forked from Minki/linux
8931084c0d
- Let the dma map ops deal with bouncing and drop dma_max_pfn() from the dma-mapping interface for ARM - Convert the generic MMC DT doc to YAML schemas - Drop questionable support for powered-on re-init of SDIO cards at runtime resume and for SDIO HW reset - Prevent questionable re-init of powered-on removable SDIO cards at system resume - Cleanup and clarify some SDIO core code MMC host: - tmio: Make runtime PM enablement more flexible for variants - tmio/renesas_sdhi: Rename DT doc tmio_mmc.txt to renesas,sdhi.txt to clarify - sdhci-pci: Add support for Intel EHL - sdhci-pci-o2micro: Enable support for 8-bit bus - sdhci-msm: Prevent acquiring a mutex while holding a spin_lock - sdhci-of-esdhc: Improve clock management and tuning - sdhci_am654: Enable support for 4 and 8-bit bus on J721E - sdhci-sprd: Use pinctrl for a proper signal voltage switch - sdhci-sprd: Add support for HS400 enhanced strobe mode - sdhci-sprd: Enable PHY DLL and allow delay config to stabilize the clock - sdhci-sprd: Add support for optional gate clock - sunxi-mmc: Convert DT doc to YAML schemas - meson-gx: Add support for broken DRAM access for DMA MEMSTICK core: - Fixup error path of memstick_init() -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAl0l7iYXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnZnRAA0nBPUsFMl559lySNwO+WjBVo z58dw+J3jDTZ5gFGAUOrnYkZfGEweRwzWnfED6Dyh+e+SJiRnSZH8XRTJEAUeTgi 9KWVr+VGpjZyctNJaMKTeJbPiu/50UVRLJeOGcdJWdMMC9ZlJjKKC2xgyVsInq7P wKE8T3k5afNxABgrKtOTKKONCPRNMVyHdMXzUNFLhlj/du9rR5K7f429RhpPU6GU 7jQ7z9147mwRYm5frn1nx3IvrJUaGyiiSs1ln1PnOV9LsUfVP5NluvbYA6nS4e3V jU64Rvf+9RIHTt2z+ZWTjqrNb/2Ug4faPHc7D4Yl4PEsesR51+tWbpLWUX7Mmm6d 2gbWFv3kzYvSU2G4ztMTrLcsQmd64W1GocXFPvh/UdfQf1200abenj17Gdl0h3Ze +NouYXwMw+n1wHNciotpaR8OMHGV6zo0dvDczpc3r73wzxoeNGdiuVlppFcIGvdA 950oPiqNrFtz2S1DZ9HLeISMajRts7B1nvsr9a/XXa8Us1M6whQDJbMDTynR4Fky j8Sw+9nCk0gupuNcfOrHN9TfOf6Tc5BtIvGqhVF6wmDRtRubfc9HReRheioU67EO PsWe+xpS/8pg/lJNzBm6i0isCmce+rNbZTtpil33yS4Tv85KhGw1XOZ6HLoPrOmN HYPJtDUvOMKlH6M1rJM= =vkWp -----END PGP SIGNATURE----- Merge tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Let the dma map ops deal with bouncing and drop dma_max_pfn() from the dma-mapping interface for ARM - Convert the generic MMC DT doc to YAML schemas - Drop questionable support for powered-on re-init of SDIO cards at runtime resume and for SDIO HW reset - Prevent questionable re-init of powered-on removable SDIO cards at system resume - Cleanup and clarify some SDIO core code MMC host: - tmio: Make runtime PM enablement more flexible for variants - tmio/renesas_sdhi: Rename DT doc tmio_mmc.txt to renesas,sdhi.txt to clarify - sdhci-pci: Add support for Intel EHL - sdhci-pci-o2micro: Enable support for 8-bit bus - sdhci-msm: Prevent acquiring a mutex while holding a spin_lock - sdhci-of-esdhc: Improve clock management and tuning - sdhci_am654: Enable support for 4 and 8-bit bus on J721E - sdhci-sprd: Use pinctrl for a proper signal voltage switch - sdhci-sprd: Add support for HS400 enhanced strobe mode - sdhci-sprd: Enable PHY DLL and allow delay config to stabilize the clock - sdhci-sprd: Add support for optional gate clock - sunxi-mmc: Convert DT doc to YAML schemas - meson-gx: Add support for broken DRAM access for DMA MEMSTICK core: - Fixup error path of memstick_init()" * tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654 mmc: alcor: remove a redundant greater or equal to zero comparison mmc: sdhci-msm: fix mutex while in spinlock mmc: sdhci_am654: Make some symbols static dma-mapping: remove dma_max_pfn mmc: core: let the dma map ops handle bouncing dt-binding: mmc: rename tmio_mmc.txt to renesas,sdhi.txt mmc: sdhci-sprd: Add pin control support for voltage switch dt-bindings: mmc: sprd: Add pinctrl support mmc: sdhci-sprd: Add start_signal_voltage_switch ops mmc: sdhci-pci: Add support for Intel EHL mmc: tmio: Use dma_max_mapping_size() instead of a workaround mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card() mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card() mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume mmc: sdio: Drop powered-on re-init at runtime resume and HW reset mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card() mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore() mmc: sdio: Turn sdio_run_irqs() into static mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUS ...
271 lines
5.8 KiB
C
271 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Debugfs support for hosts and cards
|
|
*
|
|
* Copyright (C) 2008 Atmel Corporation
|
|
*/
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/export.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/fault-inject.h>
|
|
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include "core.h"
|
|
#include "card.h"
|
|
#include "host.h"
|
|
#include "mmc_ops.h"
|
|
|
|
#ifdef CONFIG_FAIL_MMC_REQUEST
|
|
|
|
static DECLARE_FAULT_ATTR(fail_default_attr);
|
|
static char *fail_request;
|
|
module_param(fail_request, charp, 0);
|
|
|
|
#endif /* CONFIG_FAIL_MMC_REQUEST */
|
|
|
|
/* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */
|
|
static int mmc_ios_show(struct seq_file *s, void *data)
|
|
{
|
|
static const char *vdd_str[] = {
|
|
[8] = "2.0",
|
|
[9] = "2.1",
|
|
[10] = "2.2",
|
|
[11] = "2.3",
|
|
[12] = "2.4",
|
|
[13] = "2.5",
|
|
[14] = "2.6",
|
|
[15] = "2.7",
|
|
[16] = "2.8",
|
|
[17] = "2.9",
|
|
[18] = "3.0",
|
|
[19] = "3.1",
|
|
[20] = "3.2",
|
|
[21] = "3.3",
|
|
[22] = "3.4",
|
|
[23] = "3.5",
|
|
[24] = "3.6",
|
|
};
|
|
struct mmc_host *host = s->private;
|
|
struct mmc_ios *ios = &host->ios;
|
|
const char *str;
|
|
|
|
seq_printf(s, "clock:\t\t%u Hz\n", ios->clock);
|
|
if (host->actual_clock)
|
|
seq_printf(s, "actual clock:\t%u Hz\n", host->actual_clock);
|
|
seq_printf(s, "vdd:\t\t%u ", ios->vdd);
|
|
if ((1 << ios->vdd) & MMC_VDD_165_195)
|
|
seq_printf(s, "(1.65 - 1.95 V)\n");
|
|
else if (ios->vdd < (ARRAY_SIZE(vdd_str) - 1)
|
|
&& vdd_str[ios->vdd] && vdd_str[ios->vdd + 1])
|
|
seq_printf(s, "(%s ~ %s V)\n", vdd_str[ios->vdd],
|
|
vdd_str[ios->vdd + 1]);
|
|
else
|
|
seq_printf(s, "(invalid)\n");
|
|
|
|
switch (ios->bus_mode) {
|
|
case MMC_BUSMODE_OPENDRAIN:
|
|
str = "open drain";
|
|
break;
|
|
case MMC_BUSMODE_PUSHPULL:
|
|
str = "push-pull";
|
|
break;
|
|
default:
|
|
str = "invalid";
|
|
break;
|
|
}
|
|
seq_printf(s, "bus mode:\t%u (%s)\n", ios->bus_mode, str);
|
|
|
|
switch (ios->chip_select) {
|
|
case MMC_CS_DONTCARE:
|
|
str = "don't care";
|
|
break;
|
|
case MMC_CS_HIGH:
|
|
str = "active high";
|
|
break;
|
|
case MMC_CS_LOW:
|
|
str = "active low";
|
|
break;
|
|
default:
|
|
str = "invalid";
|
|
break;
|
|
}
|
|
seq_printf(s, "chip select:\t%u (%s)\n", ios->chip_select, str);
|
|
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_OFF:
|
|
str = "off";
|
|
break;
|
|
case MMC_POWER_UP:
|
|
str = "up";
|
|
break;
|
|
case MMC_POWER_ON:
|
|
str = "on";
|
|
break;
|
|
default:
|
|
str = "invalid";
|
|
break;
|
|
}
|
|
seq_printf(s, "power mode:\t%u (%s)\n", ios->power_mode, str);
|
|
seq_printf(s, "bus width:\t%u (%u bits)\n",
|
|
ios->bus_width, 1 << ios->bus_width);
|
|
|
|
switch (ios->timing) {
|
|
case MMC_TIMING_LEGACY:
|
|
str = "legacy";
|
|
break;
|
|
case MMC_TIMING_MMC_HS:
|
|
str = "mmc high-speed";
|
|
break;
|
|
case MMC_TIMING_SD_HS:
|
|
str = "sd high-speed";
|
|
break;
|
|
case MMC_TIMING_UHS_SDR12:
|
|
str = "sd uhs SDR12";
|
|
break;
|
|
case MMC_TIMING_UHS_SDR25:
|
|
str = "sd uhs SDR25";
|
|
break;
|
|
case MMC_TIMING_UHS_SDR50:
|
|
str = "sd uhs SDR50";
|
|
break;
|
|
case MMC_TIMING_UHS_SDR104:
|
|
str = "sd uhs SDR104";
|
|
break;
|
|
case MMC_TIMING_UHS_DDR50:
|
|
str = "sd uhs DDR50";
|
|
break;
|
|
case MMC_TIMING_MMC_DDR52:
|
|
str = "mmc DDR52";
|
|
break;
|
|
case MMC_TIMING_MMC_HS200:
|
|
str = "mmc HS200";
|
|
break;
|
|
case MMC_TIMING_MMC_HS400:
|
|
str = mmc_card_hs400es(host->card) ?
|
|
"mmc HS400 enhanced strobe" : "mmc HS400";
|
|
break;
|
|
default:
|
|
str = "invalid";
|
|
break;
|
|
}
|
|
seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str);
|
|
|
|
switch (ios->signal_voltage) {
|
|
case MMC_SIGNAL_VOLTAGE_330:
|
|
str = "3.30 V";
|
|
break;
|
|
case MMC_SIGNAL_VOLTAGE_180:
|
|
str = "1.80 V";
|
|
break;
|
|
case MMC_SIGNAL_VOLTAGE_120:
|
|
str = "1.20 V";
|
|
break;
|
|
default:
|
|
str = "invalid";
|
|
break;
|
|
}
|
|
seq_printf(s, "signal voltage:\t%u (%s)\n", ios->signal_voltage, str);
|
|
|
|
switch (ios->drv_type) {
|
|
case MMC_SET_DRIVER_TYPE_A:
|
|
str = "driver type A";
|
|
break;
|
|
case MMC_SET_DRIVER_TYPE_B:
|
|
str = "driver type B";
|
|
break;
|
|
case MMC_SET_DRIVER_TYPE_C:
|
|
str = "driver type C";
|
|
break;
|
|
case MMC_SET_DRIVER_TYPE_D:
|
|
str = "driver type D";
|
|
break;
|
|
default:
|
|
str = "invalid";
|
|
break;
|
|
}
|
|
seq_printf(s, "driver type:\t%u (%s)\n", ios->drv_type, str);
|
|
|
|
return 0;
|
|
}
|
|
DEFINE_SHOW_ATTRIBUTE(mmc_ios);
|
|
|
|
static int mmc_clock_opt_get(void *data, u64 *val)
|
|
{
|
|
struct mmc_host *host = data;
|
|
|
|
*val = host->ios.clock;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_clock_opt_set(void *data, u64 val)
|
|
{
|
|
struct mmc_host *host = data;
|
|
|
|
/* We need this check due to input value is u64 */
|
|
if (val != 0 && (val > host->f_max || val < host->f_min))
|
|
return -EINVAL;
|
|
|
|
mmc_claim_host(host);
|
|
mmc_set_clock(host, (unsigned int) val);
|
|
mmc_release_host(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SIMPLE_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set,
|
|
"%llu\n");
|
|
|
|
void mmc_add_host_debugfs(struct mmc_host *host)
|
|
{
|
|
struct dentry *root;
|
|
|
|
root = debugfs_create_dir(mmc_hostname(host), NULL);
|
|
host->debugfs_root = root;
|
|
|
|
debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops);
|
|
debugfs_create_x32("caps", S_IRUSR, root, &host->caps);
|
|
debugfs_create_x32("caps2", S_IRUSR, root, &host->caps2);
|
|
debugfs_create_file("clock", S_IRUSR | S_IWUSR, root, host,
|
|
&mmc_clock_fops);
|
|
|
|
#ifdef CONFIG_FAIL_MMC_REQUEST
|
|
if (fail_request)
|
|
setup_fault_attr(&fail_default_attr, fail_request);
|
|
host->fail_mmc_request = fail_default_attr;
|
|
fault_create_debugfs_attr("fail_mmc_request", root,
|
|
&host->fail_mmc_request);
|
|
#endif
|
|
}
|
|
|
|
void mmc_remove_host_debugfs(struct mmc_host *host)
|
|
{
|
|
debugfs_remove_recursive(host->debugfs_root);
|
|
}
|
|
|
|
void mmc_add_card_debugfs(struct mmc_card *card)
|
|
{
|
|
struct mmc_host *host = card->host;
|
|
struct dentry *root;
|
|
|
|
if (!host->debugfs_root)
|
|
return;
|
|
|
|
root = debugfs_create_dir(mmc_card_id(card), host->debugfs_root);
|
|
card->debugfs_root = root;
|
|
|
|
debugfs_create_x32("state", S_IRUSR, root, &card->state);
|
|
}
|
|
|
|
void mmc_remove_card_debugfs(struct mmc_card *card)
|
|
{
|
|
debugfs_remove_recursive(card->debugfs_root);
|
|
card->debugfs_root = NULL;
|
|
}
|