trace Protocol (MIPI STPv2) and is intended to perform full system debugging. For these subdevices, we create a bus, where they can be discovered and configured by userspace software. This patch creates this bus infrastructure, three types of devices (source, output, switch), resource allocation, some callback mechanisms to facilitate communication between the subdevices' drivers and some common sysfs attributes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
172 lines
4.8 KiB
Makefile
172 lines
4.8 KiB
Makefile
#
|
|
# Makefile for the Linux kernel device drivers.
|
|
#
|
|
# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
|
|
# Rewritten to use lists instead of if-statements.
|
|
#
|
|
|
|
obj-y += irqchip/
|
|
obj-y += bus/
|
|
|
|
obj-$(CONFIG_GENERIC_PHY) += phy/
|
|
|
|
# GPIO must come after pinctrl as gpios may need to mux pins etc
|
|
obj-$(CONFIG_PINCTRL) += pinctrl/
|
|
obj-y += gpio/
|
|
obj-y += pwm/
|
|
obj-$(CONFIG_PCI) += pci/
|
|
obj-$(CONFIG_PARISC) += parisc/
|
|
obj-$(CONFIG_RAPIDIO) += rapidio/
|
|
obj-y += video/
|
|
obj-y += idle/
|
|
|
|
# IPMI must come before ACPI in order to provide IPMI opregion support
|
|
obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/
|
|
|
|
obj-$(CONFIG_ACPI) += acpi/
|
|
obj-$(CONFIG_SFI) += sfi/
|
|
# PnP must come after ACPI since it will eventually need to check if acpi
|
|
# was used and do nothing if so
|
|
obj-$(CONFIG_PNP) += pnp/
|
|
obj-y += amba/
|
|
# Many drivers will want to use DMA so this has to be made available
|
|
# really early.
|
|
obj-$(CONFIG_DMADEVICES) += dma/
|
|
|
|
# SOC specific infrastructure drivers.
|
|
obj-y += soc/
|
|
|
|
obj-$(CONFIG_VIRTIO) += virtio/
|
|
obj-$(CONFIG_XEN) += xen/
|
|
|
|
# regulators early, since some subsystems rely on them to initialize
|
|
obj-$(CONFIG_REGULATOR) += regulator/
|
|
|
|
# reset controllers early, since gpu drivers might rely on them to initialize
|
|
obj-$(CONFIG_RESET_CONTROLLER) += reset/
|
|
|
|
# tty/ comes before char/ so that the VT console is the boot-time
|
|
# default.
|
|
obj-y += tty/
|
|
obj-y += char/
|
|
|
|
# iommu/ comes before gpu as gpu are using iommu controllers
|
|
obj-$(CONFIG_IOMMU_SUPPORT) += iommu/
|
|
|
|
# gpu/ comes after char for AGP vs DRM startup and after iommu
|
|
obj-y += gpu/
|
|
|
|
obj-$(CONFIG_CONNECTOR) += connector/
|
|
|
|
# i810fb and intelfb depend on char/agp/
|
|
obj-$(CONFIG_FB_I810) += video/fbdev/i810/
|
|
obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
|
|
|
|
obj-$(CONFIG_PARPORT) += parport/
|
|
obj-y += base/ block/ misc/ mfd/ nfc/
|
|
obj-$(CONFIG_LIBNVDIMM) += nvdimm/
|
|
obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
|
|
obj-$(CONFIG_NUBUS) += nubus/
|
|
obj-y += macintosh/
|
|
obj-$(CONFIG_IDE) += ide/
|
|
obj-$(CONFIG_SCSI) += scsi/
|
|
obj-$(CONFIG_ATA) += ata/
|
|
obj-$(CONFIG_TARGET_CORE) += target/
|
|
obj-$(CONFIG_MTD) += mtd/
|
|
obj-$(CONFIG_SPI) += spi/
|
|
obj-$(CONFIG_SPMI) += spmi/
|
|
obj-y += hsi/
|
|
obj-y += net/
|
|
obj-$(CONFIG_ATM) += atm/
|
|
obj-$(CONFIG_FUSION) += message/
|
|
obj-y += firewire/
|
|
obj-$(CONFIG_UIO) += uio/
|
|
obj-$(CONFIG_VFIO) += vfio/
|
|
obj-y += cdrom/
|
|
obj-y += auxdisplay/
|
|
obj-$(CONFIG_PCCARD) += pcmcia/
|
|
obj-$(CONFIG_DIO) += dio/
|
|
obj-$(CONFIG_SBUS) += sbus/
|
|
obj-$(CONFIG_ZORRO) += zorro/
|
|
obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
|
|
obj-$(CONFIG_PARIDE) += block/paride/
|
|
obj-$(CONFIG_TC) += tc/
|
|
obj-$(CONFIG_UWB) += uwb/
|
|
obj-$(CONFIG_USB_PHY) += usb/
|
|
obj-$(CONFIG_USB) += usb/
|
|
obj-$(CONFIG_PCI) += usb/
|
|
obj-$(CONFIG_USB_GADGET) += usb/
|
|
obj-$(CONFIG_SERIO) += input/serio/
|
|
obj-$(CONFIG_GAMEPORT) += input/gameport/
|
|
obj-$(CONFIG_INPUT) += input/
|
|
obj-$(CONFIG_RTC_LIB) += rtc/
|
|
obj-y += i2c/ media/
|
|
obj-$(CONFIG_PPS) += pps/
|
|
obj-$(CONFIG_PTP_1588_CLOCK) += ptp/
|
|
obj-$(CONFIG_W1) += w1/
|
|
obj-$(CONFIG_POWER_SUPPLY) += power/
|
|
obj-$(CONFIG_HWMON) += hwmon/
|
|
obj-$(CONFIG_THERMAL) += thermal/
|
|
obj-$(CONFIG_WATCHDOG) += watchdog/
|
|
obj-$(CONFIG_MD) += md/
|
|
obj-$(CONFIG_BT) += bluetooth/
|
|
obj-$(CONFIG_ACCESSIBILITY) += accessibility/
|
|
obj-$(CONFIG_ISDN) += isdn/
|
|
obj-$(CONFIG_EDAC) += edac/
|
|
obj-$(CONFIG_EISA) += eisa/
|
|
obj-y += lguest/
|
|
obj-$(CONFIG_CPU_FREQ) += cpufreq/
|
|
obj-$(CONFIG_CPU_IDLE) += cpuidle/
|
|
obj-y += mmc/
|
|
obj-$(CONFIG_MEMSTICK) += memstick/
|
|
obj-y += leds/
|
|
obj-$(CONFIG_INFINIBAND) += infiniband/
|
|
obj-$(CONFIG_SGI_SN) += sn/
|
|
obj-y += firmware/
|
|
obj-$(CONFIG_CRYPTO) += crypto/
|
|
obj-$(CONFIG_SUPERH) += sh/
|
|
obj-$(CONFIG_ARCH_SHMOBILE) += sh/
|
|
ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
|
|
obj-y += clocksource/
|
|
endif
|
|
obj-$(CONFIG_DCA) += dca/
|
|
obj-$(CONFIG_HID) += hid/
|
|
obj-$(CONFIG_PPC_PS3) += ps3/
|
|
obj-$(CONFIG_OF) += of/
|
|
obj-$(CONFIG_SSB) += ssb/
|
|
obj-$(CONFIG_BCMA) += bcma/
|
|
obj-$(CONFIG_VHOST_RING) += vhost/
|
|
obj-$(CONFIG_VLYNQ) += vlynq/
|
|
obj-$(CONFIG_STAGING) += staging/
|
|
obj-y += platform/
|
|
#common clk code
|
|
obj-y += clk/
|
|
|
|
obj-$(CONFIG_MAILBOX) += mailbox/
|
|
obj-$(CONFIG_HWSPINLOCK) += hwspinlock/
|
|
obj-$(CONFIG_REMOTEPROC) += remoteproc/
|
|
obj-$(CONFIG_RPMSG) += rpmsg/
|
|
|
|
# Virtualization drivers
|
|
obj-$(CONFIG_VIRT_DRIVERS) += virt/
|
|
obj-$(CONFIG_HYPERV) += hv/
|
|
|
|
obj-$(CONFIG_PM_DEVFREQ) += devfreq/
|
|
obj-$(CONFIG_EXTCON) += extcon/
|
|
obj-$(CONFIG_MEMORY) += memory/
|
|
obj-$(CONFIG_IIO) += iio/
|
|
obj-$(CONFIG_VME_BUS) += vme/
|
|
obj-$(CONFIG_IPACK_BUS) += ipack/
|
|
obj-$(CONFIG_NTB) += ntb/
|
|
obj-$(CONFIG_FMC) += fmc/
|
|
obj-$(CONFIG_POWERCAP) += powercap/
|
|
obj-$(CONFIG_MCB) += mcb/
|
|
obj-$(CONFIG_PERF_EVENTS) += perf/
|
|
obj-$(CONFIG_RAS) += ras/
|
|
obj-$(CONFIG_THUNDERBOLT) += thunderbolt/
|
|
obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
|
|
obj-y += hwtracing/intel_th/
|
|
obj-$(CONFIG_STM) += hwtracing/stm/
|
|
obj-$(CONFIG_ANDROID) += android/
|
|
obj-$(CONFIG_NVMEM) += nvmem/
|