linux/arch/alpha/include/asm/core_lca.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

363 lines
11 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ALPHA_LCA__H__
#define __ALPHA_LCA__H__
#include <asm/compiler.h>
#include <asm/mce.h>
/*
* Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
* for example).
*
* This file is based on:
*
* DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
* Hardware Reference Manual; Digital Equipment Corp.; May 1994;
* Maynard, MA; Order Number: EC-N2681-71.
*/
/*
* NOTE: The LCA uses a Host Address Extension (HAE) register to access
* PCI addresses that are beyond the first 27 bits of address
* space. Updating the HAE requires an external cycle (and
* a memory barrier), which tends to be slow. Instead of updating
* it on each sparse memory access, we keep the current HAE value
* cached in variable cache_hae. Only if the cached HAE differs
* from the desired HAE value do we actually updated HAE register.
* The HAE register is preserved by the interrupt handler entry/exit
* code, so this scheme works even in the presence of interrupts.
*
* Dense memory space doesn't require the HAE, but is restricted to
* aligned 32 and 64 bit accesses. Special Cycle and Interrupt
* Acknowledge cycles may also require the use of the HAE. The LCA
* limits I/O address space to the bottom 24 bits of address space,
* but this easily covers the 16 bit ISA I/O address space.
*/
/*
* NOTE 2! The memory operations do not set any memory barriers, as
* it's not needed for cases like a frame buffer that is essentially
* memory-like. You need to do them by hand if the operations depend
* on ordering.
*
* Similarly, the port I/O operations do a "mb" only after a write
* operation: if an mb is needed before (as in the case of doing
* memory mapped I/O first, and then a port I/O operation to the same
* device), it needs to be done by hand.
*
* After the above has bitten me 100 times, I'll give up and just do
* the mb all the time, but right now I'm hoping this will work out.
* Avoiding mb's may potentially be a noticeable speed improvement,
* but I can't honestly say I've tested it.
*
* Handling interrupts that need to do mb's to synchronize to
* non-interrupts is another fun race area. Don't do it (because if
* you do, I'll have to do *everything* with interrupts disabled,
* ugh).
*/
/*
* Memory Controller registers:
*/
#define LCA_MEM_BCR0 (IDENT_ADDR + 0x120000000UL)
#define LCA_MEM_BCR1 (IDENT_ADDR + 0x120000008UL)
#define LCA_MEM_BCR2 (IDENT_ADDR + 0x120000010UL)
#define LCA_MEM_BCR3 (IDENT_ADDR + 0x120000018UL)
#define LCA_MEM_BMR0 (IDENT_ADDR + 0x120000020UL)
#define LCA_MEM_BMR1 (IDENT_ADDR + 0x120000028UL)
#define LCA_MEM_BMR2 (IDENT_ADDR + 0x120000030UL)
#define LCA_MEM_BMR3 (IDENT_ADDR + 0x120000038UL)
#define LCA_MEM_BTR0 (IDENT_ADDR + 0x120000040UL)
#define LCA_MEM_BTR1 (IDENT_ADDR + 0x120000048UL)
#define LCA_MEM_BTR2 (IDENT_ADDR + 0x120000050UL)
#define LCA_MEM_BTR3 (IDENT_ADDR + 0x120000058UL)
#define LCA_MEM_GTR (IDENT_ADDR + 0x120000060UL)
#define LCA_MEM_ESR (IDENT_ADDR + 0x120000068UL)
#define LCA_MEM_EAR (IDENT_ADDR + 0x120000070UL)
#define LCA_MEM_CAR (IDENT_ADDR + 0x120000078UL)
#define LCA_MEM_VGR (IDENT_ADDR + 0x120000080UL)
#define LCA_MEM_PLM (IDENT_ADDR + 0x120000088UL)
#define LCA_MEM_FOR (IDENT_ADDR + 0x120000090UL)
/*
* I/O Controller registers:
*/
#define LCA_IOC_HAE (IDENT_ADDR + 0x180000000UL)
#define LCA_IOC_CONF (IDENT_ADDR + 0x180000020UL)
#define LCA_IOC_STAT0 (IDENT_ADDR + 0x180000040UL)
#define LCA_IOC_STAT1 (IDENT_ADDR + 0x180000060UL)
#define LCA_IOC_TBIA (IDENT_ADDR + 0x180000080UL)
#define LCA_IOC_TB_ENA (IDENT_ADDR + 0x1800000a0UL)
#define LCA_IOC_SFT_RST (IDENT_ADDR + 0x1800000c0UL)
#define LCA_IOC_PAR_DIS (IDENT_ADDR + 0x1800000e0UL)
#define LCA_IOC_W_BASE0 (IDENT_ADDR + 0x180000100UL)
#define LCA_IOC_W_BASE1 (IDENT_ADDR + 0x180000120UL)
#define LCA_IOC_W_MASK0 (IDENT_ADDR + 0x180000140UL)
#define LCA_IOC_W_MASK1 (IDENT_ADDR + 0x180000160UL)
#define LCA_IOC_T_BASE0 (IDENT_ADDR + 0x180000180UL)
#define LCA_IOC_T_BASE1 (IDENT_ADDR + 0x1800001a0UL)
#define LCA_IOC_TB_TAG0 (IDENT_ADDR + 0x188000000UL)
#define LCA_IOC_TB_TAG1 (IDENT_ADDR + 0x188000020UL)
#define LCA_IOC_TB_TAG2 (IDENT_ADDR + 0x188000040UL)
#define LCA_IOC_TB_TAG3 (IDENT_ADDR + 0x188000060UL)
#define LCA_IOC_TB_TAG4 (IDENT_ADDR + 0x188000070UL)
#define LCA_IOC_TB_TAG5 (IDENT_ADDR + 0x1880000a0UL)
#define LCA_IOC_TB_TAG6 (IDENT_ADDR + 0x1880000c0UL)
#define LCA_IOC_TB_TAG7 (IDENT_ADDR + 0x1880000e0UL)
/*
* Memory spaces:
*/
#define LCA_IACK_SC (IDENT_ADDR + 0x1a0000000UL)
#define LCA_CONF (IDENT_ADDR + 0x1e0000000UL)
#define LCA_IO (IDENT_ADDR + 0x1c0000000UL)
#define LCA_SPARSE_MEM (IDENT_ADDR + 0x200000000UL)
#define LCA_DENSE_MEM (IDENT_ADDR + 0x300000000UL)
/*
* Bit definitions for I/O Controller status register 0:
*/
#define LCA_IOC_STAT0_CMD 0xf
#define LCA_IOC_STAT0_ERR (1<<4)
#define LCA_IOC_STAT0_LOST (1<<5)
#define LCA_IOC_STAT0_THIT (1<<6)
#define LCA_IOC_STAT0_TREF (1<<7)
#define LCA_IOC_STAT0_CODE_SHIFT 8
#define LCA_IOC_STAT0_CODE_MASK 0x7
#define LCA_IOC_STAT0_P_NBR_SHIFT 13
#define LCA_IOC_STAT0_P_NBR_MASK 0x7ffff
#define LCA_HAE_ADDRESS LCA_IOC_HAE
/* LCA PMR Power Management register defines */
#define LCA_PMR_ADDR (IDENT_ADDR + 0x120000098UL)
#define LCA_PMR_PDIV 0x7 /* Primary clock divisor */
#define LCA_PMR_ODIV 0x38 /* Override clock divisor */
#define LCA_PMR_INTO 0x40 /* Interrupt override */
#define LCA_PMR_DMAO 0x80 /* DMA override */
#define LCA_PMR_OCCEB 0xffff0000L /* Override cycle counter - even bits */
#define LCA_PMR_OCCOB 0xffff000000000000L /* Override cycle counter - even bits */
#define LCA_PMR_PRIMARY_MASK 0xfffffffffffffff8L
/* LCA PMR Macros */
#define LCA_READ_PMR (*(volatile unsigned long *)LCA_PMR_ADDR)
#define LCA_WRITE_PMR(d) (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
#define LCA_GET_PRIMARY(r) ((r) & LCA_PMR_PDIV)
#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
/* LCA PMR Divisor values */
#define LCA_PMR_DIV_1 0x0
#define LCA_PMR_DIV_1_5 0x1
#define LCA_PMR_DIV_2 0x2
#define LCA_PMR_DIV_4 0x3
#define LCA_PMR_DIV_8 0x4
#define LCA_PMR_DIV_16 0x5
#define LCA_PMR_DIV_MIN DIV_1
#define LCA_PMR_DIV_MAX DIV_16
/*
* Data structure for handling LCA machine checks. Correctable errors
* result in a short logout frame, uncorrectable ones in a long one.
*/
struct el_lca_mcheck_short {
struct el_common h; /* common logout header */
unsigned long esr; /* error-status register */
unsigned long ear; /* error-address register */
unsigned long dc_stat; /* dcache status register */
unsigned long ioc_stat0; /* I/O controller status register 0 */
unsigned long ioc_stat1; /* I/O controller status register 1 */
};
struct el_lca_mcheck_long {
struct el_common h; /* common logout header */
unsigned long pt[31]; /* PAL temps */
unsigned long exc_addr; /* exception address */
unsigned long pad1[3];
unsigned long pal_base; /* PALcode base address */
unsigned long hier; /* hw interrupt enable */
unsigned long hirr; /* hw interrupt request */
unsigned long mm_csr; /* MMU control & status */
unsigned long dc_stat; /* data cache status */
unsigned long dc_addr; /* data cache addr register */
unsigned long abox_ctl; /* address box control register */
unsigned long esr; /* error status register */
unsigned long ear; /* error address register */
unsigned long car; /* cache control register */
unsigned long ioc_stat0; /* I/O controller status register 0 */
unsigned long ioc_stat1; /* I/O controller status register 1 */
unsigned long va; /* virtual address register */
};
union el_lca {
struct el_common * c;
struct el_lca_mcheck_long * l;
struct el_lca_mcheck_short * s;
};
#ifdef __KERNEL__
#ifndef __EXTERN_INLINE
#define __EXTERN_INLINE extern inline
#define __IO_EXTERN_INLINE
#endif
/*
* I/O functions:
*
* Unlike Jensen, the Noname machines have no concept of local
* I/O---everything goes over the PCI bus.
*
* There is plenty room for optimization here. In particular,
* the Alpha's insb/insw/extb/extw should be useful in moving
* data to/from the right byte-lanes.
*/
#define vip volatile int __force *
#define vuip volatile unsigned int __force *
#define vulp volatile unsigned long __force *
#define LCA_SET_HAE \
do { \
if (addr >= (1UL << 24)) { \
unsigned long msb = addr & 0xf8000000; \
addr -= msb; \
set_hae(msb); \
} \
} while (0)
__EXTERN_INLINE unsigned int lca_ioread8(void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
unsigned long result, base_and_type;
if (addr >= LCA_DENSE_MEM) {
addr -= LCA_DENSE_MEM;
LCA_SET_HAE;
base_and_type = LCA_SPARSE_MEM + 0x00;
} else {
addr -= LCA_IO;
base_and_type = LCA_IO + 0x00;
}
result = *(vip) ((addr << 5) + base_and_type);
return __kernel_extbl(result, addr & 3);
}
__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
unsigned long w, base_and_type;
if (addr >= LCA_DENSE_MEM) {
addr -= LCA_DENSE_MEM;
LCA_SET_HAE;
base_and_type = LCA_SPARSE_MEM + 0x00;
} else {
addr -= LCA_IO;
base_and_type = LCA_IO + 0x00;
}
w = __kernel_insbl(b, addr & 3);
*(vuip) ((addr << 5) + base_and_type) = w;
}
__EXTERN_INLINE unsigned int lca_ioread16(void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
unsigned long result, base_and_type;
if (addr >= LCA_DENSE_MEM) {
addr -= LCA_DENSE_MEM;
LCA_SET_HAE;
base_and_type = LCA_SPARSE_MEM + 0x08;
} else {
addr -= LCA_IO;
base_and_type = LCA_IO + 0x08;
}
result = *(vip) ((addr << 5) + base_and_type);
return __kernel_extwl(result, addr & 3);
}
__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
unsigned long w, base_and_type;
if (addr >= LCA_DENSE_MEM) {
addr -= LCA_DENSE_MEM;
LCA_SET_HAE;
base_and_type = LCA_SPARSE_MEM + 0x08;
} else {
addr -= LCA_IO;
base_and_type = LCA_IO + 0x08;
}
w = __kernel_inswl(b, addr & 3);
*(vuip) ((addr << 5) + base_and_type) = w;
}
__EXTERN_INLINE unsigned int lca_ioread32(void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
if (addr < LCA_DENSE_MEM)
addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
return *(vuip)addr;
}
__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
if (addr < LCA_DENSE_MEM)
addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
*(vuip)addr = b;
}
__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
{
return (void __iomem *)(addr + LCA_IO);
}
__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
unsigned long size)
{
return (void __iomem *)(addr + LCA_DENSE_MEM);
}
__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
{
return addr >= IDENT_ADDR + 0x120000000UL;
}
__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
{
return (unsigned long)addr >= LCA_DENSE_MEM;
}
#undef vip
#undef vuip
#undef vulp
#undef __IO_PREFIX
#define __IO_PREFIX lca
#define lca_trivial_rw_bw 2
#define lca_trivial_rw_lq 1
#define lca_trivial_io_bw 0
#define lca_trivial_io_lq 0
#define lca_trivial_iounmap 1
#include <asm/io_trivial.h>
#ifdef __IO_EXTERN_INLINE
#undef __EXTERN_INLINE
#undef __IO_EXTERN_INLINE
#endif
#endif /* __KERNEL__ */
#endif /* __ALPHA_LCA__H__ */