forked from Minki/linux
4fd0a21353
The Lite5200 evaluation board has a number of debug LEDs that Linux doesn't know about yet. This change adds a gpio-leds stanza to the lite5200 device tree so that the correct driver can get hooked up. Also, make use of the dtc labels feature to reduce the number of source lines required to add the gpio-controller property to the general purpose timer nodes. In addition, the required #gpio-cells properties are added to the common mpc5200b dtsi include file so that each board doesn't need to add them explicitly. This still doesn't enable gpio mode, 'gpio-controller' is required for that, but it means less work needs to be done by board ports. Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
293 lines
7.4 KiB
Plaintext
293 lines
7.4 KiB
Plaintext
/*
|
|
* base MPC5200b Device Tree Source
|
|
*
|
|
* Copyright (C) 2010 SecretLab
|
|
* Grant Likely <grant@secretlab.ca>
|
|
* John Bonesio <bones@secretlab.ca>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "fsl,mpc5200b";
|
|
compatible = "fsl,mpc5200b";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
powerpc: PowerPC,5200@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-line-size = <32>;
|
|
d-cache-size = <0x4000>; // L1, 16K
|
|
i-cache-size = <0x4000>; // L1, 16K
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
memory: memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x04000000>; // 64MB
|
|
};
|
|
|
|
soc: soc5200@f0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc5200b-immr";
|
|
ranges = <0 0xf0000000 0x0000c000>;
|
|
reg = <0xf0000000 0x00000100>;
|
|
bus-frequency = <0>; // from bootloader
|
|
system-frequency = <0>; // from bootloader
|
|
|
|
cdm@200 {
|
|
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
|
|
reg = <0x200 0x38>;
|
|
};
|
|
|
|
mpc5200_pic: interrupt-controller@500 {
|
|
// 5200 interrupts are encoded into two levels;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
|
|
reg = <0x500 0x80>;
|
|
};
|
|
|
|
gpt0: timer@600 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
|
|
reg = <0x600 0x10>;
|
|
interrupts = <1 9 0>;
|
|
// add 'fsl,has-wdt' to enable watchdog
|
|
};
|
|
|
|
gpt1: timer@610 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
|
|
reg = <0x610 0x10>;
|
|
interrupts = <1 10 0>;
|
|
};
|
|
|
|
gpt2: timer@620 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
|
|
reg = <0x620 0x10>;
|
|
interrupts = <1 11 0>;
|
|
};
|
|
|
|
gpt3: timer@630 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
|
|
reg = <0x630 0x10>;
|
|
interrupts = <1 12 0>;
|
|
};
|
|
|
|
gpt4: timer@640 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
|
|
reg = <0x640 0x10>;
|
|
interrupts = <1 13 0>;
|
|
};
|
|
|
|
gpt5: timer@650 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
|
|
reg = <0x650 0x10>;
|
|
interrupts = <1 14 0>;
|
|
};
|
|
|
|
gpt6: timer@660 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
|
|
reg = <0x660 0x10>;
|
|
interrupts = <1 15 0>;
|
|
};
|
|
|
|
gpt7: timer@670 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
|
|
#gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
|
|
reg = <0x670 0x10>;
|
|
interrupts = <1 16 0>;
|
|
};
|
|
|
|
rtc@800 { // Real time clock
|
|
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
|
|
reg = <0x800 0x100>;
|
|
interrupts = <1 5 0 1 6 0>;
|
|
};
|
|
|
|
can@900 {
|
|
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
|
interrupts = <2 17 0>;
|
|
reg = <0x900 0x80>;
|
|
};
|
|
|
|
can@980 {
|
|
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
|
|
interrupts = <2 18 0>;
|
|
reg = <0x980 0x80>;
|
|
};
|
|
|
|
gpio_simple: gpio@b00 {
|
|
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
|
|
reg = <0xb00 0x40>;
|
|
interrupts = <1 7 0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpio_wkup: gpio@c00 {
|
|
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
|
|
reg = <0xc00 0x40>;
|
|
interrupts = <1 8 0 0 3 0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
spi@f00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
|
|
reg = <0xf00 0x20>;
|
|
interrupts = <2 13 0 2 14 0>;
|
|
};
|
|
|
|
usb: usb@1000 {
|
|
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
|
|
reg = <0x1000 0xff>;
|
|
interrupts = <2 6 0>;
|
|
};
|
|
|
|
dma-controller@1200 {
|
|
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
|
|
reg = <0x1200 0x80>;
|
|
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
|
3 4 0 3 5 0 3 6 0 3 7 0
|
|
3 8 0 3 9 0 3 10 0 3 11 0
|
|
3 12 0 3 13 0 3 14 0 3 15 0>;
|
|
};
|
|
|
|
xlb@1f00 {
|
|
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
|
|
reg = <0x1f00 0x100>;
|
|
};
|
|
|
|
psc1: psc@2000 { // PSC1
|
|
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
|
reg = <0x2000 0x100>;
|
|
interrupts = <2 1 0>;
|
|
};
|
|
|
|
psc2: psc@2200 { // PSC2
|
|
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
|
reg = <0x2200 0x100>;
|
|
interrupts = <2 2 0>;
|
|
};
|
|
|
|
psc3: psc@2400 { // PSC3
|
|
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
|
reg = <0x2400 0x100>;
|
|
interrupts = <2 3 0>;
|
|
};
|
|
|
|
psc4: psc@2600 { // PSC4
|
|
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
|
reg = <0x2600 0x100>;
|
|
interrupts = <2 11 0>;
|
|
};
|
|
|
|
psc5: psc@2800 { // PSC5
|
|
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
|
reg = <0x2800 0x100>;
|
|
interrupts = <2 12 0>;
|
|
};
|
|
|
|
psc6: psc@2c00 { // PSC6
|
|
compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
|
|
reg = <0x2c00 0x100>;
|
|
interrupts = <2 4 0>;
|
|
};
|
|
|
|
eth0: ethernet@3000 {
|
|
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
|
|
reg = <0x3000 0x400>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <2 5 0>;
|
|
};
|
|
|
|
mdio@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
|
|
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
|
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
|
};
|
|
|
|
ata@3a00 {
|
|
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
|
|
reg = <0x3a00 0x100>;
|
|
interrupts = <2 7 0>;
|
|
};
|
|
|
|
sclpc@3c00 {
|
|
compatible = "fsl,mpc5200-lpbfifo";
|
|
reg = <0x3c00 0x60>;
|
|
interrupts = <2 23 0>;
|
|
};
|
|
|
|
i2c@3d00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
|
reg = <0x3d00 0x40>;
|
|
interrupts = <2 15 0>;
|
|
};
|
|
|
|
i2c@3d40 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
|
|
reg = <0x3d40 0x40>;
|
|
interrupts = <2 16 0>;
|
|
};
|
|
|
|
sram@8000 {
|
|
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
|
|
reg = <0x8000 0x4000>;
|
|
};
|
|
};
|
|
|
|
pci: pci@f0000d00 {
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
|
|
reg = <0xf0000d00 0x100>;
|
|
// interrupt-map-mask = need to add
|
|
// interrupt-map = need to add
|
|
clock-frequency = <0>; // From boot loader
|
|
interrupts = <2 8 0 2 9 0 2 10 0>;
|
|
bus-range = <0 0>;
|
|
// ranges = need to add
|
|
};
|
|
|
|
localbus: localbus {
|
|
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0xfc000000 0x2000000>;
|
|
};
|
|
};
|