linux/drivers/pcmcia/sa1100_simpad.c
Russell King b1d8a5f917 PCMCIA: sa11x0: simpad: convert to use new irq/gpio management
Convert Simpad socket driver to use the new irq/gpio management.
This is slightly more involved because we have to touch the private
platform header file to modify the GPIO bitmasks to be GPIO numbers.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21 14:27:03 +00:00

122 lines
2.6 KiB
C

/*
* drivers/pcmcia/sa1100_simpad.c
*
* PCMCIA implementation routines for simpad
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <mach/simpad.h>
#include "sa1100_generic.h"
static int simpad_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
skt->stat[SOC_STAT_CD].gpio = GPIO_CF_CD;
skt->stat[SOC_STAT_CD].name = "CF_CD";
skt->stat[SOC_STAT_RDY].gpio = GPIO_CF_IRQ;
skt->stat[SOC_STAT_RDY].name = "CF_RDY";
return 0;
}
static void simpad_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
/* Disable CF bus: */
/*simpad_set_cs3_bit(PCMCIA_BUFF_DIS);*/
simpad_clear_cs3_bit(PCMCIA_RESET);
}
static void
simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
long cs3reg = simpad_get_cs3_ro();
/* the detect signal is inverted - fix that up here */
state->detect = !state->detect;
state->bvd1 = 1; /* Might be cs3reg & PCMCIA_BVD1 */
state->bvd2 = 1; /* Might be cs3reg & PCMCIA_BVD2 */
state->wrprot=0; /* Not available on Simpad. */
if ((cs3reg & (PCMCIA_VS1|PCMCIA_VS2)) ==
(PCMCIA_VS1|PCMCIA_VS2)) {
state->vs_3v=0;
state->vs_Xv=0;
} else {
state->vs_3v=1;
state->vs_Xv=0;
}
}
static int
simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
unsigned long flags;
local_irq_save(flags);
/* Murphy: see table of MIC2562a-1 */
switch (state->Vcc) {
case 0:
simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
break;
case 33:
simpad_clear_cs3_bit(VCC_3V_EN|EN1);
simpad_set_cs3_bit(VCC_5V_EN|EN0);
break;
case 50:
simpad_clear_cs3_bit(VCC_5V_EN|EN1);
simpad_set_cs3_bit(VCC_3V_EN|EN0);
break;
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
__func__, state->Vcc);
simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
local_irq_restore(flags);
return -1;
}
local_irq_restore(flags);
return 0;
}
static void simpad_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
simpad_set_cs3_bit(PCMCIA_RESET);
}
static struct pcmcia_low_level simpad_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = simpad_pcmcia_hw_init,
.hw_shutdown = simpad_pcmcia_hw_shutdown,
.socket_state = simpad_pcmcia_socket_state,
.configure_socket = simpad_pcmcia_configure_socket,
.socket_suspend = simpad_pcmcia_socket_suspend,
};
int __devinit pcmcia_simpad_init(struct device *dev)
{
int ret = -ENODEV;
if (machine_is_simpad())
ret = sa11xx_drv_pcmcia_probe(dev, &simpad_pcmcia_ops, 1, 1);
return ret;
}