forked from Minki/linux
59ab5bff23
Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. In addition, this will allow the PM domain code to find the PM domain for the console device. Note that we have to keep the "console=ttySC4" parameter in chosen/bootargs, else we only get console messages on tty0. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
359 lines
7.0 KiB
Plaintext
359 lines
7.0 KiB
Plaintext
/*
|
|
* Device Tree Source for the KZM-A9-GT board
|
|
*
|
|
* Copyright (C) 2012 Horms Solutions Ltd.
|
|
*
|
|
* Based on sh73a0-kzm9g.dts
|
|
* Copyright (C) 2012 Renesas Solutions Corp.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "sh73a0.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "KZM-A9-GT";
|
|
compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
|
|
|
|
aliases {
|
|
serial4 = &scifa4;
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vdd_dvfs>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
1196000 1315000
|
|
598000 1175000
|
|
398667 1065000
|
|
>;
|
|
voltage-tolerance = <1>; /* 1% */
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
|
|
stdout-path = &scifa4;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x41000000 0x1e800000>;
|
|
};
|
|
|
|
reg_1p8v: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reg_3p3v: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vmmc_sdhi0: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "SDHI0 Vcc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vmmc_sdhi2: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "SDHI2 Vcc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
lan9220@10000000 {
|
|
compatible = "smsc,lan9220", "smsc,lan9115";
|
|
reg = <0x10000000 0x100>;
|
|
phy-mode = "mii";
|
|
interrupt-parent = <&irqpin0>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
|
reg-io-width = <4>;
|
|
smsc,irq-push-pull;
|
|
smsc,save-mac-address;
|
|
vddvario-supply = <®_1p8v>;
|
|
vdd33a-supply = <®_3p3v>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
led1 {
|
|
gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
|
|
};
|
|
led2 {
|
|
gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
|
|
};
|
|
led3 {
|
|
gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
|
|
};
|
|
led4 {
|
|
gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
back-key {
|
|
gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_BACK>;
|
|
label = "SW3";
|
|
};
|
|
|
|
right-key {
|
|
gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RIGHT>;
|
|
label = "SW2-R";
|
|
};
|
|
|
|
left-key {
|
|
gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_LEFT>;
|
|
label = "SW2-L";
|
|
};
|
|
|
|
enter-key {
|
|
gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_ENTER>;
|
|
label = "SW2-P";
|
|
};
|
|
|
|
up-key {
|
|
gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_UP>;
|
|
label = "SW2-U";
|
|
};
|
|
|
|
down-key {
|
|
gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_DOWN>;
|
|
label = "SW2-D";
|
|
};
|
|
|
|
home-key {
|
|
gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_HOME>;
|
|
label = "SW1";
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "left_j";
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&sh_fsi2 0>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&ak4648>;
|
|
bitclock-master;
|
|
frame-master;
|
|
system-clock-frequency = <11289600>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cmt1 {
|
|
status = "ok";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
as3711@40 {
|
|
compatible = "ams,as3711";
|
|
reg = <0x40>;
|
|
|
|
regulators {
|
|
vdd_dvfs: sd1 {
|
|
regulator-name = "1.315V CPU";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
sd2 {
|
|
regulator-name = "1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
sd4 {
|
|
regulator-name = "1.215V";
|
|
regulator-min-microvolt = <1215000>;
|
|
regulator-max-microvolt = <1235000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo2 {
|
|
regulator-name = "2.8V CPU";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo3 {
|
|
regulator-name = "3.0V CPU";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo4 {
|
|
regulator-name = "2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo5 {
|
|
regulator-name = "2.8V #2";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo7 {
|
|
regulator-name = "1.15V CPU";
|
|
regulator-min-microvolt = <1150000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
ldo8 {
|
|
regulator-name = "1.15V CPU #2";
|
|
regulator-min-microvolt = <1150000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
ak4648: ak4648@0x12 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "asahi-kasei,ak4648";
|
|
reg = <0x12>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
pcf8575: gpio@20 {
|
|
compatible = "nxp,pcf8575";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&irqpin2>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&mmcif {
|
|
pinctrl-0 = <&mmcif_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
bus-width = <8>;
|
|
vmmc-supply = <®_1p8v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pfc {
|
|
i2c3_pins: i2c3 {
|
|
renesas,groups = "i2c3_1";
|
|
renesas,function = "i2c3";
|
|
};
|
|
|
|
mmcif_pins: mmc {
|
|
mux {
|
|
renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
|
|
renesas,function = "mmc0";
|
|
};
|
|
cfg {
|
|
renesas,groups = "mmc0_data8_0";
|
|
renesas,pins = "PORT279";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
scifa4_pins: serial4 {
|
|
renesas,groups = "scifa4_data", "scifa4_ctrl";
|
|
renesas,function = "scifa4";
|
|
};
|
|
|
|
sdhi0_pins: sd0 {
|
|
renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
|
|
renesas,function = "sdhi0";
|
|
};
|
|
|
|
sdhi2_pins: sd2 {
|
|
renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
|
|
renesas,function = "sdhi2";
|
|
};
|
|
|
|
fsia_pins: sounda {
|
|
renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
|
|
"fsia_data_in", "fsia_data_out";
|
|
renesas,function = "fsia";
|
|
};
|
|
};
|
|
|
|
&scifa4 {
|
|
pinctrl-0 = <&scifa4_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhi0 {
|
|
pinctrl-0 = <&sdhi0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
vmmc-supply = <&vmmc_sdhi0>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhi2 {
|
|
pinctrl-0 = <&sdhi2_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
vmmc-supply = <&vmmc_sdhi2>;
|
|
bus-width = <4>;
|
|
broken-cd;
|
|
status = "okay";
|
|
};
|
|
|
|
&sh_fsi2 {
|
|
pinctrl-0 = <&fsia_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|