forked from Minki/linux
3e0a07f8c4
This commit fixes the regression on Armada 370 (the kernal hang during boot) introduced by the commit: "ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead". When coming out of either a Wait for Interrupt (WFI) or a Wait for Event (WFE) IDLE states, a specific timing sensitivity exists between the retiring WFI/WFE instructions and the newly issued subsequent instructions. This sensitivity can result in a CPU hang scenario. The workaround is to insert either a Data Synchronization Barrier (DSB) or Data Memory Barrier (DMB) command immediately after the WFI/WFE instruction. This commit was based on the work of Lior Amsalem, but heavily modified to apply the errata fix dynamically according to the processor type thanks to the suggestions of Russell King and Nicolas Pitre. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Willy Tarreau <w@1wt.eu> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
341 lines
7.9 KiB
ArmAsm
341 lines
7.9 KiB
ArmAsm
/*
|
|
* We need constants.h for:
|
|
* VMA_VM_MM
|
|
* VMA_VM_FLAGS
|
|
* VM_EXEC
|
|
*/
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/thread_info.h>
|
|
|
|
/*
|
|
* vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
|
|
*/
|
|
.macro vma_vm_mm, rd, rn
|
|
ldr \rd, [\rn, #VMA_VM_MM]
|
|
.endm
|
|
|
|
/*
|
|
* vma_vm_flags - get vma->vm_flags
|
|
*/
|
|
.macro vma_vm_flags, rd, rn
|
|
ldr \rd, [\rn, #VMA_VM_FLAGS]
|
|
.endm
|
|
|
|
.macro tsk_mm, rd, rn
|
|
ldr \rd, [\rn, #TI_TASK]
|
|
ldr \rd, [\rd, #TSK_ACTIVE_MM]
|
|
.endm
|
|
|
|
/*
|
|
* act_mm - get current->active_mm
|
|
*/
|
|
.macro act_mm, rd
|
|
bic \rd, sp, #8128
|
|
bic \rd, \rd, #63
|
|
ldr \rd, [\rd, #TI_TASK]
|
|
ldr \rd, [\rd, #TSK_ACTIVE_MM]
|
|
.endm
|
|
|
|
/*
|
|
* mmid - get context id from mm pointer (mm->context.id)
|
|
* note, this field is 64bit, so in big-endian the two words are swapped too.
|
|
*/
|
|
.macro mmid, rd, rn
|
|
#ifdef __ARMEB__
|
|
ldr \rd, [\rn, #MM_CONTEXT_ID + 4 ]
|
|
#else
|
|
ldr \rd, [\rn, #MM_CONTEXT_ID]
|
|
#endif
|
|
.endm
|
|
|
|
/*
|
|
* mask_asid - mask the ASID from the context ID
|
|
*/
|
|
.macro asid, rd, rn
|
|
and \rd, \rn, #255
|
|
.endm
|
|
|
|
.macro crval, clear, mmuset, ucset
|
|
#ifdef CONFIG_MMU
|
|
.word \clear
|
|
.word \mmuset
|
|
#else
|
|
.word \clear
|
|
.word \ucset
|
|
#endif
|
|
.endm
|
|
|
|
/*
|
|
* dcache_line_size - get the minimum D-cache line size from the CTR register
|
|
* on ARMv7.
|
|
*/
|
|
.macro dcache_line_size, reg, tmp
|
|
mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
|
|
lsr \tmp, \tmp, #16
|
|
and \tmp, \tmp, #0xf @ cache line size encoding
|
|
mov \reg, #4 @ bytes per word
|
|
mov \reg, \reg, lsl \tmp @ actual cache line size
|
|
.endm
|
|
|
|
/*
|
|
* icache_line_size - get the minimum I-cache line size from the CTR register
|
|
* on ARMv7.
|
|
*/
|
|
.macro icache_line_size, reg, tmp
|
|
mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
|
|
and \tmp, \tmp, #0xf @ cache line size encoding
|
|
mov \reg, #4 @ bytes per word
|
|
mov \reg, \reg, lsl \tmp @ actual cache line size
|
|
.endm
|
|
|
|
/*
|
|
* Sanity check the PTE configuration for the code below - which makes
|
|
* certain assumptions about how these bits are laid out.
|
|
*/
|
|
#ifdef CONFIG_MMU
|
|
#if L_PTE_SHARED != PTE_EXT_SHARED
|
|
#error PTE shared bit mismatch
|
|
#endif
|
|
#if !defined (CONFIG_ARM_LPAE) && \
|
|
(L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
|
|
L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
|
|
#error Invalid Linux PTE bit settings
|
|
#endif
|
|
#endif /* CONFIG_MMU */
|
|
|
|
/*
|
|
* The ARMv6 and ARMv7 set_pte_ext translation function.
|
|
*
|
|
* Permission translation:
|
|
* YUWD APX AP1 AP0 SVC User
|
|
* 0xxx 0 0 0 no acc no acc
|
|
* 100x 1 0 1 r/o no acc
|
|
* 10x0 1 0 1 r/o no acc
|
|
* 1011 0 0 1 r/w no acc
|
|
* 110x 0 1 0 r/w r/o
|
|
* 11x0 0 1 0 r/w r/o
|
|
* 1111 0 1 1 r/w r/w
|
|
*
|
|
* If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed:
|
|
* 110x 1 1 1 r/o r/o
|
|
* 11x0 1 1 1 r/o r/o
|
|
*/
|
|
.macro armv6_mt_table pfx
|
|
\pfx\()_mt_table:
|
|
.long 0x00 @ L_PTE_MT_UNCACHED
|
|
.long PTE_EXT_TEX(1) @ L_PTE_MT_BUFFERABLE
|
|
.long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
|
|
.long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK
|
|
.long PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED
|
|
.long 0x00 @ unused
|
|
.long 0x00 @ L_PTE_MT_MINICACHE (not present)
|
|
.long PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEALLOC
|
|
.long 0x00 @ unused
|
|
.long PTE_EXT_TEX(1) @ L_PTE_MT_DEV_WC
|
|
.long 0x00 @ unused
|
|
.long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_DEV_CACHED
|
|
.long PTE_EXT_TEX(2) @ L_PTE_MT_DEV_NONSHARED
|
|
.long 0x00 @ unused
|
|
.long 0x00 @ unused
|
|
.long 0x00 @ unused
|
|
.endm
|
|
|
|
.macro armv6_set_pte_ext pfx
|
|
str r1, [r0], #2048 @ linux version
|
|
|
|
bic r3, r1, #0x000003fc
|
|
bic r3, r3, #PTE_TYPE_MASK
|
|
orr r3, r3, r2
|
|
orr r3, r3, #PTE_EXT_AP0 | 2
|
|
|
|
adr ip, \pfx\()_mt_table
|
|
and r2, r1, #L_PTE_MT_MASK
|
|
ldr r2, [ip, r2]
|
|
|
|
eor r1, r1, #L_PTE_DIRTY
|
|
tst r1, #L_PTE_DIRTY|L_PTE_RDONLY
|
|
orrne r3, r3, #PTE_EXT_APX
|
|
|
|
tst r1, #L_PTE_USER
|
|
orrne r3, r3, #PTE_EXT_AP1
|
|
#ifdef CONFIG_CPU_USE_DOMAINS
|
|
@ allow kernel read/write access to read-only user pages
|
|
tstne r3, #PTE_EXT_APX
|
|
bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
|
|
#endif
|
|
|
|
tst r1, #L_PTE_XN
|
|
orrne r3, r3, #PTE_EXT_XN
|
|
|
|
orr r3, r3, r2
|
|
|
|
tst r1, #L_PTE_YOUNG
|
|
tstne r1, #L_PTE_PRESENT
|
|
moveq r3, #0
|
|
#ifndef CONFIG_CPU_USE_DOMAINS
|
|
tstne r1, #L_PTE_NONE
|
|
movne r3, #0
|
|
#endif
|
|
|
|
str r3, [r0]
|
|
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
|
|
.endm
|
|
|
|
|
|
/*
|
|
* The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
|
|
* covering most CPUs except Xscale and Xscale 3.
|
|
*
|
|
* Permission translation:
|
|
* YUWD AP SVC User
|
|
* 0xxx 0x00 no acc no acc
|
|
* 100x 0x00 r/o no acc
|
|
* 10x0 0x00 r/o no acc
|
|
* 1011 0x55 r/w no acc
|
|
* 110x 0xaa r/w r/o
|
|
* 11x0 0xaa r/w r/o
|
|
* 1111 0xff r/w r/w
|
|
*/
|
|
.macro armv3_set_pte_ext wc_disable=1
|
|
str r1, [r0], #2048 @ linux version
|
|
|
|
eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
|
|
|
|
bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits
|
|
bic r2, r2, #PTE_TYPE_MASK
|
|
orr r2, r2, #PTE_TYPE_SMALL
|
|
|
|
tst r3, #L_PTE_USER @ user?
|
|
orrne r2, r2, #PTE_SMALL_AP_URO_SRW
|
|
|
|
tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty?
|
|
orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
|
|
|
|
tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
|
|
movne r2, #0
|
|
|
|
.if \wc_disable
|
|
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
|
|
tst r2, #PTE_CACHEABLE
|
|
bicne r2, r2, #PTE_BUFFERABLE
|
|
#endif
|
|
.endif
|
|
str r2, [r0] @ hardware version
|
|
.endm
|
|
|
|
|
|
/*
|
|
* Xscale set_pte_ext translation, split into two halves to cope
|
|
* with work-arounds. r3 must be preserved by code between these
|
|
* two macros.
|
|
*
|
|
* Permission translation:
|
|
* YUWD AP SVC User
|
|
* 0xxx 00 no acc no acc
|
|
* 100x 00 r/o no acc
|
|
* 10x0 00 r/o no acc
|
|
* 1011 01 r/w no acc
|
|
* 110x 10 r/w r/o
|
|
* 11x0 10 r/w r/o
|
|
* 1111 11 r/w r/w
|
|
*/
|
|
.macro xscale_set_pte_ext_prologue
|
|
str r1, [r0] @ linux version
|
|
|
|
eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
|
|
|
|
bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits
|
|
orr r2, r2, #PTE_TYPE_EXT @ extended page
|
|
|
|
tst r3, #L_PTE_USER @ user?
|
|
orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
|
|
|
|
tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty?
|
|
orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
|
|
@ combined with user -> user r/w
|
|
.endm
|
|
|
|
.macro xscale_set_pte_ext_epilogue
|
|
tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
|
|
movne r2, #0 @ no -> fault
|
|
|
|
str r2, [r0, #2048]! @ hardware version
|
|
mov ip, #0
|
|
mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
|
|
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
|
|
.endm
|
|
|
|
.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0
|
|
.type \name\()_processor_functions, #object
|
|
.align 2
|
|
ENTRY(\name\()_processor_functions)
|
|
.word \dabort
|
|
.word \pabort
|
|
.word cpu_\name\()_proc_init
|
|
.word cpu_\name\()_proc_fin
|
|
.word cpu_\name\()_reset
|
|
.word cpu_\name\()_do_idle
|
|
.word cpu_\name\()_dcache_clean_area
|
|
.word cpu_\name\()_switch_mm
|
|
|
|
.if \nommu
|
|
.word 0
|
|
.else
|
|
.word cpu_\name\()_set_pte_ext
|
|
.endif
|
|
|
|
.if \suspend
|
|
.word cpu_\name\()_suspend_size
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.word cpu_\name\()_do_suspend
|
|
.word cpu_\name\()_do_resume
|
|
#else
|
|
.word 0
|
|
.word 0
|
|
#endif
|
|
.else
|
|
.word 0
|
|
.word 0
|
|
.word 0
|
|
.endif
|
|
|
|
.size \name\()_processor_functions, . - \name\()_processor_functions
|
|
.endm
|
|
|
|
.macro define_cache_functions name:req
|
|
.align 2
|
|
.type \name\()_cache_fns, #object
|
|
ENTRY(\name\()_cache_fns)
|
|
.long \name\()_flush_icache_all
|
|
.long \name\()_flush_kern_cache_all
|
|
.long \name\()_flush_kern_cache_louis
|
|
.long \name\()_flush_user_cache_all
|
|
.long \name\()_flush_user_cache_range
|
|
.long \name\()_coherent_kern_range
|
|
.long \name\()_coherent_user_range
|
|
.long \name\()_flush_kern_dcache_area
|
|
.long \name\()_dma_map_area
|
|
.long \name\()_dma_unmap_area
|
|
.long \name\()_dma_flush_range
|
|
.size \name\()_cache_fns, . - \name\()_cache_fns
|
|
.endm
|
|
|
|
.macro define_tlb_functions name:req, flags_up:req, flags_smp
|
|
.type \name\()_tlb_fns, #object
|
|
ENTRY(\name\()_tlb_fns)
|
|
.long \name\()_flush_user_tlb_range
|
|
.long \name\()_flush_kern_tlb_range
|
|
.ifnb \flags_smp
|
|
ALT_SMP(.long \flags_smp )
|
|
ALT_UP(.long \flags_up )
|
|
.else
|
|
.long \flags_up
|
|
.endif
|
|
.size \name\()_tlb_fns, . - \name\()_tlb_fns
|
|
.endm
|
|
|
|
.macro globl_equ x, y
|
|
.globl \x
|
|
.equ \x, \y
|
|
.endm
|