forked from Minki/linux
2e341ca686
This is the first big chunk for 3.5 merges of sound stuff.
There are a few big changes in different areas. First off, the
streaming logic of USB-audio endpoints has been largely rewritten
for the better support of "implicit feedback". If anything about USB
got broken, this change has to be checked.
For HD-audio, the resume procedure was changed; instead of delaying
the resume of the hardware until the first use, now waking up immediately
at resume. This is for buggy BIOS.
For ASoC, dynamic PCM support and the improved support for digital links
between off-SoC devices are major framework changes.
Some highlights are below:
* HD-audio
- Avoid the accesses of invalid pin-control bits that may stall the codec
- V-ref setup cleanups
- Fix the races in power-saving code
- Fix the races in codec cache hashes and connection lists
- Split some common codes for BIOS auto-parser to hda_auto_parser.c
- Changed the PM resume code to wake up immediately for buggy BIOS
- Creative SoundCore3D support
- Add Conexant CX20751/2/3/4 codec support
* ASoC
- Dynamic PCM support, allowing support for SoCs with internal routing
through components with tight sequencing and formatting constraints
within their internal paths or where there are multiple components
connected with CPU managed DMA controllers inside the SoC.
- Greatly improved support for direct digital links between off-SoC
devices, providing a much simpler way of connecting things like digital
basebands to CODECs.
- Much more fine grained and robust locking, cleaning up some of the
confusion that crept in with multi-component.
- CPU support for nVidia Tegra 30 I2S and audio hub controllers and
ST-Ericsson MSP I2S controolers
- New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas
Instruments LM49453.
- Some regmap changes needed by the Tegra I2S driver.
- mc13783 audio support.
* Misc
- Rewrite with module_pci_driver()
- Xonar DGX support for snd-oxygen
- Improvement of packet handling in snd-firewire driver
- New USB-endpoint streaming logic
- Enhanced M-audio FTU quirks and relevant cleanups
- Increment the support of OSS devices to 256
- snd-aloop accuracy improvement
There are a few more pending changes for 3.5, but they will be
sent slightly later as partly depending on the changes of DRM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=+JSm
-----END PGP SIGNATURE-----
Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This is the first big chunk for 3.5 merges of sound stuff.
There are a few big changes in different areas. First off, the
streaming logic of USB-audio endpoints has been largely rewritten for
the better support of "implicit feedback". If anything about USB got
broken, this change has to be checked.
For HD-audio, the resume procedure was changed; instead of delaying
the resume of the hardware until the first use, now waking up
immediately at resume. This is for buggy BIOS.
For ASoC, dynamic PCM support and the improved support for digital
links between off-SoC devices are major framework changes.
Some highlights are below:
* HD-audio
- Avoid accesses of invalid pin-control bits that may stall the codec
- V-ref setup cleanups
- Fix the races in power-saving code
- Fix the races in codec cache hashes and connection lists
- Split some common codes for BIOS auto-parser to hda_auto_parser.c
- Changed the PM resume code to wake up immediately for buggy BIOS
- Creative SoundCore3D support
- Add Conexant CX20751/2/3/4 codec support
* ASoC
- Dynamic PCM support, allowing support for SoCs with internal
routing through components with tight sequencing and formatting
constraints within their internal paths or where there are multiple
components connected with CPU managed DMA controllers inside the
SoC.
- Greatly improved support for direct digital links between off-SoC
devices, providing a much simpler way of connecting things like
digital basebands to CODECs.
- Much more fine grained and robust locking, cleaning up some of the
confusion that crept in with multi-component.
- CPU support for nVidia Tegra 30 I2S and audio hub controllers and
ST-Ericsson MSP I2S controolers
- New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
Texas Instruments LM49453.
- Some regmap changes needed by the Tegra I2S driver.
- mc13783 audio support.
* Misc
- Rewrite with module_pci_driver()
- Xonar DGX support for snd-oxygen
- Improvement of packet handling in snd-firewire driver
- New USB-endpoint streaming logic
- Enhanced M-audio FTU quirks and relevant cleanups
- Increment the support of OSS devices to 256
- snd-aloop accuracy improvement
There are a few more pending changes for 3.5, but they will be sent
slightly later as partly depending on the changes of DRM."
Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree). Also some
fairly trivial context conflicts in the imx and mcx soc drivers.
* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
ALSA: snd-usb: fix stream info output in /proc
ALSA: pcm - Add proper state checks to snd_pcm_drain()
ALSA: sh: Fix up namespace collision in sh_dac_audio.
ALSA: hda/realtek - Fix unused variable compile warning
ASoC: sh: fsi: enable chip specific data transfer mode
ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
ASoC: sh: fsi: use same format for IN/OUT
ASoC: sh: fsi: add fsi_version() and removed meaningless version check
ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
ASoC: tegra: Add machine driver for WM8753 codec
ALSA: hda - Fix possible races of accesses to connection list array
ASoC: OMAP: HDMI: Introduce codec
ARM: mx31_3ds: Add sound support
ASoC: imx-mc13783 cleanup
mx31moboard: Add sound support
ASoC: mc13783 codec cleanups
ASoC: add imx-mc13783 sound support
ASoC: Add mc13783 codec
mfd: mc13xxx: add codec platform data
ASoC: don't flip master of DT-instantiated DAI links
...
197 lines
4.2 KiB
Plaintext
197 lines
4.2 KiB
Plaintext
if ARCH_SHMOBILE
|
|
|
|
comment "SH-Mobile System Type"
|
|
|
|
config ARCH_SH7367
|
|
bool "SH-Mobile G3 (SH7367)"
|
|
select CPU_V6
|
|
select SH_CLK_CPG
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
|
|
config ARCH_SH7377
|
|
bool "SH-Mobile G4 (SH7377)"
|
|
select CPU_V7
|
|
select SH_CLK_CPG
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
|
|
config ARCH_SH7372
|
|
bool "SH-Mobile AP4 (SH7372)"
|
|
select CPU_V7
|
|
select SH_CLK_CPG
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
|
|
config ARCH_SH73A0
|
|
bool "SH-Mobile AG5 (R8A73A00)"
|
|
select CPU_V7
|
|
select SH_CLK_CPG
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
select ARM_GIC
|
|
select I2C
|
|
|
|
config ARCH_R8A7740
|
|
bool "R-Mobile A1 (R8A77400)"
|
|
select CPU_V7
|
|
select SH_CLK_CPG
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
|
|
config ARCH_R8A7779
|
|
bool "R-Car H1 (R8A77790)"
|
|
select CPU_V7
|
|
select SH_CLK_CPG
|
|
select ARM_GIC
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
|
|
config ARCH_EMEV2
|
|
bool "Emma Mobile EV2"
|
|
select CPU_V7
|
|
select ARM_GIC
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
|
|
|
comment "SH-Mobile Board Type"
|
|
|
|
config MACH_G3EVM
|
|
bool "G3EVM board"
|
|
depends on ARCH_SH7367
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
|
|
config MACH_G4EVM
|
|
bool "G4EVM board"
|
|
depends on ARCH_SH7377
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
|
|
config MACH_AP4EVB
|
|
bool "AP4EVB board"
|
|
depends on ARCH_SH7372
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select SH_LCD_MIPI_DSI
|
|
select SND_SOC_AK4642 if SND_SIMPLE_CARD
|
|
|
|
choice
|
|
prompt "AP4EVB LCD panel selection"
|
|
default AP4EVB_QHD
|
|
depends on MACH_AP4EVB
|
|
|
|
config AP4EVB_QHD
|
|
bool "MIPI-DSI QHD (960x540)"
|
|
|
|
config AP4EVB_WVGA
|
|
bool "Parallel WVGA (800x480)"
|
|
|
|
endchoice
|
|
|
|
config MACH_AG5EVM
|
|
bool "AG5EVM board"
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select SH_LCD_MIPI_DSI
|
|
depends on ARCH_SH73A0
|
|
|
|
config MACH_MACKEREL
|
|
bool "mackerel board"
|
|
depends on ARCH_SH7372
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select SND_SOC_AK4642 if SND_SIMPLE_CARD
|
|
|
|
config MACH_KOTA2
|
|
bool "KOTA2 board"
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
depends on ARCH_SH73A0
|
|
|
|
config MACH_BONITO
|
|
bool "bonito board"
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
depends on ARCH_R8A7740
|
|
|
|
config MACH_ARMADILLO800EVA
|
|
bool "Armadillo-800 EVA board"
|
|
depends on ARCH_R8A7740
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select USE_OF
|
|
|
|
config MACH_MARZEN
|
|
bool "MARZEN board"
|
|
depends on ARCH_R8A7779
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
|
|
config MACH_KZM9D
|
|
bool "KZM9D board"
|
|
depends on ARCH_EMEV2
|
|
select USE_OF
|
|
|
|
config MACH_KZM9G
|
|
bool "KZM-A9-GT board"
|
|
depends on ARCH_SH73A0
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select USE_OF
|
|
|
|
comment "SH-Mobile System Configuration"
|
|
|
|
config CPU_HAS_INTEVT
|
|
bool
|
|
default y
|
|
|
|
menu "Memory configuration"
|
|
|
|
config MEMORY_START
|
|
hex "Physical memory start address"
|
|
default "0x50000000" if MACH_G3EVM
|
|
default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
|
|
MACH_MACKEREL || MACH_BONITO || \
|
|
MACH_ARMADILLO800EVA
|
|
default "0x41000000" if MACH_KOTA2
|
|
default "0x00000000"
|
|
---help---
|
|
Tweak this only when porting to a new machine which does not
|
|
already have a defconfig. Changing it from the known correct
|
|
value on any of the known systems will only lead to disaster.
|
|
|
|
config MEMORY_SIZE
|
|
hex "Physical memory size"
|
|
default "0x08000000" if MACH_G3EVM
|
|
default "0x08000000" if MACH_G4EVM
|
|
default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
|
|
MACH_ARMADILLO800EVA
|
|
default "0x1e000000" if MACH_KOTA2
|
|
default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
|
|
default "0x04000000"
|
|
help
|
|
This sets the default memory size assumed by your kernel. It can
|
|
be overridden as normal by the 'mem=' argument on the kernel command
|
|
line.
|
|
|
|
endmenu
|
|
|
|
menu "Timer and clock configuration"
|
|
|
|
config SHMOBILE_TIMER_HZ
|
|
int "Kernel HZ (jiffies per second)"
|
|
range 32 1024
|
|
default "128"
|
|
help
|
|
Allows the configuration of the timer frequency. It is customary
|
|
to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
|
|
case of low timer frequencies other values may be more suitable.
|
|
SH-Mobile systems using a 32768 Hz RCLK for clock events may want
|
|
to select a HZ value such as 128 that can evenly divide RCLK.
|
|
A HZ value that does not divide evenly may cause timer drift.
|
|
|
|
config SH_TIMER_CMT
|
|
bool "CMT timer driver"
|
|
default y
|
|
help
|
|
This enables build of the CMT timer driver.
|
|
|
|
config SH_TIMER_TMU
|
|
bool "TMU timer driver"
|
|
default y
|
|
help
|
|
This enables build of the TMU timer driver.
|
|
|
|
endmenu
|
|
|
|
config SH_CLK_CPG
|
|
bool
|
|
|
|
source "drivers/sh/Kconfig"
|
|
|
|
endif
|