d5490f1f67
This allows configuring the RGMII TX clock delay. The RGMII clock is generated by underlying hardware of the the Meson 8b / GXBB DWMAC glue. The configuration depends on the actual hardware (no delay may be needed due to the design of the actual circuit, the PHY might add this delay, etc.). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
71 lines
2.3 KiB
Plaintext
71 lines
2.3 KiB
Plaintext
* Amlogic Meson DWMAC Ethernet controller
|
|
|
|
The device inherits all the properties of the dwmac/stmmac devices
|
|
described in the file stmmac.txt in the current directory with the
|
|
following changes.
|
|
|
|
Required properties on all platforms:
|
|
|
|
- compatible: Depending on the platform this should be one of:
|
|
- "amlogic,meson6-dwmac"
|
|
- "amlogic,meson8b-dwmac"
|
|
- "amlogic,meson-gxbb-dwmac"
|
|
Additionally "snps,dwmac" and any applicable more
|
|
detailed version number described in net/stmmac.txt
|
|
should be used.
|
|
|
|
- reg: The first register range should be the one of the DWMAC
|
|
controller. The second range is is for the Amlogic specific
|
|
configuration (for example the PRG_ETHERNET register range
|
|
on Meson8b and newer)
|
|
|
|
Required properties on Meson8b and newer:
|
|
- clock-names: Should contain the following:
|
|
- "stmmaceth" - see stmmac.txt
|
|
- "clkin0" - first parent clock of the internal mux
|
|
- "clkin1" - second parent clock of the internal mux
|
|
|
|
Optional properties on Meson8b and newer:
|
|
- amlogic,tx-delay-ns: The internal RGMII TX clock delay (provided
|
|
by this driver) in nanoseconds. Allowed values
|
|
are: 0ns, 2ns, 4ns, 6ns.
|
|
When phy-mode is set to "rgmii" then the TX
|
|
delay should be explicitly configured. When
|
|
not configured a fallback of 2ns is used.
|
|
When the phy-mode is set to either "rgmii-id"
|
|
or "rgmii-txid" the TX clock delay is already
|
|
provided by the PHY. In that case this
|
|
property should be set to 0ns (which disables
|
|
the TX clock delay in the MAC to prevent the
|
|
clock from going off because both PHY and MAC
|
|
are adding a delay).
|
|
Any configuration is ignored when the phy-mode
|
|
is set to "rmii".
|
|
|
|
Example for Meson6:
|
|
|
|
ethmac: ethernet@c9410000 {
|
|
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
|
|
reg = <0xc9410000 0x10000
|
|
0xc1108108 0x4>;
|
|
interrupts = <0 8 1>;
|
|
interrupt-names = "macirq";
|
|
clocks = <&clk81>;
|
|
clock-names = "stmmaceth";
|
|
}
|
|
|
|
Example for GXBB:
|
|
ethmac: ethernet@c9410000 {
|
|
compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
|
|
reg = <0x0 0xc9410000 0x0 0x10000>,
|
|
<0x0 0xc8834540 0x0 0x8>;
|
|
interrupts = <0 8 1>;
|
|
interrupt-names = "macirq";
|
|
clocks = <&clkc CLKID_ETH>,
|
|
<&clkc CLKID_FCLK_DIV2>,
|
|
<&clkc CLKID_MPLL2>;
|
|
clock-names = "stmmaceth", "clkin0", "clkin1";
|
|
phy-mode = "rgmii";
|
|
status = "disabled";
|
|
};
|